General :: Can I Show A "welcome" Splash Page For My Ad-hoc Network
Aug 23, 2011
Is there a way to configure an ad-hoc network to have a splash/welcome page? Similar to how NoCat works with routers?
Basically if a user connects to my ad-hoc network it would re-direct them to a splash page that says Welcome to xx Network and list some terms before letting them visit another page.
I updated Firefox today via Yast, since this time it doesn't show any page.I choosed in Configuration no proxy.The sites are empty, nothing just white.I also tried a downgrade to the previous version, didn't help.The Firewall I deactivated for test in Yast, too.A new profile didn't help, starting as administrator either not.
i have a splash screen i want to use while gnome is loading (well it is a pic rather than a splash) rather than black screen till gnome i use ubuntu 9.04 or macbuntu as i call it (is looks exactly like a mac) so can i use a image while gnome is loading ?
I am at a loss trying to figure out the options to not show the scrolling boot messages during the boot-up of Clonezilla. Is there a way to have a loading splash screen or even have a static logo that is displayed during the boot process? I have my automated recovery method all ready to go short this one last feature. I have searched all over and am coming up empty on this one.
I have a Toshiba M55-135S, that I switched from Windows XP to Ubuntu 10.04 about a month ago. Loved it, but lately it is hanging at the Toshiba splash page and won't complete the boot without turning the laptop off an on several times. tonight it won't move pass the Toshiba splash page. Hardrive is only about a year old.
I upgraded to 10.10, system rebooted but it is stuck at a constant loop.
I can go into safe graphics mode and things look fine except compiz isn't running. I have tried going into login and changing it to log me in automatically but the problem remains.
I've tried using my previous kernal and I have the same issue as this newer one.
I've tried loading gdm from CLI and the problem is still there.
I've just installed Plymouth on my BLFS distro and I can't figure out how to make it show the splash. I know you have to tell it to show the splash early in the boot process. Is there a file that I can add the commands to? I might be going at this all wrong.
i changed the boot up resolution in the boot up loader to 1366*768 (native res of my monitor) the boot option is still set to quiet splash however, instead of showing the progress bar, it would now always display the complete boot up log ( the list of starting services and such) i then manually changed the boot option from to 1024*768 at boot loader screen, and teh splash would show up, but then on next boot up if i stick with 1366*768, it doesnt work again
I want to put a photo slide show in a web page I am creating. What is my best option? Want open source. I know CSS and HTML but am not a programmer. Need something fairly easy to install.
I did a perl/cgi script for uploading image. The script works, image is iploaded in upload directory, but the problem is: How can I to load and show image in web page?
I have apache installed and I have it all setup so that when I create a user, in their home directory i created a folder called public_html and then that user can upload web content. Users then can browse to their site by going to[URL],,.How can I get apache to show a different or default page if the user does not have a index.html file in their public_html folder. Cause if they dont, you get a 401 saying you dont have permissions to view, etc. So id like apache to default to something else if the user doesnt have a index.html.
Having logged in (to Fedora 11) with a terminal session, what command do I give to spawn the Gnome GUI desktop environment? Background: I'm running two Fedora boxes: one local, and one at the other end of my building (on fast LAN). I have full control/ownership of both boxes.
On the local box, I log-in to my vanilla F11 build, and I get the Gnome GUI automatically. Then I can open a terminal window, 'ssh -X -l myself remotebox; cinelerra' to run Cinelerra nicely in local desktop windows.
But sometimes I want to see my typical user desktop for the remote box. Now, IF the remote box is ALREADY running Gnome, I can VNC to it, etc. But, once having logged-out of the remote box, VNC closes and won't show me a GUI login page. (BTW: The remote box usually has no monitor, as well as being out of reach. So schlepping over to logon to it is a real pain.) So, here's the thing: I can login (to terminal session) and can bring up programs in local windows. But WHAT program do I launch in order to bring up Gnome??
(I am new to Ubuntu though have experimented with various Linux flavors in the past.) I have been struggling with this issue with Firefox 3.6.17 on Ubuntu 10.10. When I start Firefox it always loads the previous session's tabs, though I have the option set to load home page, not restore tabs. Where would it be picking this up from ?
Is it possible to tweak 11.04 to show the old toolbar at the top of the desktop page? If I want to put apps on the desktop how do I do that from the apps page?
All has been fine with my emails but today morning when i tried to log on I got an error message "You must be logged in to access this page, go to logon page" I dont understand why even when i supply my correct user name and password.
I want to combine 4 ps(or pdf) page to single page and for this i have try a2ps command as:
a2ps -4 1.ps 2.ps 3.ps 4.ps -o outfile.ps
Event through it divide the page into four section. But only give one output of my four input. other three section is blank. Is i am doing some wrong or Is their any other command to do so.
On Windows 7, I have VirtualBox running Linux (Ubuntu 8.04), with Samba set up so that the Windows host can access it. But if the virtual machine is shut down & restored, or rebooted, the Windows Network no longer shows it. I've tried refreshing many times, restarting Samba, disabling/enabling the virtual network adapter, and running the succession of commands ipconfig /release, ipconfig /flushdns, & ipconfig /renew, but none worked. As a last resort I could restart the host itself, but is there a better way?
I am using a fully up to date openSUSE 11.3 and today, I decided to upgrade my KDE 4.4.4 to Factory. The update went without a hitch, everything continued to work, including all of the items in my workspace.So now I am running KDE 4.4.95 and it looks nice. I like the new System Settings where the advanced tab is gone and everything is presented in a single window.
The only snag I have hit so far, is that Knetworkmanager no longer displays the network that I am connected to when I right click its icon in the tray. The screenshot may make clear what I am talking about.I am currently connected via a wireless network, which nm-tool confirms. However, it is not shown in the Knetworkmanager menu.
If I re-install Grub 2 from the live CD should that reset all the personalisations such as as splash screen and colours in the Grub splash to default? In my case they are not resetting. I would expect them to revert to the default black/white you get when initially installing the OS. the Grub timeout to be a lot less than its supposed to be? e.g. the default timeout setting of 5 seconds is more like 2 or 3 in reality, and when I set my prefered value to 2 seconds it results in being about 1/4 sec or so.
Since updating my graphics driver on ubuntu 10.10, My splash screen has been inconsistant and messed up. Sometimes ill get random command lines mixed in with the usual splash, sometimes the splash wont show and it will just be black till the desktop appears, sometimes it flashes on and off. I originally tried fixing the resolution and just made the problem worse. Then I tried installing a new splash via gnome-look.org, but it just made my shut-down splash blank and didnt effect my splash at startup. I just want the original splash that ubuntu is supposed to have.
I'm running 64 bit Ubuntu, and on the start-up after I pass the GRUB it goes blank for a minute then briefly shows the splash for 5-10 secs and then jumps to the login screen. Also the screen is offset by about 10-15 pixels but from the login screen onwards it is centred. (It's also like this for if I'm in recovery mode) How do I fix this and Im wondering if it is a hardware problem?
I have a question regarding to the Graphical Splash Screen. Is their a way to show the text based startup on booting your OS? So. I don't the OpenSuse Background with the loading line. But i want the half transparent black background if possible or just the black background with all the loading texts. The black and white screen.
I recently installed Ubuntu Studio and after an update the standard Plymouth splash screen began to show. I tried changing it back via the "sudo update-alternatives --config default.plymouth" method but I am getting a blue kbuntu splash screen instead of the ubuntu studio splash.
I am relatively new at Linux and am having some problems with an install of openSUSE 11.2. I installed 11.2 on my Thinkpad X31 dual boot with WinXP. It seems to work very well except the network. I looked up swerdna's instructions on setting network cards up. I used YaST to try and set the system up as described in swerdna's instructions. Everything looks fine my network card and wireless card show up in the overview settings screen and everything sets up fine. But when I exit YaST the network doest show up no icon in the system tray and it doesn't even try to connect.
I did go into hardware to see if it was identifying my hardware and my network card shows up as "Thinkpad R40" and the wireless shows up as Cisco Aironet Wireless 802.11b. As far as I know this is correct. I have tried three other distro's and this one has gotten the closest to working so far.
I remember when using openSUSE 11.3 with KDE 4.5, the network connections started to show the last date used for my "NIC".I am using the plasmoid-networkmanagement plasmoid and KNemo.After I downloaded and installed openSUSE 11.4 64-bit, the network connection no longer shows the last date used. I have set up my card via Yast and Iam connected directly to the Internet. No proxy.To find where this is located, navigate to:Configure Desktop --> Network Settings --> Network Connections --> Wired tab.
I'm trying to make some pages. For this I try to host them locally. However, when I have an error in my PHP code, the server shows an internal error 500 page and doesn't show on what line and what compile error it encountered. There is no such information in the error log either. What should I do about it, it's not really nice to comment all the lines and then try to uncomment them one by one. I've been googling for a while, but didn't find anything.. I forgot to mention, I;m using Fedora :P, the apache that came with it and mysql and php from the repository...
I configured it to use IMAP to access our exchange 2010 server front end on a LAN connection. Our webmail connection is segregated behind Forefront, so it was not connecting/authing that way. Even though smartphones have no problem. (sidenote, is there an activesync linux mail client ?)
I have many root folders and several folders underneath my inbox. total mailsize in inbox is 3.5 GB without subfolders. The sent is likewise as large. And is likewise empty.
Things I checked already: View is all Folder subscription is on and local copy is on
More info: Thunderbird worky fine. But thunderbird is missing calender Tried adding lightening, but it won't add into thunderbird. Will try finding a diff add on, or if anyone knows how to get lightening into thunderbird 3.1.8 on ubuntu 10 that would be great as well.
I just installed openSUSE 11.4 on my 2 home machines. My home network lies behind a nat router but I still use the external zone setting for my firewalls. In the past to enable network printing between the two computers I opened TCP and UDP port 631. Yast would then see the remote printer, set it up and all was good. This time Yast sees and sets up the remote printer as usual. When I print the test page nothing happens. Checking the cups admin page at localhost:631 on the host machine shows the printer is set up to share but nothing is in the print que. Printing works just fine on the host computer.