My headphones broke so audio only works on the right speaker. As a temporary fix I want to force all sounds to play in mono in the right speaker. I run Ubuntu 9.10. Is there a way to complete this?
View 1 RepliesFor personal reasons (I'm hearing impaired) I need my linux machine to produce mono downmixed sound. Downmixed, not just single channel.
Is there any possibility to force such behavior in ALSA / PulseAudio server? Hardware mixing (short-circuiting L and R channels with some resistors) is not possible at the moment. I'm looking for a software solution to mix two channels into one.
I know that some media players have this functionality, but I'd like the whole system (ie games, flash applications, etc) to produce downmixed audio.
So, I have compiled a C# program on Linux using MonoDevelop. When I try to execute the resulting binary, my system tries and fails to run it as a windows executable, with wine. Wine gives me the following message:
$ ~/bin/MyMonoApp
wine: Install the Windows version of Mono to run .NET executables
~/bin/MyMonoApp: command not found
I can only convince it to run by explicitly calling mono:
$ mono ~/bin/MyMonoApp
So, how can I make this the default, so I don't have to explicitly call mono every time?
i'm new to ubuntu, this is the second time i've installed it (i had enough of xp). with careful planning and thinking, i managed to get a few things working, like high resolution, java plugin, and flash. but there's a problem i encountered during listening to music: my headphone has only sound in the left speaker. i took a glance at system>preferences>sound, and i tried a couple options, but nothing worked.
some generic information:
- i have an integrated sound card (into an abit kd7 motherboard).
- my headphone is a thomson wpd265, which is working perfectly.
- neither videos, nor .flac audio plays in stereo.
i tried to google the problem, but this thing seems to be a bit rare. i'm sure this problem is related to software, since everything went fine under different circumstances (xp). it turns out that neither the speaker system is working - only the front left works from the five, and 5.1 output laggs.
Kinda like sleep timers, this technology has been around longer than dirt as a basic option on TVs, radios and other electronics, and yet why is it so hard to find these options in the modern OS? So far on Google I've seen this question asked repeatedly as far as 4 years ago. Haven't come across an answer...How to enable mono sound instead of stereo?
View 5 Replies View RelatedI would like sound from mono sources to play in both speakers/earphones. How do I do this? Currently, it plays in only one side (which makes for an odd listening experience).I generally use banshee to play sound.
View 2 Replies View RelatedI would like to know if anyone has run more than one version of mono concurrently. I want to host a Battlefield 2 server with bf2ccd that requires mono 1.1.12. CentOS 5.3 repos provide mono 1.2.4 which is neither new enough nor old enough to support bf2ccd. I have considered compiling a newer version or an older version to accommodate this but I think that the only fully supported version is the 1.1.12 and I want to have the newer mono for other projects. I have used Slackware exclusively up to now and am not familiar with CentOS yet so I would like to avoid compiling if I can. The server is an unmanaged dedicated server so I'm not certain of all of the details. AFAIK it is a standard CentOS 5.3 install.
View 4 Replies View RelatedDoes anyone know how I can force single channel sound output? I'm deaf in one ear and want to mix the channels (especially when I need to use headphones).v
View 3 Replies View Relatedi first noticed when i tried to get mono via sudo apt-get install mono i got the error
[Code]...
E: Package 'mono' has no installation candidate then i tried to get it through the software center and i noticed the software center wasn't opening.... so i tried searching to find if someone else had the proroblem, they did, one solution was to reinstall python but if i open syapitic software i get the error
[Code]...
I'm running Debian Lenny, most of the time with KDE 3.5.10. I've got a great old stereo that I'd like to pump my audio through. It sounds fantastic, but it only seems to have one channel. Is there a way I could all my audio output to be mono so that I can get all of the music on one track? I guess there's probably a stereo to mono adapter that will do the trick, but if I can save the trip to Radio Shack, so much the better, right?
View 2 Replies View RelatedIs it possible to get the path of a process running under Mono in Linux? For example if I launch KeePass using mono KeePass.exe, running ps just shows the command name as mono, while what I really want is KeePass.exe.
View 1 Replies View RelatedI just installed wine in an attempt to open .exe files. When running the code line /wine/file.exe the following message appeared: wine: Install the Windows version of Mono to run .NET executables. I tried out two things, both of which didn't work and the message still appears every time I try to use wine
1st: yum install mono-core.i686 It is the Mono CIL runtime, suitable for running .NET code. 2nd: downloading mono windows version from the original website but still couldn't install it because it is an .exe file
I have installed mono develop 2.4 from terminal successfully. But surprisingly I could not find any icon on my desktop to launch Mono Develop. How can I solve the above issue and how can I create a icon on desktop to launch Mono Develop.
View 1 Replies View RelatedI use KeePass2 to access username/password information in a Dropbox file. This allows convenient access from multiple devices. I can't seem to copy a password to the clipboard on my Linux 2.6.27.41-170.2.117.fc10.x86_64 system, however, in order to supply the password to a prompt in an xterm(1). I've tried both Ctrl+C/Ctrl+V and highlighting and mouse button 2 clicking. The KeePass2 program on the Linux system is executed by Mono.
How can I copy the password to the xterm(1)?
[Aside: I think we need a "KeePass" tag.]
I sshed into a Linux machine (bash shell) from a public Windows machine (in our lab) and forgot to log out. I'm now back at my seat in another room and I am too lazy to walk back and log out that session; I can ssh into the Linux machine from my current PC though. Can I force-logout the other session from a new SSH session?
When I ssh to the Linux box from my current PC and type users command, I can see that I'm still logged in there; my name is listed twice - one for the current session and another for the session from lab PC.
I don't have root privileges on the said machine, but I guess that shouldn't matter as I'm just trying to log out myself.
I'm trying to upgrade to Firefox 5 on RHEL5, and am getting the following error:
./firefox-bin: /usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.9' not found (required by /home/isdtc/tdiakiw/bin/firefox5/firefox/libxul.so)
As the computer is a work machine,I don't have access to update the libraries directly. To try and get around this I downloaded the libstdc++.so.6.0.10 library.strings libstdc++.so.6.0.10 | grep GLIBCXX shows:
GLIBCXX_3.4
GLIBCXX_3.4.1
GLIBCXX_3.4.2[code]....
Is there some way of forcing firefox to use this library instead? I have tried adding the directory containing the new library (with a so name) to LD_LIBRARY_PATH and then running, but I'm still getting the same error message
./firefox
+ moz_libdir=/usr/local/lib/firefox-5.0.1
+ found=0
I had the bad surprise that wget doesn't redownload when a file of the same name already exist.
Is there an option to force him to redownload without deleting the file first on linux ?
I created a group, and after adding the users into this group, they have a /home/worksharing that is shared
Code:
addgroup teamnight --gid 2578
So that everyone of the teamnight can read/write data of the /home/worksharing , how can this folder be forced, so that all from it e.g. subdirectories, directories, files,... will take the GID group number 2578 of teamnight?
running Linux release 2.4.19-uc0, build #511 embedded on a device. It is stripped down to a very minimal configuration and so many of the normal commands are not present.I'm trying to force a reboot from an application I've got running. I've tried the following:
system("shutdown -r");
or
sync();
[code]....
I am running a series of tests for an implementation of a remote pager that sends page faults to other computers in a network. Long story short, I was wondering if there is an easy way to force a process to use virtual memory as oppose to physical RAM so that I can better measure the performance of my implementation against how the system would perform while swapping to the hard drive.
View 4 Replies View Relatedim trying to implements mercurial repositories using ssh access.The problem is that if a login via ssh with the user "userA" all file upload vi that user are created with the owner: userA:userA and i need to use the group of the parent directory... is that posible ?For example:
repos ( root:repo)
-> project1 ( root:repoPrj1 )
-> file1 ( userA:usearA ) -> here i want userA:repoPrj1
Is there a way to instruct mencoder to stop streaming/recording after a specified period associated with a loss of signal?I use mencoder to record over-the-air television recordings. Most of the time there are no problems.Occasionally a station's transmission signal disappears, caused by quirky atmospheric conditions, usually at night.Noticing these signal outages is easy by the mencoder error message:dvb_streaming_read, attempt N. %x failed with errno %y when reading %z bytes"Lengthy outages are unbearable because mencoder silently waits forever rather than quit.
The significant problem with lengthy signal outages is mencoder continues recording for the time specified by the -endpos parameter. Thus, for example, if the recording is scheduled for 2 hours and there is a 20 minute loss of signal, the recording does not end until 2 hours and 20 minutes after starting.Generally, when the interruption is lengthy the recording is ruined and I don't care to watch. I would like to programmatically tell mencoder to stop waiting and quit.Is there a way to do this? Say, after ten minutes of no signal, just terminate do not notice any parameters that might offer that option, but I could be overlooking something obvious. I tried the -skiplimit parameter with no success.
I am playing with my LAMP server1. why can i access a php file on the server only by typing http://serverip/file with no .php extension on?2. later i tryed to play with .htaccess, but when i uploaded it to the server it just disappeared, why is that
View 4 Replies View RelatedI've hired a dedicated Ubuntu10.10 Server on a remote colocation. I needed a GUI to be able to hook into my KVM guests, so I installed xubuntu-desktop.
My dedicated server provider provides me very useful free service. I can request a CTRL+ALT+DEL to my server through their web based server control panel, and I can boot into a live image from their network. This is vital for me to be able fix back configuration problems.
However after I have installed xubuntu-desktop (XFCE I believe), the CTRL+ALT+DEL no longer reboots the machine.
I've been struggling with this simple issue for quite a few days, I simply can't get it to work.
I've tried setting it through XCFE 4 Settings Manager. It does not work. From my understanding any keyboard shortcuts defined here are specific to user, so I think they'll not work when the server is in login screen (no user logged in).
I've tried to put control-alt-delete.conf files in /etc/init and /etc/event.d/ , neither seems to trigger reboot. Documentary propose /etc/event.d has been deprecated since Ubuntu9.04, i tried it anyways.
Content of the file is
# control-alt-delete - emergency keypress handling
#
# This task is run whenever the Control-Alt-Delete key combination is
# pressed, and performs a safe reboot of the machine.
[Code].....
Is it normal for mkisofs to use only 5% cpu power? it seems to take an awful long time to create a .iso file. Is there a way to force it to use more?
View 4 Replies View RelatedI have RHEL 5.3.
I am trying to build a e1000 network card driver rpm with particular requirement to have cpio.gz inside rpm.
But after i build my rpm driver it has cpio.lzma inside. I simply build using command from the readme: rpmbuild -tb *.tar.gz.
I have googled and found that from around 5.0 RHEL includes lzma and uses it as a default setting. Is there any way to force to use cpio.gz or somehow repackage my rpm correctly?
I have searched through makefile and other files but was not able to find a clue.
I am writing a shell script that unzips a ZIP file into an existing hierarchy of files, potentially overwriting some of the files. The problem is that the unzip command asks for confirmation: replace jsp/extension/add-aspect.jsp? [y]es, [n]o, [A]ll, [N]one, [r]ename: y
This is unacceptable for a script.I need an option to force unzip to overwrite the files.I did not find in the man page nor with Google.
I have two monitors attached to my video card. Primary monitor has a resolution equal to 1280x1024 and second has 1920x1200. My gdm login screen always appears on the second monitor even if it is switched off. My question is how to force gdm to show login screen always on primary monitor with resolution 1280x1024? I use Ubuntu 10.04.Now I'm ready to modify gdm sources if there is no such option in configuration files.
View 1 Replies View RelatedI have CeontOS machines connected to LCD via KVM which causes failure to properly detect screen resolution and I'm stuck with 800x600 until I reset X server with the LCD connected directly to the PC. How can I enforce higher screen resolutions?
EDIT: I followed the advise and left only one resolution in my xorg.conf but it didn't help.
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
DefaultDepth 16
[Code]....
I have a problem with my newly installed ATI driver so my Fedora 12 boots to a frozen graphic mode display.I need to force it to boot to text mode interface to start adjusting my X configuration. What to do?This is a new Fedora 12 installation without any change to GRUB etc.
View 2 Replies View Related