I have a process running on Linux.When i do ps -eaf | grep <myProcess>, it show muliple entries for <myProcess> with different pids for each entry.Kindly tell me what could be the reason for a process having multiple pids?
View 1 Replies
I have been running to a strange problem. For a few days, a few times a day something seems to take over my machine. Suddenly I can't type, or the key shows up about 5 seconds are being pressed, music players halt, etc. In anticipation, I had top and htop running. Sure enough, when this business begins htop reports all 8 cores firing at near 100% for a few minutes. However, top is telling me nothing about who is too blame. The cup%sy on top shows heavy usage, but the top processes are nothing remarkable, mostly just top and htop and conky, all running at around 1 or 2% on average. I am a bit puzzled as to why I can't see the cpu hog so that I figure out what is going on. My question then: Are there some processes (in kernel space?) that don't show up in top, yet which could be hogging the cpu?
View 3 Replies View Relatedone tell me the internal working of kill command. that is how it kills a process internally or from where it picks file to continue its process.
View 3 Replies View RelatedHow can we run the linux process like tar on multiple core? For example if we want to build the kernel we can use -j4 to distribute process of 4 different core. Is it possible to run long time consuming process on mulitple core?
View 1 Replies View Relatedtrying to fork multiple child but the program does not go as i want...
My code :
Code:
#include <stdio.h>
#include <sys/types.h>
#include <unistd.h>
[code].....
I have a high priority service that I start with sudo nice -n -10 process. This process does not need superuser rights though, except for the priority elevation. But nice requires superuser privileges to elevate priority.
View 3 Replies View Relatedsend the details raid configuration how to use in linux el5 and how to indentify the raid degrade process and how to rebuilt the process.
View 4 Replies View RelatedCode:
#include <stdio.h>
#include <unistd.h>
#include <signal.h>
[code]....
Description of what the code does or what i intended to do:
1. Created a child process from parent process using 'fork()'
2. Sent a signal 'SIGALRM' from child process to parent process using 'sigqueue' function.
(The Third parameter of 'siqueue' function contains the message (message msg) which the child process wants to send to the parent process.'msg' is a stucture instance containing a) pid of child and b) string) 5. Print the 'msg' sent by child process inside the signal handler function 'sig_action_function' of the parent process I am getting some junk value when this line is executed
Code:
printf("%d
",msg->cpid);
I expected to get the pid of child process, which the child process sent to parent process through the signal.
as we all know Process Scheduler does Process scheduling and its a process as well. I was just wondering that if this happens then the Process "Process Scheduler" should be a part of Process queue as well.
So if there are 5 process are there in Process queue & process scheduler is administrating them then since its also a process, once it puts a process under RUN state it should itself go inside queue because at one instant only one process can get executed on a processor. This is quite confusing for me. Please help me out. I tried to search on this but could not find any relevant topics.
How do you find the parent process of zombie processes?
When the child process is something where the parent is not entirely obvious...
Is there some way to list processes in tree format or something?
I have some random files in a folder. I want to rename all of the files in a batch process. I have a text file that contains the Currentname of all the files in the folder, as well as a text file with all of the Newname of files in the folder. I want to replace Currentnames with Newnames.
For example, here are the names of the files in the folder:
1.mp4
2.mp4
3.mp4
I have a text file with the Currentname of all the files in the folder:
1.mp4
2.mp4
3.mp4
I have a text file with the proper Newname of the file:
a.mp4
b.mp4
c.mp4
I want to rename Currentname with Newname in the folder. So when I go to the folder the Newname of the files are:
a.mp4
b.mp4
c.mp4
I want ro ran new commandy after sungrid finish his task.Exp:qsub -q bla command1; command2 command2 start only when job of command1 finished.
View 9 Replies View RelatedI've been running my shellscript for about half an hour now. It's taking longer than I thought to process all the data. I have the process ID of it. Is it possible to save the process and log out then log in and continue the process? I know how to pause a process using kill -pause pID and continue it using kill -cont pID. But that only work if you don't log out after pausing it.
View 5 Replies View RelatedI've some file with .sh extensions that runs some softwares.Now,how do I stop running that filesI know we run the command ./start_tomcat.sh to start the apache.Is there any command to stop that file/process or is it just kill the process to stop the process
View 2 Replies View RelatedFirst post from a very new Linux user....I am trying to create a BASH script that will allow user to provide multiple directory names, Checks if the directory exists and if not create the directory.
I am using the following code:
Which works fine as long as the user enters a single directory name. How can I modify this so it will process all directory names user enters on the read response?
My swag is that my VLC has a memory leak and that is why itkeeps dying on my system while playing audio .m3u Playlists of flac filesVLC 1.1.4 Jan 25 2011, ubuntu 10.10, Dell Lattitude laptop D600This is what I see in the syslog
Feb 9 09:24:12 ubugj-DellD600 kernel: [ 4995.881387] Out of memory: kill process 2353 (vlc) score 239282 or a child
Feb 9 09:24:12 ubugj-DellD600 kernel: [ 4995.881401] Killed process 2353 (vlc)
[code]...
I have created a simple download schedular with source-code give below :
---------------------record_strokes.sh-------------------
touch /home/student/packs/lynx/logfile
lynx -cmd_log /home/student/packs/lynx/logfile
[code]....
there's this process on my system monitor that opens and closes by itself it does not have a description or a name and makes my hard drive spin like hell
View 1 Replies View RelatedI want to kill parent process after "fork()" method. but if I kill parent process with "exit(0)" method, main() thread is terminated as well so child prosess doesn't work anymore. Is there any way to kill only parent process without affecting to child process?
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
[code]....
I have a shell script to identify whether the process is running or not. If the process is not running, then I execute another script file to run my application. Below is my script and saved this script as monitorprocess.sh Code: #!/bin/bash
result=$(ps -ef | grep -v grep | grep "applicationname.sh" | awk '{print $2}')
echo $result
if [ "$result" == "" ];
[code]...
Is there any difference in cpu usage for process in init.rc(runs automatic when boot is happened) and manually running process. Will these both have same priority by default...?
View 1 Replies View RelatedI tried googling but didn't get any answer for this.I have a process called "abc" and it is running with PID "123".I have a putty session opened with PID "999".I am giving kill -TERM 123 from putty session.My process "abc" before dying it should catch the PID of the terminal which provided TERM signal to it.Is there any way to find this out
View 2 Replies View RelatedI tried the google and browsing the known bugs in the sticky before posting this thread.On boot the machine is pegged at 100%. It is a dual-core with 4GB of ram and is running 10.04, 64bit. Also, as time goes on it eats up all the ram till theres maybe 32mb free. What happens is there are multiple 4-10+ identical processes running. seem to be gnome related.The machine sits idle on my floor and runs samba and apache/mysql/gallery for my test website that no on but myself visits.
View 5 Replies View RelatedI recently inherited a server that I'm now looking after, and when browsing the running processes I came across a number of processes labelled:"/usr/local/apache-2.2.6/bin/.libs/lt-httpd -k start"
At any one time there are between 10 and 15 of them running.Googling the issue has been surprisingly unhelpful... can anybody even tell me what this process is, much less what sort of issue might result in multiple running copies? I'm running Debian Etch (release 4.0).
I have created a simple download schedular with source-code give below :
---------------------record_strokes.sh-------------------
touch /home/student/packs/lynx/logfile
lynx -cmd_log /home/student/packs/lynx/logfile
[code]....
So, this is a simple download scheduler program code. Which creates multiple threads of the downloading process - wget (i could also have used 'curl' instead 'wget').Can you debug this code?
I'm porting C++ application from ARM to MIPS platform. It works now, but I see some strange timing problems. I've seen now that My app process is called multiply time. Here is "top" output:
Mem: 24592K used, 102084K free, 0K shrd, 0K buff, 16864K cached
CPU: 0% usr 99% sys 0% nice 0% idle 0% io 0% irq 0% softirq
Load average: 4.02 2.17 0.95
PID PPID USER STAT VSZ %MEM %CPU COMMAND
1888 1875 admin R 12096 10% 98% ./my_app.exe
code....
I don't see something like this when I compile it for x86, nor ARM.On MIPS I use uClibc instead of glibc.
I need a command to get the process name by process id.
View 2 Replies View RelatedI scanned hundreds of pages in gray scale and would like to batch process them to B&W. You can do this using the gimp GUI. what it does is get rid of all the gray shading from reflections off the paper when scanned. So you get crisp white backgrounds with black text and diagrams. I would like to simply do this to the entire group directory at one time as it would be quite a lot of effort to open them and do them one by one.
View 3 Replies View RelatedI have a shell script to identify whether the process is running or not. If the process is not running, then I execute another script file to run my application. Below is my script and saved this script as monitorprocess.sh
Code:
#!/bin/bash
result=$(ps -ef | grep -v grep | grep "applicationname.sh" | awk '{print $2}')
[code]...
I'm trying to install on HP ML 350 F13 G6 with standard array controller and 3 drives in raid 5. Well, when the installation process get the screen that shows the files copied (all copied...) , it freezes and does not advance more. Perhaps groped a firmware update? Other distributions are installed correctly.
View 2 Replies View Related
