I have a written a test script which retrieves the status of active and inactive sessions from oracle DB, but i am receiving error while executing.My script is
Code:
filepath="/home/ocsg/scripts/db_session_report/current_session_report.txt"
INACTIVE_SESSIONS=`/home/ocsg/client10g/bin/sqlplus -s abc/abc@'(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=
[code]....
I'm trying to understand if anyone is left on a server. Basically I manage a simple linux server remotely used by 3-4 individuals. I can never tell if someone is actually on or not using w/who.What I'm seeing is some people having what appears to be inactive/lost VNC sessions. I don't understand idle fully, but I do believe a program (without user interaction) can clear idle back to 0, correct?Anyway, I'm asking because every now and then I need to reboot the server, and I do not want to interrupt any program working on calculations or waiting on having the data saved.
Code:
me@matrix:~> w
06:59:54 up 170 days, 9:13, 16 users, load average: 0.52, 0.16, 0.06
[code]....
I'm a new user for oracle,tried to install oracle 10g on redhat linux 5 but gettinh the same error message.response/ runInstaller[oracle2@localhost database_10201]$ sh runInstaller _runInstaller: line 54:/tmp/database_10201/install/.oui: Permission denied_Doany one plz help me how to give full set of permisions to an user in linux to access a folder??
View 2 Replies View RelatedI'm running openSUSE 11.4 x86_64. When I am using GIMP, it will regularly stop allowing me to use my mouse or Wacom Intuos 3, forcing me to use my keyboard, but only within dialogs such as for scaling a layer, saving a file, etc. It's so flaky that the mouse/tablet will work sometimes and not sometimes, back and forth, within one "session" of using GIMP. It's driving me nuts. Sometimes I struggle with the keyboard (a struggle because it's indirect and sometimes counter-intuitive), other times I'll close the dialog and re-open it to see if that time the mouse (or tablet) will work. From what I've seen, I'll either be able to use both or not able to use both, rather than only having the mouse but not the tablet or vice versa.
View 4 Replies View RelatedI'm new to Fedora 10 and still a newbie with Linux in general. I installed F10 on an old PC I had....and the install went well..however, I'm having Internet Connectivity issues.
Here is what I did so far:
Did an ifconfig command and I have the following:
pan0 Link encap: Ethernet HWaddr D2:30:36:AF:61:95
inet6 addr: fe80::d030:36ff:feaf:6195/64 Scope: Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:30 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes: 0 (0.0 b) Tx bytes: 8676 (8.4 KiB)
When I go to the Network Configuration Panel I see the following:
Status: Device: Nickname: Type:
Inactive pan0 pan0 Ethernet
Tried to activate and it states Activating network device pan0, please wait... determining IP information for pan0.... A few minutes pass by then. It indicates it failed. Cannot activate network device pan0! I have disabled the Controlled by NetworkManger and enabled the Activate device when computer starts.
I am running fedora from the USB. My computer is Dell - inspirion. I tried to configure the wireless according to the instructions. I added new a device ...
I see the new device but it's written inactive. The Active/inactive buttons are disable (or not seen at all). How can i resolve/Active the wireless?
I am new to Linux.
Currently I am installing oracle 10g release 2 with Red hat Linux 4.
I am getting the following error.
Exception Name: MakefileException
Exception String: Error in invoking target 'ntcontab.o' of makefile '/home/oracle/oracle_10.2/network/lib/ins_net_client.mk'.
In forum I saw this kind of post and I did all the steps, then also getting the error.
when i try to use apt an error occurs: dpkg: parse error, in file '/var/lib/dpkg/status' near line 27317 package 'virtualbox-3.0': error in Version string `3.0.4-50677_Debian_lenny': invalid character in revision number E: Sub-process /usr/bin/dpkg returned an error code (2)
i tried to :
1- replace the file status with status-old
2- replace it with all the backups located in /var/backups/
and the same error occurs
I installed slackware 12.1 from files i downloaded and converted to cd (images). There are six "disks" i downloaded from the slackware site and converted to images via a homemade .cmd in windows xp and then burned using imgburn.
I partitioned my hd (canibalized from an acquaintance's emachine and connected it to my desktop (1G ram, 2Ghz processor). Booted from disk 1 and fomatted the 80G HD for 2 partitions of linuxswapable at 2G apeice and 2 partitions of bootable linux. (Because i want to try another distro later). I ran the setup installing most everything and all seemed to go well. After i exited setup and restarted, it identifed the cd/hd as normal and then went into some sort of recovery mode with the emachine logo call pcangel, after which it tells me.
STOP: c0000021a (fatal system error) The session manager initialization system process terminated unexpectedly with a status of 0xc000003a (0x00000000 0x00000000). the system has been shut down. So, is this indeed an xp error message, and if so, why am i getting it after formatting everything?
Ive recently switched over to AT&T Uverse TV/Internet service and I've noticed that when I ssh into my linux( 2.6.18-194.3.1.el5xen CentOS) server I get disconnected. When I'm using putty it gives the "network error software caused connection abort" error. When I'm at work using one of our jump servers and ssh'ing from the command line it will freeze up from time to time but never disconnects. I think the problem is either with the OS or the new AT&T modem. At first I had my CentOS server using DHCP and it would disconnect within a few minutes after I ssh'ed. I switched over to a static IP and now it goes about 10 minutes before it disconnects. It doesnt matter if I'm actively typing or not, so it's not an inactivity issue. I have the firewall turned off on my laptop, and since the issue happens on multiple devices, including my iphone I dont think thats the issue.
I have iptables and selinux turned off/disabled so thats not it. In putty I have enabled Keep Alive(30 seconds) and it still disconnects. I opened the port on the modem to allow ssh for the IP of the linux server. Ive also recently reinstalled this server with CentOS so I can't compare with the previous internet provider as I didn't reinstall until after I switched over. BUT previous installs with CentOS 5.2 worked fine with the previous ISP. AT&T Modem is a 2wire 3800HGV-B
i have an error on my ubuntu 10.10 server which kinda annoying, below is the error:
firewall kernel: [ 1814.159992] skge 0000:01:0d.0: PCI error cmd=0x157 status=0xc2b0
it keeps on coming. but ICS is ok without any problem just this error
I can't get any updates for my system and keep getting the errors shown below, and suggestions peeps?
E: linux-image-2.6.28-11-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-13-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-14-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-15-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-19-generic: subprocess installed post-removal script returned error exit status 1
I've AMD64 system with Ubuntu 11.04 installed. It's been rough ride for me to install oracle-xe-universal. I've already spent more than 2 days on this. Still unsuccessful.
1) First I downloaded the packages libaio_0.3.104-1_i386.deb and oracle-xe-universal_10.2.0.1-1.1_i386.deb
2) Then I ran
sudo apt-get install bc (ran fine)
sudo dpkg -i --force-architecture libaio_0.3.104-1_i386.deb (ran fine)
sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.1_i386.deb
(gave me dependency error for libc6 (>= 2.3.2), I modified the control file to remove dependency and rebuilt the package) (now worked fine) Oracle xe is now installed. Then I tried to start the DB it started but it's HTTP client never started. So I decided to uninstall the oracle-xe=universal. None of the sudo apt-get remove oracle-xe-universal command's didn't worked for me. So i went for manual uninstallation directions as per oracle link.
I ran the following command-
--Manually uninstalling Oracle 10g--
sudo rm -rf /usr/lib/oracle /etc/oratab /etc/init.d/oracle-xe /etc/sysconfig/oracle-xe /usr/share/doc/oracle_xe /usr/share/doc/oracle_xe_client
Then I again ran the following command to install oracle-xe
sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.0_i386.deb
See below what I got as the output-
rocky@ubuntu:~/git/mygit/edas2/libaio$ sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.1_i386.deb
dpkg: warning: overriding problem because --force enabled:
package architecture (i386) does not match system (amd64)
[code]....
Even in applications menu I don't see the if oracle has been installed. So i conclude first time installation was ok but somehow http client didn't worked. After manual uninstallation, second installation didn't even loaded/installed the oracle-xe in init.d directory.
I dont know how to put this that somobody would understand my problem but here we go. I have problem like said in title.I am unable to upgrade my kernel. Sunaptics says that I have 2.6.35-28 installed. I tried to reinstall 2.6.35-28 via synaptics but it gives me error.
Thats what uname -a says:
pekka@pekka-laptop:~$ uname -a
Linux pekka-laptop 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:48 UTC 2011 i686 GNU/Linux
Tried to install 2.6.35-27 via terminal thats what I get:
Code:
pekka@pekka-laptop:~$ sudo apt-get install linux-image-2.6.35-27
[sudo] password for pekka:
Reading package lists... Done
Building dependency tree
code....
dpkg: error processing linux-image-2.6.35-25-generic (--remove):
subprocess installed post-removal script returned error exit status 1
Errors were encountered while processing:
linux-image-2.6.35-25-generic
E: Sub-process /usr/bin/dpkg returned an error code (1)
pekka@pekka-laptop:
I upgraded to fedora 12 today from fedora 11. I had oracle-xe 10g running on my system perfectly fine when I was running fedora 11. now , after the upgrade, i cannot login to sql.it gives the following error
Code:
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Dec 16 12:45:25 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
I have checked listener.ora and tnsnames.ora. they both are unchanged.
[Code]...
Yesterday I decided to install Fedora 13, having heard good reports about it. I started with linux back in the RH 5.2 days on which I cut my teeth. Since then I've used many distros and versions, openSUSE, RedHat, Ubuntu, Gentoo, Slack ... After the installation completed (without error), I rebooted at which time I got the following message at the grub screen: Quote: Error No Active Partition
[Code]....
I was notified by the updater that VirtualBox-3.2-3.2.10_66523_fedora12-1 (x86_64) was available to install. So I clicked [Install Update] and got the following Transaction error:The GPG keys listed for the "Fedora 12 - x86_64 - VirtualBox" repository are already installed but they are not correct for this package.Check that the correct key URLs are configured for this repository.
View 2 Replies View RelatedCurrently I am installing oracle 10g release 2 with Red hat Linux 4.I am getting the following error.
Exception Name: MakefileException
Exception String: Error in invoking target 'ntcontab.o' of makefile '/home/oracle/oracle_10.2/network/lib/ins_net_client.mk'. In forum I saw this kind of post and I did all the steps, then also getting the error.
i am facing problem in installing oracle 10g R2 on rhel4 x86. following error is throwing while installation:-java.io.FileNotFoundException: /tmp/OraInstall2010-02-19_10-21-06AM/oui/instImages/images.properties (No such file or directory)
[code]....
I've just installed the Oracle Instant client using this: https://help.ubuntu.com/community/PHPOracle
The phpinfo() show me that oci8 is enable, but when I try to query that database I've got the following message:
PHP Code:
Code:
How to troubleshoot.
I would like to use emerald on oracle linux 5. I prefer this forum so I migrated to here! In fact, I already managed to import some themes in emerald, and to apply them, but after a reboot there was an error message (I don't remember it but I can retry to boot if you want), and my new emerald theme was not loaded, instead I had the default one, and when I launched emerald I wasn't able to import a new theme, there was no theme in the emerald window. so I tried to import one with the file manager by clicking on the "import" button, but in my home folder (/home/olivier) I had ... nothing : no file, no directory, yet there are still on the disk, I verified.
this seems an error of rights, but I don't know what to do. I must also specify that I have not already put "fusion-icon" in the list of the applications to launch at the startup, so I have to launch it after the boot (and it's what I did after the boot I spoke about above. I don't remember if I launched fusion-icon as "root" or "olivier"...
After booting, my RAID1 device (/dev/md_d0 *) sometimes goes in some funny state and I cannot mount it.
* Originally I created /dev/md0 but it has somehow changed itself into /dev/md_d0.
# mount /opt
mount: wrong fs type, bad option, bad superblock on /dev/md_d0,
[code]...
In /proc/partitions the last entry is md_d0 at least now, after reboot, when the device happens to be active again. (I'm not sure if it would be the same when it's inactive.)
Resolution: as Jimmy Hedman suggested, I took the output of mdadm --examine --scan:
ARRAY /dev/md0 level=raid1 num-devices=2 UUID=de8fbd92[...]
and added it in /etc/mdadm/mdadm.conf, which seems to have fixed the main problem. After changing /etc/fstab to use /dev/md0 again (instead of /dev/md_d0), the RAID device also gets automatically mounted!
I just configured two raid setups but after a reboot they are not mounted and seem to be inactive.
md127 = sde1, sdf1 and sdi1 (raid 5)
md0 = sda1 and sdh1 (raid 0)
Code:
root@server /]# cat /proc/mdstat
Personalities :
md127 : inactive sdf1[1](S) sde1[2](S)
78156032 blocks
md0 : inactive sda1[0](S)
488382977 blocks super 1.2
unused devices: <none>
Code:
[root@server /]# fdisk -l | grep "Disk /"
Disk /dev/sda: 500.1 GB, 500107862016 bytes
Disk /dev/sdb: 80.0 GB, 80026361856 bytes
Disk /dev/sdc: 122.9 GB, 122942324736 bytes
Disk /dev/sdd: 160.0 GB, 160041885696 bytes
Disk /dev/sde: 40.0 GB, 40020664320 bytes
Disk /dev/sdf: 40.0 GB, 40020664320 bytes
Disk /dev/sdg: 1500.3 GB, 1500301910016 bytes
Disk /dev/sdh: 251.0 GB, 251000193024 bytes
Disk /dev/sdi: 40.0 GB, 40020664320 bytes
Disk /dev/sdj: 500.1 GB, 500107862016 bytes
Code:
[root@server /]# cat /etc/mdadm.conf
DEVICE /dev/sdi1 /dev/sdf1 /dev/sde1 /dev/sda1 /dev/sdh1
ARRAY /dev/md127 UUID=5dc0cf7a:8c715104:04894333:532a878b auto=yes
ARRAY /dev/md0 UUID=65c49170:733df717:435e470b:3334ee94 auto=yes
As you can see they now show up as inactive. And for some reason sdi1 and sdh1 are not even listed. What can I do to get them back? To make matters worse I placed some important data on them, and even if I was clever enough to keep an extra copy on another drive, guess which drive that was? So, I need to get them activated as is (at least so I can get the data of them) before I can rebuild them from scratch. I'm running Mandriva 2010.1 and rated tehm using the built in disk partitioner.
An unhandlable error occured There seems to be a programming error in aptdaemon, the software that allows you to install/remove software and to perform other package management related tasks. Please report this error at http://launchpad.net/aptdaemon/+filebug and retry.
I recently tried to install Oracle xpress edition 10g by downloading the ".deb" file of around 200 mb. When the installation was about to complete, the "Ubuntu Software Center" gave an error like shown in the picture.
We have a Wipro Net Power 8552 server on RAID 5 with Linux Advanced Server. The Databse is Oracle . Every time the reocovery is made the block corruption error gets changed. There are four hardisk in the Raid with 18 GB capacity of Quantum make. I want to make sure if any Utility is there in Linux to check the Harddisk if any Block corruption is there or Not.
View 1 Replies View RelatedI have following setup on a ubuntu machine.
- Fetchmail collects emails and notifies procmail
- Procmail forwards this mail to a perl script which extracts the attachments
- then this script executes the bugzilla importxml.pl with the attachments.
This works like a charm on the ubuntu machine. Unfortunately I now have been forced to rebuild this setup on a oracle linux. Well, I can run the imports from terminal as root user. The import works well.But if fetchmail trigges procmail and the the perl scripts become executet I get following error:
Code:
'oracle' is not a valid choice for $db_driver in localconfig: Can't load 'lib/i386-linux-thread-multi/auto/DBD/Oracle/Oracle.so' for module DBD::Oracle: libclntsh.so.10.1: cannot open shared object file: No such file or directory at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/DynaLoader.pm line 230.
at Bugzilla/DB/Oracle.pm line 41
[code]...
The path "lib/i386-linux-thread-multi/auto/DBD/Oracle/Oracle.so" is right if you go from the importxml.pl but if perl realy looks on this as absolute path to oracle.so then its clear that the file is not there... Again. The script works if I call it manually. So whats the difference between manual call and call through the process described at the beginning? Something seems to be different in the perl environment. The .procmailrc lies in /root and fetchmail is startet manually by the root user in the terminal (for testing). So I thing at the end its in both ways the same user who calls importxml.pl...
1.) Where can I find the setting to change the size and color of the font used for inactive windows?
2.) Where can I change the size of fonts used in webpages? For example, look at the size of the font I see here at this website.
As my ubuntu 9.10 boots the mouse and the key board fail and screen is inactive. Previously working OK.
View 5 Replies View RelatedI was installing SMPLAYER when the power failed...now i get this error message when trying to re-install the packages..
E: liblzo2-2: subprocess installed post-installation script returned error exit status 2
E: mplayer-nogui: dependency problems - leaving unconfigured
E: mplayer: dependency problems - leaving unconfigured
[code]....
After installing a new Rhel6.0 64bit on VMWare i got the information:
{
disabling swap...
/dev/dm-1
unmounting filesystems...
/mnt/runtime done
code....