Am using Suse 10.2 for internet and e-mail server. currently all my users have access to the internet if they know how to setup their web browsers. how do i deny some users internet access so that a user can only access his/her e-mail but not internet.
View 1 RepliesI'm using squid for proxy server in FC6. I'm also using squidGuard for web-site access restriction. I want to do some exception now for website access. My network ip block is 192.168.7.0/24 and facebook.com is restricted for all with squidGuard, but i want to allow facebook.com only in 192.168.7.51/32.
my squidGuard.conf file looks like below:
I have configured squid proxy on centos 5.5 and some of my squid.conf file has following lines
Code:
http_access allow ncsa_users office
There are 3 users called "user034, user035 and user050" in the /etc/squid/squid_passwd file need to restricted access to internet except sites www.abc.com form anywhere in the lan. Once they logged in any ip, rule should apply.(that means no ip related acl, only user name related) How can I configure this in squid.
LinuxA & LinuxB
linuxA:eth0(10.1.1.1) connected linuxB:eth0 (10.1.1.2)
linuxA:eth1(202.1.20.45) connected internet
[code]....
I have a shared folder that has it's access restricted to certain users on a file server at work. Currently when I try to add a user I follow this process:
Right click the Folder, go to Properties
Click the "Access Control List" tab
Select a user from the "Participants List"
Click Add
For most users this process works fine but with one of them I get the following error:
"Could not add ACL entry: Invalid Argument"
I also tried a script that a former employee created which seems to employ this command:
setfacl -m u:<USER>:rw- <PATH>
Running the command with the correct user and path returns a similar "Invalid Argument" error.
We're using OpenSuse 10.2.
I have a linux box (fedora) with two ethernet cards eth1 and eth2. On eth1 I successfully configured a PPPOE internet connection. Such that from the server I can browse the internet. On eth2 I wired it to a wireless router essentially to provide the wireless cloud. On eth2 I also configured dhcp, such that the Linux box is both PPPOE and DHCP server.However my clients on the LAN cannot access the Internet.
On passing the routing command I get
Destination Gateway Iface
196.44.x.y 0.0.0.0 ppp0
192.168.1.0 0.0.0.0 eth2 (my subnet)
0.0.0.0 0.0.0.0 ppp0.
The router (functioning as a wireless access point mainly) has a fixed IP address of 192.168.1.2 and eth2 has IP address 192.168.1.1. The dhcp file running on Linux has been set with option router (Gateway) 192.168.1.1. I cannot figure out how to correctly set the routing table such that my clients on wireless can access the internet cloud. I googled and googled but no solid solution. Any suggestions?
I have a problem with the permission of the directories under /proc, they are readable and accessible only by Owner (they have permission 500 instead of the usual 555) As a consequence, the processes are visible only to the Owners or to Root. For exampleif I want to check if there is mysql
I see it only with the user mysql or with root because the directory has permission 500
This problem obstacles the functioning of some applications that should check the existence of some processes managed by other users. At the beginning all was working well. But after a while the problem appeared and I dont know which is the reason of it. how to restore the standard management of permissions of / proc?]
I have a Ubuntu server Maverick 10:10.
I've a mail server(Postfix) running on Slackware linux 12.1 . I need to configure a control panel so that one can create/delete/modify an email account as well as manage email alias.
View 1 Replies View RelatedI would like to set up a user account with no network access. Reason is that sometimes my little daughter plays with the computer (for example watching movies on dvd's) and I want to prevent internet access in case she plays unattended. Is there a simple way to do that? I am using ubuntu 10.04.
View 4 Replies View RelatedI have a Lucid Ubuntu installed on my home PC with two user accounts, AmHero and simple. I would like to have all internet access disabled when my kids login with the 'simple' userid. And yes, internet should work when I login using AmHero. I tried this:
[URL]
..but this does not work and gives some errors on the terminal.
I can paste the errors, though I am not sure this will even work as I found this in an old post.
My laptop is running Ubuntu 10.04. I have my own account (custom) and 1 desktop user account.
When I log in under my account and switch to the desktop user account, I can connect to the internet. However, if I start the laptop and log into the desktop user account first I get no internet connection and the same when I switch to my own (custom) account. What gives?
I feel little silly asking this, I accidently removed from my gnome panel my internet connection, volume control and battery indicator on F11. how can I add this back. It does not show up in the add to panel menu and the applications do not give you back the default feel.
View 1 Replies View RelatedI'm using a linux server where nat server is running. Local user are connected from this server. So is there in tool that i can check that local user getting internet? or how can i check that a user connected from linux server using internet or where he visited?
View 1 Replies View RelatedI only allow my users to access my web-server (apache) on working hours (mon to fri and 08:00 to 17:00).. how to configure my Apache?
View 2 Replies View RelatedI am new to Linux and need to add user access to a particular directory on a Linux server (SUSE 9.1).I am able to access the directory via telnet however I do not know the commands to add the user. userBFA needs readwrite access to the SMF directory. Please let me know if any additional information is needed.
View 5 Replies View RelatedI have a user account which is required to run as part of the operating system and as a service. I am currently attempting to install my companies software on an Ubuntu desktop via wine just for the purpose of finding out if it's do-able.
Is there a way, in Ubuntu, for a user account to be given the local rights assignment to act as part of the operating system and to function as a service in the background?
i have a xeon machine with ubuntu os machine specification is 3gb RAM 3 scsi hard drives each 73gb it have two ethernet cards one ethernet card is connected with adsl modem and the second is connected with LAN. now what is mikrotik doing for me is control access to bind mac adress with ip adress and control the band width for induvisual conection.
View 2 Replies View RelatedI have configured proftp. I want to access by the particular user. I have configured file, but not able to login. message getting login failed.
[root@localhost ftp]# vi /etc/proftpd.conf
# Use this to excude users from the chroot
DefaultRoot ~ !adm
# Use pam to authenticate (default) and be authoritative
AuthPAMConfig proftpd
AuthOrder mod_auth_pam.c* mod_auth_unix.c
[Code]...
I am using Sloaris OS.
Is there any way to check who (which users)can access a particular server?
Weather a user has access to a server or not??
I have a file server on my network. It is accessed mainly by linux machines throught NFS, but sometimes I need to access it from windows, and I managed to get Samba up and running with only one share with no password, which is what I want.My users have their "private" folders which are just chmodded 700, and under NFS it works fine, but on samba I get, of course, access denied.How can I configure samba so that it asks a password to access those directory? They can become separate shares, and have their own username and passwords (not the ones in /etc/passwd in the server), I don't care.
View 1 Replies View Relatedls -al /guests
I want to be able to assign the group "readers" read access to guests/c1 but it says access denied. but it shows r-x acsess. i want to be able to control who has read access and not just give it to everybody.
I have ubuntu based web server running in home which I use for varying purposes. Now I have ran to situation that I would like ton set "access control" for my server so that on main page user can login and then he/she sees that what sites on server he can access.
Basically this would be simple to do with .htaccess protection, but it would be per directory solution and this is not so easy to manage. However what I wish to get done here is that there would be access control check and an login prompt on webserver document root which would require to authenticate if heading to non public section of webserver.
currently I got my server root like this
/var/www (server root, no website and here would come access control point)
/var/www/site1 (primary website on my server to where most of visitors are going to)
/var/www/site2 (secondary site for specific things on my server)
/var/www/directory1/site3 (site which I do wish to have for closed group only)
/var/www/directory2/site4 (my online education and studying portal which I wish to control)
And I would want to allow everyone to access site1 and site2 without any restriction
Now what kind of solution would work here ? I am not sure and I don't have full techical knowledge of making this reality, There probably is multiple ways to do this and one could be .htaccess control, however what I wish to have is an easy to manage system which is also expandable.
In my computer networking class I have the option of doing a project where I set up a dns server for our classroom network. The problem is that this network is totally separate from the school network and we aren't allowed to connect it to the internet. I want all the machines to ping each other by name instead of ip using dns instead of host files on all 20 computers. I read on a site somewhere that you cannot do this because the dns queries will always go to the root servers. Is this correct? Is there some way I can do this using dns? The machine in question is using Ubuntu 9.04.
View 1 Replies View RelatedOk i want to access my server from internet, ok I have checked with my mobile internet provider (3) they say they dont block any ports, is it just a case of letting the firewall let external access to pc? ( no router just mobile dongle)And do i just ssh into external ip on ssh port
View 2 Replies View RelatedIs there a safe way for me to configure my server for access from any internet connection as well as from my home/office LAN? I'd like to be able to access file shares, webmin, the router console behind my Gateway for maintenance purposes. Access to Server Desktop itself would be a bonus.
View 12 Replies View RelatedI am using a CentOS 5.4 server for Snort (it's actually using the easyIDS config). I'm trying to modify some things, and I've noticed that I can't seem to download any files. WGET, FTP, etc... all just time out. It's not a network firewall issue, as I've been monitoring the logs and see no blocked traffic, and other machines on the subnet can get outside with no problems. I checked the Cent firewall using the setup command, and it says it is disabled as well. I'm very new to linux, so I'm wondering how I can troubleshoot this? The wget and ftp errors just say the connection timed out, but I'm not sure why.
View 2 Replies View RelatedI configured a FTP Server on Fedora Now I want to create a user for FTP Server which has no privileges to access any things outside his home directory .
Username is "Test1"
Home directory is /var/ftp/Test1
chmod 700 /var/ftp/Test1
chown Test1 /var/ftp/Test1
ubuntu terminal. I have installed mysql-server, but i have no access. I have set the password during installation process.
Used command:
mysql -u root -p
error message:
[code]....
I am using vicidialnow 1.2 VERSION: 2.0.4-122 and BUILD: 81011-0855 (CEntos Based Dialer). In all the way, it is working fine. I want to give the access of command /usr/sbin/mtr to a Normal System USer, which is not working according to my wish. I have make the entry in as sudo or make the soft link of /usr/sbin/mtr to /bin. But all in vain. And i am not in the condition to give the root access to the user.
View 4 Replies View RelatedHow can I give 1 user access to mount 1 particular filesystem? This is for Debian 6 64bit.
View 4 Replies View Related