ok so i was wondering if there a program that i can use to back up all my programs and ubuntu to a boot able disk so say soming went wrong and i had to start over i could pop in the disk and reinstall with all my stuff ready is their a easy way of doing this if u need more info on wat i mean
View 6 RepliesI come from a PCLinuxOS tradition (about two years), and a great full backup program was mklivecd, where I would use a GUI to make a bootable livecd/dvd with all my system which was handy in case something went wrong. Every week or so I would create a DVD ready for emergencies. After looking at the options in Debian (using Squeeze, and very happy with it for a few months now), I'm wondering if there is something similar. Remastersys, it seems, doesn't work with GRUB2 (only with GRUB-legacy), and Partimage makes images, not bootable CDs/DVDs. What is your full-backup/bootable system strategy, something, if possible, as easy/straightforward as mklivecd?
View 8 Replies View RelatedI want to do a clean re-install of Windows 7 but there are files and installed programs which need to be backed up and restored. I tried using the Windows 7 backup utility to do a full backup to an external usb drive. The problem is that whenever the backup gets close to finishing, it always crashes. The system I am backing up has been compromised by viruses, which might be causing this. I already used several utilities to get rid of the viruses but some of the damage they did can not be undone. I tried doing the backup in safe mode but Windows 7 does not allow this. What other methods can I use to backup and restore important programs and files on Windows 7? Perhaps there is a way to do it from outside Windows 7, like say, using a Linux live cd? One of the main problems I see is restoring installed programs since those make use of the registry so simply copying the files probably won't work.
View 3 Replies View RelatedIs it possible to install GRUB in the MBR of the only bootable disk in the system, but load configuration and images from another disk?Basically I want to install GRUB on /dev/sda, but menu and images will be under /dev/sdb2.Note: /dev/sdb is not bootable.
View 14 Replies View RelatedWhen i backup my /etc-directory with rsync it is 1.7MB big.I checked etc. It is about 65MB.Oh...I figured out that the most big dir under /etc is "alternatives", say 55MBI unpacked the etc_backup.tar.gz. It is about 65MB.I pack it back together: 1.7MB.btw: if i do ls -hl i always get 4.0K . To check the size of directories i need to use a filemanager. That sucks. A tip?
View 7 Replies View RelatedI created a bootable USB for WHS but when starting my server it says �utomatic boot starts in 10 seconds".It then counts down to zero and in stead of starting the automatic boot is restarts with 10 seconds and counting back again.Did I do something wrong ? I have a WHS ISO file and used unetbootin to create a bootable USB stick (I tought)My server finds the USB stick and displays a blue window with UNetbootin at the top.Next line says "default" but thats it.
View 1 Replies View RelatedDo you know if you can burn (or mount - whatever) Ubuntu on a CD from Ubuntu, or must you do it with Windows?
View 2 Replies View RelatedRecently my had disk crashed. It has taken me over a day to install and setup the drive - time I can't really afford. I'd like to know how I can clone a second as a bootable copy of the main hard drive and update from time to time. Therefore if the main hd fails again, I can simple boot from the second drive.How can I do this? I have two sata drives in the box, running 10.10 desktop.
View 1 Replies View RelatedRecently my had disk crashed. It has taken me over a day to install and setup the drive - time I can't really afford.I'd like to know how I can clone a second as a bootable copy of the main hard drive and update from time to time. Therefore if the main hd fails again, I can simple boot from the second drive.
View 1 Replies View RelatedI'd like to have a bootable cd which then allows me to clone a hard drive, much like the "Ghost" application. I need to copy Fat32, NTFS, as well as the various Linux formats. I've not created a bootable cd before, so a step-by-step would be rather handy.
View 2 Replies View Relatedmy old pc died not long ago so I retrieved its hard disk and bought a USB enclosure. that HD had a ubuntu 9.04 partition and an XP one. Something must have gone wrong somewhere as, although i could still boot from jaunty, I was not allowed to upgrade.
It therefore seemed to me natural perform a clean install, so here's what I did:
- on a win7 computer, I inserted a 9.10 bootable disk
- with usb-disk creator, I wanted to install via a spare image so re-formatted the HD
- I couldn't install a mythbuntu 9.10 after that as I giot an error message ("can't mount the drive" or something similar). yet, in win7 the HD is recognised.
So, what am I doing wrong? Are USB HDs not included as USB devices that you can make bootable? Or should I be installing a !straight" ubuntu version, then install MythTV?
I would like to have a bootable disk that starts Grub legacy (not Grub 2). I have the /boot/grub/menu.lst that works for my system. When I had a floppy disk I used the option to create same from Startup Manager, but haven't found a way to create a similar disk.
View 4 Replies View RelatedHow to make a usb disk on key bootable?
View 3 Replies View RelatedI have a PowerPC computer, but it has troubles writing onto CD's. It reads fine, but anyway, is it possible to make the CD from my Windows x86 computer? It will be the PowerPC version [URL], but it will not be burnt from a PowerPC computer.
View 3 Replies View Relatedhow to get a working bootable USB boot disk for DOS using Fedora 12. I needed the dos boot disk to flash my motherboard BIOS as it did not support linux for updating the bios. Thought I'd put the steps involved to help other people who wanted to do something similar. The steps outlined here are for a Fedora 12 system. You should be able to extrapolate the minor changes that may be required for other linux distributions. All commands listed below to be typed in on a command prompt, logged in as root. Here goes...
1. Prerequisites:
syslinux
testdisk
freedos base cd (http://www.freedos.org/)
[code]....
Acknowledgments:
1. [URL] for enlightening me on the fact that testdisk could be used instead of install-mbr
2. [URL] upon which this howto is broadly based.
The performance of my suse install under Virtual Box is starting to affect my work, and I really need access to my real multi core CPUs - can I take my vm and stick it on a bootable SD or external HD?I've read the howto move existing linux installation to usb-flash and make it bootable? but it didn't work for me (I'm not convinced I copied correctly).
View 1 Replies View RelatedI have a box that can not boot from USB, yet it can boot from floppy - how can I save the bootloader on a floppy and make it boot from USB?
View 1 Replies View RelatedI am trying to create a bootable DVD disk of Fedora. I am having trouble in doing this. I want to format the Hard drive and create a new file system. I have downloaded the source cds for fedora12 AND fedorai386 downloads. I have been trying to create a DVD burn with the Fedora12.iso extracted and then burned to DVD. This does not work. I just want to be able to pop the DVD in and then start the install, and on any machine.
View 3 Replies View RelatedAnyone here knows the OpenSuse install CD runthrough? I am using DELL pc's, and remember installing Linux as being a few almost basic steps on my self assembled clone pc's in my youth. Now, over ten years later I want to redo that and return to my old playground. I am using after over 12 years administering MS stuff again applications running on unix (solaris) at my work. Its like homecoming but in a difficult way, I am brainwashed and not really into unix anymore. So... lets install linux again at home. Returning to my favorite Suse distribution in the old days (who knows why).
I went through the installation (Opensuse11) simple, standard to start with, so mainly next (ACPI disabled). Rebooted... and the pc finds no recognized bootable HDD. OK, well, try again, other HDD to be sure, results in the same. Set manually the root partition as active. No go, I feel as a newbie again. What happened to me in those last years? Tried to do it also with a fedora distri - same outcome. When plugging these HDD in another recent (DELL) pc, it also does not recognize the HDD as bootable. Both disks have been part of a system before and functioned; until I changed this system for this other purpose. Probably i am missing something basic??
what is the procedure to make a bootable disk from ISO images downloaded from Red Hat Enterprise site?
View 8 Replies View RelatedI have an internal hard drive split between Windows 7 and Fedora 12. The Fedora 12 install exists on a LVM which presents a bit of a challenge when trying to mirror the drive. I was trying to use gparted but it doesn't have support for LVM. I discovered g4l, which does a bit-by-bit copy and ran a full disk copy using that from the 500 GB internal to a 500 GB external. Inspecting it with gparted, the copy LOOKS like it went correctly.
However, when I disconnect the internal and attempt to boot to the external (specifically in the BIOS), it's unable to boot to it. It instructs me to insert bootable media and try again. Has something gone wrong with the copy? It SEEMS like g4l finished faster than it should have given the copy rate it was operating at (I had figured out when it should finish up), but the screen saver had been on and when I came back it was back at the menu, so I don't know if it got to 100% or ended prematurely? There were certainly no error messages...
Alright story is: i needed apache tom cat to work on my project, i don't wish to install it in ubuntu so i can keep my system clean and fast. I installed virtual box OSE. Do i need a disk to run? Cause it says "Fatal no bootable medium found system halted" Edit: alright i inserted my winxp disk and now it is installing, i need to know if any change i make will damage my computer? Since i allocated only 10GB to this virtual disk, now it is formatting it in NTFS...i hope it won't have any conflict with ubuntu's ext4 file system.
View 2 Replies View RelatedI want to make a live USB drive, perhaps even 1 with its own GRUB and a choice of operating systems..Its 16gb so it will fit..or maybe just install multiple desktop environments so I can switch depending on the resoruces of the computer I am using..Gnome>E17>LXDE.But I want it to be a regular account with a root/administrator password, ect. When I use the Startup disk creator or Unetbootin I find that the results are pretty limited. I might as well be using a live CD, but thats not ideal. Alternately, when I just install normally it doesnt always load, even when I hit F8 and tell it to boot from my USB drive.Knoppix based distros seem to work better than Ubuntu based distros in this regard, but I dont want Knoppix I want Ubuntu/Mint and friends.Finally, I have sometimes been having problems 'mounting' or using 'swapon'. Even when I turn on Swap with Gparted Im still not getting the benefit of the large swap area I have created..is this because of how the operating system uses swap? Is there a live distro that will save files and settings to swap before using up ram, by default? If not, is there a way to change the behavior of Ubuntu Live CD?
Is there a reason why we cant make proper paragraphs? Is this site strapped for bandwidth or something? Is the site just acting funny?
I wish to create a bootable disk for my existing grub legacy. I do not have a floppy drive. Could this be done on a CD-RW or flash drive?
View 1 Replies View RelatedI have a USB which I would like to make the device boot able. I have looked into fdisk and it appears that using fdisk I can only set a partition to a boot able. Please have a look at the output of fdisk command. In the following the sdb1 and sdc1 are both USB Memory Stick. As you can see the sdc1 is set as boot but the sdb1 is not.
Code: Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
For old machines, is this bootmanager plop floppy disk exists? [URL]
View 1 Replies View RelatedDoes anyone knows "How to recover a root password using bootable fedora Linux 11 disk?
View 1 Replies View RelatedHow to create a bootable cd/dvd from downloaded iso images of CentOS 5? I have collected all the iso in a dvd but it is not booting the system.
View 5 Replies View RelatedI modified the thinclient OS PXES cfg file. Now I want to create bootable disk of pxes.iso file so that I can mount in Virtual box and check whether it wirks properly. I first created a normal ISO using MAgic ISO. When I try to create a bootable disk using the same ISO it asks for "load boot information file". I don't know which file should I select. All I want is to create bootable disk of the customized PXES OS and mount in virtual box and test it?
View 1 Replies View RelatedI have installed a RH on my laptop. It is a lenovo T400. I made a clone of the laptop disk through the command:
dd if=/dev/sda of=dev/sdb
I picked the copied disk and installed it on a lenovo T410
I works almost great, as all my installation was working excepting the Xwindows part.
for a while, I thought it could be related to the xorg.conf file. So I replaced my xorg.conf file by a fresh that came from a fresh installation on a T410. This did not change anything.
I guess I missed something within the X11 configuration but I can t figure out what.