Is it possible to get the path of a process running under Mono in Linux? For example if I launch KeePass using mono KeePass.exe, running ps just shows the command name as mono, while what I really want is KeePass.exe.
View 1 Repliesrunning Windows 7 64bit with VMware Workstation 7.01-build 227600. I have some knowledge of Linux, I have installed f12 and have updated the system as of 03/22/2010. All updates completed successfully.
1) How do I install VMTools on the f12 (after mounting the CD/DVD tool package)
2) How do I update the gcc files it says are dependencies?
Here's what I get on installation:Before you can compile modules, you need to have the following installed...
make
gcc
kernel headers of the running kernel
and then I am prompted for this input from the install script:
Searching for GCC...
The path "" is not valid path to the gcc binary.
Would you like to change it? [yes]
and this is where I get stuck. How do I get around this or satisfy the requirements for the install?
So, I have compiled a C# program on Linux using MonoDevelop. When I try to execute the resulting binary, my system tries and fails to run it as a windows executable, with wine. Wine gives me the following message:
$ ~/bin/MyMonoApp
wine: Install the Windows version of Mono to run .NET executables
~/bin/MyMonoApp: command not found
I can only convince it to run by explicitly calling mono:
$ mono ~/bin/MyMonoApp
So, how can I make this the default, so I don't have to explicitly call mono every time?
Just upgraded from UBUNTU to FEDORA 11. Installed most add on programs such as cacti & mysqld using YUM INSTALL. With help of 'scottro', I finally got cacti running, but still finding errors (most problems caused by different directory locations in this particular distro).
snmpwalk Binary Path
The path to your snmpwalk binary.
[ERROR: FILE NOT FOUND]
snmpget Binary Path
The path to your snmpget binary.
[ERROR: FILE NOT FOUND]
snmpbulkwalk Binary Path
The path to your snmpbulkwalk binary.
[ERROR: FILE NOT FOUND]
snmpgetnext Binary Path
The path to your snmpgetnext binary.
[ERROR: FILE NOT FOUND]
Does anyone know where are these directories located in Fedora (11)? Is there a way to find where a directory is located (normally i use 'whereis' )? No such problems when using UBUNTU...
I would like to know if anyone has run more than one version of mono concurrently. I want to host a Battlefield 2 server with bf2ccd that requires mono 1.1.12. CentOS 5.3 repos provide mono 1.2.4 which is neither new enough nor old enough to support bf2ccd. I have considered compiling a newer version or an older version to accommodate this but I think that the only fully supported version is the 1.1.12 and I want to have the newer mono for other projects. I have used Slackware exclusively up to now and am not familiar with CentOS yet so I would like to avoid compiling if I can. The server is an unmanaged dedicated server so I'm not certain of all of the details. AFAIK it is a standard CentOS 5.3 install.
View 4 Replies View RelatedI found the following function in /etc/profile file.
[Code]...
1. I dont undestand what "if ! echo $PATH | /bin/grep -qE "(^|:)$1($|:)"" this if statement actually comapres??
2. Also what is the difference between PATH=$PATH:$1 & PATH=$1:$PATH
I use this command:
Code:
find ./ -atime +360
to figure out the files that haven't been accessed since 360 days. The command above will return results like this:
Code:
/uploads/2010/02/some-file-name.ext
/uploads/2009/08/another-file-name.ext
... etc
I'm taking here about tins of directories, thousands of files. I'm looking to find a command that makes me able to move the results above to another path, and to create that path once it doesn't exist like below:
Code:
mv /uploads/2010/02/some-file-name.ext /old-files/uploads/2010/02/some-file-name.ext
But I want the executed command to create this path
Code:
/old-files/uploads/2010/02/
If it doesn't exist.
I have a program that takes a relative path as input appends it to a some path string to get the actual path.
Now all I can input is the relative path. So if I want to go one level above my input will be ../mypath.
If I know the depth of the path used internally, I can use .. as many times to go to the root directory and then give the absolute path. But suppose I do not know the depth of the directory, can I construct a relative path string such that it considers it as a relative path. One way could be to have enough .. in the path string so that I can force an absolute path for some maximum depth of path.
Is there some path string syntax that I am not aware of but can achieve this?
Experimenting with shell variables, accidentally deleted the path variable how could I return to the original path value. What kinds of problems will I have if I don't have a path variable.
View 3 Replies View RelatedI have a path c:windowsackup I need this string to be changed into /windows/back/up I used the command -bash-3.00$ echo windackup | sed 's/\//g' but the output is windbackup
View 7 Replies View RelatedCurrent script:-
prefix=user@my-server:
find . -depth -type d -name .git -printf '%h�' | while read -d "" path ; do (
cd "$path" || exit $?
[code]....
How shall i go about changing the absolute path to relative path, so that /home/git/mirror/android/adb/ndk.git gets converted to /mirror/android/adb/ndk.git //echo <command> "$prefix$PWD.git" ?? - anything for relative path?
Is there any Linux utility to combine two or more binary files into a single binary file ?
View 7 Replies View RelatedHow to coded version info and other information likes author and company name into the ELF binary?
I prefer the put the version info during build step.
i first noticed when i tried to get mono via sudo apt-get install mono i got the error
[Code]...
E: Package 'mono' has no installation candidate then i tried to get it through the software center and i noticed the software center wasn't opening.... so i tried searching to find if someone else had the proroblem, they did, one solution was to reinstall python but if i open syapitic software i get the error
[Code]...
My headphones broke so audio only works on the right speaker. As a temporary fix I want to force all sounds to play in mono in the right speaker. I run Ubuntu 9.10. Is there a way to complete this?
View 1 Replies View RelatedI'm running Debian Lenny, most of the time with KDE 3.5.10. I've got a great old stereo that I'd like to pump my audio through. It sounds fantastic, but it only seems to have one channel. Is there a way I could all my audio output to be mono so that I can get all of the music on one track? I guess there's probably a stereo to mono adapter that will do the trick, but if I can save the trip to Radio Shack, so much the better, right?
View 2 Replies View RelatedFor personal reasons (I'm hearing impaired) I need my linux machine to produce mono downmixed sound. Downmixed, not just single channel.
Is there any possibility to force such behavior in ALSA / PulseAudio server? Hardware mixing (short-circuiting L and R channels with some resistors) is not possible at the moment. I'm looking for a software solution to mix two channels into one.
I know that some media players have this functionality, but I'd like the whole system (ie games, flash applications, etc) to produce downmixed audio.
I just installed wine in an attempt to open .exe files. When running the code line /wine/file.exe the following message appeared: wine: Install the Windows version of Mono to run .NET executables. I tried out two things, both of which didn't work and the message still appears every time I try to use wine
1st: yum install mono-core.i686 It is the Mono CIL runtime, suitable for running .NET code. 2nd: downloading mono windows version from the original website but still couldn't install it because it is an .exe file
I have installed mono develop 2.4 from terminal successfully. But surprisingly I could not find any icon on my desktop to launch Mono Develop. How can I solve the above issue and how can I create a icon on desktop to launch Mono Develop.
View 1 Replies View Relatedone tell me the internal working of kill command. that is how it kills a process internally or from where it picks file to continue its process.
View 3 Replies View RelatedI have a high priority service that I start with sudo nice -n -10 process. This process does not need superuser rights though, except for the priority elevation. But nice requires superuser privileges to elevate priority.
View 3 Replies View Relatedsend the details raid configuration how to use in linux el5 and how to indentify the raid degrade process and how to rebuilt the process.
View 4 Replies View RelatedCode:
#include <stdio.h>
#include <unistd.h>
#include <signal.h>
[code]....
Description of what the code does or what i intended to do:
1. Created a child process from parent process using 'fork()'
2. Sent a signal 'SIGALRM' from child process to parent process using 'sigqueue' function.
(The Third parameter of 'siqueue' function contains the message (message msg) which the child process wants to send to the parent process.'msg' is a stucture instance containing a) pid of child and b) string) 5. Print the 'msg' sent by child process inside the signal handler function 'sig_action_function' of the parent process I am getting some junk value when this line is executed
Code:
printf("%d
",msg->cpid);
I expected to get the pid of child process, which the child process sent to parent process through the signal.
kernel 2.6.21.5, slackware 12.0
GNU bash 3.1.17
Code:
As you can see, /usr/local/bin is in the path. However, bash does not look for nasm in /usr/local/bin.
If I am root, things go well:
Code:
I use KeePass2 to access username/password information in a Dropbox file. This allows convenient access from multiple devices. I can't seem to copy a password to the clipboard on my Linux 2.6.27.41-170.2.117.fc10.x86_64 system, however, in order to supply the password to a prompt in an xterm(1). I've tried both Ctrl+C/Ctrl+V and highlighting and mouse button 2 clicking. The KeePass2 program on the Linux system is executed by Mono.
How can I copy the password to the xterm(1)?
[Aside: I think we need a "KeePass" tag.]
as we all know Process Scheduler does Process scheduling and its a process as well. I was just wondering that if this happens then the Process "Process Scheduler" should be a part of Process queue as well.
So if there are 5 process are there in Process queue & process scheduler is administrating them then since its also a process, once it puts a process under RUN state it should itself go inside queue because at one instant only one process can get executed on a processor. This is quite confusing for me. Please help me out. I tried to search on this but could not find any relevant topics.
How do you find the parent process of zombie processes?
When the child process is something where the parent is not entirely obvious...
Is there some way to list processes in tree format or something?
I have a process running on Linux.When i do ps -eaf | grep <myProcess>, it show muliple entries for <myProcess> with different pids for each entry.Kindly tell me what could be the reason for a process having multiple pids?
View 1 Replies View RelatedI want ro ran new commandy after sungrid finish his task.Exp:qsub -q bla command1; command2 command2 start only when job of command1 finished.
View 9 Replies View RelatedI've been running my shellscript for about half an hour now. It's taking longer than I thought to process all the data. I have the process ID of it. Is it possible to save the process and log out then log in and continue the process? I know how to pause a process using kill -pause pID and continue it using kill -cont pID. But that only work if you don't log out after pausing it.
View 5 Replies View Related