General :: Error Executing "/opt/IBM/RationalSDLC/clearcase/etc/clearcase" Operation (status=50)
Apr 3, 2010
I am facing the below problem while installing ClearCase 7.1 in a redhat 5.4 machine.Error during "post-install configure" phase: Error executing "/opt/IBM/RationalSDLC/clearcase/etc/clearcase" operation (status=50). See agent output log for more information: /var/ibm/InstallationManager/logs/native/20110519_0846.log
Install:
JVM terminated. Exit code=1
/net/zin21vob01/vob/vob_storage/cc71/linux/InstallerImage_linux//jre_5.0.3.sr8a_20080811b/jre/bin/java
-Xquickstart
-Xgcpolicy:gencon
[code]....
View 1 Replies
ADVERTISEMENT
Jul 7, 2011
Why I am getting the following issues by running the below command which was written in install script
[root@localhost linux]# cat INSTALL
InstallerImage_linux/install --launcher.ini InstallerImage_linux/silent-install.ini -silent -input clearcase_response_linux.xml
[root@localhost linux]# InstallerImage_linux/install --launcher.ini InstallerImage_linux/install.ini -input clearcase_response_linux.xml
(.:28158): GLib-GObject-WARNING **: invalid (NULL) pointer instance .....
View 2 Replies
View Related
May 18, 2011
I am facing the below problem while installing ClearCase 7.1 in a redhat 5.4 machine.Error during "post-install configure" phase:
Error executing "/opt/IBM/RationalSDLC/clearcase/etc/clearcase" operation (status=50).
See agent output log for more information: /var/ibm/InstallationManager/logs/native/20110519_0846.log
Install:
[code]....
View 1 Replies
View Related
Nov 18, 2010
8.0.4 is now supported by ClearCase?
View 9 Replies
View Related
Mar 28, 2011
I'm trying to write a gui front-end for fsarchiver using pygtk. It mostly works, but I'd like to update the front-end's status bar while fsarchiver is running. I've placed the code for the actual call to fsarchiver in one thread, and the code to update the status bar in another thread as shown below. Messages from show_progress() get printed in the terminal window, as expected. I've tried adding
Code:
while gtk.events_pending():
gtk.main_iteration_do(False)
but obviously, I'm not doing it correctly because the status bar text does not update. Is what I'm trying to do possible, and, if so, how should it be coded?
Here's the code snippet from my calling routine:
Code:
self.activethreads=2
thread.start_new_thread(self.do_fsarchive, (my_cmd,))
print "start 2nd thread now
"
thread.start_new_thread(self.show_progress,(10,status_text))
And here are the two functions:
code....
View 7 Replies
View Related
Jun 16, 2011
Running following script for checking root ssh login status.
Code:
Flag=`cat /etc/ssh/sshd_config | grep "^PermitRootLogin"`
if [ -z "$Flag" ]
then
[Code].....
View 1 Replies
View Related
Jul 14, 2010
I am writing a script which will fetch data from different machines and display it on single terminal. I have created a file named SERVERNAMES containing ip address of machines I need to monitor. Then for every IP I am issuing ssh command to get date on that machine. However When I am trying it on the script it is just giving me output of first server and it is ignoring rest servers mentioned in file. ssh works fine without password for all machines mentioned in SERVERNAMES.
Code:
# cat SERVERNAMES
10.180.45.231
10.180.45.235
10.180.45.238
10.180.45.211
Script
Code:
#!/bin/bash
while read line
do
#Calculate Load on remote machine.
Date=`ssh -T -q $line date`
echo "Date on $line is:$Date"
done < SERVERNAMES
Code:
output.
Date on 10.180.8.231 is:Wed Jul 14 10:48:46 IST 2010
I am not getting the output for .
Code:
10.180.45.235
10.180.45.238
10.180.45.211
Is there anything wrong in ssh?
View 5 Replies
View Related
Apr 21, 2010
I am wondering why running this file:
Code:
-rwxrwxrwx 1 root root 1247 2010-04-21 18:25 autorun.sh
by issueing this command:
Code:
./autorun.sh
results in this message:
Code:
-bash: ./autorun.sh: Permission denied
I'm logged in as root and prior to the above I did a chown root:root on the file.
View 3 Replies
View Related
Apr 18, 2011
I am trying to create a jailed shell for a user Don($UID '500') using my own method(I don't want to use any ready-made "jailkit"). The user don should get a home directory /jail/don instead of /home/don when he login via SSH (So that he will not able to see any other files/directories on the system)
This is what I have done.
Quote:
Code:
It works without any issue ....Home directory changes to /jail/don when I ssh to the system as user don. ie: #ssh don@192.168.0.66
Then I added a chroot command to this code.
Code:
Unfortunately , now I am getting an error message saying that "chroot: cannot change root directory to /jail: Operation not permitted" .. I am not sure how to rectify this error... Is my approach correct to get a jailed shell using /etc/profile file ?
View 8 Replies
View Related
Nov 29, 2010
I'm unable to change the setting of the actual printer on my system, cant even delete itthe system ask me the root password, after i enter it, i always get this message "There was an error during the CUPS operation:'client-error-not-authorized'."
View 8 Replies
View Related
May 1, 2011
i see this error in system.log
May 1 03:15:01 master cp: error processing extended attributes: Operation not permitted
May 1 03:15:02 master cp: error processing extended attributes: Operation not permitted
May 1 03:15:02 master 700.daily.server.cyrus: Error: /etc/MailServicesOther.plist postfix does not contain a dictionary with key log_rolling_days.
[Code]...
View 1 Replies
View Related
Oct 24, 2010
I have 2 hard drives on mu box 1st one is 500.0 MB ext4 Volume where I have my syste FC 13 and a 2nd one where I put my database files as follows 78.1 GB ext4 Volume usage = filesystem, format ext4
ih file browser, I can see an icon for a 80GB hard drive but whenever I double click I get the following
Quote:
Error mounting volume: An error occured while performing an operation on data Partition 1 of ATA Maxtor <: <the operation failed
clicking details
Quote:
Error mounting: mount exited with exit code 1: helper failed with:
mount: wrong fs type, bad option, bad superblock on /dev/sda1,
missing codepage or helper program, or other error
when I type
Quote:
dmesg | tail
I get
Quote:
# dmesg | tail
[drm] nouveau 0000:01:00.0: Allocating FIFO number 3
[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 3
[drm] nouveau 0000:01:00.0: Allocating FIFO number 4
What is very strange is that mysql works fine.In disk utility, it indicates that disk is healthy, but when I click check file system i get
File system check on "data" (Partition 1 of ATA MAXTOR STM380215A) completed File system is NOT clean
View 14 Replies
View Related
Sep 26, 2010
I have a written a test script which retrieves the status of active and inactive sessions from oracle DB, but i am receiving error while executing.My script is
Code:
filepath="/home/ocsg/scripts/db_session_report/current_session_report.txt"
INACTIVE_SESSIONS=`/home/ocsg/client10g/bin/sqlplus -s abc/abc@'(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=
[code]....
View 2 Replies
View Related
Aug 8, 2010
when i try to use apt an error occurs: dpkg: parse error, in file '/var/lib/dpkg/status' near line 27317 package 'virtualbox-3.0': error in Version string `3.0.4-50677_Debian_lenny': invalid character in revision number E: Sub-process /usr/bin/dpkg returned an error code (2)
i tried to :
1- replace the file status with status-old
2- replace it with all the backups located in /var/backups/
and the same error occurs
View 4 Replies
View Related
Dec 12, 2010
I'm running CentOS 5.3 in an openVZ container, and I'm receiving "operation not permitted" errors from Nmap.
Note: Host seems down. If it is really up, but blocking our ping probes, try -PN Nmap done: 1 IP address (0 hosts up) scanned in 3.15 seconds
I have no iptables rules set.
How can I get this working?
View 1 Replies
View Related
May 4, 2011
I'm working with Linux 2.6.23 on an embedded device and am receiving the following error executing the reboot command.
View 2 Replies
View Related
Jun 5, 2011
I installed slackware 12.1 from files i downloaded and converted to cd (images). There are six "disks" i downloaded from the slackware site and converted to images via a homemade .cmd in windows xp and then burned using imgburn.
I partitioned my hd (canibalized from an acquaintance's emachine and connected it to my desktop (1G ram, 2Ghz processor). Booted from disk 1 and fomatted the 80G HD for 2 partitions of linuxswapable at 2G apeice and 2 partitions of bootable linux. (Because i want to try another distro later). I ran the setup installing most everything and all seemed to go well. After i exited setup and restarted, it identifed the cd/hd as normal and then went into some sort of recovery mode with the emachine logo call pcangel, after which it tells me.
STOP: c0000021a (fatal system error) The session manager initialization system process terminated unexpectedly with a status of 0xc000003a (0x00000000 0x00000000). the system has been shut down. So, is this indeed an xp error message, and if so, why am i getting it after formatting everything?
View 3 Replies
View Related
Jun 1, 2011
i have an error on my ubuntu 10.10 server which kinda annoying, below is the error:
firewall kernel: [ 1814.159992] skge 0000:01:0d.0: PCI error cmd=0x157 status=0xc2b0
it keeps on coming. but ICS is ok without any problem just this error
View 2 Replies
View Related
Apr 5, 2010
i am having problem with the following code(trying to updoad a file):
Code:
HINTERNET internet;
HINTERNET ftp;
internet = InternetOpen(NULL , INTERNET_OPEN_TYPE_DIRECT , NULL , NULL , 0);
ftp = InternetConnect(internet , "127.0.0.1" , INTERNET_DEFAULT_FTP_PORT , NULL , NULL , INTERNET_SERVICE_FTP , 0 , 0);
[code]...
so FtpPutFile returns the following error:
Code:
12003
200 Type set to I.
200 PORT Command successful.
550 Operation not complete
View 2 Replies
View Related
Mar 28, 2009
while iam installing centos 5.2 i am getting following error :
LVM Operation failed vcreate failed for <fsset.partition device instance at 0xb7C1ef6c>
View 1 Replies
View Related
Jan 14, 2010
Is [URL]... down? I try to add the repository:
sudo add-apt-repository ppaorg-edgers/ppa
and I get this error:
[code]...
View 5 Replies
View Related
Apr 21, 2011
I can't get any updates for my system and keep getting the errors shown below, and suggestions peeps?
E: linux-image-2.6.28-11-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-13-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-14-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-15-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-19-generic: subprocess installed post-removal script returned error exit status 1
View 9 Replies
View Related
Mar 14, 2011
I dont know how to put this that somobody would understand my problem but here we go. I have problem like said in title.I am unable to upgrade my kernel. Sunaptics says that I have 2.6.35-28 installed. I tried to reinstall 2.6.35-28 via synaptics but it gives me error.
Thats what uname -a says:
pekka@pekka-laptop:~$ uname -a
Linux pekka-laptop 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:48 UTC 2011 i686 GNU/Linux
Tried to install 2.6.35-27 via terminal thats what I get:
Code:
pekka@pekka-laptop:~$ sudo apt-get install linux-image-2.6.35-27
[sudo] password for pekka:
Reading package lists... Done
Building dependency tree
code....
dpkg: error processing linux-image-2.6.35-25-generic (--remove):
subprocess installed post-removal script returned error exit status 1
Errors were encountered while processing:
linux-image-2.6.35-25-generic
E: Sub-process /usr/bin/dpkg returned an error code (1)
pekka@pekka-laptop:
View 9 Replies
View Related
Oct 13, 2010
I am having the following error while executing script and initialing my application
./ss.sh: line 1: kk.sh: command not found
./ss.sh: line 2: mon.exe: command not found
Can somebody assist ASAP.
View 4 Replies
View Related
Aug 5, 2010
I have a problem with acl's in Ubuntu Server 10.04. When i write in a terminal the command setfacl, the machine returns error: setfactl /home/xxxx: operation not supported.
View 1 Replies
View Related
Sep 18, 2010
I do not get what this method is seeking for? Where do i put a string or somethig that its sopposed to find.
[code]...
Seeks in the stream by the given offset, modified by type. If cancellable is not NULL, then the operation can be cancelled by triggering the cancellable object from another thread. If the operation was cancelled, the error G_IO_ERROR_CANCELLED will be returned.
[code]...
TRUE if successful. If an error has occurred, this function will return FALSE and set error appropriately if present [URL]...
View 2 Replies
View Related
Feb 11, 2010
I wrote a shell script and tried to execute it in separate terminal using command 'gnome-terminal -e <script>'. When executing first time, it went fine.From second time, I am getting error 'There is error creating child process for this terminal' repeatedly.
View 5 Replies
View Related
May 6, 2010
I get this error ALL THE TIME after a reboot if I try to print. Going to the printing applet to add the printer does no good because Lucid is not connected to the CUPS server. I found that the work-around below fixes the issue for the current session.
Code:
sudo aa-complain cupsd
sudo /etc/init.d/cups restart
[code]....
View 9 Replies
View Related
Jan 7, 2011
Have received errors the last two times I've run Update Manager. This one says: Package Operation Failed
The installation or removal of a software package failed.
Details:
installArchives() failed: Preconfiguring packages ...
Preconfiguring packages ...
(Reading database ... (Reading database ... 5% (Reading database ... 10%
[Code]...
subprocess installed post-installation script returned error exit status 1 The last error said something about "Max Reports". What I can't tell is whether the updates actually installed.
View 6 Replies
View Related
Oct 19, 2009
When I installed Fedora GNOME I could use my printer fine (But I had to change the recommended driver) Now, I switched to KDE and I plug-in my printer, It automaticly adds it, Now I have to delete it and re-add to fix the small bug... Except when I press "Remove Printer" I get "There was an error during the CUPS operation: 'client-error-forbidden'."
View 1 Replies
View Related
