General :: How To Rip Audio-CD To Mp3 In Console
Aug 4, 2010I' looking for tool that convert Audio-CD to mp3 in Linux console - ONE good tool.Using cdparanoia + lame is ok, but... is something else ?
View 3 Replies
ADVERTISEMENT
OpenSUSE Multimedia :: Audio Stops Playing When Switching To Console From Xorg
Aug 31, 2011My Audio stops playing when switching to console from Xorg. When I switch back it continues playing. Is it supposed to be like this? Any way I can make it play continuously? I've already checked the Howtos and this forum for this problem but havent found anything similar.
View 9 Replies View RelatedGeneral :: Unable To Listen To Any Audio File Due To Lack Of Corresponding Audio Driver Programs
May 10, 2011I have been using windows operating system for a long time now, but I am not well familiar with linux. Whenever I used to install Windows, I used to install the corresponding audio drivers(in order to listen to the music). The problem I am facing is that I do not know how to install the audio drivers(if they really exist in linux Mint 10 operating system). As a result I am not able to listen to any audio file due to lack of corresponding audio driver programs. make proper configurations settings so that I can listen to audio files in Linux Mint version 10.
View 4 Replies View RelatedGeneral :: Windows - Send The Same Audio Output To Two Audio Devices?
Aug 23, 2010Say I have 2 speakers connected to 2 different sound cards. Under Windows, is it possible to have some sort of virtual device that would forward an audio stream to both sound cards? If this can't be easily done under Windows, a solution for Linux is also fine. lternatively, if the 2 speakers are connected to different channels of a sound card, is there any vendor-independent way to duplicate audio to both channels?
View 1 Replies View RelatedGeneral :: Audio Card - Unable To Get Streaming Audio
Oct 29, 2010i have opensuse 11.3 (64-bit) installed. kde version. my sound card is a creative labs sound blaster x-fi xtreme audio, pcie interface. i am able to listen to cd music without any problems but i am unable to get streaming audio when i visit any internet radio site, videos, yahoo!tv, etc. etc. for instance, when i visit videos, the video part is ok but i cannot hear anything through the speakers. something similar happens when for instance i go to [url] and select any of the music channels. a new window pops up but the music never even starts to stream.
i know for a fact that both sound card and speakers work fine because i've tested them with windows xp. so there must be some setting in opensuse that i've missed. the weird part is that i can listen to music cds without any problems...
Software :: Start A Program From Tty1 Console To Be Executed In Tty2 Console?
Sep 8, 2010How can I start a program from tty1 console text mode to be executed in tty2 console text mode? Actualy I would like to start a program (chat client cli program) in tty8 automaticaly when linux PC boots.
View 6 Replies View RelatedGeneral :: How To Print From Console With LPR
Dec 30, 2010export PRINTER="DESKJET-710C"
cd ; lpr PDF/myfile.pdf
gives no printing at all.
However, I do it with evince using this printer, well configured, and EVINCE (x11) prints the pages.
General :: Screwed Up Gdm AND Kdm - Can't Even Get Into A Console?
Mar 19, 2010Running Ubuntu 9.10. I was messing around with gdm/kdm and now BOTH of them are screwed up. It boots into "rescue" mode but none of the options work...not even droping into a console (the screen just goes black) I've also tried pressing CTL+ALT+F[1-9] ...still can't get a console. I AM, however, able to boot from the live CD and mount /dev/sda1 and...
Code:
root@livecd# chroot /mnt
Unfortunately...
Code:
root@chroot# dpkg-reconfigure gdm
Doesn't work...SO I tried using apt-get to reinstall gdm...the only problem is when I try getting the network up in the chroot enviroment I get an error saying.
[Code]...
General :: Exporting GUI Console ?
May 9, 2011Is it possible to export the console display to my desktop?
I'm running Exceed 14.x the console is RHEL 5.6 running gnome.
I know how to export my display in an individual putty session and run whatever x app I need, but would like to be able to export the console session to my desktop also.
General :: No GUI Display On Console
Feb 8, 2010A novice and tried to set up remote desktop from XP workstation using VNC4Server. Have lost GUI interface on server console. I tried to reverse what I did but still no display.the server boots fine then displays a window "Choose a host to connect to..." which just lists a mail server on the network.Don't know where to start looking to solve this. Any help would be appreciated.
View 2 Replies View RelatedGeneral :: Test Something With JMX Console?
May 30, 2011I want to test something with my JMX console. I need to use the twiddle.sh script (because of a plugin).But when i execute this:
Code:
/opt/jboss-5.1.0.GA/bin/twiddle.sh -s localhost get jboss.system:type=ServerInfo ActiveThreadCount
i get this error:
Code:
Exception in thread "main" java.lang.NoClassDefFoundError: while resolving class: org.jboss.console.twiddle.Twiddle
[Code]...
General :: How To Change Console Keymap
May 29, 2011I want to exchange Esc and CapsLock in console (not in X environment), how can I do it? (My OS is Ubuntu)
View 2 Replies View RelatedGeneral :: Use Different Profiles For Different Console Environment?
Jul 9, 2011Can I use two or more different profiles used in my console as the same time? Since, I always ssh to the other machines ,e.g. servers. in my console. Somehow, I always mix it up with my current PC.
I want to use 2 different profiles for different environments. Say, in server console, I use red background color. in my pc console, I use green background color such that i can easily distinguish out.or can i set the background color in .bashrc?
General :: Checking The Battery From Console?
May 10, 2009I am using Red hat on my laptop and normally playing in the console. As I only plug in the battery supply when the battery is down and going form console to GUI just to check the battery status is quite cumbersome , So was wondering if the status can be checked form the console itself.
View 5 Replies View RelatedGeneral :: Cannot Switch Ttys In Console
Jul 7, 2010[Arch Linux] This has been mildly annoying ever since I installed Arch. From X, I can switch to any of my ttys, using Ctrl+Alt+FN. But when I'm in a console, that key combination does nothing, and I have to restart X11 to get back.
View 13 Replies View RelatedGeneral :: Kernel 2.6.34 - No Graphical Console
Aug 8, 2010I have been running kernel-2.6.33 (gentoo) with a graphical console which appears after the grub screen. My kernel parameters include `vga=0x317'. Since I upgraded my kernel I have only been able to get a 80x25 text console. If I use `vga=0x317' I get a black screen after the grub prompt. I have tried using `vga=ask' and choosing a number of resolutions - with no luck.
I've tried a "vanilla" 2.6.34 config and also a bootable Sabayon Linux disk with 2.6.34 - with the same result. Interestingly Sabayon Linux eventually fired up X successfully - after a black screen while it was booting.
Its looking like 2.6.34 doesn't like my hardware.
Here is some info about my hardware:
# lspci
Here is my kernel config (relevant bits):
General :: Want Non-GUI Login Screen On Console ?
Oct 20, 2009Just loaded Lenny, mostly with defaults. I'd like to go back to a command-line login for the console attached to the machine. Of course, I'd like to be able to 'startx' whenever I do want the GUI up.
View 3 Replies View RelatedGeneral :: Altgr Does Not Work In The Console
Aug 24, 2010there is absolutely no X on that machine. The keymap is just fine, what is not working is solely the AltGr Key. Do you know how to map it right? I was about trying with showkeys -s and the using it as input for setkeycodes, but I get more than one hex number, and I guess setkeycodes doesnt like that. An "" does not help..
View 3 Replies View RelatedGeneral :: Cannot Approach The Cakephp Console
Aug 13, 2010I have made a cronjob, but it wont run, after some research i find out that my red hat does not see the cake console file.
When i type the command in the terminal i get the following: root@mydomain:/var/www/domains/mydomain/cake/console# cake -bash: cake: command not found
I searched here and on google what the problem could be and it seems that the $PATH is not set like it should, but i dont know how to fix it.
When i am in the console directory and echo $PATH, i get following: /usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
General :: Internet On RHEL5 Console?
Feb 8, 2011i am using RHEL5,so i like to use console/terminal that's why i want to browse internet on terminal window of RHEL5 pls suggest me the right answe.....
View 4 Replies View RelatedGeneral :: Redirect All Outputs From /dev/console To /dev/pts/0?
Aug 9, 2010The serial console is for debugging and will physically disappear when product is mature. However, there are many background processes that may print out statuses/results. These go to /dev/console or serial console. Telnet will be the only way to get a console. I tried netconsole (with netcat) and it works, but it is only for kernel printk messages. I tried "program > /dev/pts/0" and it works also. it would be better if I can just change/add the console /dev/pts/0 to the existing /dev/console.
View 3 Replies View RelatedGeneral :: Non Interruptive Console Key Mappings
Aug 26, 2010I would like to know if it is possible to have a key mapping (using loadkeys) that will directly execute a command. I want to have a key to change volume with amixer that works when top, vi, etc.. is open.
View 2 Replies View RelatedGeneral :: Ubuntu 10.10 Booting Into Console
Mar 9, 2011Firstly I'm a complete newbie to Linux so be gentle ! Lots of unfamilar terms being used in these forums - reminds me of my windows experience 20 years ago !!
A friend gave me a copy of Ubuntu 10.10 so I've tried loading it onto an old Compaq Nx9005 Laptop yesterday. The installation seemed to progress OK, I completed all the information prompted for and then tried a reboot- but here's the problem:
It boots into the console but before the login request there are 2 lines:-
19.840039 AC'97 1access is not valid [0xffffffff], removing mixer.
19.840228 ali mixer 1 creating error.
Anyway after trying to login with user name and password it just awaits me to input a command.
Now reading through other posts I tried a Sudo startX command, this produced a large number of additional lines:
Picking out what I think might be helpful in resolving the problem:
X.Org X Server 1.9.0
Build Operating system : Linux 2.6.24-27-server i686 Ubuntu
(EE) Vesa: Kernal modesetting driver in use, refusing to load
(EE) No devices detected
Fatal server error:
No screens found
On the face of it it looks like it could possible be something to do with video drivers and/or sound drivers but just my own very limited assessment. I'm hoping that someone on this forum can come up with a reason and more importantly a solution.!
On another similar problem thread someone suggested that they might be at Run level 2 or 3 instead of run level 5 (Whatever that means!!!!).. well after entering the command run -r it tells me that I'm at level 2 but I can't change that to run level 5 by entering sudo telinit 5 - it just resorts to a command prompt
General :: Not Able To Log Into Text Console / Resolve This?
Jan 7, 2010I have just come over from the darkside (Microsoft) and am finding problems with a few items.
I am trying to configure the monitor/video card as I am having problems with the nvidia geforce 4 integrated video card. Some instructions I have sat to press ctrl alt and f1 to go to the text console. I do but it asks for a login and does not accept my user name and password.
What have I done wrong?
General :: Proper Procedure To Log Into Console?
Jul 25, 2011Decided to try to use my console but it didn't work the way I thought it would. What is the proper procedure to log into my console? I've tried to enter data given to me at http://www.zaphu.com/2008/05/30/ubun...-m4a-playback/ It entered the first line of text but not the unwrapped second line. Another line appeared asking my 'neil' login. Tried to enter my password but typed letters wouldn't enter. What do I do?
View 14 Replies View RelatedGeneral :: Package For Mouse Support On Console?
Jan 28, 2010Which package I need to install to use mouse in the standard (non X-windows) terminal?
View 1 Replies View RelatedGeneral :: Change Console's Default Monitor?
Mar 20, 2010Is there any way to specify which monitor the console is displayed on in Linux?
Details: I have a 3 monitor setup with 2 video cards. When I boot the computer, the BIOS displays on the PCI graphics card (which has a small monitor). When starting Linux, the console is displayed on the same monitor. Is there a way to have the console output on a different monitor? I'm using the vesafb framebuffer.
I don't see a way in my BIOS to change the default video card.
General :: Show Command As It's Being Entered In Console Vim?
Jul 20, 2010I'm in normal mode then I press "ayiw to yank a word into register a, gvim shows the "ayi as I type it near the bottom right corner. Is it possible to get this real-time display in console vim, if so how?
View 1 Replies View RelatedGeneral :: Hide Or Minimize X11 Window From Console?
Sep 9, 2010Window is full-screen and grabs everything.New windows are appearing behind it.I cannot just kill that application.I'm logged in as root remotely through the SSH.Expecting something like that:
$ xcontrol
> ls
window id: PID: Window class: Window name: ...
[code]....
General :: Console Hex Editor Under Windows/cygwin?
Oct 18, 2010ould recommend for a console hex editor under windows/cygwin/linux?
