General :: Make Command Still Not Working?
Jan 2, 2011
I'm running Ubuntu 10.04 and while trying to install the Wacom driver and kernel I get to the step after ./config and get this message when I use make.
make: *** No targets specified and no makefile found. Stop.
I've tried looking up on it and they all say that build-essentials should be installed first. So I looked into it and I found out that it's already installed along with the make command itself.
Anyway to get Ubuntu to recognize it as installed?
View 8 Replies
ADVERTISEMENT
Jan 21, 2010
Based on previous forum discussions, I tried to install cygwin with 'make' installed from develop during installation. I can even see 'make.exe' in bin folder, but still while running the make command, it still shows error.
I was confused in one other part. Should I put the bin folder in some specific location or just wherever it is placed during cygwin installation? I was running VIC model, do I need to place the bin folder inside VIC source code folder.
View 2 Replies
View Related
Feb 27, 2011
i found the make command not working in the gnome terminal of opensuselinux 11.3
View 3 Replies
View Related
Dec 14, 2010
I have build-essential, but make command not working I have build-essential package, but there is still a problem with make command. When I run it in a directory, it shows following message: mudassar@javaDev-1:~/Desktop/gwget-0.99$ make make: *** No targets specified and no makefile found. Stop. When I explicitly specify a make file, the following message appears:
[Code].....
View 1 Replies
View Related
Feb 23, 2010
I am doing some embeded linux work in ARM 9263.So I need to make a image for that board.But when I using one command "make uImage" I am getting the following error.
make: arm-linux-gcc: Command not found
CHK include/linux/version.h
make[1]: `include/asm-arm/mach-types.h' is up to date.
CHK include/linux/utsrelease.h
HOSTCC scripts/basic/fixdep
code....
View 4 Replies
View Related
Oct 25, 2010
a friend of mine gave me a .tar.gz file which contains a bunch of C sourcefiles and a makefile. I don't get how to use the make command to create an executable out of those files. What arguments do I have to give the make command?
View 5 Replies
View Related
Feb 10, 2011
When I type PWD how do I make it run the pwd command?
View 3 Replies
View Related
May 20, 2011
I have just started using backtrack. I an a fresher into this field. In one of the assignment, I am giving command make stack.c in which it gives me the error makefile:l: *** missing separator. Stop.
View 2 Replies
View Related
May 24, 2011
I'm trying to make and make install a driver for my wireless, every time, though, I use the make command, it'll start at 0 and cound almost up to 200,000 and then the computer freezes. I've tried different drivers, same result. I've tried ndiswrapper but that didn't work either.
View 8 Replies
View Related
May 13, 2009
I have installed cygwin to my windows xp machine. I typed the commmand in cygwin shell it shows "command not found". How can i install make command in cygwin
View 2 Replies
View Related
Jul 4, 2010
When we,
./configure
make
make install
Where are the programs installed?
View 2 Replies
View Related
Feb 19, 2011
I found this script [URL].. Basically this is a shortcut for cd-ing my file system..
I can type "save nm" where "nm" is any short name for the directory, like "blog" or "blg" Then whenever I want to go to nm I'll just use 'cd nm'
But it is not working out for me, I get this error every time I enter save:
bash: save: command not found
bash: parse_git_branch: command not found
So How can I make this command work?
View 1 Replies
View Related
Jul 22, 2011
I have a problem to make a shell, using mail command DestMail= cat /opt/scripts/maillist.txt mail -s"SUBJECT" $DestMail -- -r xxxxx@gmail.com < /opt/scripts/test.txt where: maillist.txt contain email adresse separated by comma test.txt mail text this script can eval DestMail variable!!
View 1 Replies
View Related
Feb 26, 2010
I am completely new to linux and am trying to run a Fortran program for class. I typed in "make C=R" and it ran through a long list of things and then came up with that error.
View 1 Replies
View Related
May 26, 2011
Consider that I am building my application in Linux shell using make command but somehow the build fails. Is there any way I can find out that the build has failed (of course looking at shell for error messages will do the job for me but I don't want that). Is there any flag make or shell will set/reset if such failure occurs ?
View 5 Replies
View Related
Feb 26, 2010
i was wondering if it is possible too use the DD command to make an image file of my blackberry 8330?i need it of the onboard memory and not the external memory card.
View 1 Replies
View Related
Mar 4, 2010
How can i make a script to send the output of top command in mail.
i have to mail the output to another person , tell me how can i do this
View 3 Replies
View Related
Aug 16, 2010
I installed the CUnit framework which is a .tar.gz file from the bash shell in cygwin.
make gives me an error saying:
make install works
make clean works
I am not able to compile but install works I do not know if it is installed and as to where it is installed
when i checked it gives me a list of header files and also the lib files. I do not know as to why the make command is not working in cygwin. When i go to the bin directory it shows the make command.
View 5 Replies
View Related
Feb 11, 2010
I'm using a program called easystroke to invoke commands from mouse gestures - typically to launch an application. 'gnome-terminal', for example. If I already have a gnome-terminal window open, and I invoke the gnome-terminal gesture, I'd like to be setting focus to the already running instance, rather than spawn a new instance, which is of course what happens now. (I am actually more interested in this for my gmail chrome app shortcut, and other larger apps.)
I'm very new to ubuntu and linux in general, but I was hoping there might be a nifty command I could wrap around my launch command that would produce this behavior. (I'm imagining some kind of singleton app list keeper program that consumes my command line, checks if it's already in the list, transfers focus to the running process if it is (and if that process is still running), or else spawns a new process and then adds it to its list using the the command line as a key.)
View 2 Replies
View Related
Aug 9, 2010
I make a script to automate burning backup files on dvd. It works fine if I start it from root user, but if I start it. From cronjob do noting. I try on growisofs the option -use-the-force-luke=force but nothing happens. I check the env of cron:
HOME=/root
LOGNAME=root
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
PWD=/root
SHELL=/bin/bash
SHLVL=1
XDG_SESSION_COOKIE=3e0d70f7b71074a0b1fff4bb4aa97d13-1281297181.926502-724038309
_=/usr/bin/env
and it seems ok i've got my script in /usr/local/bin and growisofs in /usr/bin
Code of my script below:
#!/bin/bash
bkup_path='/bkrepo/';
prefix='PAR*';
totdimfile=0
for FILE in $(/bin/ls -r $bkup_path$prefix)
do
dimfile=`/bin/ls -l $FILE | /usr/bin/awk -F " " '{print $5}' `
let "totdimfile += dimfile";
if [ "$totdimfile" -lt "4700000000" ]
then
NAMEFILE=`/bin/ls -l $FILE | /usr/bin/awk -F " " '{print $8}' `
ALLNAMEFILE="$ALLNAMEFILE $NAMEFILE";
fi
done
/usr/bin/growisofs -use-the-force-luke=force -Z /dev/scd0 -R -J $ALLNAMEFILE
/usr/bin/growisofs -M /dev/scd0=/dev/zero
/usr/bin/eject
end code of my script
View 1 Replies
View Related
May 22, 2010
I run a sever 24/7/365 with Debian 5.0.4 (lenny) GNOME 2.22.3. It seems that the HDD is beginning to fail as it starting to clunk & you can hear it spinning up & down. I had lots of help in setting up the server, and i am not that good with linux...but i am learning all the time I have a spare HDD lying around, and i am wondering if its possible to use it to make a "exact working copy" of the HDD whats failing ? The spare HDD actually has XP on it, but i cannot see this preventing it from being used ?As my knowledge is still very little with Linux, and its important for me to replace the HDD, can anyone point me in the right direction to copying failing HDD ?? Also is it possible to then fit the new HDD into my server and it will work straight away ? This is to prevent any added downtime on my 24/7/365 server.
View 14 Replies
View Related
Aug 18, 2009
I want to run a linux command with apache through web browser and that's is not working. and it's working properly when I execute this command through terminal, where is the problem?
NOTE: apache have the privileges to execute the command
View 7 Replies
View Related
Mar 19, 2010
I'm new to LinuxQuestions and this is my first post. I'm trying to build rrdtool to install Cacti and encountered the following problem: 'make' step returns an error messages:
Code:
./.libs/librrd.so: undefined reference to `xmlTextReaderGetParserLineNumber'
collect2: ld returned 1 exit status
What I have doneDownload and build the latest version of pkg-config, glib, pixman, cairo, pango, atk, gtk+ from official sites.
Download rrdtool source
Set PKG_CONFIG_PATH correctly
[Code]...
There is actually another problem with the computer which is "The Nautilus application has quit unexpectedly" everytime I open File Browser application or right-click>Properties a file/directory. This happen only after installing cairo and pango and I don't know how to revert to old version. Since there are a lot of log files so I'm very confused. Can someone give me a direction on how to resolve this?
View 3 Replies
View Related
Jan 24, 2011
I use a program which makes a large image which I have to scroll to view. The program has no way to save the image, and I have no access to the source to modify it. The only way I have to get the image from the program is by screenshot. My goal is to save the full size image without having to piece together individual screenshots. I'm using this script to try taking a screenshot:
#!/bin/bash
window=$(wmctrl -l | grep "Program$" | awk '{print $1}')
wmctrl -v -i -r $window -e '0,0,0,6030,5828'
wmctrl -i -a $window
import -window $window ~/Desktop/screenshot.png
This uses wmctrl to get the window id ($window) for a window named "Program". It then tries to resize the window to the desired dimensions. It uses imagemagick (import) to save a screenshot.png on the user's Desktop. All of this works except the resize step. I can resize the window using wmctrl -r -e, but sizes greater than the screen size don't work. I'm using Ubuntu 10.04 and the Gnome Desktop. I run two monitors, but I've tried this with one of them disabled. Is there a way to resize the window larger than my screen to get a huge screenshot?
Part II: I tried using xrandr to set up screen panning, so as to have a bigger desktop than my monitor. xrandr --output LVDS --panning 2600x2500 This command makes the laptop screen pan over a 2600x2500 size desktop, even though it can only show 1440x900 at one time. To turn off the panning, I can use a similar command to set total size and with zeroes for the panning section. This gives me back my original laptop display behavior. xrandr --fb 1440x900 --output LVDS --panning 0x0 This is all done with xrandr, and does not require any Xorg.conf changes (my Ubuntu system doesn't even have an Xorg.conf).
My video card seems to only allow about 6.5 million pixels, even though the maximum dimensions are 8192x8192. That maximum seems to be the maximum for either dimension, but there is a limit to how many pixels can be drawn, which is the width multiplied by the height. Once I did the screen resize, I tried my script again and got a screenshot. The screenshot however is totally scrambled. I'm not sure if it's unable to take a screenshot of an off-screen window or if it is unable to handle the large dimensions of the window. With the panning display, the window should think it is visible, and the window manager should think it is on-screen. So there is a pixel buffer somewhere with those pixels in it, so there should be a way to get a screenshot.
View 1 Replies
View Related
Apr 28, 2011
I have a windows computer that has a virus on it. This computer isn't worth much so I don't want to get a virus program to clear it. I know the virus probably won't be able to crash the linux OS, but will it be able to transfer itself to flash drives if I am running linux?
View 10 Replies
View Related
Jan 26, 2010
How, using the command line can I detect my wireless card and make it work under SUSE Enterprise Desktop? The wireless card works in Win XP.
View 8 Replies
View Related
Jul 6, 2011
I am running this command in Ubuntu and windows but I get the full length instead of 10 mins. I want to split it in 10 minutes.ffmpeg -i 2000.flv -ss "00:00:00" -t "00:10:00" -vcodec copy -acodec libfaac 2010.flv
View 2 Replies
View Related
Jan 25, 2010
Ive set a password for root after rebooting tried to su in console and authentication error. however sudo works fine but if your like me using sudo all the time starts getting annoying and at times i find myself apt-getting alot of packages so su is best for me my other 9.10 works fine which i installed from a canoical cd i went through my normal routine of changing my default user permissions.
e.g(add default to everygroup, and set a root password) so after the first time it wouldn't work i remembered that on my other 9.10 i changed the groups that root was in so i did the same thing i did with my default user. well it still doesn't work but i read somewhere that its possible to change it in the console.
View 5 Replies
View Related
Jan 5, 2010
I have a website that I need to go to often and disable a monitor. To disable I need to login to the website-> click on monitor -> then uncheck a box.
I am told that I can do this through a scipt using the WGET command. I got the parameterized query and then tried to execute it through a *.sh script.
The script generates a php file in the location from where it is executed. When I go to the site and check the monitor is not disabled.
View 2 Replies
View Related
Dec 14, 2009
I would like to know the working of init command.please tell discribe the init script stored in vim /etc/rc.d/init.d/functions. what happen when init changes its run level.
View 2 Replies
View Related
