When I installed Lucid several months ago, I went ahead and let Ubuntu use the entire disk. Since then I have learned more about partitions and came to realize that I didn't have a separate /home partition, meaning that clean installs of new Ubuntu releases would wipe my data. I would like to carve my hard drive up from the LiveCD environment while preserving my current data and Lucid installation.
View 3 RepliesI'm trying to resize a partition on an IDE hard disk to use the entire disk but can not get more than a 309GB partition. I can get 295, 300, 301, 302GB, etc... fine but start getting problems with anything over 309GB. I get the following error with 310GB or more:
error: block relocator should have relocated 533 Warning: You should reinstall your boot loader before rebooting. Read section 4 of the Parted User documentation for more information. I am using Slackware 12.1, GNU parted 1.8.8, ext2 filesystem.
Some output that may be of use:
root@asus:~# parted /dev/hdb print
Model: ST3500630A (ide)
Disk /dev/hdb: 500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
[code].....
I'm using a dell XPS M1530 laptop with windows vista and ubuntu 10.04. Last week when I turned on my laptop I got an error saying internal hard disk not found. When I called dell support, I have been told that my hard disk is dead. I have few important stuffs in my hard disk for which I don't have any back. So I tried using ubuntu live CD to back up my data as in the link below.[URL]..I'm using ubuntu 10.04 live CD(64 bit). When I go to my places after booting from the live CD I can't see any partition showing my hard disk. I can see "Computer". When I go in it I can only see "File System" and nothing related to my partitions in my HDD. What should I do now? Do I need to mount my hard disk or is my HDD completely dead?
View 4 Replies View Relatedi had installed fedora 14 into my new hardisk(1500gb) as new server the problem is how can i use the fdisk to partition the hardisk into two partition.
View 10 Replies View Relatedi'm having some problems booting ubuntu 9.10 and i just want to backup my files and install it all over again.I want to access my old files from the ubuntu Live CD, because no kernel is working.Is there a way?. Just in case, i don't have partitions, so i don't have a 'home' one (but i'm going to
View 5 Replies View RelatedI'm having some problems booting ubuntu 9.10 and I just want to backup my files and install it all over again. I want to access my old files from the ubuntu Live CD, because no kernel is working. Is there a way?. Just in case, I don't have partitions, so I don't have a 'home' one (but I'm going to).
View 1 Replies View RelatedI downloaded Fedora-13-i686-Live-KDE.iso. Is there any way to install it from hard disk?
View 2 Replies View RelatedIs it possible to install the fedora 14 live to the hard disk and how?
View 7 Replies View RelatedRisk to native OS from Live CD?
when booted from linux live cd, all partitions of hard disk become accessible without any restriction. How to block this?
I have a Fedora 11 Installed in my machine with customized packages and scripts. Now I want to create an ISO/Image of that installed FC11, so it can be used to install in multiple machines.
View 3 Replies View RelatedI've a dual installation, ubuntu and XP and I've suddenly got a problem when I boot it gives the error "GRUB: Hard Disk Error", Tried to boot from Ubuntu live CD but I don't know how to correct grub from there. How can I correct the problem, maybe which live disk is better to correct such errors?
Consulted similar threads but couldn't find a solution for my problem as I'm booting from livecd and others were giving solution as if one can directly access the installation on hard disk, but whenever I try with ubuntu livecd it access live installation.
I have been frustrated attempting to get Grub2 to boot a Debian Live system from hard disk. Have set aside a 4gb partition /dev/sda1 to contain the Debian Live and some other recovery tools. I actually have them all working from a 4gb USB stick successfully, but getting it to work on my HDD has proved challenging. On USB, I have PartedMagic, Gparted, Grml, and of course my standard 6.01 Squeeze. I have also managed to get the Debian Live booting from that USB stick. Very slick.
However, I can NOT get Debian Live to boot from my HDD; altho all of the others above boot fine. Have tried it two ways - one using an iSO image, which is how it is done on my USB stick. The other attempt is to copy the entire contents of the ISO to a directory.
Here are my directory structures:
debian_live_gnome_squeeze_i386- contains the following: debian-live-6.0.1-i386-gnome-desktop.iso initrd.gz initrd.img vmlinuz which is how it is laid out on my USB stick debian_live - contains the files from the ISO image The error I get is something like "panic unable to find live filesystem" My grub.cfg snippet for the two methods I have tried - the 2nd menuentry is similar to how it works on the USB stick.
menuentry "Debian 6.01 Live (on /dev/sda1)" {
insmod part_msdos
insmod ext2
set root=(hd0,msdos1)
[code]....
Probly don't really need to get it working since PartedMagic can do almost everything I need for recovery and I can use the USB for reinstall or whatever else.
Is there a way to re-install grub on the master boot record of a hard disk using a live cd?If so will i have to configure it?I'm trying to install a linux distro on my ao751h(with poulsbo ) but i after installing it i can't boot.I get an error 15 or a flashing underscore.I have already tried ubuntu,debian,mint and slackware(LILO isn't compatible with poulsbo).Also,does anybody experience problems with the ubuntu 10.04 and 10.10 installers or is it only me?when i choose the language and keyboard settings the installation stop as it is and i get a crash report.
View 4 Replies View RelatedMy computer has Windows and Ubuntu operating system and each is located in separate partition (dual boot).Now the disk space of Ubuntu partition is about to run out. I wonder how I can increase the disk space of Ubuntu partition.
View 9 Replies View RelatedThis is my situation, I had installed Ubuntu in my whole drive in 640Gig. Now, I want to partition it, without affecting my Ubuntu operating system. I just want 320Gig for my Ubuntu and 320 for my Windows.
I know how partition using Windows but from Linux, that I don't know.
Its basically an old SATA Hard Drive with a Windows XP partition I was trying to sell.When my computer does the BIOS checks, it doesn't pass the SMART test (but I can boot it anyway), although I can't boot Linux in any way with this Hard Disk connected (I even tried Live CD distros, like Parted Magic).I can boot the XP partition from inside the disk, although I guess its pretty close to not being able to. Is there any way to "fix" this Hard Drive?
View 3 Replies View Relatedhave Debian "testing" installed. During the installation I selected to have a separate /home partition. / partition is ~10Gb, and my /home is ~300Gb. I didn't think I would need more than 10 for /.The other night, Debian informed me that I had 0 bytes remaining on /. I purged /temp an went about my day, only to be greeted with the message again the next morning.I've tried shrinking /home and increasing / via an Ubuntu live CD with GParted, but for some reason it did not want to work. However, I am beginning to suspect that my /home folder is occupying the / partition, and not the separate /home partition.Output of fdisk -l
Code:
Device Boot Start End Blocks Id System
/dev/sda1 * 1 1216 9764864 83 Linux
/dev/sda2 1216 38914 302803969 5 Extended
/dev/sda5 1216 1974 6082560 82 Linux swap / Solaris
/dev/sda6 1974 38914 296720384 83 Linux
On my embedded linux box, running on Linux Kernel 2.6.9 embedded with BusyBox utilities.
An Objective are follow:
1/ To figure out how many partitions are on the hard disk
2/ Create a extra partition about 10GB size on the hard disk
3/ Format the partition and mount var on that partition
Only utility to perform above operations I have "sfdisk" utility from BusyBox collection. Which get installed at the time of image flash in to ROM (8mb ROM size). The following is the root directory structure where hdd as a directory mounted /mnt/hdd1
Code:
~ > ls
bin etc lib proc sbin sys var
dev hdd mnt root share tmp var_init
Within /bin sfdisk utility can be used which I tried but no avail.
Code:
~ > sfdisk -l /dev/hda
/dev/hda: No such file or directory
sfdisk: cannot open /dev/hda for reading
~ > sfdisk -l /dev/sda0
/dev/sda0: No such file or directory .....
i have Cent OS 5.2 CD (6) with me. I need to install it in my hard disk. I have already installed Windows XP in C: partition. I need to install Cent OS in D: partition. During installation process its asking for hard disk partition. In this regard, how to select the partition. I have C,D,E and F partitions and C,E and F are in common use. So i have to install Cent OS in D partition.
View 3 Replies View RelatedMy primary drive is 250GB and has the root, home and var (I'd read it's good to put var on a separate partition for MythTV which I'm planning on doing) on separate partitions. I have a second 1TB drive that I'll be using to backup the 250GB drive and also host less critical data. I've created two partitions on this drive, one 250GB and the other covering the rest of the drive. I'd like to move the Videos directory out of Home on the 250GB onto the 1TB drive but can't find a definitive way of doing this. Should I just follow this guide for moving the home folder to a new partition? Next question is when performing a backup of the 250GB drive how do I make sure it's going to the 250GB partition on the 1TB drive? Can the different partitions be mounted separately?
View 2 Replies View RelatedI set up a Windows partition and an Ubuntu partition in my laptop and each partition has about 60 gigabyte of disk space. Recently I keep getting messages that the disk space in my Ubuntu partition is almost full. How is it possible since I only have computer programs which I absolutely need?
View 1 Replies View RelatedBasically, I just installed Ubuntu over Windows Vista because I was getting fed up with the performance on it. During install I set up a partition, one for Ubuntu and one for data. However, my second, larger partition gives this error when I try to mount it...
Error mounting: mount exited with exit code 12: Failed to read last sector (976764927): Invalid argument
Hints: Either the volume is a RAID/LDM but it wasn't setup yet,
or it was not setup correctly (e.g. by not using mdadm --build ...),
or a wrong device is tried to be mounted,
or the partition table is corrupt (partition is smaller than NTFS),
or the NTFS boot sector is corrupt (NTFS size is not valid).
Failed to mount '/dev/sda1': Invalid argument
The device '/dev/sda1' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
HP Netbook Mini 210
F14 xfce
I installed F14 xfce and using the entire disk.
Code:
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 97G 4.0G 92G 5% /
tmpfs 494M 212K 494M 1% /dev/shm
/dev/sda1 485M 49M 211M 11% /boot
/dev/sda4 193G 8.5G 175G 5% /home
After I have installed all my programs, I need to install windows and I need visual studio. So I was thinking of taking 20 GB from the /home directory and using that for windows. I can use gparted. However, many posters on here think it is best to use gparted by booting from the disk. However, I cannot do this, as I don't have any DVD drivers. And I can't really afford to buy one just for this reason. What is the best way to do this?
I have installed 1tb hard drive and would like to partition as follows:
1) / - 20g
2) /swap - 6G
3) /photos /150g
4) /videos /500g
5) /audio /300g
After 2-3 partition an extended partition automatically created in which I am not able to create specified capacity i.e., say I want 150g of /photos partition, the /videos partition is automatically reduced and a free space at the end appears. Some free space is always there which i am not able to understand. Nevertheless i clicked to create, but I get an error viz. 'device not created'.
I want to install Cent OS5 on my machine. The Hard Disk is SATA. I want to discuss about how to custom partition the hard disk. In the old version there is a drop down list for manual partition the hard disk. like /,boot,swap,var etc etc. In the new version of centos 5 I can not see things like that. During installation process and in partition page there are things like:
Code:
Remove all partitions on selected drives and create default layout.
Remove Linux partitions on selected drives and create default layout.
Use free space on selected drives and create default layout.
Create custom layout.
When I choose custom layout it show me an error message. "An error has occurred-no invalid devices were found on which to create new files system. Please check your hardware for the cause of this problem."
Newbie to Linux Ubuntu 10.10. Got the installation done on the wrong disk, How can I move the partition or uninstall?
View 1 Replies View RelatedI wanted to implement raid5 such that one partition is from my laptop's hard disk and others from other hard disks. After making one partition a raid partition, I rebooted the system. The computer stopped mid-way during booting, and brought me to the shell. On typing fsck -p, it told me an unexpected error occured in the partition which I had made for raid. Is there some condition that we cannot boot from a disk containing one of the raid partitions ?
View 1 Replies View RelatedI want to configure Name Server i.e., DNS to my red hat linux box in a production enviromnt.The ram is 2 GB and Hard Disk size is 200 GB. How much space should I give /var, /usr, /boot, /root and home partition. May be I am wrong in partition point of view while installing fresh red hat but to install for home purpose and server end is different. So kindly guide me the hard disk partition size to ready it for name server.
View 3 Replies View RelatedCaused by Used fdisk to delete the windows partition, in my dual boot. Then I could no longer log in to ubuntu, the partition table was some how courpt and I couldnt remount I then decided to use the windows partitioner from windows setup, as I thought it is so stupid, to reformat the partition where I had ubuntu. I wanted reinstall ubuntu, and I know that during the setup I could straighten out the mess I'd made.
Windows has now installed two 8mb one cylinder partitions on my HD. When I start the PC I get a !disk error occurred Press Crlt Alt Del to restart! This happens everytime. HD boot sequence is buggered, i guess.
I can boot from other devices. USB + CD. How when I use the windows disk to boot up I can see the 2 8mb partition, which it wont let me delete. How can I delete this via linux?
Also when I try to install ubuntu from the usb drive, it stalls just after the Preparing to install part. The next screen is when you set the partition table, swap drive etc. When I quit I get the following error !Process Glib WARNING getpuuid_r() failed due to unknown id!
The usb_liveCD does however mount my hard disk partitions and luckily I have managed to back everything up to an external.
results from df
/var/log# df
Filesystem 1K-blocks Used Available Use% Mounted on
aufs 766804 68140 698664 9% /
none 760892 244 760648 1% /dev
/dev/sdb1 3911856 712128 3199728 19% /cdrom
[Code].....
I have just install debian-7.7.0-i386 on my home pc. I want to configure samba 4 in my Debian box. How may I create Hard Disk partition of 500 GB for a samba server. The professional way i want.
View 3 Replies View Related