I've just installed phpmyadmin on my bioLinux. When the logo screen shows http://localhost/phpmyadmin, and I try to log in it appears: #1045 Cannot log in to the MySQL server.
I've tried all possibilities. I install and reinstall it with the Synaptic Package manager, with and without password (using 'root' as username).
I'm new user from debian. I had try debian squeeze testing. Everything after I got installation was going well but, I got little problem with my phpmyadmin. Icannot login into phpmyadmin.
It said:
#1045 Cannot log in to the MySQL server
Connection for controluser as defined in your configuration failed.
I try a lot of tutorial from google and not work..
I setup opensuse 11.2 with lamp. I then installed the lastest version of phpmyadmin. All works great except I get an alert at the bottom of my phpmyadmin login page along the lines of "...cannot load mcrypt setting" I created a phpinfo.php page and I don't see any info on mcrypt. Doesn't appear to be installed. Is this an issue with my lamp setup or with phpmyadmin. I have read differing views. Some say its related to php others to phpmyadmin. Can anyone give me instruction on how to install and, if needed, configure mcrypt?
View 1 Replies View RelatedPermitRootLogin is set to "yes" but I cannot login as root. Is there anything else to do?
View 6 Replies View RelatedI have dual boot Windows/Ubuntu 9.10 and everything was running fine until recently when after booting to Ubuntu just showed me the system background image with mouse pointer and that was it - no login screen, nothing.
I tried swithing to console mode and logging in - it works fine, but swithing back to x just gives me the background image and the mouse pointer ( it is working though )
I've just installed phpmyadmin on my ubuntu home server. When I go to the http://(myip)/myphpadmin the logon screen shows up. I put in my root username peter and the password that I use for mysql which I also used when I setup phpmyadmin. I get an error message: "#1045 - Access denied for user 'Peter'@'localhost' (using password: YES)"Do I need to add something to a config file somewhere?
View 1 Replies View RelatedAfter all many times I've read the on line tutorial and How To Install PHPMyAdmin the result is always the same.I recently installed CentOS 5.5 and finished installing via yum the httpd, Mysql and PHP and have it run smoothlyBut when I've tried to download the phpMyAdmin-2.11.11-english.tar.gz.gz and untar it in /var/www/html no phpmyadmin directory in there. I am really confused becase based on the online how to's after I untar it I should move the decompressed file to phpmyadmin directory
View 4 Replies View RelatedI need details on installing phpMyAdmin on Linux suse 10.0. I have already installed MySQL 5.0 server as well as client.
View 5 Replies View RelatedI have updated my php from version 5.3.2 to version 5.3.3 on Centos OS. And after updating, when click to phpmyadmin-URL, it displays a blank page. I tried updating phpmyadmin to latest version, it still doesn't display phpmyadmin page. And when I clicked to [url], it downloaded automatically the file.
View 14 Replies View RelatedI have download the below tar.gz then extract it , and then put it to DocumentRoot to run the index.php, but unable to use it. What program that I need to install before running it?
phpMyAdmin-3.3.0-english
I just finished setting up a default Linux EC2 instance and would like to install PHPMyAdmin. I already have Apache and MySQL installed but cannot seem to install PHPMyAdmin. I tried using
sudo apt-get phpmyadmin but the command apt-get is not recognized.
I also tried sudo yum install phpmyadmin but that I get the message No package phpmyadmin available.
I'm totally new to MySQL / PHPAdmin and have been dropped in at the deep end regarding getting MySQL and phpMyAdmin upgraded... When I look at the RPM's I see:
php-mysql-4.2.2-17.2
php-4.2.2-17.2
php-imap-4.2.2-17.2
php-ldap-4.2.2-17.2
But when I go to the GUI I see: Welcome to phpMyAdmin 2.5.7-pl1 MySQL 4.0.16-standard-log running on localhost as root@localhost So to start with I'm not totally sure what version I'm running! I need to get these upgrades done due to PCI requirements so they are saying to upgrade to at least 4.0.25 I'm currently running RedHat9 so ideally need to know the easiest way to upgrade to a later 4.0 or 4.1 version.
how to find phpmyadmin read me file in redhat5
View 1 Replies View Relatedget phpMyAdmin work on LAMP installed on OpenSuse 10.1 !!
running: "rpm -q" command result:
apache2-2.2.0-21.7
php5-5.1.2-29.25.3
MySQL5.0.18
phpMyAdmin-2.9.1.1-2.3
webmin-1.360-1
My problem is when trying to connect to: "hxxp://www.m-y-d-o-m-a-i-n.com/phpMyAdmin" I reported Error 404: PHP Code: Object not found! The requested URL was not found on this server. If you entered the URL manually please check your spelling and try again. If you think this is a server error, please contact the webmaster. Error 404
[Code].....
Macbook air as local in-hands computer, connected at home over 802.11G->Verizon FIOS 15mbit down/5mbit up fiber. Also sometimes from other connections fast (university) and slow (hotels etc).Dell poweredge 750 server remotely wired GbE through 25mbit down 15mbit up fiber
So far I've tried to just ssh -X poweredge and run X apps, redirecting them to my local X server on Mac OS X. This worked great from my university's connection (over wifi) but worked poorly at home. Apparantly X protocol is very sensitive to latency.. windows wouldn't accept button presses for instance, would have to click many times. I've heard there are X settings and SSH settings I can use to decrease latency - does anyone know more about these??? As far as security, all I actually care about is encrypting my pw as I log in. It's not a sensitive situation. I suppose a solution would be to set DISPLAY on the Linux box to my IP and port except that it often changes and I'm always behind firewalls (some that I can put holes in like home, some I can't like school)I've also tried VNC which works "ok"
When using windows, which I haven't tried yet, are my options to remote desktop over SSH and VNC over ssh (run VNC server on XP) - or are there any more? What's likely to work best?Looking for an answer to tweaking the latency and also any completely fresh ideas or suggestions of tools that may be better suited to this situation
I burned the Knoppix ISO to a DVD in roder to boot my comptuer which has BSOD problems...
I've been told a couple of solutions that I couldn't access due to safe mode just going into a BSOD.
So I found Knoppix and it's great. but it won't connect me to the Internet. I use a router and it detects the connection i use. I click on it and type in my WEP key which I know is correct and it tries connecting. After a few seconds the screen pops in again asking me for my WEP key again.
Anyone know how I can connect to the Internet?
I am a complete newbie only had pc with linux installed for a week, for some stupid reason we had 8.10 pre-installed and decided to upgrade to 9.04 now we can't get past the gnome login screen asking for user name and password. Linux was already installed by mesh with a userename and password which we didn't change,we are really stumped as we can't get past this logon screen.
View 8 Replies View RelatedI am using f11 and cannot run any VCD.
I tried to run it via totem, which says "Could not open location; you might not have permission to open the file."
but I have the read permission for sure. while on mplayer, it says "seek failed" and exits.
any solution?
The solution should be capable to use intranet only (no communication should traverse the inernet). It would be of an advantage if it would support conferencing. And if it's possible it'd be fine if it'd be free.
One solution which comes to my mind is jabber, but I do not have any experience with it... what's your oppinion on that? What other solutions are there?
I just installed Ubuntu 10.04 on my Mom's HP laptop. She loves the way I set things up for her. It's a one click solution for accesing her banking, Facebook, Email and SKYPE. I would like to be able to add something else to the panel whereby she would just click once and a telephone pad would appear for her to dial phone numbers so that she can call people from her computer.
View 3 Replies View RelatedI have been using various operating systems on this computer.
At the moment I am using AntiX Mepis. I switched to Linux because my Windows used to freeze all of a sudden after a few hourse or even minutes.
Now my Linux was quite stable for a few days but again, it freezes in a few minutes when I use a Window Manager. In the terminal without using any Window Manager it never freezes.
Can anyone tell me the solution to this? code...
i have Elastix (( Centos )) machine runing and have many configrations i need to take iso iamge from it and use it directly for any othe machine ? How to this step bby step ??
View 1 Replies View RelatedI have a LAMP server configured. Yesterday, I had a test.php file displaying everything fine. I transferred some files over to the new server and now I can't connect to the test page, webmin, or phpmyadmin. I think it has something to do with Apache but Im not sure what to do next. I have restarted Apache, MySql and all services are running.
View 3 Replies View RelatedI've decided to install Fedora 14 on my Late 2008 Macbook Pro (model 5,1), but when attempting to boot from the live cd, all I get is the main boot menu, then I briefly get a grey screen with a blinking white cursor, then the screen just goes black. The computer is still running, and I can still hear the cd drive, but I have no video. I've seen the tutorials for installing Fedora 14 on a 5,1 macbook pro, and I know it's been done successfully with no mention of such issues.
View 5 Replies View RelatedI have double boot windows xp and linux mint 10 on a dell desktop. from the start, linux mint would not completely shutdown. the windows xp shuts down completely. i have tried the commands sudo poweroff, sudo telinit 0 and sudo shut down -h now. not one works. i also have updated to the dvd version and is updated on everything else.
i do not know how to go to bios or perform any programming tasks. may i then request that instructions, if any, be detailed?
i have the following script which takes as input parameter a webpage and extract the emails from it. The results are correct but i was wondering whether i could rewrite it in a better, 'cleaner' manner. I think my for loop is a bit. primitive and also each email is printed twice
Code:
#!/bin/bash
echo $1
echo "The script starts now."
echo "Hi, $USER!"
wget $1 -O webpage.txt
awk '
{
for (i=1;i<=NF;i++) {
[Code].....
There are a lot of backup solutions, many scripts based of rsync. The problem is not a lot of them encrypt your data before syncing it. I have a USB hard drive and I want to backup my user folder /home/myuser/ to the external drive What software will allow me to create incremental backups which are encrypted with relative ease
View 2 Replies View RelatedI would like to grep two numbers out of a text file, and divide them.
Here is the script code...
It feels like grep saves a new line too? or what is happening? i simply can't divide them, as it handles the variables as they are empty (and prints the two numbers although they were not printed
I have created software raid 5 configurations on the second harddrive its working fine and i have edited fstab file for auto mounting when it reboot but when i reboot the computer raid doesn't work i have to re-create the arrays by typing "mdadm --create" command again and mount again manually ,is there anywhere i can do this once without retyping the commands again after rebooting and i am also using redhat 5
View 1 Replies View RelatedI am running du -h --max-depth=1 and it is hanging, presumably processing a large folder.
Could you give me a list of the large folders in the Redhat OS?
Is there any way to check if du has failed or is hanging/processing a folder?
How long should du -h --max-depth=1 take on 40GB of data?
Solved, it was taking a long time on a 29gb /var/log folder