OpenSUSE :: Ksysguard (Monitor) Lacks Process Table Because ProcessTable.sgrd Is Empty
Jul 13, 2011
Ksysguard has always before shown a process table on one tab and the system load charts on a second tab. Loading Ksysguard produces an error message: "The file /home/*/.kde4/share/apps/ksysguard/Processtable.sgrd does not contain valid XML." That file contains nothing, as it's size in Dolphin is 0. Have updated KDE in Yast; removed Ksysguard 4 (which installed ver. 3) then re-installed ver 4. Still lack the process table.
This is OpenSuse 11.4 on a Toshiba A665 laptop. In other respects the system works perfectly, well almost. I'm examining a large number of files recovered by scalpel from a disk image created by ddrescue. This problem appeared while working through the nnnnnnnn.doc files. Most of them open in LibreOffice, but some produce an error message ("Not a Word 95 document"), open as slides (which is OK), or seem to freeze LO (with a CPU core at 100% in ksysguard). Lacking the process table, I'm having trouble killing the LO process (ps doesn't deliver the process number as expected; still studying it).
View 2 Replies
ADVERTISEMENT
Oct 12, 2010
I was thinking to do my music producing completely on linux and found a plethora of good tools for it. The thing is I have two monitors and instead of launching manually every little app each time I feel creative, I want to make a script that launches all my favorite apps.
So long I have written this little bash script:
Code:
#!/bin/bash
#Start my audio programs for music production
(qjackctl --start)&
(hydrogen --nosplash)&
sleep 1
ardour2
So what it does is that it starts the jack server, then hydrogen and lastly ardour2. The thing is that I want hydrogen to start in the second monitor but don't know how. I have devilspie but I didn't have any luck on finding some command to choose display. I am aware of the --display flag that some programs have like firefox but hydrogen doesn't have it. Btw I use a different X server on each screen. is there a universal way to launch ANY kind of program on a specific display?
View 6 Replies
View Related
Aug 12, 2010
FC13 and Ubuntu 10.04 - both 64bit. Hardware: MBP 5,4 Here's how I do the install:
1. Boot to Ubuntu LiveCD and wipe disk.
2. Create a msdos partition table via gparted
3. Reboot from FC13 or Ubuntu install disk and continue to install with installer suggested partition scheme.
4. Reboot and get an error that says "uncompression error -- System halted"
Variation that I have tried:
1. After #3, boot into FC13 or Ubuntu rescue mode, chroot to hd image and run:
# grub
> root (hd0,0)
> setup (hd0)
> quit
2. Create a 250MB partition where I installed refit and use rest of the disk for Ubuntu or FC13. After installation, both Ubuntu and FC13 halt at the same error.
3. gptsync fails with no refit installed. Finds GPT table empty. LiveCDs from both distros work fine so ruling out hardware issues like bad memory etc.
View 1 Replies
View Related
Jun 11, 2011
There is no pkgconfig file, so "configure" and "make" commands does not find all the time automatically needed files even they exist.
View 9 Replies
View Related
Sep 28, 2010
Have a pureftp server on OpenSuse 11.2 (x86-64 bit), KDE 4.3.5, dual core AMD. It responds to ftp clients on another machine (openSuse 11.1) within the same subnet (192.168....) and delivers lists of directories, changes directories, etc. The clients (gftp, jftp, filezilla, dolphin--tried them all) are unable to upload to the server (after a successful log-in on the server as a user, not root) with an error message that seems to indicate an inability to open the file on the client machine. Also logged in as user on the client machine. From FileZilla:
Command:STOR FCtinyLogo2.jpg
Response:553-Can't open that file: Permission denied
Response:553 Rename/move failure: No such file or directory
What am I missing in permissions? The directory where the JPG is located belongs to the user who is signed in, its in his home directory. The users on the two machines are not the same.
View 1 Replies
View Related
May 3, 2010
Kmail 1.13.2 Problem on startup, error is from nepomuk, data storage. "cannot find Redland backend, nepomuk is disabled until fixed. Also see the following error from the akonadi console:
100503 10:00:15 [Note] Plugin 'ndbcluster' is disabled.
100503 10:00:15 InnoDB: Started; log sequence number 0 31413862
100503 10:00:15 [Warning] Can't open and lock time zone table: Table
'mysql.time_zone_leap_second' doesn't exist trying to live without
[code]....
View 2 Replies
View Related
Dec 7, 2010
I installed the proprietary nVidia driver on my Fedora 14 x86_64 laptop, but then went back to the nouveau driver. Now System Monitor won't launch. From the command line I get:
$ ksysguard
ksysguard: error while loading shared libraries: libnvidia-tls.so.260.19.21: cannot open shared object file: No such file or directory
I reinstalled it, which went without error, but I still get the same error as above. I also tried installing libnvidia-tls, but yum just said there is no such package. Of course, the package is part of the nVidia proprietary driver package, but I don't want to reinstall that. I have the KDE desktop installed, but normally I boot to Gnome. How can I get ksysguard to run again?
View 2 Replies
View Related
Apr 7, 2010
I am trying to find out what's my soundcard model as my sound is not working very well.I am using YasT2 - > Hardware Information to find out what is the problem. The probing hardware process starts but gets stuck at the probing monitor phase (49%). I have tried to rerun the process after rebooting the pc. I have let the process to run for a few hours but still it was stuck at the 49%What should I try to do to skip this obstacle and get information about my sound hardware.
View 4 Replies
View Related
Jun 25, 2010
I have an Ubuntu server in which a file is dumped every hour and a new file for the next hour and the process continues. If there is any problem due to which the creation of file stops then empty files are created every minute till the process is killed & started again. I need help to make a shell script to check if the empty files are being created and then kill the process and start it again.It would be a great help if anyone can help me regarding this.
View 9 Replies
View Related
May 5, 2010
I recently installed Ubuntu 10.04 alongside OSX on my unibody aluminum macbook. I've been setting it up, but I was wondering if there were any applets that could display things like CPU temps (maybe even RAM usage? I'm thinking along the lines of the iStat menubar app, but of course I'm willing to try out anything). I tried searching the Software Center, but couldn't quite find what I was looking for. I was exploring the keyboard shortcuts, and I was wondering if there was a way to set a shortcut to empty the trash? Like in OSX they have shift+apple+delete.
View 2 Replies
View Related
Apr 8, 2010
I am looking for a simple process monitor to monitor CPU, ram, swap usage of selected processes and log the information to a csv file at a specified interval.
Or is there a way pipe the information I want from top to a csv file?
View 2 Replies
View Related
Jun 14, 2011
We have the below script, to check the process MEDT, if it doesn't run , then it will send a message immediately. the same script, if I want to check if it is continously running for more than 1 hour, then it should do the action mentioned below.
View 2 Replies
View Related
Aug 8, 2010
last time i used debian it was missing some commands that were necessary for the stuff i was trying to install on itdebian has no software repositories (not as extensive as ubuntu but i guess thats why its so user friendly) and finding depencancies that are up to date is really hard seeing as though that the ubuntu site says is out of dateone of the commands that i really wished was on there was the MAKE commands like make
make installnd i guess there are other make commands but is there an easy way (i am more than willing to try it the hard way if i have to)
View 14 Replies
View Related
Jun 13, 2011
Is there a way in zabbix to monitor whether a process is running( up/ down)
i am using zabbix 1.8.4
View 2 Replies
View Related
Jan 24, 2011
I use linux and Unix and I want to monitor the memory usage for process. To prevent memory leakage and out of memory of the system. Any command or sytnax , have more better and presentable data than below command about memory usage of one process ?
View 3 Replies
View Related
Sep 2, 2010
How can I periodically monitor memory usage of a process in linux.Can it be dumped in some file.So that later I can see what was the process behaviour in taking memory.
View 2 Replies
View Related
Oct 4, 2010
there's this process on my system monitor that opens and closes by itself it does not have a description or a name and makes my hard drive spin like hell
View 1 Replies
View Related
May 9, 2010
I have looked for and found several tools to show a system's total network usage. I have not, however, been able to find any that show this information in the context of individual processes. Do any such tools for linux exist?
View 4 Replies
View Related
Jun 14, 2011
I have a few AWS instances (linux micro, fedora-like) that occasionally (4x every 24hours) trip a CloudWatch monitor for CPU utilization. alarm => 85% at 5 minute slices.
The problem with this is that we're unsure WHAT is causing it. I have an idea to poll cpu usage every 5 mins and if there's a spike (eg, => 85%) then dump some process table stuff exposing the offenders.
View 9 Replies
View Related
Jan 31, 2010
I want to monitor the process running and execute a command if some new process start. For example send a mail if any new process start.
View 1 Replies
View Related
Feb 26, 2011
I have Fedora Linux 13 64bit system. I use System Monitor to check which process is taking how much memory and cpu. Normally I have dozens of Chrome and Firefox windows open. The Processes tab shows which process is taking how much cpu/ram resources but I unfortunately there is no option like right click and make the window active that matches the PID (the one process that I have currently highlighted). Usually there is a chrome process taking up 30 or 40 percent of CPU while dozens other chrome processes taking much less cpu. I must determine which chrome window ( or any application which has multiple instances running) is taking that much CPU time. So can some one help me to solve this problem?
View 1 Replies
View Related
Feb 26, 2011
I have Fedora Linux 13 64bit system. I use System Monitor to check which process is taking how much memory and cpu. Normally I have dozens of Chrome and Firefox windows open. The Processes tab shows which process is taking how much cpu/ram resources but I unfortunately there is no option like right click and make the window active that matches the PID (the one process that I have currently highlighted). Usually there is a chrome process taking up 30 or 40 percent of CPU while dozens other chrome processes taking much less cpu. I must determine which chrome window ( or any application which has multiple instances running) is taking that much CPU time.
View 1 Replies
View Related
Oct 23, 2010
i need to prepare a presentation for that i have to copy a table from [URL] to my power point slide. but when i am copying it i am just getting a table with single column. is there a method to import the contents from web page table to my presentation table?
View 2 Replies
View Related
Apr 9, 2011
I am running 64 Bit Debian, 6.0 install with VLC and libavcodec52, libavformat52, and libavdevice52 installed. I also installed recordmydesktop which creates an ogv file, and I would like to use VLC to convert the file to an MP4. Then I can add it to a project under Open Shot Video Editor.
I get the following errors when I try to convert the file: Streaming / Transcoding failed: It seems your FFMPEG (libavcodec) installation lacks the following encoder: H264 - MPEG-4 AVC (part 10). If you don't know how to fix this, ask for support from your distribution. This is not an error inside VLC media player.Do not contact the VideoLAN project about this issue.
Streaming / Transcoding failed: It seems your FFMPEG (libavcodec) installation lacks the following encoder: MPEG AAC Audio. If you don't know how to fix this, ask for support from your distribution. This is not an error inside VLC media player. Do not contact the VideoLAN project about this issue. I've used Google to search for the error message, searched on the forum.videolan.org, and searched on this forum. So far, I've not found a lead to the solution. What am I overlooking/missing?
View 6 Replies
View Related
Apr 7, 2010
I have a working build of crosstool - it was built for gcc 3.4.3 using glibc 2.3.5 going from 32-bit x86 linux to 64-bit alpha linux. As far as I can tell -- it compiles correctly (output of alpha emulation matches expected) but it has a major flaw. When I use the cross compiler and attempt to add detailed debug information, it compiles, but does not have the debug information. For example, when I execute:
> /home/leporter/crosstool/gcc-3.4.3-glibc-2.3.5/alpha-unknown-linux-gnu/bin/alpha-unknown-linux-gnu-gcc-3.4.3 -g -o hello main.c
OR
> /home/leporter/crosstool/gcc-3.4.3-glibc-2.3.5/alpha-unknown-linux-gnu/bin/alpha-unknown-linux-gnu-gcc-3.4.3 -gstabs -o hello main.c
I get a working alpha binary for hello world. BUT - when I run objdump - this is what I get
> /home/leporter/crosstool/gcc-3.4.3-glibc-2.3.5/alpha-unknown-linux-gnu/bin/alpha-unknown-linux-gnu-objdump -g hello
hello: file format elf64-alpha
/home/leporter/crosstool/gcc-3.4.3-glibc-2.3.5/alpha-unknown-linux-gnu/bin/alpha-unknown-linux-gnu-objdump: hello: no recognized debugging information
Frustratingly - if I use my x86 gcc version 3.4.6 to do the compilation (same arguments, just using the x86 compiler, not the cross compiler) - it correctly embeds the debug information.
View 2 Replies
View Related
Oct 21, 2010
I got this definition:"a process that replaces a series of related, specific routes in a route table with a more generic route." honestly I found it not so clear.. I want to know if this definition is correct and also more details about this subject..
View 1 Replies
View Related
Dec 11, 2010
I regret to see the lack of facility for Guided install into the 'largest unpartitioned space on the drive'. I cannot find it either in the Desktop CD, or the Alternate CD. It seemed to disappear in Ubuntu 10.04 Desktop CD but did stay in the Alternate CD. But in 10.10 it seems to have gone completely.I found it a really *very* useful facility for myself, and also when helping others - when all I had to say to them was - 'delete the existing partition/s, do nothing more expect then, install using the facility 'Install into the largest unpartitioned space on the drive'.
View 4 Replies
View Related
Oct 22, 2010
This is a triple-monitor setup with two video cards, where the mouse pointer gets "stuck" if it tries to cross from one video card to the next one. It worked correctly in openSUSE 11.2 and doesn't work in openSUSE 11.3 with the same xorg.conf. This is a 64-bit openSUSE 11.3 with xorg 7.5-11.3 (the openSUSE prepackaged version). I've already tried NVidia drivers 256.53-16.1 (the openSUSE NVidia repository version) and 260.19.12 (the latest off of the NVidia website).
This is the same xorg.conf that I used successfully in openSUSE 11.2. I tried a new automatically generated xorg.conf using nvidia-settings and it had the same problem. This forum won't let me upload the relevant files, but here: [URL] is a tar-ball with my xorg.conf, Xorg.*.log, /var/log/messages, and the NVidia debugging output.
View 3 Replies
View Related
Jan 15, 2011
just setup suse 11.3 , put on the Nvidia 19.29-22.1 drivers via yast , no kms is set in inetd , nomodeset on grub boot line etc... Even tried installing the driver " the hard way " dual monitors come up, setup xinerama to "Extend" my desktop , and the main monitor ( right side ) is good, visually the left monitor (2ndary) is good.. but whenever I move my mouse over to the left screen the mouse pointer dissapears, flickers along the right hand border of that screen... and if i move the cursor back to the original screen i have to really fight to get it back to the main screen....Copy of my xorg.conf , still very basic...
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04.
nvidia.com) Wed Dec 8 12:27:27 PST 2010
[code].....
View 9 Replies
View Related
Jan 21, 2011
I have just installed Os 11.3, it is my first time to try Linux. Install went fine have Dual Boot Win7 and openSuse 11.3 KDE I have a 26" TFT TV as Monitor 1 DVI and Dell 16" as Monitor 2 VGA all working fine . Autoconfig started and TV display vanished, install finished and went into display settings to check problem and for some reason it is saying both displays are on my 16" Dell. I will Add Screen Shot to show problem. wanted to switch to Linux for years but never had the guts, i was hoping to learn Linux with this distro and when have a grip on it drop windows and use Linux as Primary.
View 4 Replies
View Related
