We have the below script, to check the process MEDT, if it doesn't run , then it will send a message immediately. the same script, if I want to check if it is continously running for more than 1 hour, then it should do the action mentioned below.
View 2 RepliesIs there a way in zabbix to monitor whether a process is running( up/ down)
i am using zabbix 1.8.4
I have Fedora Linux 13 64bit system. I use System Monitor to check which process is taking how much memory and cpu. Normally I have dozens of Chrome and Firefox windows open. The Processes tab shows which process is taking how much cpu/ram resources but I unfortunately there is no option like right click and make the window active that matches the PID (the one process that I have currently highlighted). Usually there is a chrome process taking up 30 or 40 percent of CPU while dozens other chrome processes taking much less cpu. I must determine which chrome window ( or any application which has multiple instances running) is taking that much CPU time.
View 1 Replies View RelatedI am planning to take up RHCE exam, but i have a doubt about the exam duration does it consist of 2 section where section 1 is for 2.5 hrs and section 2 is for 3 hours (total 5 1/2 hours) or does it consist of single section of 3.5 hours.
View 1 Replies View RelatedI have made a shell script as below to find that how much time is taking between one command to another.
View 3 Replies View RelatedI would like to subtract the end time with a start time in bash. How can I do it?
Here's a script of example of what I want:
I'm trying to set up my Thunderbird 3.1.8 (running on Ubuntu 10.04 LTS) to play a .wav file of my choice when new mail arrives. The file I've chosen is 8,8 KB in size and lasts 3 seconds. I've selected the "Play a sound" + "Use the following sound file" options in my Preferences, but only the first second (if that) of the sound gets played - both when I click the "Play" button in the Preferences menu to test it, as well as when receiving mail. Restarting the program with my new settings doesn't help.
Actual question(s):
- Is there a limit on the size/duration of the sound one can use for such a signal in this program?
- Is there any way to modify this limit?
Is there any way to monitor one process' CPU usage and RAM usage over time on Linux? I am trying to change to a cheaper VPS and need to work out what level of CPU and RAM I need!
View 2 Replies View RelatedI am looking for a simple process monitor to monitor CPU, ram, swap usage of selected processes and log the information to a csv file at a specified interval.
Or is there a way pipe the information I want from top to a csv file?
I use linux and Unix and I want to monitor the memory usage for process. To prevent memory leakage and out of memory of the system. Any command or sytnax , have more better and presentable data than below command about memory usage of one process ?
View 3 Replies View RelatedHow can I periodically monitor memory usage of a process in linux.Can it be dumped in some file.So that later I can see what was the process behaviour in taking memory.
View 2 Replies View Relatedthere's this process on my system monitor that opens and closes by itself it does not have a description or a name and makes my hard drive spin like hell
View 1 Replies View RelatedI have looked for and found several tools to show a system's total network usage. I have not, however, been able to find any that show this information in the context of individual processes. Do any such tools for linux exist?
View 4 Replies View RelatedI have a few AWS instances (linux micro, fedora-like) that occasionally (4x every 24hours) trip a CloudWatch monitor for CPU utilization. alarm => 85% at 5 minute slices.
The problem with this is that we're unsure WHAT is causing it. I have an idea to poll cpu usage every 5 mins and if there's a spike (eg, => 85%) then dump some process table stuff exposing the offenders.
I want to monitor the process running and execute a command if some new process start. For example send a mail if any new process start.
View 1 Replies View RelatedI have Fedora Linux 13 64bit system. I use System Monitor to check which process is taking how much memory and cpu. Normally I have dozens of Chrome and Firefox windows open. The Processes tab shows which process is taking how much cpu/ram resources but I unfortunately there is no option like right click and make the window active that matches the PID (the one process that I have currently highlighted). Usually there is a chrome process taking up 30 or 40 percent of CPU while dozens other chrome processes taking much less cpu. I must determine which chrome window ( or any application which has multiple instances running) is taking that much CPU time. So can some one help me to solve this problem?
View 1 Replies View RelatedKsysguard has always before shown a process table on one tab and the system load charts on a second tab. Loading Ksysguard produces an error message: "The file /home/*/.kde4/share/apps/ksysguard/Processtable.sgrd does not contain valid XML." That file contains nothing, as it's size in Dolphin is 0. Have updated KDE in Yast; removed Ksysguard 4 (which installed ver. 3) then re-installed ver 4. Still lack the process table.
This is OpenSuse 11.4 on a Toshiba A665 laptop. In other respects the system works perfectly, well almost. I'm examining a large number of files recovered by scalpel from a disk image created by ddrescue. This problem appeared while working through the nnnnnnnn.doc files. Most of them open in LibreOffice, but some produce an error message ("Not a Word 95 document"), open as slides (which is OK), or seem to freeze LO (with a CPU core at 100% in ksysguard). Lacking the process table, I'm having trouble killing the LO process (ps doesn't deliver the process number as expected; still studying it).
I recently did a fresh install of 10.04 and am experiencing a really weird issue. I right click on an audio file (in my case an MP3) and pull up the properties. I select the Audio tab and look at the duration for the file. All of my file (which play just fine) are showing a zero duration. Is this a known bug and is there a fix for this somewhere?
I should note that these are all valid MP3 files, with duration time previously showing under a 9.10 install.
Is it possible to set how quickly the notifications in KDE4's notifications widget will disappear? They stick around a couple of seconds too long for my taste.
View 9 Replies View Relatedone tell me the internal working of kill command. that is how it kills a process internally or from where it picks file to continue its process.
View 3 Replies View RelatedI have a high priority service that I start with sudo nice -n -10 process. This process does not need superuser rights though, except for the priority elevation. But nice requires superuser privileges to elevate priority.
View 3 Replies View Relatedsend the details raid configuration how to use in linux el5 and how to indentify the raid degrade process and how to rebuilt the process.
View 4 Replies View RelatedCode:
#include <stdio.h>
#include <unistd.h>
#include <signal.h>
[code]....
Description of what the code does or what i intended to do:
1. Created a child process from parent process using 'fork()'
2. Sent a signal 'SIGALRM' from child process to parent process using 'sigqueue' function.
(The Third parameter of 'siqueue' function contains the message (message msg) which the child process wants to send to the parent process.'msg' is a stucture instance containing a) pid of child and b) string) 5. Print the 'msg' sent by child process inside the signal handler function 'sig_action_function' of the parent process I am getting some junk value when this line is executed
Code:
printf("%d
",msg->cpid);
I expected to get the pid of child process, which the child process sent to parent process through the signal.
I have squeeze installed on an AMD machine. i compiled the kernel based on the config file in the /boot.
it was surprisingly much time:
This was the first time using AMD machine, i had experience with some P4 machine to have much shorter kernel compilation time.
The machine:
what do i do in the wrong way? or is it the "feature" of the this old AMD?
On Debian 5.0 I wish record the duration of the dial-up connections. To connect I use Wvdial through Gnome PPP graphic interface. Do you know a program with graphic interface or that it creates a simply log file with for each connection: date-time start connection, date-time end connection, telephone number called?
View 3 Replies View Relatedas we all know Process Scheduler does Process scheduling and its a process as well. I was just wondering that if this happens then the Process "Process Scheduler" should be a part of Process queue as well.
So if there are 5 process are there in Process queue & process scheduler is administrating them then since its also a process, once it puts a process under RUN state it should itself go inside queue because at one instant only one process can get executed on a processor. This is quite confusing for me. Please help me out. I tried to search on this but could not find any relevant topics.
How do you find the parent process of zombie processes?
When the child process is something where the parent is not entirely obvious...
Is there some way to list processes in tree format or something?
I have a process running on Linux.When i do ps -eaf | grep <myProcess>, it show muliple entries for <myProcess> with different pids for each entry.Kindly tell me what could be the reason for a process having multiple pids?
View 1 Replies View RelatedI have had no problems whatsoever with audio in ubuntu 10.10. Both input and output have worked great, but alas now there's a problem.
I recently installed ardour2 with jack (using apt-get) but for some reason, anytime I start ardour2 (which starts jack implicitly) all audio stops on the whole computer. That is my computer goes silent. As soon as I exit ardour2 audio resumes.
Also, although this will probably resolve itself when I resolve the other problem, when exporting a project to audio file from ardour2 it exports silence for the entire duration, even when ardour2 is exited and audio has resumed.
I'm no linux novice, so I'm not afraid of command line solutions (I prefer them actually) however I know nothing about jack or audio editing in linux whatsoever, so if you could be very specific about jack terminology that would be great.
Ubuntu 10.04
When I execute a sudo or gksu evolution (e.g. synaptic package manager) I find that the escalated privileges remain in effect for a period of time. Sometimes, not often, the notifier applet shows an icon indicating that escalated privileges are in effect.
What I would like to know:
What is the default amount of time which escalated privileges remain in effect on my system?
Is it possible, if so how, to change this amount of time?