I created a bootable USB for WHS but when starting my server it says �utomatic boot starts in 10 seconds".It then counts down to zero and in stead of starting the automatic boot is restarts with 10 seconds and counting back again.Did I do something wrong ? I have a WHS ISO file and used unetbootin to create a bootable USB stick (I tought)My server finds the USB stick and displays a blue window with UNetbootin at the top.Next line says "default" but thats it.
I have been having problems hibernating my windows 7 partition recently. It happened approximately right after I set up the dual boot.
I have found other topics where it says to make sure that the windows 7 partition is marked as the active partition. I have since done so and it has not changed anything. I did it with Partition Magic on Windows. I did find it suspicious though that my Dell Recovery partition is labeled as boot while the Windows one is marked as Active and System.
However when I looked at it using disk utility in Ubuntu the windows 7 partition is marked as Bootable while the recovery partition is not.
Hibernation works on Ubuntu with a couple error messages while shutting down and some weird screen issues while booting up. But it ends up working decently.
Under Disk Utility the Ubuntu Partition is not marked as Bootable. Should it be?
Today I installed Fedora (I need it for school), but not everything seems to work fine Before installing Fedora on my Macbook I had a triple booting machine: Mac OSX snow leopard, Windows 7 and Ubuntu. (using rEFIt) All of them where working. Since I installed Fedora on the 4th partition I can only boot Mac OSX. When selecting one of the other OS's it says: "no bootable device insert boot disk and press any key"
Is it possible to install GRUB in the MBR of the only bootable disk in the system, but load configuration and images from another disk?Basically I want to install GRUB on /dev/sda, but menu and images will be under /dev/sdb2.Note: /dev/sdb is not bootable.
Recently my had disk crashed. It has taken me over a day to install and setup the drive - time I can't really afford. I'd like to know how I can clone a second as a bootable copy of the main hard drive and update from time to time. Therefore if the main hd fails again, I can simple boot from the second drive.How can I do this? I have two sata drives in the box, running 10.10 desktop.
Recently my had disk crashed. It has taken me over a day to install and setup the drive - time I can't really afford.I'd like to know how I can clone a second as a bootable copy of the main hard drive and update from time to time. Therefore if the main hd fails again, I can simple boot from the second drive.
ok so i was wondering if there a program that i can use to back up all my programs and ubuntu to a boot able disk so say soming went wrong and i had to start over i could pop in the disk and reinstall with all my stuff ready is their a easy way of doing this if u need more info on wat i mean
I'd like to have a bootable cd which then allows me to clone a hard drive, much like the "Ghost" application. I need to copy Fat32, NTFS, as well as the various Linux formats. I've not created a bootable cd before, so a step-by-step would be rather handy.
my old pc died not long ago so I retrieved its hard disk and bought a USB enclosure. that HD had a ubuntu 9.04 partition and an XP one. Something must have gone wrong somewhere as, although i could still boot from jaunty, I was not allowed to upgrade.
It therefore seemed to me natural perform a clean install, so here's what I did:
- on a win7 computer, I inserted a 9.10 bootable disk
- with usb-disk creator, I wanted to install via a spare image so re-formatted the HD
- I couldn't install a mythbuntu 9.10 after that as I giot an error message ("can't mount the drive" or something similar). yet, in win7 the HD is recognised.
So, what am I doing wrong? Are USB HDs not included as USB devices that you can make bootable? Or should I be installing a !straight" ubuntu version, then install MythTV?
I would like to have a bootable disk that starts Grub legacy (not Grub 2). I have the /boot/grub/menu.lst that works for my system. When I had a floppy disk I used the option to create same from Startup Manager, but haven't found a way to create a similar disk.
I have a PowerPC computer, but it has troubles writing onto CD's. It reads fine, but anyway, is it possible to make the CD from my Windows x86 computer? It will be the PowerPC version [URL], but it will not be burnt from a PowerPC computer.
how to get a working bootable USB boot disk for DOS using Fedora 12. I needed the dos boot disk to flash my motherboard BIOS as it did not support linux for updating the bios. Thought I'd put the steps involved to help other people who wanted to do something similar. The steps outlined here are for a Fedora 12 system. You should be able to extrapolate the minor changes that may be required for other linux distributions. All commands listed below to be typed in on a command prompt, logged in as root. Here goes...
1. Prerequisites:
syslinux testdisk freedos base cd (http://www.freedos.org/)
[code]....
Acknowledgments:
1. [URL] for enlightening me on the fact that testdisk could be used instead of install-mbr
The performance of my suse install under Virtual Box is starting to affect my work, and I really need access to my real multi core CPUs - can I take my vm and stick it on a bootable SD or external HD?I've read the howto move existing linux installation to usb-flash and make it bootable? but it didn't work for me (I'm not convinced I copied correctly).
I am trying to create a bootable DVD disk of Fedora. I am having trouble in doing this. I want to format the Hard drive and create a new file system. I have downloaded the source cds for fedora12 AND fedorai386 downloads. I have been trying to create a DVD burn with the Fedora12.iso extracted and then burned to DVD. This does not work. I just want to be able to pop the DVD in and then start the install, and on any machine.
Anyone here knows the OpenSuse install CD runthrough? I am using DELL pc's, and remember installing Linux as being a few almost basic steps on my self assembled clone pc's in my youth. Now, over ten years later I want to redo that and return to my old playground. I am using after over 12 years administering MS stuff again applications running on unix (solaris) at my work. Its like homecoming but in a difficult way, I am brainwashed and not really into unix anymore. So... lets install linux again at home. Returning to my favorite Suse distribution in the old days (who knows why).
I went through the installation (Opensuse11) simple, standard to start with, so mainly next (ACPI disabled). Rebooted... and the pc finds no recognized bootable HDD. OK, well, try again, other HDD to be sure, results in the same. Set manually the root partition as active. No go, I feel as a newbie again. What happened to me in those last years? Tried to do it also with a fedora distri - same outcome. When plugging these HDD in another recent (DELL) pc, it also does not recognize the HDD as bootable. Both disks have been part of a system before and functioned; until I changed this system for this other purpose. Probably i am missing something basic??
I have an internal hard drive split between Windows 7 and Fedora 12. The Fedora 12 install exists on a LVM which presents a bit of a challenge when trying to mirror the drive. I was trying to use gparted but it doesn't have support for LVM. I discovered g4l, which does a bit-by-bit copy and ran a full disk copy using that from the 500 GB internal to a 500 GB external. Inspecting it with gparted, the copy LOOKS like it went correctly.
However, when I disconnect the internal and attempt to boot to the external (specifically in the BIOS), it's unable to boot to it. It instructs me to insert bootable media and try again. Has something gone wrong with the copy? It SEEMS like g4l finished faster than it should have given the copy rate it was operating at (I had figured out when it should finish up), but the screen saver had been on and when I came back it was back at the menu, so I don't know if it got to 100% or ended prematurely? There were certainly no error messages...
Alright story is: i needed apache tom cat to work on my project, i don't wish to install it in ubuntu so i can keep my system clean and fast. I installed virtual box OSE. Do i need a disk to run? Cause it says "Fatal no bootable medium found system halted" Edit: alright i inserted my winxp disk and now it is installing, i need to know if any change i make will damage my computer? Since i allocated only 10GB to this virtual disk, now it is formatting it in NTFS...i hope it won't have any conflict with ubuntu's ext4 file system.
I want to make a live USB drive, perhaps even 1 with its own GRUB and a choice of operating systems..Its 16gb so it will fit..or maybe just install multiple desktop environments so I can switch depending on the resoruces of the computer I am using..Gnome>E17>LXDE.But I want it to be a regular account with a root/administrator password, ect. When I use the Startup disk creator or Unetbootin I find that the results are pretty limited. I might as well be using a live CD, but thats not ideal. Alternately, when I just install normally it doesnt always load, even when I hit F8 and tell it to boot from my USB drive.Knoppix based distros seem to work better than Ubuntu based distros in this regard, but I dont want Knoppix I want Ubuntu/Mint and friends.Finally, I have sometimes been having problems 'mounting' or using 'swapon'. Even when I turn on Swap with Gparted Im still not getting the benefit of the large swap area I have created..is this because of how the operating system uses swap? Is there a live distro that will save files and settings to swap before using up ram, by default? If not, is there a way to change the behavior of Ubuntu Live CD?
Is there a reason why we cant make proper paragraphs? Is this site strapped for bandwidth or something? Is the site just acting funny?
I have a USB which I would like to make the device boot able. I have looked into fdisk and it appears that using fdisk I can only set a partition to a boot able. Please have a look at the output of fdisk command. In the following the sdb1 and sdc1 are both USB Memory Stick. As you can see the sdc1 is set as boot but the sdb1 is not.
Code: Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
I modified the thinclient OS PXES cfg file. Now I want to create bootable disk of pxes.iso file so that I can mount in Virtual box and check whether it wirks properly. I first created a normal ISO using MAgic ISO. When I try to create a bootable disk using the same ISO it asks for "load boot information file". I don't know which file should I select. All I want is to create bootable disk of the customized PXES OS and mount in virtual box and test it?
I have installed a RH on my laptop. It is a lenovo T400. I made a clone of the laptop disk through the command:
dd if=/dev/sda of=dev/sdb
I picked the copied disk and installed it on a lenovo T410
I works almost great, as all my installation was working excepting the Xwindows part.
for a while, I thought it could be related to the xorg.conf file. So I replaced my xorg.conf file by a fresh that came from a fresh installation on a T410. This did not change anything.
I guess I missed something within the X11 configuration but I can t figure out what.
