OpenSUSE Hardware :: Logitech Marble Mouse USB Scrollwheel Emulation On 11.2?
Jan 7, 2010
After upgrading from OS11.1 to 11.2 I am annoyed by the fact that no configuration options exist any more to customize for my mouse. This is a 2-button trackball very ergonomic for people. that are prone to have RSI problems like me, a real solution.
Before in 11.1 I could use Yast to set up X that it would emulate a scrollwheel with the right button. Unfortunately now with 11.2 all has to be recognised automatically and they simply threw out the mouse configuration in Yast, leaving us with some useless console mouse configuration. Not every upgrade means an improvement, which seems very much like ....
Could somebody help me or give me pointers what is the procedure to recover this emulated scrollwheel functionality? I know it has to do with xorg.conf, but I don't have that file and without this good start it will be difficult for me to get anywhere. How is this file re-created?
View 2 Replies
ADVERTISEMENT
Jul 20, 2011
I have a question about making this device working properly on Fedora 15.
On Ubuntu worked when adding to /etc/X11/xorg.conf this section:
But making this on Fedora don't allow to boot at all.
Here is my xorg.conf on Fedora 15 now(which is default):
How do I have to change this file?
View 6 Replies
View Related
Sep 6, 2010
I Have Fedora 12 and use the Logitech Marble mouse.
This mouse has no scroll wheel, instead it has two buttons one to scroll up and another to scroll down.
Instead of the usual scrolling, the buttons are acting as if I had clicked the back or forward buttons on the browser.
How can I map the buttons to function as intended?
View 1 Replies
View Related
Oct 12, 2010
I have 10.10 up and running, and am making those little "adjustments" that are special to me. I am stuck with Marble Mouse scrolling (again). I have all the old code from 10.04.
/
etc/hal/fdi/policy/marblemouse.fdi
/usr/lib/X11/xorg.conf.d/20-marblemouse.conf
But no scrolling.All the articles in the Forum are old.Something must have changed in 10.10.Anyone know what and how to get back to scrolling the way my fingers automatically work?
Copying /usr/lib/X11/xorg.conf.d/20-marblemouse.conf to /etc/X11/xorg.conf
restored vertical and horizontal scrolling.
This year for 11.04 I had to copy xorg.conf to /usr/share/X11/xorg.conf.d/50-marblemouse.conf. Every Ubuntu upgrade
is a challenge!
View 1 Replies
View Related
Apr 14, 2010
I have a Logitech VX Revolution, and I would like to change the "search/find" button to be used to middle click as opposed what it currently does, opening a new google tab in firefox. The mouse settings in System Settings does not have a tab for editing what the buttons do. (I thought there should be a Logitech tab, but I guess that is for USB only)
openSUSE 11.2 KDE 4.3.5
View 1 Replies
View Related
Dec 31, 2009
I am trying to get the forward and back buttons on my Logitech Surface mouse working in openSUSE 11.2 running as a guest in VMware Workstation 7 on a Win7 x64 Pro host. I have read many places about editing the xorg.conf file and have done so successfully under Ubuntu in the past. I have successfully installed VMware Tools and everything is working as expected except the side buttons on the mouse. I have no current xorg.conf file
View 5 Replies
View Related
Mar 15, 2011
i would like a combination of left and right mouse clicks to get me the same effect as the middle mouse does. when i first used the middle mouse button this stopped happening
View 5 Replies
View Related
Jul 13, 2010
Is there any USB mouse battery indicators for Ubuntu that can tell me the battery level of my Logitech USB mouse? (something like a laptop battery one) I want to add it the panel.
View 6 Replies
View Related
Aug 4, 2010
My goal is to be able to use my gamepad as a normal mouse, and also have some of the keys configured to open certain programs or do other things. Does anyone have any advice on what I need to install or if this is possible?
View 1 Replies
View Related
Feb 23, 2010
i am trying to use my logitech gamepad as a mouse using js2mouse. It is not working.
i am running suse 11.2
I have downloaded and installed js2mouse with no errors. when i run it i get:
# js2mouse
Number of axes : 6
Number of buttons : 12
Driver version : 131328
Joystick name : Logitech Logitech Dual Action
[Code].....
i dont get any errors form the terminal, but it does not work.
View 1 Replies
View Related
Dec 22, 2010
About 5 years ago I bought a Logitech wireless keyboard. I want to add a wireless mouse now. Logitech has no docs on its website for the keyboard or receiver. Does anyone know how to figure out whether any mouse I buy now will be compatible with my old receiver? I know that all wireless mice come with receivers, but I have limited USB ports.
View 3 Replies
View Related
Nov 17, 2015
I use a set of keyboard + mouse Logitech MK330. So, they are wireless in five minutes of inactivity have to sleep. But sleep only the keyboard. The mouse does not fall asleep. On distro Ubuntu and Windows goes into standby mode, both devices. How can I fix it to Debian?
During installation Debian distro, mouse goes to sleep, but on the installed system will not go into standby mode.
View 0 Replies
View Related
Sep 30, 2009
I just got the logitech M555b BT mouse for my pavilion dv6500. how to get it working.
View 2 Replies
View Related
Apr 21, 2010
I'm using the Logitech MX1100 mouse which has a quite a few buttons. (10) I would like to use 2 of them for volume control (as I do for Windows) but have no idea how to in ubuntu 9.10. Is there any way I could map the buttons to control volume? I'm a minor noob so keep it simple.
View 9 Replies
View Related
May 2, 2010
I've just upgraded from karmic to 10.04. After rebooting my system everything seems to work fine except my mouse and keyboard are not working.
since i have a report due for tomorrow and now i have no way of getting in to the system.
View 9 Replies
View Related
Sep 25, 2010
I need to download the driver so that I can get the buttons to work on the mouse. I couldn't find any driver for ubuntu. What can I do?
View 9 Replies
View Related
Aug 5, 2011
I just bought a usb logitech LS1 laser mouse, plugged it in restarted ubuntu 10.10 and its not working.
Where can i change the mouse?
View 1 Replies
View Related
Apr 27, 2010
I just purchased this mouse today. The box brags that one can insert the include AA battery, put the little remote in a USB port, turn the mouse, on, and away you go.
However, it doesn't work. I've gone through the whole troubleshooting guide, which generally consists of silly questions such as "Is the mouse on?"
My previous mouse was a logitech, but it was not wireless. It worked fine. Are there any restricted extras in order to get this beauty up and running? Or should I return it and invest in a more Linux-friendly mouse?
View 1 Replies
View Related
Feb 21, 2011
the Squeeze uprgade I also lost the middle mouse functionaly of my Logitech Marble Mouse. I do not remember how I set it up to be honest. I am not sure if it was by default middle was mouse was "pressing 2 buttons on eachside at the same time" or I did set up manually using Xmod or similar tool. I might have even set up in the hal settings. The reason I do not remember exactly is that I used multiple tuts and places to set this up long time ago and now that the functionality is gone I am kind of confused about how to go ahead about it.
View 1 Replies
View Related
Sep 22, 2013
I have a couple of Logitech wireless mice (M325) with USB Unifying receivers, one for a couple of netbooks (Asus & HP) and one for my old desktop. These have been working very nicely
under 32 bit OSs :-
Windows XP
Debian testing (Wheezy & Jessie)
I now have a new 64 bit desktop (Intel i5) and the Logitech mouse
DOES work with :-
The Bios
Windows 7
But it does NOT work with :-
Debian Jessie
I have found an old mechanical Sun 3 button mouse (USB), which has got me
working to some extent, but does remind me why I got an optical wireless mouse!
My old 32 bit desktop reports :-
Code: Select all$ uname -a
Linux copper 3.10-2-686-pae #1 SMP Debian 3.10.7-1 (2013-08-17) i686 GNU/Linux
Code: Select all$ lsmod | grep hid
hid_logitech_dj 13054 0
usbhid 36040 0
hid 64702 2 usbhid,hid_logitech_dj
usbcore 110348 4 uhci_hcd,ehci_hcd,ehci_pci,usbhid
[Code]....
I need to get the comparative info off the new desktop, but I am currently hampered by the old mouse and the bug, whereby when I asked for the LXDE desktop I also got Gnome installed, and Lightdm ignores my request to start LXDE and dumps me in Gnome!!
The main differences that I have found was in the modules where the 32 bit one uses uhci_hcd, while the 64 bit one uses xhci_hcd. The dmesg section is like the above, finding the Unifying device, but is missing the last line where djdevice finds the mouse..
View 14 Replies
View Related
Mar 21, 2010
i'm using a logitech dinovo keyboard/mouse and was trying to figure out if the device is still in boot mode. I don't see the usb hub listed when i hciconfig and i although the udev rules appear to hid2hci, i cant seem to figure out how in the heck i could be paired when i've never went through the process.. lsusb also shows "boot interface subclass" which im guessing means its in bootmode? Im obviously concerned about this because bootmode isnt encrypted.
[Code]....
View 2 Replies
View Related
Jan 17, 2010
It works under Windoze but in Linux the integrated mouse doesn't work. Whilst it's forced me to learn some keyboard shortcuts, the mouse would help a lot.
This is my media PC. I run currently run Mandriva 2008 & use Kafiene to watch/record etc TV.
View 5 Replies
View Related
Nov 2, 2009
I got myself a shiny M305 Logitech mouse for my laptop. It comes with a littlee USB wireless dongle. When I plug in the dongle, DMESG shows me that the system notices the dongle:
usb 5-1: USB disconnect, address 6
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
usb 5-1: new low speed USB device using uhci_hcd and address 7
usb 5-1: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /class/input/input15
[Code]...
View 4 Replies
View Related
Aug 23, 2011
i cant get this right for some reason. i switched from ubuntu to fedora. in ubuntu i had the same issue with the touchpad, but there i found a fix which worked with ubuntu, but not with fedora.[URL]... the problem in fedora is that i dont have any psmouse.ko module in /lib/modules/2.6.39.4/kernel/drivers/input/mouse so the patch cant really be applied so i get an error, saying there is no psmouse
i found a fix, but since my knowledge with linux is limited i didnt get it right. "I spent some time trying to get this working (and one will find other threads here, on the Fedora list, etc, where I was trying to get help), but the problem, in the end, is that Fedora doesn't install the PS/2 mouse driver as a module, but builds it into the kernel. So the solution was to recompile the kernel using the changed files from System 76's repo.
This is not nearly as difficult as it sounds. The process described in the Fedora docs, under Building a Custom Kernel, is easy enough to follow. In my case, it was even easier. I unpacked the kernel source by following the steps down through "Prepare the Kernel Source Tree" and then copied the source for the new "module" into drivers/input/mouse, replacing just the elantech.h and elantech.c files. I don't really care about getting an RPM, so I just built the kernel"[URL]..
View 1 Replies
View Related
Apr 13, 2015
Something within the group of updates which I installed last week (April 6 to 10 or so) has impaired the functionality of my mouse's scroll wheel. It will no longer scroll pages on Iceweasel, Midori, some PDF readers, PCManFM, and others. The "up arrow" and "down arrow" seem also to have been compromised. I suspect the culprit might be libx11. This is an amd64 system with the nvidia video driver.
View 2 Replies
View Related
Sep 2, 2010
I frequently find myself accidentally switching desktops when I use the mouse scrollwheel, because the cursor isn't over a window at the time. I'd like to disable this behaviour, but I can't see any control for it in KDE System Settings.
View 2 Replies
View Related
Apr 15, 2010
Does anyone know of a variant on the Logitech SetPoint software (it allows more functions for Logitech keyboards and mice) for Ubuntu? Would the Windows version work in Wine? I didn't think it would because the app uses Bluetooth, and I don't know if Wine can do that.
View 2 Replies
View Related
Jan 10, 2010
I finally bought marble blast gold. a very cool game. i was able to run it on my mac perfectly fine. but now when i install in on my ubuntu machine its not doing what its supposed to. i did a ./MarbleBlastGold 1.4.1.sh.bin after doing the sudo -i command. it installs just fine. but when i go to run the game, i cant find it in the menus. thats ok, i have commend line experience. so i cd to the install folder, and run a ./marbleblastgold, and this is the error i get. so what can i do, and what does this mean? good thing i bought it for all my computers. one copy of course.
View 2 Replies
View Related
Dec 22, 2009
I'd like to get the scroll wheel's left and right tilting to work in firefox (go back and forward one page). A lot of the forums suggest ways to do this with xorg.conf, but I see that it's been removed in 11.2. The only mouse support in Yast is this "text console mouse model" thing- what is that?? At any rate, it doesn't have Logitech LX or MX series mice in its list.Any suggestions for getting this to work? Am I going to have to create an xorg.conf file, and what will break if I do? Any ideas what the direction is for Logitech mice in openSUSE? It sure would be great to have better support for mice in this distro
View 1 Replies
View Related
Nov 27, 2009
I was having some issues with my old webcam and decided to just get a new one since my old cam was just that, old. Anyway, I went with a Logitech Orbit AF and it works as far as video goes but I can not figure out how to change the pan/tilt. I did not expect all the options of the cam to work but I figured I would at least be able to move the cam up since it is aiming at its lowest setting, which when using is around my chest. I have been searching around trying to find something that tells me what I need to do. From what I read, I think I need to change the settings of some functions called v4L2UpDownPan() and v4L2UpDownTilt() in luvcview, which I guess are in a file called v4l2uvc.c but I can not find that file. Is this what I need to do? Is that the file I need to change and if so, where is it? I just want to set it and leave it.
View 2 Replies
View Related
