i have Cent OS 5.2 CD (6) with me. I need to install it in my hard disk. I have already installed Windows XP in C: partition. I need to install Cent OS in D: partition. During installation process its asking for hard disk partition. In this regard, how to select the partition. I have C,D,E and F partitions and C,E and F are in common use. So i have to install Cent OS in D partition.
View 3 RepliesI want to install Cent OS5 on my machine. The Hard Disk is SATA. I want to discuss about how to custom partition the hard disk. In the old version there is a drop down list for manual partition the hard disk. like /,boot,swap,var etc etc. In the new version of centos 5 I can not see things like that. During installation process and in partition page there are things like:
Code:
Remove all partitions on selected drives and create default layout.
Remove Linux partitions on selected drives and create default layout.
Use free space on selected drives and create default layout.
Create custom layout.
When I choose custom layout it show me an error message. "An error has occurred-no invalid devices were found on which to create new files system. Please check your hardware for the cause of this problem."
I have just clone from my previous IDE hard disk to a bigger IDE hard disk with clonezilla. However, when I boot my system with the new hard disk using the installation disk, it says an error that "no linux partition found on hard disk".
View 4 Replies View RelatedI'm trying to resize a partition on an IDE hard disk to use the entire disk but can not get more than a 309GB partition. I can get 295, 300, 301, 302GB, etc... fine but start getting problems with anything over 309GB. I get the following error with 310GB or more:
error: block relocator should have relocated 533 Warning: You should reinstall your boot loader before rebooting. Read section 4 of the Parted User documentation for more information. I am using Slackware 12.1, GNU parted 1.8.8, ext2 filesystem.
Some output that may be of use:
root@asus:~# parted /dev/hdb print
Model: ST3500630A (ide)
Disk /dev/hdb: 500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
[code].....
i had installed fedora 14 into my new hardisk(1500gb) as new server the problem is how can i use the fdisk to partition the hardisk into two partition.
View 10 Replies View Relatedhave Debian "testing" installed. During the installation I selected to have a separate /home partition. / partition is ~10Gb, and my /home is ~300Gb. I didn't think I would need more than 10 for /.The other night, Debian informed me that I had 0 bytes remaining on /. I purged /temp an went about my day, only to be greeted with the message again the next morning.I've tried shrinking /home and increasing / via an Ubuntu live CD with GParted, but for some reason it did not want to work. However, I am beginning to suspect that my /home folder is occupying the / partition, and not the separate /home partition.Output of fdisk -l
Code:
Device Boot Start End Blocks Id System
/dev/sda1 * 1 1216 9764864 83 Linux
/dev/sda2 1216 38914 302803969 5 Extended
/dev/sda5 1216 1974 6082560 82 Linux swap / Solaris
/dev/sda6 1974 38914 296720384 83 Linux
On my embedded linux box, running on Linux Kernel 2.6.9 embedded with BusyBox utilities.
An Objective are follow:
1/ To figure out how many partitions are on the hard disk
2/ Create a extra partition about 10GB size on the hard disk
3/ Format the partition and mount var on that partition
Only utility to perform above operations I have "sfdisk" utility from BusyBox collection. Which get installed at the time of image flash in to ROM (8mb ROM size). The following is the root directory structure where hdd as a directory mounted /mnt/hdd1
Code:
~ > ls
bin etc lib proc sbin sys var
dev hdd mnt root share tmp var_init
Within /bin sfdisk utility can be used which I tried but no avail.
Code:
~ > sfdisk -l /dev/hda
/dev/hda: No such file or directory
sfdisk: cannot open /dev/hda for reading
~ > sfdisk -l /dev/sda0
/dev/sda0: No such file or directory .....
When I installed Lucid several months ago, I went ahead and let Ubuntu use the entire disk. Since then I have learned more about partitions and came to realize that I didn't have a separate /home partition, meaning that clean installs of new Ubuntu releases would wipe my data. I would like to carve my hard drive up from the LiveCD environment while preserving my current data and Lucid installation.
View 3 Replies View RelatedHP Netbook Mini 210
F14 xfce
I installed F14 xfce and using the entire disk.
Code:
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 97G 4.0G 92G 5% /
tmpfs 494M 212K 494M 1% /dev/shm
/dev/sda1 485M 49M 211M 11% /boot
/dev/sda4 193G 8.5G 175G 5% /home
After I have installed all my programs, I need to install windows and I need visual studio. So I was thinking of taking 20 GB from the /home directory and using that for windows. I can use gparted. However, many posters on here think it is best to use gparted by booting from the disk. However, I cannot do this, as I don't have any DVD drivers. And I can't really afford to buy one just for this reason. What is the best way to do this?
My computer has Windows and Ubuntu operating system and each is located in separate partition (dual boot).Now the disk space of Ubuntu partition is about to run out. I wonder how I can increase the disk space of Ubuntu partition.
View 9 Replies View RelatedThis is my situation, I had installed Ubuntu in my whole drive in 640Gig. Now, I want to partition it, without affecting my Ubuntu operating system. I just want 320Gig for my Ubuntu and 320 for my Windows.
I know how partition using Windows but from Linux, that I don't know.
I have installed 1tb hard drive and would like to partition as follows:
1) / - 20g
2) /swap - 6G
3) /photos /150g
4) /videos /500g
5) /audio /300g
After 2-3 partition an extended partition automatically created in which I am not able to create specified capacity i.e., say I want 150g of /photos partition, the /videos partition is automatically reduced and a free space at the end appears. Some free space is always there which i am not able to understand. Nevertheless i clicked to create, but I get an error viz. 'device not created'.
Newbie to Linux Ubuntu 10.10. Got the installation done on the wrong disk, How can I move the partition or uninstall?
View 1 Replies View RelatedI wanted to implement raid5 such that one partition is from my laptop's hard disk and others from other hard disks. After making one partition a raid partition, I rebooted the system. The computer stopped mid-way during booting, and brought me to the shell. On typing fsck -p, it told me an unexpected error occured in the partition which I had made for raid. Is there some condition that we cannot boot from a disk containing one of the raid partitions ?
View 1 Replies View RelatedI want to configure Name Server i.e., DNS to my red hat linux box in a production enviromnt.The ram is 2 GB and Hard Disk size is 200 GB. How much space should I give /var, /usr, /boot, /root and home partition. May be I am wrong in partition point of view while installing fresh red hat but to install for home purpose and server end is different. So kindly guide me the hard disk partition size to ready it for name server.
View 3 Replies View RelatedI have just install debian-7.7.0-i386 on my home pc. I want to configure samba 4 in my Debian box. How may I create Hard Disk partition of 500 GB for a samba server. The professional way i want.
View 3 Replies View RelatedWhat is the most efficient way to match the partition tables on two different hard disks?
I have saved the partition tables using dd command in linux.
The partition tables are from a Windows system.
I have a broken DVD drive and no others available right now to burn a DVD iso to so I'd like to use a empty hard disk instead.
I've tried Unetbootin but that only copies a few megabytes of files - the rest of the image data in the ISO is ignored.
I have verified the ISO is valid and working with VirtualBox. It's MD5 hash is also as expected. But I need to boot at the real bios not an emulated one.
I've also tried things like:
sudo cat /disk/image.iso > /dev/sdb1
and that got "Permission denied" -
My primary drive is 250GB and has the root, home and var (I'd read it's good to put var on a separate partition for MythTV which I'm planning on doing) on separate partitions. I have a second 1TB drive that I'll be using to backup the 250GB drive and also host less critical data. I've created two partitions on this drive, one 250GB and the other covering the rest of the drive. I'd like to move the Videos directory out of Home on the 250GB onto the 1TB drive but can't find a definitive way of doing this. Should I just follow this guide for moving the home folder to a new partition? Next question is when performing a backup of the 250GB drive how do I make sure it's going to the 250GB partition on the 1TB drive? Can the different partitions be mounted separately?
View 2 Replies View RelatedI set up a Windows partition and an Ubuntu partition in my laptop and each partition has about 60 gigabyte of disk space. Recently I keep getting messages that the disk space in my Ubuntu partition is almost full. How is it possible since I only have computer programs which I absolutely need?
View 1 Replies View RelatedBasically, I just installed Ubuntu over Windows Vista because I was getting fed up with the performance on it. During install I set up a partition, one for Ubuntu and one for data. However, my second, larger partition gives this error when I try to mount it...
Error mounting: mount exited with exit code 12: Failed to read last sector (976764927): Invalid argument
Hints: Either the volume is a RAID/LDM but it wasn't setup yet,
or it was not setup correctly (e.g. by not using mdadm --build ...),
or a wrong device is tried to be mounted,
or the partition table is corrupt (partition is smaller than NTFS),
or the NTFS boot sector is corrupt (NTFS size is not valid).
Failed to mount '/dev/sda1': Invalid argument
The device '/dev/sda1' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
I have installed vmware in windows server 2003 enterprise edition. When I installed I changed the default installation folder from c: drive to i: drive, as I do not have space in c: drive. After I captured red hat linux cd in vmware and reached partitioning section and continued I got a message like "an error has occured no valid devices were find on which to create new file systems, please check the hardware for the cause of the problem". The machine is IBM server....
View 1 Replies View RelatedShould the first bootable partition start from sector 1 on a hard disk? or Can it be created anywhere on the disk? I am using fdisk to create the bootable partition.
View 2 Replies View RelatedI have seen that is possible to boot from a USB stick and use a USB memory as hard drive.I have a server enable to hold 6 sata drives 3.5", But I want to use the 6 drives and make a Raid-5 setup for backups 5 -1 spare. /boot cannot be on a raid-5 level 0 or 1. But I want to have redundancy for my OS, them I can install Centos on a Raid-1 using 2 disk, which let me only 4 for the raid 5. I will run a backup I want to have a lot of space.
Using 4 disk for raid-5 2 TB I will have 6TB no spare, no spare is not a good option at least I will prefer 1 spare.Well, I was thinking, the server MoBo have USB support, if I open the box I can see the small entrances, If Centos let me installed on a USB memory drive, can I trust a USB memory stick?t night with bacula.
I want to add Fedora 14 to my triplecore 3GB RAM computer which has windows, Fedora 12 & ubuntu installed. What are the recommendation (e.g. size) for harddisk partition allocation? I can reuse the swap partition, can't I? Should I install Fedora 14 to a single partition (ie. /)? Should I use only ext4?
[Code]...
Caused by Used fdisk to delete the windows partition, in my dual boot. Then I could no longer log in to ubuntu, the partition table was some how courpt and I couldnt remount I then decided to use the windows partitioner from windows setup, as I thought it is so stupid, to reformat the partition where I had ubuntu. I wanted reinstall ubuntu, and I know that during the setup I could straighten out the mess I'd made.
Windows has now installed two 8mb one cylinder partitions on my HD. When I start the PC I get a !disk error occurred Press Crlt Alt Del to restart! This happens everytime. HD boot sequence is buggered, i guess.
I can boot from other devices. USB + CD. How when I use the windows disk to boot up I can see the 2 8mb partition, which it wont let me delete. How can I delete this via linux?
Also when I try to install ubuntu from the usb drive, it stalls just after the Preparing to install part. The next screen is when you set the partition table, swap drive etc. When I quit I get the following error !Process Glib WARNING getpuuid_r() failed due to unknown id!
The usb_liveCD does however mount my hard disk partitions and luckily I have managed to back everything up to an external.
results from df
/var/log# df
Filesystem 1K-blocks Used Available Use% Mounted on
aufs 766804 68140 698664 9% /
none 760892 244 760648 1% /dev
/dev/sdb1 3911856 712128 3199728 19% /cdrom
[Code].....
I've surprisely recognized that it's possible to write a filesystem on a hard disk without any valid partition. Well, the general advantages of partitions are clearly. But what are possible disadvantages or limitaions if you don't use a partition (e.g. if you want to use the complete space as one volume for data mining or so)?
View 14 Replies View Relatedafter installing Ubuntu on one WD 500 GB hard disk and after making mistake and pasting wrong code into Terminal:my OTHER WD 500 GB hard disk that was also in the system (I guess it was "hd1") - died.The problem must be, I guess, I typed wrong code: "hd1,1" instead of "hd0,0".)500 GB (NTFS) of data was on that other (non-Ubuntu) hard disk, and now I can not access it anymore. While booting, system gives "Hard Disk Error" warning and stops.One again: I installed Ubuntu od one hard disk and at the end of instalation I pasted wrong code for GRUB, giving address of another hard disk. Now that other hard disk has error and will not work
View 3 Replies View Relatedi accidently modified my file system of some partition in my hard disk from ntfs to fat...i havnt formatted the drive...but now i cannot mount this partition...
View 1 Replies View RelatedSo the first 10Gb of a 450GB NTFS partition have just accidently been written over with an Ext4 filesystem that spans the entire partition instead. all foolishness asside, what can be repaired. Now I know Ext4 likes to jot bits of meta-data down (inodes blocks) along the way, and this can be about 5% of drive capacity, that said, there's alot of small text files and stuff, coe files so forth that can surely be recovered
I've looked into magicrescue and testdisk, but they fall into the only two groups to exist:
1) Filesystem independent, that is search almost like a patern - well exactly like a pattern match, to find the header and footer of files.
2) Filesystem recovery tools, like, damaged bootsector, so forth
I need one, that will be able to extract files, Iunderstand this will be a hard task, but.... text files; surely that'll be easy, anyway. This is my backup drive, they''re both WD you see, anyway. This is important, given the coding is ASCII surely.