General :: Cannot Approach The Cakephp Console
Aug 13, 2010
I have made a cronjob, but it wont run, after some research i find out that my red hat does not see the cake console file.
When i type the command in the terminal i get the following: root@mydomain:/var/www/domains/mydomain/cake/console# cake -bash: cake: command not found
I searched here and on google what the problem could be and it seems that the $PATH is not set like it should, but i dont know how to fix it.
When i am in the console directory and echo $PATH, i get following: /usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
View 8 Replies
ADVERTISEMENT
Feb 12, 2011
i have been assigned a task to form a system like gmail over the local area network of my institution.i am not able to find the correct approach.
View 2 Replies
View Related
Jun 6, 2011
i would want someone who would like to assist me as i start to use linux because i am naive to this platform. Also want a step to step approach to this platform called linux i mean a self explanatory article or tutorial
View 8 Replies
View Related
Jun 12, 2010
What is the 'proper' approach to have a group of 'utility' functions in an OOP language. Think of functions that trim text or convert to uppercase, create a time-stamp.These functions can be used in multiple classes.In C, I would make a file (e.g. utils.c) and dump all helper functions in there. An include file utils.h will contain the prototypes and will be included when necessary.I'm really brand spanking new to OOP (java in this case). The below timestamp function is currently a (kind of?) method of a class.Making it public and moving it to the main class results in compile errors (that the function can not be found in the class where it is used).
View 10 Replies
View Related
Dec 3, 2010
I plan to do a fresh install of Ubuntu 10.10, and I would like to dual-boot it with Fedora 14.
My last experience with Fedora's installation program was not good. It erased my Windows 7 partition without me telling it to. :/
I'm thinking of installing Fedora first and letting it take over the hard drive, then using Ubuntu's good installation program to try and dual-boot...
View 2 Replies
View Related
Jul 22, 2010
Just set up a 10.04 server today, running with dancer-ircd and dancer-services packages to create a private IRC server. However, there's a requirement to log chats against users/host/IP address for future reference. I was wondering if there was a built in server side approach (rather than separate bots per channel) to log chats in such a way?
View 1 Replies
View Related
Jan 24, 2011
I've been dealing with "blurred" menus on my openoffice and I'm not quite sure how to approach it. I've done some google searching but perhaps I'm using the wrong terms because nothing helpful is coming up.
View 3 Replies
View Related
Jan 22, 2011
is fully two times that I install ubuntu 9.10 and in no way is to approach the moon either with wifi internet nor cable
View 1 Replies
View Related
Sep 8, 2010
How can I start a program from tty1 console text mode to be executed in tty2 console text mode? Actualy I would like to start a program (chat client cli program) in tty8 automaticaly when linux PC boots.
View 6 Replies
View Related
Aug 4, 2010
I' looking for tool that convert Audio-CD to mp3 in Linux console - ONE good tool.Using cdparanoia + lame is ok, but... is something else ?
View 3 Replies
View Related
Dec 30, 2010
export PRINTER="DESKJET-710C"
cd ; lpr PDF/myfile.pdf
gives no printing at all.
However, I do it with evince using this printer, well configured, and EVINCE (x11) prints the pages.
View 3 Replies
View Related
Mar 19, 2010
Running Ubuntu 9.10. I was messing around with gdm/kdm and now BOTH of them are screwed up. It boots into "rescue" mode but none of the options work...not even droping into a console (the screen just goes black) I've also tried pressing CTL+ALT+F[1-9] ...still can't get a console. I AM, however, able to boot from the live CD and mount /dev/sda1 and...
Code:
root@livecd# chroot /mnt
Unfortunately...
Code:
root@chroot# dpkg-reconfigure gdm
Doesn't work...SO I tried using apt-get to reinstall gdm...the only problem is when I try getting the network up in the chroot enviroment I get an error saying.
[Code]...
View 5 Replies
View Related
May 9, 2011
Is it possible to export the console display to my desktop?
I'm running Exceed 14.x the console is RHEL 5.6 running gnome.
I know how to export my display in an individual putty session and run whatever x app I need, but would like to be able to export the console session to my desktop also.
View 1 Replies
View Related
Feb 8, 2010
A novice and tried to set up remote desktop from XP workstation using VNC4Server. Have lost GUI interface on server console. I tried to reverse what I did but still no display.the server boots fine then displays a window "Choose a host to connect to..." which just lists a mail server on the network.Don't know where to start looking to solve this. Any help would be appreciated.
View 2 Replies
View Related
May 30, 2011
I want to test something with my JMX console. I need to use the twiddle.sh script (because of a plugin).But when i execute this:
Code:
/opt/jboss-5.1.0.GA/bin/twiddle.sh -s localhost get jboss.system:type=ServerInfo ActiveThreadCount
i get this error:
Code:
Exception in thread "main" java.lang.NoClassDefFoundError: while resolving class: org.jboss.console.twiddle.Twiddle
[Code]...
View 1 Replies
View Related
May 29, 2011
I want to exchange Esc and CapsLock in console (not in X environment), how can I do it? (My OS is Ubuntu)
View 2 Replies
View Related
Jul 9, 2011
Can I use two or more different profiles used in my console as the same time? Since, I always ssh to the other machines ,e.g. servers. in my console. Somehow, I always mix it up with my current PC.
I want to use 2 different profiles for different environments. Say, in server console, I use red background color. in my pc console, I use green background color such that i can easily distinguish out.or can i set the background color in .bashrc?
View 1 Replies
View Related
May 10, 2009
I am using Red hat on my laptop and normally playing in the console. As I only plug in the battery supply when the battery is down and going form console to GUI just to check the battery status is quite cumbersome , So was wondering if the status can be checked form the console itself.
View 5 Replies
View Related
Jul 7, 2010
[Arch Linux] This has been mildly annoying ever since I installed Arch. From X, I can switch to any of my ttys, using Ctrl+Alt+FN. But when I'm in a console, that key combination does nothing, and I have to restart X11 to get back.
View 13 Replies
View Related
Aug 8, 2010
I have been running kernel-2.6.33 (gentoo) with a graphical console which appears after the grub screen. My kernel parameters include `vga=0x317'. Since I upgraded my kernel I have only been able to get a 80x25 text console. If I use `vga=0x317' I get a black screen after the grub prompt. I have tried using `vga=ask' and choosing a number of resolutions - with no luck.
I've tried a "vanilla" 2.6.34 config and also a bootable Sabayon Linux disk with 2.6.34 - with the same result. Interestingly Sabayon Linux eventually fired up X successfully - after a black screen while it was booting.
Its looking like 2.6.34 doesn't like my hardware.
Here is some info about my hardware:
# lspci
Here is my kernel config (relevant bits):
View 11 Replies
View Related
Oct 20, 2009
Just loaded Lenny, mostly with defaults. I'd like to go back to a command-line login for the console attached to the machine. Of course, I'd like to be able to 'startx' whenever I do want the GUI up.
View 3 Replies
View Related
Aug 24, 2010
there is absolutely no X on that machine. The keymap is just fine, what is not working is solely the AltGr Key. Do you know how to map it right? I was about trying with showkeys -s and the using it as input for setkeycodes, but I get more than one hex number, and I guess setkeycodes doesnt like that. An "" does not help..
View 3 Replies
View Related
Feb 8, 2011
i am using RHEL5,so i like to use console/terminal that's why i want to browse internet on terminal window of RHEL5 pls suggest me the right answe.....
View 4 Replies
View Related
Aug 9, 2010
The serial console is for debugging and will physically disappear when product is mature. However, there are many background processes that may print out statuses/results. These go to /dev/console or serial console. Telnet will be the only way to get a console. I tried netconsole (with netcat) and it works, but it is only for kernel printk messages. I tried "program > /dev/pts/0" and it works also. it would be better if I can just change/add the console /dev/pts/0 to the existing /dev/console.
View 3 Replies
View Related
Aug 26, 2010
I would like to know if it is possible to have a key mapping (using loadkeys) that will directly execute a command. I want to have a key to change volume with amixer that works when top, vi, etc.. is open.
View 2 Replies
View Related
Mar 9, 2011
Firstly I'm a complete newbie to Linux so be gentle ! Lots of unfamilar terms being used in these forums - reminds me of my windows experience 20 years ago !!
A friend gave me a copy of Ubuntu 10.10 so I've tried loading it onto an old Compaq Nx9005 Laptop yesterday. The installation seemed to progress OK, I completed all the information prompted for and then tried a reboot- but here's the problem:
It boots into the console but before the login request there are 2 lines:-
19.840039 AC'97 1access is not valid [0xffffffff], removing mixer.
19.840228 ali mixer 1 creating error.
Anyway after trying to login with user name and password it just awaits me to input a command.
Now reading through other posts I tried a Sudo startX command, this produced a large number of additional lines:
Picking out what I think might be helpful in resolving the problem:
X.Org X Server 1.9.0
Build Operating system : Linux 2.6.24-27-server i686 Ubuntu
(EE) Vesa: Kernal modesetting driver in use, refusing to load
(EE) No devices detected
Fatal server error:
No screens found
On the face of it it looks like it could possible be something to do with video drivers and/or sound drivers but just my own very limited assessment. I'm hoping that someone on this forum can come up with a reason and more importantly a solution.!
On another similar problem thread someone suggested that they might be at Run level 2 or 3 instead of run level 5 (Whatever that means!!!!).. well after entering the command run -r it tells me that I'm at level 2 but I can't change that to run level 5 by entering sudo telinit 5 - it just resorts to a command prompt
View 14 Replies
View Related
Jan 7, 2010
I have just come over from the darkside (Microsoft) and am finding problems with a few items.
I am trying to configure the monitor/video card as I am having problems with the nvidia geforce 4 integrated video card. Some instructions I have sat to press ctrl alt and f1 to go to the text console. I do but it asks for a login and does not accept my user name and password.
What have I done wrong?
View 11 Replies
View Related
Jul 25, 2011
Decided to try to use my console but it didn't work the way I thought it would. What is the proper procedure to log into my console? I've tried to enter data given to me at http://www.zaphu.com/2008/05/30/ubun...-m4a-playback/ It entered the first line of text but not the unwrapped second line. Another line appeared asking my 'neil' login. Tried to enter my password but typed letters wouldn't enter. What do I do?
View 14 Replies
View Related
Jan 28, 2010
Which package I need to install to use mouse in the standard (non X-windows) terminal?
View 1 Replies
View Related
Mar 20, 2010
Is there any way to specify which monitor the console is displayed on in Linux?
Details: I have a 3 monitor setup with 2 video cards. When I boot the computer, the BIOS displays on the PCI graphics card (which has a small monitor). When starting Linux, the console is displayed on the same monitor. Is there a way to have the console output on a different monitor? I'm using the vesafb framebuffer.
I don't see a way in my BIOS to change the default video card.
View 1 Replies
View Related
