How can I display only the folders that have changed inside of two different directories?
PHP Code...
Will this suffice?
I am trying to see what new directories were added between my working build and a new onefor a project that I working on.
Running Jessie 8.2 and Icedove 38.4.0. I just applied some updates and now Icedove only displays the number of unread messages in the folders.
Previously, it displayed the number of unread and the total number of messages in neat columns. Now it is a single number of unread in parens.
Is there any way I can get the display back to the previous format of unread# and total#?
I'm looking for a way to produce a list of all the directories in the current working directory sorted by the total number of files that are contained with them.
Initially I though that Nautilus could be used for this, but then I realised it doesn't count files in the sub directories.
The best I've got for a command line solution so far is this
Code:
The use case for this is a situation where a user has a quota applied to their home directory which limits the number of files they are allowed to have and they have exceeded that limit.
I am setting up a lubuntu nas with all of my music, movies, etc on it. I want to give my kids access to my mp3 directory, so I can move all of the kid appropiate music into the root of my mp3 dir, in the same order I have all of my music sorted. Under the Music folder, I have them sorted, in folders, by letter. So A, B, C, D, etc... Now, in those folders are the respective artists. So where there may be something approipate in the P folder (say, Paramore), there is something inapproipate (say, Pantera)Now, when the kids go to the P folder, I don't want them to even see the Pantera folder. I just want them to see the Paramore folder. I tried a test using chmod 711 and chmod 700 on a directory with a test user, and the user can't access the directory, but can still see it
View 3 Replies View RelatedI am trying to find a directory named 480debugerror nested under child directories. I don't know the exact path, or even if I have the exact spelling of the directory I ant to find.
Is there any linux command to find directories with a given prefix or suffix, for example directories with a name of debug or debugerror, with unknown some prefix or suffix?
I have a directory (let's say A) with a few hundred files and subdirectories and a copy of this directory (let's say B). All the files and subdirectories in B have a newer date than A. However only a few of them are really changed files. Is there a way to find those files and directories? Basically they have different sizes so this could be used to compare them with the files from A.
View 3 Replies View RelatedHow can i compress to .gz my folder public_html:
media/sda7/user1/public_html/
I want all files and folders and subfolders and images and everything inside of public_html. Also to be saved on the same folder so i can find it easy How can i do it?
I am attempting to copy a set of sub folders from their multiple parent directories to a new location.
For example, I have three folders to copy:
I would like them to be copied to:
In actuality there are many folders besides folder1, folder2, folder3, and no numerical order exists. So, the folder named 'photos' would be copied to its parent folder's name in a new location. I would need this to occur for all folders in the '/home/user' directory.
During two instances now I have had to create a .js file in a folder. In one instance, (POLIPO) I can create the file, I just cannot save it. I have momentarily forgotten the error message stating why. In the second instance, I have to create a user.js file inside my Firefox folder to allow cut/copy/paste functionality in order to fully utilize an internet forum. I have a Windows desktop at home and used URL...to "fix" Firefox. My laptop, however, needs to have the same capabilities and is running Ubuntu 9.04, fully updated, and Firefox 3.0.17, fully updated.
In short, I would like to know how to have complete control over functions such as "create file" EVERY time I want to. Is this a permission issue? I have only one user on the Ubuntu box. Also, how can I modify Firefox to allow for cut/copy/paste in the Mozilla Rich Text Editor?I am new to using Linux, so a minor spoonfeeding may be required.
I can't write to directories inside my main file system. This is annoying, how to change?
View 3 Replies View RelatedI have encountered a problem:I have "while" loop; at each run a set of outputs is produced but then I need to shift them into a corresponding folder ; otherwise next run the new outputs will be over-written. Furthermore, I need to pipe what I have on the screen inside a file. I have put my code in the following:
Code:
# !/bin/bash
jf="GeoQuery.jar"
[code]...
I have around 150+ folders in one directory. All contains some pdf files. Now i want to give some prefix no. to folder only not the files inside. How can i give the prefix to all my folders?Eg : Suppose i want no. 8562 then i want it like as follows
OLD FOLDER NEW FOLDER
ABC/ 8562-ABC/
AABC/ 8562-AABC/
I have just recently installed Fedora 14 Standard Edition. Upon after mounting another parition, I attpempt to find the new partition files in the directory I created for the mount point, but it is not showing. I know the mounted parition is there becuase upon "ls -l /iso", all the files show up.
I had previously tried out Fedora 14, XFE, and this problem did not occur. I also previously installed this same Standard Edition, and this problem did not occur. This is from the exact same download, however, the only difference is I installed Grub into a different partition. But now I am unable to find my new folders in Gnome.
I recently had to rescue files from a dying hard drive using Photorec. However, it dumped the files randomly in many different directories. Is there a way I can transfer the contents of these directories into one master directory without the file structure. For example, I have folders 1 through 10 as subdirectories in folder X. How can I transfer the contents of all those folders into folder Y while getting rid of the subdirectories 1 - 10?
View 3 Replies View RelatedSo I have a share hosting account with 60 sites all running wordpress.
There is a plugin I want to delete from all 60 wordpress sites.
The plugin is in the same path in all 60 sites.
mysite.com/wp-content/plugins/carter Is there a way I can search the entire home directory with filezilla or another ftp and delete every folder with that name in every site or I have to do it the tedious 1by1 sucky way?
I am running Karmic (9.10) on my macbook air (2,1) and although many things work fine (I wrote about it here:[URL]) one of the last things that doesn't work is setting the screen brightness. The FN-F11/F12 combo does bring up the brightness adjustment notification window (top right) and I can change the setting, but it has no effect UNTILL I reboot or suspend to RAM and reboot.
A related issue is that the brightness doesn't automatically adjust to the surrounding brightness.
When I first installed Maverick on my Dell Laptop, I had a slick-looking notification display when I changed the volume via the media buttons.However, I made some changes to get the media buttons to control the PCM volume channel, and it now seems I'm stuck with this ugly notification that I cannot figure out how to get rid of:I'm not entirely sure this is what borked my original volume notification, but it was around this time I noticed the change.
View 4 Replies View RelatedI want it to only display the directories in the folder, but when I use ls -d, it tells me the only directory is '.' .But, if I use ls -p it recognises the directories for what they are.
Code:
[root@xxx test]# ls
dir1 dir3 file2.txt file4
dir2 file1.txt file3.txt file5
[code].....
I have also tried dir -d, with the same results...
the command to display top 10 files and top 10 directories on a linux system.
View 4 Replies View RelatedI just tried changed the port that apache runs on from 80 to 8080 (I need port 80 for a difference service so I am changing the apache port). After doing this I load 127.0.0.1:8080 in a browser and get a 404 error generated by apache, if I change it back to 80 it works fine.
View 2 Replies View Related(Video card is a nothing special Nvidia)
I want to change the default resolution of 1280x1024 to 1024x768. Setting at boot using the space bar or the KDE display (personal settings) does not survive the next boot. In yast or yast2, hardware, there is no monitor selection (something wrong here?).
Using root, run level 3, the command sax2 --vesa 1024x768 does nothing.
or sax2 -m 0=fbdev does nothing.
I had no problem with previous suse releases. What am I missing?
i am in need of linux help. iam at college and i need this back/restore script to pass this final part of an assessment. i require a backup script that will not only backup but also restore files to the relevent directories. e.g. users are instructed to store all wordprocessor files in a directory named wp. so i am needing to create a backup directory and 3 directories within that and some files within the 3 directories and then back them up ot restore them. l know i should/have to do this myself by been trying to get/understand info for the last few days and came up with zero.
View 14 Replies View RelatedI want to make a webserver with multiple users allowed to login through SFTP to a specific folder, www.Multiple users are added, lets say user1 and user2, and all of them belonging to the www-data group. The www directory has an owner www-data and a group www-data.
I have used chmod -R 775 on the www folder, but after I try to create a folder test through my SFTP server (using Filezilla) the group of the directory created has only r and x permissions, and I am not able to log in with the second user user2 and create a directory within www/test due to a lack of w permission to the group.
I also tried using chmod 2775 on www directory, but without luck. Can somebody explain to me, how can I make it so that a newly created directory inherits the root directory group permissions?
is there a way to display a list of all the files changed during current session?
View 4 Replies View RelatedI am writing a script, in that my requirement is, if all the fill types stored in one directory from that we need to separate different different directories based on the file types.
for example in a directory(anish). 5 different types files
1- directory
2- .txt files
2- .sh files
like that and my requirement is the (1- directory is moved to one new directory(dir) which we are given in the script)and (2 .txt files are moved to another new directory(test) which we are given in the script)and ( 2 .sh files are moved to another new directory(bash) which we are given in the scrip)finally the directory anish should be empty..using bash script.how it is possible !!
I have a 3TB home server storing all my files and a mix of XP, Vista & Ubuntu clients on a Gigabit network. When I access a folder with JPEG photos on the XP or Vista machines and I have them set to display thumbnails that is exactly what I get. The thumbnails load nice and fast. When I access the same folders on the Ubuntu machines with "icon view" it only displays a black icon that says "JPG" but if I copy that folder over to a local drive on the Ubuntu machines then the thumbs display just fine. Does anyone have any idea how to change this on the Ubuntu machines so they load thumbnails for networked photos as well?
View 3 Replies View RelatedNew ubuntu user here, and i feel 100% comfortable with it now other then command line
i love it, feels better then windows, and im in awe at how fast it boots
i have 2 gripes only, that im hoping can be fixed!
is there anyway to make ntfs hidden fils hidden again?
i have a storage partition that i use on windows, and now ubuntu, the problem is theres all sorts o wierd ****
like "system voume information, RECYCLEBIN-O1" and wierd crap like that
its usually hidden in windows, but visible and clickable in ubuntu
is there some way to hide these files and folders? i think windows needs them, but they look so bad and ruin my folder organization
and also, is there some way to have my storage partition always mounted? each time i restart i lose my music library in rhythembox, and have to redirect it to my music folder on my storage drive.
i'm having a problem with my bottom panel, after changing from ubuntu 9.10 to ubuntu lucid lynx it does'nt display the programs or folders open on the system
View 1 Replies View RelatedI have a 3TB home server storing all my files and a mix of XP, Vista & Ubuntu clients on a Gigabit network. When I access a folder with JPEG photos on the XP or Vista machines and I have them set to display thumbnails that is exactly what I get. The thumbnails load nice and fast. When I access the same folders on the Ubuntu machines with "icon view" it only displays a black icon that says "JPG" but if I copy that folder over to a local drive on the Ubuntu machines then the thumbs display just fine. Does anyone have any idea how to change this on the Ubuntu machines so they load thumbnails for networked photos as well?
View 1 Replies View RelatedI can't use images on Ubuntu Brainstorm.
View 2 Replies View Related