Server :: Setup Bind9 On Ubuntu Server 32-bit?
Jun 10, 2011I have worked with servers before now, but not DNS nameservers and I would like help setting up Bind9 on my Ubuntu 11.04 Server.
View 7 Replies
ADVERTISEMENT
Server :: Bind9 - Setup To Get IP Address To Redirect To Domain
Oct 31, 2010Location and syntax of named.conf in Ubuntu's version of BIND 9. I already have an HTTP server (in the form of Apache) along with forum software set up on my Acer netbook. However, the only way I can access the forum software is if I type in my IP address. How do I set up my named.conf to get the IP address to redirect to a domain? I already have my resolv.conf configured to allocate a domain to the IP address, but testing the ping of the site returns a "No such domain" error.
View 1 Replies View RelatedDebian Configuration :: Setup A Bind9 Server For Home Network?
Mar 4, 2011I'm trying to set up a bind9 server for my home network, I have all my IPs set to 10.0.0.X. I would like the forward and reverse to be simply "machinename", not "machinename.domain.com", as I don't want to type a domain everytime.
In my named.conf
zone "net.local" in {
type master;
file "/etc/bind/net.local.ns";
allow-update { none; };
[Code]...
Server :: Insert IP Address In Configuring DNS Server Using Bind9?
Jul 10, 2010especially to ubuntu server 8.04 because it doesnt use a GUI. Now my question is on how to insert IP address in configuring DNS server using bind9. Actually i'm using this guideBut i m not sure on how to insert IP addresses on the primary master and secondary master. Should I insert the Ip address that i found when i type ifconfig ? or Should I assign a new IP address.I have set up a webserver, DNS server, File server and mail server on a virtual box. For now, at first, im working with the DNS server or should I work with the web server first?what should I do?
View 1 Replies View RelatedServer :: Set Up A Domain With Bind9?
Jul 9, 2010I've tried reading several tutorials on setting up a domain name with bind9, but I've never managed to get one working.
View 7 Replies View RelatedGeneral :: BIND9 For Local Web Server?
Jun 10, 2011I have a web server on my local network with a couple domains facing the internet. When I visit these domains from within the network I'm directed to my routers configuration page due to hairpin NAT.
So I installed BIND9 on the server and set up my forwarders to Google DNS to act as a Caching Nameserver. Then I set my routers DNS primary and secondary nameservers to the IP of the local BIND server. Everything is working great.
Now I need help configuring BIND so that the domains hosted on the web server within the network are routed to the web server and not the routers configuration page.
Server :: BIND9 Conf And Zone Files?
Sep 20, 2010The thing is, I've created a new local zone here (called "local.lan"), and, aparently, it is working fine, and DHCP3-SERVER is updating DNS info through the controls.But sometimes I get some strange answers from the server, like when I do the "arp" command in one of the clients, and get the server's hostname "mixed" with it's own reverse, like this: "dns.local.lan.2.168. | ether | 00:02:1e:f5:61:74 | C | eth0". Other thing is that sometimes my DNS don't update when a computer "enters" the lan. In the /var/log/syslog the DHCPOFFER appears, but the information about the DNS update isn't there.So, I would like to show you my named.conf file and my local zone db file, and get some feedback from you (what would you change... what is wrong...).
# ------------------- #
* named.conf:
# ------------------- #
[code]....
Server :: Bind9 Log Full Of Localhost Queries?
Feb 24, 2011I have my bind9 DNS server running on Ubuntu with logging on. What's bothering me is that I have log full of localhost queries instead of from IP of the computer which actually asked.DNS queries log:/var/log/named.queries.log
Code:
24-Feb-2011 16:01:19.413 client 127.0.0.1#38022: query: clients4.google.com IN A + (127.0.0.1)
[code]....
Server :: Bind9 - SERVFAIL On Some Internal Domains Not Others
Jul 24, 2011I'm running bind9 on Debian 6. I have a primary domain, 44kg.net, fully configured and working dynamically (the server also runs DHCPd and updates the DNS records properly).
[Code]....
To access my externally-facing website, which has a blog and a forum which are keyed to the external domain, I set up the domains in bind so they would resolve to the server's internal IP. This worked great for a few months, then inexplicably ceased working. I didn't touch anything, but it coincided with our router dropping its VLANs. I've moved the server to a different location and it's still not working properly. Whenever I try to lookup the external domains, I get SERVFAILs. This is annoying because the internal domain is fully working and I copied the basic settings.
[Code]....
Server :: Chrooting Attempt Of BIND9 Failed?
Jun 18, 2011I followed blindly this how to : [URl].. out of laziness and then for some reason bind9 didn't want to start. So I tried to apt-get remove it, but when I re-install it, it failed because
Code:
chgrp: cannot access `/etc/bind/named.conf*': No such file or directory
so I assume the chrooting stuff I did is in the way, but I know very little about chrooting and permissions ... how can I undo the following things I did :
Code:
/etc/init.d/bind9 stop
[Code]...
Ubuntu Servers :: 9.10 - Using Bind9 As DNS Server On LAN - Does Not Seem To Translate Its Own Hostname Correctly
Sep 8, 2010Im using bind9 as DNS server on my LAN, but it does not seem to translate its own hostname correctly for some reason. Other hosts is translated correctly, the problem only seems to apply to the DNS host itself. if i "ping <server_hostname>" from the server, it translates correctly. But if i "ping <server_hostname>" from the client it only says "unknown host" The client has the correct DNS-server assigned. How can i start troubleshooting this?
[Code]...
Server :: Bind9 Stop Working When Installed Postfix On Ubuntu 9.10?
Feb 28, 2010I have a Ubuntu server running in my house.Server name UshaMain PC name HomeLaptop 1 Named BooLaptop 2 Names Bobevery one is running Ubuntu 9.10The server is running Bind9 and Samba and is working from any other PC i can type ping usha and it will give me teh ip address of the server.This has been working for 4 months now.I just installed PostFix and nowthe only PC that is working with i ping the name USHA "server name " Is the server.The other three pc come back with the IP address of the domain for USHA.I have removed the Postfix from the server but the DNS is still not working for the other pc on the network.Ho do I get Bind working again form the rest of the PC.
View 10 Replies View RelatedServer :: Setup RAID 1 On CentOS 5 Server For A Zimbra Email Server
Feb 7, 2011I'm trying to setup RAID 1 on a CentOS 5 server for a zimbra email server.I get a partion schema error. Can I do this?The server is a HP Proliant ML150 G3 server with two 80GB HDD.
View 1 Replies View RelatedServer :: Unable To Setup A NIS Server Setup On CentOS System
Jan 19, 2010We are trying to set up a NIS server on a CentOS system. We need to have a NIS server which can provide NIS authentication to a couple of clients. We are practically new to all this stuff.
Just googled to find some ideas about installing ypserv and ypbind and portmapper. We did all that and also started them successfully. But now the clients are not able to join to the NIS domain . The error log states "YP_DOMAIN NOT BOUND".
I guess we have not entered the /etc/yp.conf, /etc/hosts files properly. Please let us know the detailed steps to setup a NIS server .
Also, please let us know what entries should go into the different /etc/<file_names>? What is meant by HOSTNAME in the /etc/hosts file?
Is there any other files which need to be changed? Are we missing any steps?
Also to add-on, while executing the ypinit command we faced the following error:
At this point, we have to construct a list of the hosts which will run NIS servers. localhost.localdomain is in the list of NIS server hosts. Please cont inue to add the names for the other hosts, one per line. When you are done with the list, type a <control D>. next host to add: localhost.localdomain next host to add:
The current list of NIS servers looks like this:
Is this correct? [y/n: y] y
Error running Makefile.
Server :: Bind9 Config Files: Leading Whitespace Requirements?
Apr 19, 2011Is leading whitespace significant in bind9 config files? This reverse lookup file (/var/chroot/bind9/etc/bind/zones/rev.168.168.192.in-addr.arpa) did not work; /var/log/messages had "zone 168.168.192.in-addr.arpa/IN: has no NS records".Inserting 3 spaces before IN in the NS line fixed it:
Code:
; IP Address-to-Host DNS Pointers for the 192.168.168.0 subnet
@ IN SOA CW8vDS.localdomain. hostmaster.localdomain. (
2011041901 ; serial
8H ; refresh
[code]...
Reading the man pages and netsearching, I did not find anything about indentation requirements except for "This is usually indented for readability, but the indents are required syntactically" here.Although the above file works, named-checkconf reports an error in it:
Code:
root@CW8vDS:/var/chroot/bind9/etc/bind/zones# named-checkconf rev.168.168.192.in-addr.arpa
rev.168.168.192.in-addr.arpa:1: syntax error near ';'
but named initialisation does not log any errors or warnings in /var/log/messages when processing this file except "/etc/bind/zones/rev.168.168.192.in-addr.arpa:2: no TTL specified; using SOA MINTTL instead".
CentOS 5 Server :: Cannot Get Bind9 Internal View Served To Connecting Vpn Client.
Sep 25, 2010I have a white slate centos 5.5 installation on a virtual box at Media Temple (one of their new VE servers). I am trying to create a development environment where I can have Bind9 serve up one set of zone files to me and other developers on the internal network and another set of zone files to external requests (ie... using the views feature). I would like to be able to develop for sites for which the dns is not yet pointed at my server. The network is created by having the VE server be an OpenVPN server, and connecting my client box to the server (my mac - 10.8.0.6 / my ve server 10.8.0.1).
I have the connections working fine, I have also been able to route all network traffic from my mac through the vpn to the server. For some reason, I cannot get the DNS server on the ve server to serve me an internal view zone file. When my vpn is on, I cannot ping or navigate to any web pages from my mac. I think this is because my ve server is not setup as a dhcp server and the ip tables are not setup to allow all internal requests to use the server to go get web pages.
I cannot view-ping anything else from my mac/client when on the vpn, I can successfully ping any website my ve is authoritative for. This tells me that my ping is obviously going over the vpn, and thus an internal request, but the external zone file is still served up. The following is my named config.
acl "lan_hosts" {
10.8.0.0/24;
127.0.0.1;
};
[code]....
General :: Setup A SMS Server, Appropriate Distribution To Setup A SMS Server?
Oct 22, 2010How to setup a SMS server using Linux, also want to know the appropriate Linux distribution to setup a SMS server.
View 2 Replies View RelatedNetworking :: BIND9 Fails With Specific Setup
Apr 3, 2010when i try to set up bind9 to resolve the top level of the name it cant do it. for current sake of arguement i have 4 servers on the network
192.168.0.200 diana.undernets.lan
192.168.0.201 jen.undernets.lan
192.168.0.202 amanda.undernets.lan
192.168.0.203 alex.undernets.lan
those are the IP addresses of the servers and their respective hostnames
so if i send a request for anything to just undernets.lan it will fail because there is no record for that. so i added this to the bottom of the zone record
Code:
IN CNAME amanda
thinking that a blank would refer to the top of the zone
here is my named.conf.local which is called in my named.conf
Code:
zone "undernets.lan" {
type master;
file "/etc/bind/undernets.db";
};
zone "0.168.192.in-addr.arpa" {
[Code]....
i want to be able to lookup undernets.lan and it give me the IP address of amanda.undernets.lan
Ubuntu :: Web Server - Setup Model And Need To Give Computer Some Capability To Act As A Server
May 19, 2010I want to set up moodle and need to give my computer some capability to act as a server. I am following the steps at [URL] although my question is not really related to moodle. Here is the problem: setting everything up to make my computer accessible from outside has worked so far. I got myself a static IP address using a dynamic dns server and can ssh into my computer from any other computer connected to the www. So,
[Code]....
General :: Setup Dedicated Server Using Ubuntu Server Or Equivalent Opensource OS?
Jan 16, 2010How to setup Dedicated Server for Web Hosting using Ubuntu Server or equivalent opensource Operating System? And how to make secured my Dedicated Server on public?
View 1 Replies View RelatedServer :: Server Setup Using Ubuntu For SSH Account Hosting For Socks Proxy?
Mar 21, 2010I have a few friends that have seen me bypass firewalls with a socks proxy (SSH). I explained on how it works and how secure it is for browsing the Internet and checking your email in public places. I had at least 6 asked me if I could set up an account on my server for them and they would pay me! Now what I wanted to know was how I can set this up in a server and website where they can register an account and pay me through PayPal! I don't need help setting up the site! Just on how to set up the server to automate this. What tools are needed (ex. ISPConfig, jailkit.... stuff like that?) I don't mind doing this manually but if I get more people that would like this I don't really want to do every single one.
View 1 Replies View RelatedUbuntu Servers :: Setup A Dedicated Web Server With Server 10.10 ?
Nov 24, 2010After installation Ubuntu Server 10.10 I don't know what to do next to access to the Internet.
View 9 Replies View RelatedUbuntu Networking :: Setup A Server 10.04 Lts As File Server?
Apr 3, 2011I set up a ubuntu server 10.04 lts as file server in a network filled with xp, win 2003 and win 2008.
I noticed that if from any bill's SO machine i copy a file (for example a vob file of 1gb, or a lot of doc and pdf files) in the samba server, while the copy is in progress if in another windows I browse other folders shared in Samba, the copy process stops and say ' the name in the network is no more available( or something like this). It seems that samba pay attention on the fact that a user is browsing the share and doing so it seems that Samba forget that in one of its share there was a copy in progress, very annoing. A file server cannot do that, in this way is useless.
Server :: Setup An Ssh Server That Doesn't Require A Username,password Or Cert To Login?
Jun 22, 2010Is it possible to somehow setup an ssh server that doesn't require a username,password or cert to login?I wish to provide shell access to a console program, which will prompt for a username and password.Encryption is essential though, and users must not be able to snoop in on each other
View 9 Replies View RelatedProgramming :: Java Servlets: Setup The Server Side Configuration On Fedora Web Server?
Jan 4, 2010If you hadn't guessed it from my last 3000(ish) java-related posts, I'm a Java n00b writing a Java Applet for a work project. I got to the part was I was about to write the applet code that would send HTTP requests to my CGI scripts. But I read some paragraphs in a book praising Java servlets as better that CGI because they are easier to use and give much better performance server side. My server load isn't very big, though, and I was wondering if it would be worth taking the time to learn about Java servlets and how to set up the server side configuration on my Fedora web server.
View 3 Replies View RelatedOpenSUSE :: FIrewall Setup / Client Computer Cannot See NFS Server When Scanning For Server - OSE 11.2?
Apr 21, 2010I have a small home-office network. On that network I have two linux computers, one is a client the other a server.
On the server I have NFS Server setup and mount some NFS exports on the client computer.
On the server I have the firewall on and here it becomes a little tricky.
Since both the server and the client connect to the router the interface (eth1) is theoretically both an internal & external zone.
The router is commercial grade and therefore has a good firewall on it which is also setup. Therefore the firewall on the server is really more of a backup than a necessity. But that's fine, and by having the server's firewall on 'fail2ban' is able to work which I like to have working so I don't want to just turn off the server firewall even though I have good security from the router.
However, when I turn on the server's firewall, the client computer cannot see the NFS server when scanning for server -- done by: clicking on "Choose" next to "NFS Server Hostname" when adding an NFS share in the NFS Client in YaST. Clearly something is being blocked even though I have both "NFS Client" and "NFS Server Service" allowed in the server firewall. The Firewall config. files for these are below.
The Firewall configuration is pretty much "out of the box". That is I have the services I need opened up for the external zone, the other zones are left at their default which means the internal zone, although not used (i.e.: attached to any interface), is completely open.
The perfect solution I guess would be to setup my client computer to connect through a different NIC (perhaps eth0), make that the "Internal Zone" and therefore allow all traffic through to it while still blocking the server from the external zone. However, I cannot make that physical change to my network for now so I am looking for an in between (non-perfect) solution.
In this case I am guessing that means opening up extra NFS ports to the external zone so I have full NFS functionality. I don't mind this because like I said, the router firewall is the main line of defense anyway.
So, given all of the above could someone tell me what I would need to additionally open up in the server firewall to make the NFS server detection work on the client while the firewall was on. Or, if you have a cleverer/better solution without me changing my physical network that would be great.
Hopefully I have written this in enough detail and clearly enough so that all the parameters are clear but if not, feel free to ask me what you like and I'll try to make it clear.
Code:
## Description: Firewall Configuration for NFS kernel server.
#
# Only the variables TCP, UDP, RPC, IP and BROADCAST are allowed.
# More may be supported in the future.
code....
OpenSUSE Network :: Mulit Server Setup \ Server Machine Has No Internet?
Mar 27, 2010I want to set up the following server in open suse:dhcpopenldapnfs (to allow users to mount their home directories from the serverI started off with the openldap server. I configured it with dc=localdomain,dc=local as its domain. As the server machine has no internet. Though when I go to add a .ldif file with the following command
Code:
ldapadd -x -D 'cn=Administrator,dc=localdomain,dc=local' -f /home/base.ldif -W
It returns this
[code]....
General :: Setup Remote Access Server On Red Hat Enterprise Server Release 5.1?
Aug 30, 2009how i have a machine installed Red Hat Enterprise Linux Server release 5.1 with 2 modem (usb & com port) still i want to configure RAS server so some pple able to connect my server and send me some files.
View 4 Replies View RelatedServer :: Setup A VPN Server At Work For Resource Sharing - Connect Keep Failing
Aug 29, 2010I need to setup a Linux VPN server at work for resources' sharing, I currently have a server running CentOS 5.4, and tried endless tutorials on the web, but to no avail, and can't find where the logs are kept for the VPN server to check where the error is. But all my attempts to try to connect keep failing.
View 9 Replies View RelatedGeneral :: Setup Server To Automatically Synchronize Its Server Clocks?
Oct 5, 2009How can I setup my Linux server to automatically synchronize its server clocks? We need to ensure our server clocks are set to the correct time always.
View 2 Replies View Related