I am using cent os 5. When we turn on the PC I can see things which are going to be loaded and the status is [ok] in green colour. Which file linux uses for this process.
View 1 Replies
I am bored of watching the same white color on my console and want to change everything to green color including the start up.I did something like this Code: setterm -background black - foreground green -store It did change the color but not permanently.
View 4 Replies View Relatedhow do i change the green color by the white arrow?
I would like to change it to purple like my whole theme.
How to change light green text color to dark green of xterm? The xterm background is white. Light green texts are not good for white background. I don't want to change the xterm background.
View 13 Replies View Relatedeverytime I try to shutdown/reboot, it gets to the screen where it has the green/bold status messages on the side, but then it simply stops. The cursor doesn't blink, nothing happens...you could wait 10 minutes, and it would still be at that same screen. I don't know if I've described this well enough for anyone to understand, but I hope so! I don't have a camera, but if I did...I'd post a picture of where I mean...
But like I said, after getting to a certain, without actually shutting down, it simply stops and does absolutely nothing. This is rather inconvenient, and I'd like to find a solution to this if possible. EDIT: I'm sorry I didn't provide any hardware info, but I'm using Gnome...This didn't happen 100% of the time KDE like it does now though. (But it DID happen in KDE as well) I'm using OpenSUSE 11.2... I'll be back in a moment with hardware info, assuming it may aid in a solution.
[Code]...
I am working on the script parsing specific message "TEST" from multiple file. The log file name looks like:
N3.2009-11-26-03-05-02.console.log.tar.gz
N4.2009-11-29-00-25-03.console.log.tar.gz
N6.2009-12-01-10-05-02.console.log.tar.gz
I am using the following command:
zgrep -a --text "TEST" * | awk -F"[ .,]" '{sub(".*:","",$6); sub(",.*","",$7); print $1,$6,$7,$10}
and getting
N3 2009-11-25 20:12:57 TEST
N4 2009-11-28 10:42:18 TEST
N6 2009-12-01 10:00:24 TEST
If I only want to search the log file after 2009-11-29, what shall I change the command?
I want to write a script. I have the basic form working... but I would like to add some advanced features. I have a list of .zip files that have a version number in the filename (i.e. sudoku-134.zip, sudoku-176.zip, sudoku-203.zip, etc). I would like to have a script that will find the latest version of each game, and unzip it. I want the next to latest version left untouched. But anything older, I would like the unzipped folder deleted (But leave the .zip file)
Here's what I have so far:
Code:
#!/bin/bash
cd /var/www/vhosts/server.com/httpsdocs/games/$1
for file in `ls *.zip`; do
if [ -d ${file%.*} ]; then
echo
else
mkdir ${file%.*}
cd ${file%.*}
unzip ../$file > /dev/null
cd ..
echo 'date' $file >> /var/www/vhosts/games4roku.com/private/$1.log
fi
done
I can call the script with "game-unzip public" to unzip all the public games.
Here's my files:
Code:
sudoku-134.zip
sudoku-134/
sudoku-176.zip
sudoku-176/
When I add the latest version, sudoku-203.zip, I want it to unzip it to ./sudoku-203/ and rm -rf sudoku-134
Kernel 2.6.21.5, Slackware 12.0
KDE 3.5.7
(Mozilla) Firefox 2.0.0.4
Do color settings in the desktop environment affect color in the web browser? Thanks.
I use cygwin on Windows7 to open a ssh session to my linux box. When I edit a file with vim, I don't have color, only kind of gray bold. I have colors when I do a ls into my ssh session. I have also colors when I edit files from a ssh session from my linux box to my linux box. I modified the shortcut on Window7 to run cygwin in 256 colors, no effect. Do I need to set an environment variable on my cygwin session ?
On Cygwin and On Fedora when "sshed" from Gygwin : TERM=cygwin
I have a procedure say X
output of X is :
Fund name: Mutual
NAV is: 1234
So I appended this output into a file using shellscript. But now my requirement is changed. The part of output like Fund name and 1234 should be in bold. How can I do this using shell script.
I am running Fedora 11 and recently, it has been taking longer and longer to boot up. The Fedora 11 Status bar creeps along ever so slowly till eventually I will receive a login screen. I timed it at about 3 - 5 minutes from turning on the computer till I get a log in prompt.
View 6 Replies View RelatedI'm trying to compile a program from source. When I run make the following appears:./ config. status --recheck make: ./config.status: Command not found make: *** [config.status] Error 127.There is no file called config. status in the current directory. Why was it not created?
View 1 Replies View RelatedNew to Fedora (from Windows), I am up and running ok with packages from the repository but only half ok with Processing, the Java graphics programming front end from processing.org.Their download gave me a .tgz file which Package Manager extracted for me into a location of my choice and where there is now a "processing" shell script.This works ok and I have managed to create a launcher on the desktop. That starts ok but always with processing's default action of giving you a new and automatically named work file.In Windows an existing Processing file (.pde file) could be "opened-with" Processing. Trying to do similar in Fedora I find that I am expected to nominate an Application to open with but Processing has not installed as an application.I guess the question is how do I promote Processing to be an Application?Or is there a different approach?
View 4 Replies View RelatedUpon boot up the usual little mouse splash boot is suppose to come up. Once I first installed it (10.10 via usb) the boot screen worked perfectly but after I updated via the update manager the boot splash became all static and green lines across the image. It still boots up to the login screen but it's just ugly looking at it.
I have (via hwinfo)
20: PCI 105.0: 0300 VGA compatible controller (VGA)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_5a61
Unique ID: ul7N.dFXV26GrjA4
Parent ID: vSkL.CTscIjbcyd9
SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:05.0
SysFS BusID: 0000:01:05.0
Hardware Class: graphics card
Model: "ATI Radeon XPRESS 200 5A61 (PCIE)"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x5a61 "Radeon XPRESS 200 5A61 (PCIE)"
SubVendor: pci 0x103c "Hewlett-Packard Company" .....
Primary display adapter: #20
I have a ML350 tha will not boot up. I noticed that my 1st drive of 5 is out. We ordered a new hot swap 72gb SAS drive and replaced it. When I boot the computer up it flashes green and I was wondering how long it takes to rebuild typically.
View 1 Replies View RelatedI need something about file processing tutorial in terminal, about its commands.
View 2 Replies View RelatedWe have workgroup network in the home and the printer "hp laserjet p1005" connected at the server (OS : windows server 2003) and I am connected to the Internet by the server without problems. But when I want to print any file, it remains in (processing) and no print. It's picture for this problem:
View 9 Replies View RelatedIn Linux, the files were processing based on timestamp. How to process the files based on alphabets? My application is in windows. Here I am processed the files based on alphabetical order. While coming to linux its coming wrong.
View 5 Replies View RelatedI use the below loop to process each file (listed in a text file) with a software. During processing the software asks me to enter a value and continues processing of that file after I enter the value. I have those values stored in a text file "myfile". What I want is to get the values directly from myfile when the software asks "please enter the title:". I dont want to enter them all manually. But i could not figure out how to code this in Bash script.
Code:
for ((i=1,i<=$NR,i++)); do
--command of the software comes here--
done
Is anyone aware of a detailed "flow chart" -- arrows and decision diamonds, etc -- that describes the file access and permissions processing? I would love to see that diagram. Years ago on a platform far away (Digitial VAX/VMS) their manuals had such a flow chart that covered not only the user-group-owner and read-write-execute permissions decision making but also include "access control list" processing at a superficial level. If someone has access to the VAX/VMS flow chart, that might be a start toward sorting what linux does.
View 4 Replies View RelatedI'm running a blog on posterous. Some friends of me post messages there via mail, mostly with some PDF attachments. These PDFs are generated mostly on a MAC with Word. The standard extension of these files is foobar.doc.pdf. Unfortunately, Posterous ignores attachments with the extension .doc.pdf.
So, I'm looking for some workaround. For example, I could my web server with some script, which receives these mails, converts the filenames of the attachment in some way and posts the result to my posterous blog. Therefore I'm looking for some mail processing scripts, which enable me to do so.
I would like to read unix file permissions into a bash array for processing but tbh I have no idea how to do this. Then I will check for each individual access right l, d, x etc.
View 11 Replies View RelatedI have a Python script that copies a couple of DLL's and EXE to a directory before running the EXE. It can be a fresh copy or the files can already be in the target directory and are then overwritten. The script uses shutil.copy() to copy the files and that works but as the files are copying processing continues and the script tries to run the files mid copy, causing an error.
I need a way to wait for the files to finish copying before the script continues. Putting the thread to sleep isn't good enough, calling os.system("copy ...") also doesn't work, using os.path.exist() won't work because the file will exist during the copy.
i have a weird issue with my web server. every time i enter my domain name instead of processing my index file it downloads it. wth could be the problem first time this ever occurred. recently installed webmin.
View 7 Replies View RelatedI'm trying to install Adobe Reader 8 and the command #dpkg -1 AdobeReader_enu-8.1.3-1.i386.deb comes up with the message error processing AdobeReader Cannot access archive. No such file or directory. Error was encountered while processing.
View 9 Replies View RelatedCan anyone answer me the color code of the linux file system?
Especially, for those which have different colors in the background also like some have green background colors and are written in green some have yellow background and are written in black,why is it so?
Also please explain me the color code of other also.
Can GNOME Color be used to alter this change directory color in Ambiance theme? I'd rather have white.
View 4 Replies View RelatedI am using the screen app, and have set bce to on, and issued the following commands to set my background and foreground color: tput setab 4; clear; tput setaf 7; clear;
This temporarily sets everything properly on my screen. However, when I issue any commands that change or set their own background color (for example, when I issue an "ls" command with colorized output), the background color gets lost for any new output and I have to reissue the commands listed above in order to retrieve my background color.Ideally I'd like to keep my background color when issuing these commands, as it serves as a good way to remind me of what environment I am currently issuing commands in.
Is there any way to specify a color of letters in the file name?For example "my filename 001.txt".Is it possible in Nautilus?
View 1 Replies View RelatedWhen Debian 6 (amd 64, testing) is loaded, before desktop appears, for a while, the screen is black and three strange green rows appear. Then, all is ok and I can see a normale desktop and start to use Debian. So, an error in video config could be possible. Linked to this fact (I think) , there is the impossibility to modify the resolution screen (that is fixed to 1024x768) and the refresh frequency. I've tried to find "xorg.conf" in order to modify it like various guides suggest me, but this file is not present.
View 1 Replies View Related
