Programming :: Operation Canceled - Error [G_IO_ERROR_CANCELED' Will Be Returned
Sep 18, 2010
I do not get what this method is seeking for? Where do i put a string or somethig that its sopposed to find.
[code]...
Seeks in the stream by the given offset, modified by type. If cancellable is not NULL, then the operation can be cancelled by triggering the cancellable object from another thread. If the operation was cancelled, the error G_IO_ERROR_CANCELLED will be returned.
[code]...
TRUE if successful. If an error has occurred, this function will return FALSE and set error appropriately if present [URL]...
View 2 Replies
ADVERTISEMENT
Apr 5, 2010
i am having problem with the following code(trying to updoad a file):
Code:
HINTERNET internet;
HINTERNET ftp;
internet = InternetOpen(NULL , INTERNET_OPEN_TYPE_DIRECT , NULL , NULL , 0);
ftp = InternetConnect(internet , "127.0.0.1" , INTERNET_DEFAULT_FTP_PORT , NULL , NULL , INTERNET_SERVICE_FTP , 0 , 0);
[code]...
so FtpPutFile returns the following error:
Code:
12003
200 Type set to I.
200 PORT Command successful.
550 Operation not complete
View 2 Replies
View Related
Apr 22, 2011
I installed win 7 and Linux Mint, however I've now decided to uninstall both and start with a fresh hdd. Anyway formatting went fine and started installing win 7 however there was a reading error from cd and canceled. Now ever time I try and start my pc it comes up with error: unknown filesystem and the grub rescue prompt. Now I don't know what to do as i can't seem to get around this and back to win 7 installer.
View 1 Replies
View Related
Apr 2, 2010
what "Message too long" error returned by the function dn_expand means?
The function call I used is as follows:
dn_expand(poutput, poutput + output_space_used, *out_rr, output_qname, 255);
I assumed that the error was due to the difference between the 1st argument and 2nd argument, However, changing the difference to the accepted dns message size (512 bytes) or even to no difference at all did nothing to remove the error.
Further, I am trying to check the output after having first compressed a domain name using dn_comp into *out_rr. This function call is in order to check whether the compression is happening correctly.
View 4 Replies
View Related
Aug 2, 2010
I am developing a java application that deals with the parallel port I used the parport library, I have the following problem: I am using netbeans 6.9 and linux redhat, when I run the code (java code that controls parallel port) from netbeans I get: "ioperm error: Operation not permitted" I used the "clean and build" function in Netbeans to create the jar file (test.jar) then I changed the permission of the test.jar to root using this command "chmod 4777 test.jar" and the test.jar file worked just fine as a stand alone file, but I still get the same error message when I try to run the program from Netbeans
View 1 Replies
View Related
Mar 30, 2009
im getting that error in my code for some reason. I compiled my code, and when i try to run this server it throws me an error on my call to setsocketopt(). The only way it can reach that part of my loop is if it succeeds when it calls sock() so I dont understand why the error says its an operation on a non-socket. Im just trying to set up a server to pass messages from a client to it a viceversa. Here is the code:
Code:
int main()
{
int socket_fd, new_socket_fd, k;
struct addrinfo hints, *server_info, *p;
struct sockaddr_storage peer_address;
code....
View 7 Replies
View Related
Dec 10, 2010
I logged in as user1 with administrative privileges.I right-clicked on a folder on my desktop, then "Sharing Options", then shared the folder as "docs".Then I created a new user with administrative privileges, user2, and logged in as that user.Then, I deleted user1 - account settings, and files.Then I created a folder on my desktop and tried to share it as "docs", but I get the following error: 'net usershare' returned error 255: net usershare add: failed to add share docs. Error was Operation not permitted
I can share the folder as any other name, just not "docs".My smb.conf file doesn't contain the entry.I'd love to know where the configuration file is that's hi-jacked the name "docs".
View 1 Replies
View Related
May 1, 2010
simple scan error as follows: Failed to save file ImageMagick returned error code 11 Command line: convert -adjoin /tmp/simple-scan-DA9MBV.jpg /tmp/simple-scan-XCK4BV.jpg /tmp/simple-scan-NZVYBV.pdf Stdout: Stderr: using karmic note: I have apparmor extra profiles installed but didn't notice one that related to simple scan or imagemagick. Red herring or not?
View 6 Replies
View Related
Apr 21, 2011
I can't get any updates for my system and keep getting the errors shown below, and suggestions peeps?
E: linux-image-2.6.28-11-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-13-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-14-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-15-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-19-generic: subprocess installed post-removal script returned error exit status 1
View 9 Replies
View Related
May 9, 2011
I have just upgraded my ubuntu to 11.04 .After it is done ,I could install any software ,the error is as follows:
E: Sub-process /usr/bin/dpkg returned an error code (1)
I wonder what is the meaning of the error.
View 3 Replies
View Related
Mar 14, 2011
I dont know how to put this that somobody would understand my problem but here we go. I have problem like said in title.I am unable to upgrade my kernel. Sunaptics says that I have 2.6.35-28 installed. I tried to reinstall 2.6.35-28 via synaptics but it gives me error.
Thats what uname -a says:
pekka@pekka-laptop:~$ uname -a
Linux pekka-laptop 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:48 UTC 2011 i686 GNU/Linux
Tried to install 2.6.35-27 via terminal thats what I get:
Code:
pekka@pekka-laptop:~$ sudo apt-get install linux-image-2.6.35-27
[sudo] password for pekka:
Reading package lists... Done
Building dependency tree
code....
dpkg: error processing linux-image-2.6.35-25-generic (--remove):
subprocess installed post-removal script returned error exit status 1
Errors were encountered while processing:
linux-image-2.6.35-25-generic
E: Sub-process /usr/bin/dpkg returned an error code (1)
pekka@pekka-laptop:
View 9 Replies
View Related
Dec 29, 2010
I needed to find the time it takes to execute a for loop... I decided to use the gettimeofday() function and wrote the following code:
#include <stdio.h>
#include <stdlib.h>
#include <time.h>
#include <sched.h> // for use of sched_setaffinity
[code]....
View 9 Replies
View Related
Nov 29, 2010
I'm unable to change the setting of the actual printer on my system, cant even delete itthe system ask me the root password, after i enter it, i always get this message "There was an error during the CUPS operation:'client-error-not-authorized'."
View 8 Replies
View Related
May 1, 2011
i see this error in system.log
May 1 03:15:01 master cp: error processing extended attributes: Operation not permitted
May 1 03:15:02 master cp: error processing extended attributes: Operation not permitted
May 1 03:15:02 master 700.daily.server.cyrus: Error: /etc/MailServicesOther.plist postfix does not contain a dictionary with key log_rolling_days.
[Code]...
View 1 Replies
View Related
Oct 24, 2010
I have 2 hard drives on mu box 1st one is 500.0 MB ext4 Volume where I have my syste FC 13 and a 2nd one where I put my database files as follows 78.1 GB ext4 Volume usage = filesystem, format ext4
ih file browser, I can see an icon for a 80GB hard drive but whenever I double click I get the following
Quote:
Error mounting volume: An error occured while performing an operation on data Partition 1 of ATA Maxtor <: <the operation failed
clicking details
Quote:
Error mounting: mount exited with exit code 1: helper failed with:
mount: wrong fs type, bad option, bad superblock on /dev/sda1,
missing codepage or helper program, or other error
when I type
Quote:
dmesg | tail
I get
Quote:
# dmesg | tail
[drm] nouveau 0000:01:00.0: Allocating FIFO number 3
[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 3
[drm] nouveau 0000:01:00.0: Allocating FIFO number 4
What is very strange is that mysql works fine.In disk utility, it indicates that disk is healthy, but when I click check file system i get
File system check on "data" (Partition 1 of ATA MAXTOR STM380215A) completed File system is NOT clean
View 14 Replies
View Related
Feb 23, 2010
i am trying to run an application code in nfs host.but facing the problem as shown below.can anybody tell what the problem could be?
[code]...
View 2 Replies
View Related
Oct 18, 2010
I have got a program using semctl(). I cant understand the value returned by semctl using GETPID option and its difference with the actual pid obtined by getpid()as in the following code:
Code:
int semid,retval;
semid=semget(0*20,1,0666 | IPC_CREAT);
retval = semctl(semid,0,GETPID,0);
[code]....
View 4 Replies
View Related
Jul 25, 2015
When trying to install php5 I got the following result. Tried to apt-get clean, autoclean, remove --purge then reinstall the mentioned packages without any success.
dpkg --configure -a didn't get any better result.
Code: Select allsudo apt-get install php5
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Les paquets supplémentaires suivants seront installés :
libapache2-mod-php5 php5-cli php5-common
[Code] .....
View 5 Replies
View Related
Jun 2, 2010
I recently upgraded a couple of my systems from 8.04 LTS to 10.04 LTS. I had no issues with nfs prior to the upgrade. After the upgrade I am occasionally seeing the following messages:
mspfiles being the share name.
This never used to happen on 8.04. Generally the error "Socket operation on non-socket" points to a coding error. Could this be a bug in the kernel? Has anyone else come across this?
The only other recent reference that I found to the same errors was in this comment on the OpenSUSE bugtracker: [url]
It seems as though it is handling loss of connectivity less gracefully than it did before.
I can't really upgrade any more of my servers until this is fixed as we are heavily dependant on nfs.
View 9 Replies
View Related
Jan 14, 2010
I think that my computer crashed one time, while I was in middle of installing some new software, and it seems like it have made "dpkg" confused with itself - it thinks, that I still need to install "Wine", but it is allready installed, so everything is allright. But everytime, when I am upgrading or installing any kind of software, it give me this error (just an error, everything still works and installs fine):
Code:
Setting up wine (1.0.1-0ubuntu8) ...
kernel.printk = 4 4 1 7
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
[Code]....
Errors were encountered while processing: wine E: Sub-process /usr/bin/dpkg returned an error code (1)
View 6 Replies
View Related
Mar 19, 2010
I'm tried to install bandwidthd on Ubuntu 9.10 and keep getting the following error.I have been looking around for a while and have been unsuccessful in finding a answer.
HTML Code:
$sudo apt-get install bandwidthd
Reading package lists... Done
[code]....
View 1 Replies
View Related
Aug 30, 2010
i'm runung "ubuntu 10.4" and install "Xampp 1.7.3.a" i have 3 problem in the joomla web installer in step "2:Pre-installation Check"
Code: configuration.php Writable NO
in step 5 : FTP Configuration when i feel ftp setting and click on "verify ftp setting,get this error Code: Error: the XML response that was returned from the server is invalid.
inthe final step when i click "install sample data" i get this error
Code:
Error: the XML response that was returned from the server is invalid.
View 1 Replies
View Related
Jan 30, 2010
I'm trying to customize my BackTrack4 image so I can use the live disk with my ati graphic card. While trying to put the drivers with the apt-get install ati-driver command, I get the following message:
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
ati-driver
[Code]....
View 2 Replies
View Related
Sep 12, 2010
I am using a fully updated fedora 13 64-bit system and when i run make on xoscope i get the following error:
collect2: ld returned 1 exit status
I have already installed all of the prereqs. And the configure went without errors.
View 9 Replies
View Related
Mar 13, 2010
Thought I could just place a hard drive with a preloaded Ubuntu install from another machine (a loaner machine) into this one; change a few drivers and be on my way. Too many errors to count. ALSA; Jack; LiveTex all cratered and I'm tired of fighting this. I've spent more than two days trying to get stuff working and if there's anything I've learned from years of experience there's a time to cut bait and run.
A clean install on the actual hardware I'm using has to be better than the hodge podge I have now.What I would like from the community is recommendations for what to do AFTER the install.
1) where can I find the most up-to-date comprehensive and exhaustive list of repositories for the Synaptic Package Manager?
2) I like to do sound and video processing. I would like to have the program applications
Qsynth, Virtual Midi Keyboard, Muse Score, Csound, GNU Denemo, and many others that either fail to start or produce no sound to work. What, besides the programs need to be loaded in order to make these work?
3) A helpful list of recommendations on what to install along with order preference. In other words 'this needs to be done before this...' on a new Ubuntu install.
In case anyone's interested: Here's a small list of some of the errors I currently have.
AlsaModularSynth - Could not open file.Qsynth1 - Failed to create the audio driver (jack) / Jack server not running.
Errors were encountered while processing:
texlive-latex-base-doc
E: Sub-process /usr/bin/dpkg returned an error code (1)
Qtractor - The audio/MIDI engine could not be started. Make sure the JACK audio server (jackd) and/or the ALSA Sequencer kernel module (snd-seq-midi) are up and running and then restart the session.
apt-get install alsa-utils - Errors were encountered while processing:
texlive-latex-base-doc
E: Sub-process /usr/bin/dpkg returned an error code (1)
Jack configuration files not found; the list is endless. Plus many errors trying to get texlive to work.
View 1 Replies
View Related
Sep 24, 2010
The problem emerged when I started to make the internal microphone and external speakers work [URL]. In either kernel 2.6.32-24 or 2.6.35-15 - cannot install any package with apt-get. Here is the error I get when installing just anything [URL]. Basically, here is it:
Code:
ERROR: Build failed. Please review the build log at /tmp/alsa-driver-linuxant.3620.log
dpkg: error processing alsa-driver-linuxant (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up libxslt1-dev (1.1.26-1ubuntu1) ...
Errors were encountered while processing:
alsa-driver-linuxant
E: Sub-process /usr/bin/dpkg returned an error code (1)
View 3 Replies
View Related
Dec 1, 2010
Code:
Unpacking replacement linux-image-2.6.35-23-generic ...
dpkg-deb (subprocess): data: internal bzip2 read error: 'DATA_ERROR'
dpkg-deb: subprocess <decompress> returned error exit status 2
dpkg: error processing /var/cache/apt/archives/linux-image-2.6.35-23-generic_2.6.35-23.41_i386.deb (--unpack):
[Code].....
both update software and synaptic gave the same error? how do i install this package?
View 1 Replies
View Related
Dec 19, 2010
I have a little home server running server 8.04 and decided to check for upgrades. One of the upgrades was a new kernal update. It was able to download the update, but errors on uncompressing it. I have even shutdown the server and restarted it. Still no luck.
Here is the screen log from the update process:
(Reading database ... 49993 files and directories currently installed.)
Preparing to replace linux-image-2.6.24-28-server 2.6.24-28.80 (using .../linux- image-2.6.24-28-server_2.6.24-28.81_i386.deb) ...
Done.
Unpacking replacement linux-image-2.6.24-28-server ...
[code]....
View 1 Replies
View Related
Apr 8, 2011
when i try to update using terminal and update manager i get this error
/usr/bin/dpkg: 1: Syntax error: "&" unexpected
E: Sub-process /usr/bin/dpkg returned an error code (2)
View 7 Replies
View Related
Mar 9, 2010
it's a hot day and nothing seems to be going right. Trying to figure a way out of this one - error 127. Looks like it could be Metacity problem? There a couple of pythons that also have a problem.
Code:
(Reading database ... 145089 files and directories currently installed.)
Preparing to replace metacity-common 1:2.28.0-0ubuntu1 (using .../metacity-
[code]....
View 5 Replies
View Related
