Consider that I am building my application in Linux shell using make command but somehow the build fails. Is there any way I can find out that the build has failed (of course looking at shell for error messages will do the job for me but I don't want that). Is there any flag make or shell will set/reset if such failure occurs ?
View 5 RepliesI have a problem to make a shell, using mail command DestMail= cat /opt/scripts/maillist.txt mail -s"SUBJECT" $DestMail -- -r xxxxx@gmail.com < /opt/scripts/test.txt where: maillist.txt contain email adresse separated by comma test.txt mail text this script can eval DestMail variable!!
View 1 Replies View Relatedi have made a small program to find the md5 checksum of a string.i am using xshell to compile the program.
Code:
#include <string.h>
#include <stdio.h>
#include <sys/types.h>
#include <md5.h>
[Code]...
I'm building the code on remote linux machines, and it takes very long time. Since all the filesystem is on NFS, I suspect the NFS is the bottleneck. Can I profile the build process (make all) down to system read/write calls? Or simply put, what tool do I need to find the bottleneck. Is strace gonna help?
View 1 Replies View RelatedWhen I try to launch application which runs in another window (not inside shell), it always fails with this kind of message: (example from gnome-terminal)
Code:
** (gnome-terminal:2477): WARNING **: Failed to connect to the session manager: None of the authentication protocols specified are supported Failed to get the session bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
Falling back to non-factory mode. Failed to summon the GConf demon; exiting. Failed to contact configuration server; the most common cause is a missing or misconfigured D-Bus session bus daemon. See [URL] for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.) I am running it as root, have GNOME installed and running, and also fresh install of gconf.
I am running an application called QuantiSNP [URL]. The binary file is "quantisnp2", called upon in the "run_quantisnp2.sh" supplied by the authors. I am only able to run the application for single file processing (e.g. 1 input file for 1 sample; I can't run the batch file processing because I don't have the necessary BeadStudio report files, which has different formatting for the input files).
The difficulty is that I have 300 samples (300 unique sample IDs) and 3 input files for each sample for a total of 900 runs of this application. I am wondering how would I be able to automate this process as a shell script instead of basically manually changing the sample ID and respective input files every time a run completes? I bolded the single file processing shell script command line options below that need to be changed for each sample/input single file processing run. The command line option "--sampleid" is for the name given to the processed output files corresponding to the sample of interest and there are 3 input files for each sample.
/home2/jason/QuantiSNP/quantisnp/linux64/run_quantisnp2.sh /home2/jason/QuantiSNP/MCR/v79/ --config /home2/jason/QuantiSNP/quantisnp/config/params.dat --levels /home2/jason/QuantiSNP/quantisnp/config/levels-affy.dat --outdir /home2/jason/QuantiSNP/quantisnp_out/ --sampleid sample1 --gender female --input-files /home2/jason/files/sample1_input.txt
Note that each sample has 3 input files, for a total of 3 runs of "quantisnp2" for each sample. e.g.
SAMPLEID INFILE
sample1 /home2/jason/files/sample1_input.txt
sample1 /home2/jason/files/sample1_input2.txt
sample1 /home2/jason/files/sample1_input3.txt
[code]....
I'm looking to make a launching script which launches a program in one of the current directories that the user has open, the problem is I have no idea how to get info about all of the terminals open.I simply want to check which directories the user has open and do a pwd on the terminals, and then use that to cd into the dir before launching. I might be able to use a combo of who,tty, top, and pwd...but I don't know where to go.
View 7 Replies View Relatedsimple shell script that creates a PC speaker beep when a certain background process or script stops, and possibly reports the run time of that process.
View 6 Replies View RelatedWe have zabbix Network monitoring tool installed on two servers 172.17.11.6 ( Master ) and 172.17.11.3 ( Slave ) RHEL 5.4 Servers with 172.17.11.4 being Virtual Ipaddress.We are trying to implement High Availability with Red Hat Cluster Suite.OS level Clustering has been implemented with following cluster configuraiton.
But we need to implement Application level clustering for Zabbix_server process which inturn depends on httpd and mysqld deamons to be running.So I have to check the health of mysqld and httpd with a shell script along with the health of zabbix_server process.Any good tutorials for this ? Any guidlines that I have to follow ?Here I may need to take care of following things when any one of the process goes down
1. Shifhting Virtual IP
2. Shifting /dev/sdb1 ( Shared drive to slave )
3. stopping other services on master
4. starting all the services on slave
when i ran jhbuild build as a normal user, i found below messages before it failed
Code:
Please add the files codeset.m4 gettext.m4 glibc21.m4 iconv.m4 isc-posix.m4 lcmessage.m4
progtest.m4 from the /aclocal directory to your autoconf macro directory
or directly to your aclocal.m4 file.
You will also need config.guess and config.sub, which you can get from
ftp://ftp.gnu.org/pub/gnu/config/.
[Code]...
How do I make an application launcher in the panel launch more than one application? Is there some sort of a symbol I type between the apps in the command line? Like ;
View 1 Replies View RelatedI want to make specific keymaps for application, that working only in it and doesn't affect other apps.
For example, I already use my Caps key to toggle input language (via xorg.conf), but I want Capslock to behave like Esc in vim.
Looks like xmodmap doesn't have any options related to that.
I am using Red Hat Linux Enterprise version 5. I've noticed people sometimes running commands with a couple of & options. For example, in the below command, there are two & signs. What is the purpose of them? Are they always used together with nohup?
nohup foo.sh <script parameters> >& <log_file_name> &
I am setting up a cron job, where i am calling a shell script to make few builds. I got struck at a point, need some expert inputs to proceed further. The script is categorized in 5 parts and in the last part while building software it asks for few questions like:-
1. Build mode choice
2. normal build
3. Copy Images
4. Arch
User manually has to input ans for these questions:-
1
yes
n
64
The ans's are fixed and this won't change. How shall i hard-code them or do something in the script so as when script flow reaches to this point it automatically take's these value. So far the cron job is not getting completed as it's waiting for user to key in these values manually. I had faced similar issue while building kernel modules but there it was easier as i had to take default values always:-
Trying to write a shell script called make to read a file called dirs with the following in it
programs
scripts
documents
Read file line by line and make the directories in the current directory when you type ./make dirs if no file is given then program should print usage:
make dirs filename
I know this is possible in GUI gnome. But is it possible to do it too in shell command? Let say if i type this in shell:
#file.txt
then it will open gnome-editor in nautilus which open file.txt. gnome is the desktop manager. nautilus is the explorer windows in gnome. gnome-editor is one like notepad in MS windows.
I am trying to make a slackbuild for the bigforth package (source:[URL]However when I run make I get the following error messages:
Code:
bash-4.1# make
env LIBDIR=/usr/local/lib/bigforth SRC=/usr/local/lib/bigforth/src ./forthker -e " include startup.fb ' .blk
[code]....
I have tried building a couple of packages like gst-plugins-bad, Qtcurve-Gtk2, but I get make error at this line:
Code:
For gparted I'm getting:
Code:
Using Slackware64 - current
I have a laptop running Ubuntu 10.04 and i want to make a shell script and I want a beep sound but I can't get one..
I tried this and i didn't hear any beep
I'm looking for a specific command,if it exist... i want to login from my server to another Linux server,but the question is: can i do it in a one line command for ex:
usually you type: ssh "user"@10.1.1.1 and then the password,but I'm looking for a command in one line a fake ex: ssh user@10.1.1.1 -p "password" something like that.
I don't know if anyone of you understand what do i want to say .
I want to gave much details as possible. working directory (~/a1/shell) in the shell directory i have Makefile. also in the shell directory i have subdirectory's (obj, src, include)
My current Makefile
Quote:
#What needs to be built to make all files and dependencies
clean:
# End of Makefile
I wanted it so: all .o files are created in the obj subdirectory, and my application, sshell, is created in the shell directory.
I am getting this error when i run the make run: No rule to make target 'shell.h', needed by 'shutil.o'. stop
I am using Ubuntu 11.04 (in the classic mode)Whenever I double-click my sqldeveloper.sh file, it gives weird errors. When I did :Code:sh /home/uer/Softwares/sqldeveloper/sqldeveloper.sh on the terminal, the program started up. So, I went to the "open with" on the shell file, "Select custom command" and typed the above, but nothing happened. What should I type as the custom command ?
View 2 Replies View RelatedI am trying to recompile a large open source project with the Nvidia Cuda Compiler: 'nvcc' [URL].. nvcc supports all the compile flags that gcc does but not all of the linking options. This shouldn't be a problem however as nvcc generates object files that are compatible with gcc and I should hence be able to compile with nvcc and then link with gcc (linking against the CUDA library).
To compile with nvcc I use:
./configure CC=nvcc
Which successfully creates make files that se nvcc to compile. But the Configuration script does not seem to honor LD=gcc in the same way, ie: ./configure CC=nvcc LD=gcc still tries to link everything with nvcc which promptly fails because nvcc does not support the option '-soname' without which the project will not link correctly. What am I doing wrong? How can tell the config script to link with gcc?
I've spent all day trying to sort this out and I'm beginning to think this problem is specific to a Mac because I've managed to build this extension just fine on a debian vpsI'm trying to build the PECL extension amfext.I download the source to a folder and run the following:
Code:
sudo phpize --clean
sudo phpize
[code]...
i've been searching all over the internet for a way to let the user press a particular key let's say 'y' without the user having to press [Enter] as confirmationfor yes, this would then run another function.
Quote:
Book Inventory Summary Report:-
Title, Author, Price
______________________________
StarWars EP1, G.Lucas, $49.59
Harry Potter, Rowling, $45.98
The Matrix, Mr. Smith, $53.98
Press 'y' to make a copy of this result into a file or 'n' to return to the main menu.. I understand the "press any key to continue" would go something like
Code:
read -sn 1 -p "Press any key to continue.." But i try many different ways of getting the "press a particular key" function, and none of them works.
I'm writing a shell script to check the I/O activity of a Linux box and if the server is quiet for a certain long time, the script should let the server go to sleep. But, after some Google searching, I didn't find a answer yet. Is there a shell script command to put a Linux box to sleep?
View 3 Replies View RelatedI tried to execute a shell command by M-! cmd RET but it did not work.M-! does not turn up in the microbuffer no matter how many times I press Alt+!.But if I go to Tools menu and select Shell Command... option then it writes M-! to the microbuffer and everything works fine.What is the problem here?
View 2 Replies View Relatedi have a text file generated automatically from a script , but the result in the script is not ordered in a readable way, so i need your help to fix it using a shell command the text file contain data in this way :
Code:
0.147361 0.243688 0.081520 -0.446603 1.130529 NC_000846 Chordata
Rheiformes
Aves
0.091740 0.379224 0.021160 -0.088493 3.441356 NC_000857 Arthropoda
Diptera
[code]....
i want to arrange the data in this text file in a way that each line will concatenate the 2 lines after it , so that will be 1 line , i want all the lines to be treated in this way ,
Reading a BASH script, I saw a find command preceded with a backslash. It was similar to this:
Code:
`find . -type f -name '*.xml' -print > xmlfilelist`
It's impossible to find documentation about this in man pages or on the internet, since 'backslash' are always evoked along with special characters. I also noticed that even though the command was surrounded with backquotes, the result was not affected to any variable. Maybe the backslash's presence is related with this?
I would like to create the shell which would support the LS command in C++. And any way to change the command prompt.
View 1 Replies View Related