Hardware :: Make External Hard Drive To Work As Internal?
Apr 30, 2011Recently i bought an external HDD, and unfortunately my internal HDD is not working.
Instead of buying new internal HDD, can i make external HDD work as internal HDD.
Recently i bought an external HDD, and unfortunately my internal HDD is not working.
Instead of buying new internal HDD, can i make external HDD work as internal HDD.
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies View RelatedWhat im trying to do is install ubuntu on to an external hard drive, partition it and make it work. ive got a problem, as i have 200GB of games and other things already on that drive, before you say "copy it to another drive and then back" i cant, i dont have any other drives apart from my internal which has only got 20 gig left
View 5 Replies View RelatedI am trying to boot from an external hard drive, and have tried to use unetbootin like I used when crating a bootable usb drive but it does not see my external and will not create bootbale iso for me to run from my external hard drive.
View 2 Replies View RelatedI initially installed OpenSuse on my Laptops internal drive (clean formatted) and everything worked fine. Later I took out laptop's hard drive and put it into a USB enclosure to use as an external drive.
View 1 Replies View RelatedSo I just reinstalled OpenSUSE 11.2 and I went from having 20-30 mbps speed to and from my 1 tb usb ntfs external hard drive to having about 1 mbps transfer speeds now. Is there any suggestions for how I can fix this? I know it can go faster, I just need to figure out how. and would setting acpi=off at boot affect this?
Opensuse 11.2
KDE 4.3
64 bit
EXT4 main disk
NTFS external
fdisk -l code...
can just buy any External Hard Drive and it will work on ubuntu 10.04? If not could you tell me the brands that do Work.
View 2 Replies View RelatedI have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.
I've installed Linux to a portable hard drive with the assumption that I would be able to transfer that hard drive to my other computers and be able to boot into Linux from them. I know for a fact that these computers are capable of running the same linux installed on the portable HDD via LiveCD or LiveUSB flash drive.
However, when I try to start my portable hard drive on any computer other than the one I installed it on, it boots to a black screen and stays that way indefinitely.
So, I would like to know how to make my portable hard drive more versatile, and to automatically adapt to different computers during boot.
would putting ubuntu on an external hard drive and booting it from refit work? and would i was starting up my imac 11,2 my ipod was bootable for some reason?
View 1 Replies View RelatedI'd like to know if there is a software or a distro which does the following: Imagine having two PCs. What the software should do is allow to turn one PC's hard disks to be accessed as external hard disks. It would be great if I could tell which USB port and which hard disk should be accessible like this. Now when everything is selected properly one could just plug in the other PC's USB cable and have access to the selected drive.
View 5 Replies View RelatedI had a dual boot (windows 7 + debian), both of them installed in my internal hard disk, with the GRUB in it. I have recently installed a second linux distro (mint), but I put it in an external hard disk. Now the GRUB allows me to boot any of the three operating systems, but I need the external disk to do it. It seems that after the mint installation the GRUB is now working from the external disk (if the external disk is not connected, the machine does not boot.) �Is there a way to change the location of the GRUB, to the internal hard disk of my laptop?
View 2 Replies View RelatedI recently scapped XP Pro on an old laptop (Toshiba Portege 7220)as it was so slow and I installed Ubuntu 9.10 - All installed ok and it worked fine for about a month. Last week I switched on, got the Ubuntu splash screen and thats where it stayed. I gave lappy to a friend of mine that knows about Pc's (hahaha). When I got it back he said he'd wiped the HDD and partially installed xp. The install apparantly hung after the reformat and copying files onto it.My problem now is I can't boot from HDD, Ubuntu Live CD or Windows CD - Laptop is set to boot from cd then hdd.When I try to boot from CD, the cd is read as I hear the drive being used also see light for cd flashing, after a while i get a blank screen with flashing cursor in top left corner and the cd stops.If I remove the HDD and put it in external usb caddy I can see the windows folders/files when plugged into my desk top.My questions are :-
1. Is there any way to make the drive reusable as a internal drive again as I know it works as an external drive.I would like to reinstall Ubuntu on it
2. Is it a fault with the laptop itself - how do I check
I have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
View 6 Replies View RelatedI have an HP Pavilion that was/still is running Vista. I recently decided to dual-boot to Ubuntu from an external hard drive. Both systems will boot up fine its just that for some reason it won't boot to the internal drive (with vista) unless the external is connected. I just put the HD in another laptop only to have the same problem.
View 7 Replies View RelatedI recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code:
sundar@sundar-sundar:~$ fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
[code]...
I've just loaded Vector Linux on my computer (it's a Pentium 4/2ghz my father-in-law gave us). It seems to be working well, however, I have a second hard drive in addition to the boot drive. This drive is from a previous computer that ran Mandriva Linux, so I would imagive VL can read it. I can't seem to locate it anywhere using the gui. However, I checked the system settings window under "storage" and the drive shows up. It doesn't show up in the "devices" area of the system tray. I don't think I can navigate to the drive using the "file system" window either..Is there something I can do to -- one, find the drive; and two, add the drive to the devices window so I can mount it when I need to (or, preferably, keep it permantly mounted -- like on a mac or windows computer)?By the way, the drive was the boot drive for the Mandriva computer, but the jumper is currently set to "slave."
View 1 Replies View RelatedI've been thinking of buying a new internal hard drive, mostly because my 40 GB drive is beginning to get a little crowded. I haven't bought a hard drive in many years, so I don't know what brands are currently reliable. Years ago, I heard that the larger drives were much less reliable, but in recent years I have heard that is no longer true, so that it is cost effective to get a larger drive.
View 14 Replies View RelatedI went through the Fedora 11 DVD setup process up to the partition screen, which does show my external SATA drive correct as; /dev/sda when connected by eSATA, but it shows the internal drive which is a standard IDE, as; /dev/sdf , when it should be as; sdb, why ? I did run that fdisk -l in a terminal from one of my other installed Linux, and it did show drives as correct, ( sda, sdb ). I think this may be a issue related to the digital media card reader built into this 2006 Gateway desktop computer being detected as drives like Windows does and assigns drive letters, or is this some bug in Fedora 11 ?
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x826d56f6
Device Boot Start End Blocks Id System
/dev/sda1 * 1 26 208813+ 83 Linux
/dev/sda2 27 1958 15518790 83 Linux
[code]....
So when I booted my system up today my second internal hard drive which is formatted to ext4 failed to auto-mount for me(I have an fstab entry for it). When I I tried to manually mount it from terminal it failed and suggested I run dmesg | tail and here is the output from said command:
Code:
dmesg | tail
[ 292.424199] sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[code]....
I've just put together a new machine and as I expected, there are some issues with hardware. I've just tried to set up the installation of ubuntu, got to the partitioning section and only my external hard drive is being picked up. The internal hard drive is a 1TB SATA drive plugged into a 6GB/s DATA port on my m/b (Gigabyte GA-P55A-UD4 running Intel i5 760 processor). I'm probably going to try the alternate CD to see if that works, but does anyone know if this is a common problem for any of my hardware? (I did a google but couldn't find anything).
View 3 Replies View RelatedSo when I booted my system up today my second internal hard drive which is formatted to ext4 failed to auto-mount for me(I have an fstab entry for it). When I I tried to manually mount it from terminal it failed and suggested I run dmesg | tail and here is the output from said command:
Code:
dmesg | tail
[ 292.424199] sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 292.424208] end_request: I/O error, dev sdb, sector 65
[ 292.424456] EXT4-fs (sdb1): unable to read superblock
[ 298.348591] DRS: unkown mode,default use 11N 1S AP
[ 298.348602] DRS: unkown mode (SupRateLen=8, ExtRateLen=4, MCSSet[0]=0x0, MCSSet[1]=0x0)
[ 301.371878] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 80
[ 306.211535] sd 2:0:0:0: [sdb] Unhandled error code
[ 306.211543] sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 306.211552] end_request: I/O error, dev sdb, sector 65
[ 306.211581] EXT4-fs (sdb1): unable to read superblock
I am running Windows XP on my PC. I installed a new SSD Drive, which is OCZ-VertexII 120GB. I would like to run Windows and Ubuntu 11.04. The Ubuntu 11.04 Live-DVD runs fine, but when I click on Install, I get to the Screen where it ask if I want to install Ubuntu Side by Side with Windows or want to replace Windows, Ubuntu does not recognize the second SSD-Drive. how to install Ubuntu onto the second SSD-Drive and install the Boot loader onto the First Hard-Drive?
View 2 Replies View RelatedI have an internal hard drive which is NTFS that I have some of my windows stuff on.Ubuntu seems to mount it only after I choose to open it from the places menu.I would love it if it mounted automatically on startup but I can't work out how to do this
View 1 Replies View RelatedI have appealed to anyone on this forum site for any help on installing Unbuntu 10.04.1 LTS on a MACBOOK PRO (Mid 2007 Model. Basically I've followed a few threads & posts on how to Quad boot a Macbook Pro & it seems pretty straight forward,however. Ubuntu is not playing ball for some reason?? The first attempt I tried I had the partitions as follows:
I am using a 500gb sata internal hard drive.
WIN 7 - 125gb
STORAGE - 15gb
WIN XP -125gb
MAC OSX - 180gb
FREE SPACE 50gb - Formatted DOS - Which would become the EXT4 & SWAP FILE partition.
After following instructions:
http://hydtechblog.com/2009/01/26/du...windows-vista/
[Code]...
when I load into Ubuntu 11.04 from my USB drive, why can't I access the files on my internal hard drive? I mount the drive but I cannot see any of the music, videos or documents contained on that drive (which is also an Ubuntu 11.04 drive). I was wondering so I could copy those files onto my external hard drive and reinstall since my Ubuntu crashed.
View 3 Replies View RelatedI have 350GB external Western Digital USB hard Drive.When I try to remove it from the system by executing Safely Remove Drive menu the fedora 15 system gets stuck.The processor starts giving a hum sound and it goes on even if it is left for half an hour in the stuck state.The Mouse is not working and everything is halted.
View 13 Replies View RelatedIm using it in an attempt to backup all of the files off of my dead Windows xp Computer. Right now I am using the 9.10 live disk of Ubuntu and cannot get the program to recognize what kind of file system my internal hard drive is using. (A western digital 320 GB hard drive with partition 1 in NTFS and part2 in FAT32) I would like to be able to back up this drive onto my 1 TB Western Digital external hard drive that is also in ntfs.
Now here comes the wierd part, it won't read or recognize my interal and external hard drives that run those file systems but it will recognize and allow me to read, edit, and access all of the ntfs hard drives on my home network. I did some lurking and tried a tutorial for creating a mount point and on how to force mount a disk, but neither of my disks would show up in Places/Computer. So then I checked the /etc/fstab file and is says,
aufs / aufs rw 0 0
tmpfs /tmp tmpfs nosuid,nodev 0 0
Which I think means that it says I have no hard drives installed or connected to the computer. Yet when I go into Disk Utility it tells me the disk is there and asks if I want to format the disk into ntfs...
I would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
i have installed fedora 14 with so many libraries ,development tools installed on my pc but i usually have to present some projects which can run on my system .........and can't be executed or compiled due to absence of libraries and tools there so, i there some way to so that i can use this current installation on my hard drive of my pc to some external media like external hard disk and plug and use that installation anywhere on any system..
View 2 Replies View Related