General :: 2nd HDD Is Not Mounted After Ubuntu Installation?
Apr 20, 2010
I recently formatted my hard drive and installed Ubuntu and I have the following problem: My laptop has to inbuilt hard drives, one which I use for the operating system and one which I use for storage. Up until 3 days ago, I had Windows XP and Ubuntu 8.04 installed on one of the hard drives, but decided to switch fully to Ubuntu 9 because Windows was giving me far too many issues. So I downloaded the ISO, burned it on CD and then installed. I formatted (as far as I could tell) only one drive but the other one has disappeared from view ever since. I asked a more Linux savvy friend of mine for help and he only got as far as determining that the 2nd HDD is still detected but not mounted. And then he referred me here.
View 4 Replies
ADVERTISEMENT
Oct 9, 2010
I have downloaded ubuntu RC 10.10. (or, if you're reading this tomorrow, remove "rc" it wont make any difference) I would like to mount the image that I downloaded and update my ubuntu 10.09 trough upgrade manager.
Is that possible? It appears that the software sources tool only accepts cd-rom.
Or I can add it manually in the sources file?
View 7 Replies
View Related
Feb 13, 2010
Just moved to Ubuntu from XP. Whole process has gone very smoothly, but left with a small problem (i.e. it isn't actually affecting usability) that I don't seem to be able to fix and can't find on forums/internet. I also have a problem with the Floppy drive, but I've seen that problem elsewhere in the forums.
It's a dual boot system with both NTFS and Ext4 drives. All are visible and fully accessible. I decided to convert one of the NTFS drive to Ext4. That appeared to be successful and was successfully remounted as an Ext4 drive. The drive label is "Data". I did have a bit of a problem getting it remounted so that I could see/use it under my log-in as opposed to just under root. It's at this point I think that I did something to create the problem.
I now have two entries for "Data" in drop down menu for Places. The true one is shown as a standard hard drive icon, but the false one is shown as a different icon - possibly an external drive icon (note that the floppy drive is also showing as the same icon and I can't access that, but I've seen that's a problem elsewhere in the forums).
I can write and read to the true "Data" hard drive. If I click on the other false "Data" icon, I get the message "mount: /dev/sdd1 already mounted or /media/Data busy mount: according to mtab, /dev/sdd1 is already mounted on /media/Data". If unmount the true drive and try to mount the false drive, the system mounts the true drive instead. If I log into nautilus as root, neither the false data drive or the floppy appear in the left hand panel.
View 9 Replies
View Related
Feb 26, 2010
I want to install some packages to a hdd from booting a live cd
eg add something lets say gparted for example to the hdd install of ubuntu
but
while i'm booted from a live cd or if the disk has been put into another linux box
View 1 Replies
View Related
Apr 7, 2010
I use dual booting, vista ubuntu 9.10. I have just bought a new 1T external harddisk i have used it on windows to backup some files. Now I want to backup some documents in ubuntu, but the harddisk is not visible, I can't see it, ok I think the term in Linux is that it is not mounted. Is there something else one should do ?
Disk /dev/sda: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xf959a599
[Code]...
View 4 Replies
View Related
Apr 8, 2010
I tough that my computer could not mount external harddisk.Here is my mail about that subject.I use dual booting, vista ubuntu 9.10.I have just bought a new 1T external harddisk i have used it on windows to backup some files.Now I want to backup some documents in ubuntu, but the harddisk is not visible, I can't see it, ok I think the term in Linux is that it is not mounted..Disk /dev/sda: 640.1 GB, 640135028736 bytes255 heads, 63 sectors/track, 77825 cylindersUnits = cylinders of 16065 * 512 = 8225280 bytesDisk identifier: 0xf959a599
Device Boot Start End Blocks Id System
/dev/sda1 1 1176 9437184 27 Unknown
/dev/sda2 * 1176 52188 409761792 7 HPFS/NTFS
/dev/sda3 52188 77826 205930496 7 HPFS/NTFS
View 1 Replies
View Related
May 5, 2010
I'm trying to install Lucid on a computer with windows already present. When I ran trough the install procedure no drives show up at the partitioning stage. So I check some things out and it turns out that /dev/sda1 is mounted to /cdrom and I can't umount it because it says the disk is in use. I'm booting with the live-cd downloaded from ubuntu. Why is this happening? Previously with older live-cd's I always have to mount the HD manually if I wanted to access it for any reason?
View 2 Replies
View Related
May 26, 2010
I want to upgrade my ubuntu 9.10 to 10.04..i have downloaded .iso CD image of ubuntu 10.04 LTS and have mounted it using nautilus script to CD-ROM..Now i want to upgrade my ubuntu installation from that CD
View 2 Replies
View Related
Apr 30, 2011
I upgraded from 10.10 to 11.04In 10.10, Nautilus showed all my drives/partitions automatically. The same goes for 11.04, but... all the drives/partitions are also shown in the launcher.Because it gets a bit crowded on the left side, I want to get rid of those drive-icons.I can only open them, not remove them from the launcher, except my external drive (safely remove), but than it also disappears from Nautilus Is there any (easy) way to remove those drives?
View 2 Replies
View Related
Jun 3, 2010
On boot - I get the message udevd inotify_add_watch failed no such file or directory for my LVM physical volumes... volumes are mounted and appear to be usable
View 6 Replies
View Related
Dec 22, 2010
After upgrade from 10.04 to 10.10 I can't mount anymore my crypted disk image.I've an old backup of this image, but when I try to mount it, system give me same errors.
View 2 Replies
View Related
Jan 11, 2011
Before: I had 2 os's ubuntu and windows installed on my system. Recently, I decided to install ubuntu to a flash drive. All went well except grub was not installed to the flash drive, but appended the existing grub setup on my hard drive.
Now: Even if I set the default system in grub as windows, or the original ubuntu install, my system will not boot unless the usb stick is plugged in. I get message. Error: grub rescue: My ideal solution: To stop grub searching for my flashdrive before loading the boot menu, and if possible to write grub to the flash stick.
View 3 Replies
View Related
Mar 19, 2011
My old server machine running Ubuntu 6 experienced hardware failure, so I built a new machine with spare parts and decided to install 10.10. I used the 2 HDDs from the old machine and decided to use existing partitions for the 10.10 installation. I specified the existing partitions on a 250 GB PATA drive for root, /boot, /home, and swap. For some reason when I booted up 10.10 for the first time, the other HDD (750 GB SATA) was mounted as /boot. I never specified the second drive to be used for anything during the installation, so I have no idea why this happened.and how can I change the mount point for /boot? I would like the highlighted partition in the attached screenshot to be /boot. I really hope nothing on the 750 GB drive was overwritten in this whole process, because it contains all of my photo and video backup.
View 1 Replies
View Related
Nov 29, 2010
I have successfully installed debian and updated it. After few days of installation maybe around a month. I tried to install some other software from synaptic but my installation CD isn't being detected like before. What do I do? The CD can be opened etc., but its not getting mounted as /cd-rom/ which the synaptic packagemanger searches most of the time.
View 2 Replies
View Related
Aug 17, 2010
Rsnapshot also cannot see my external hard drive. But I can see/edit all the files in the windows partition and the external drive. The output of mount for those two entries is:
[Code]...
View 1 Replies
View Related
Jun 12, 2010
I selected the option to have my second hard drive automatically mounted during installation, and now I would like to undo that.
View 8 Replies
View Related
Feb 26, 2010
I run Windows Vista and Ubuntu 9.10 dual boot. Today while booting windows, it informed me that there was something wrong with my hard disk and it would perform a check, and made some fixes.
Only when I wanted to boot into ubuntu again did I realise that the disk check had corrupted my linux partition. Ubuntu's load screen shows up, but just before the login screen it says that the filesystem could not be mounted.
Is there a way I can fix this? And how do I prevent windows from doing the same in the future?
View 1 Replies
View Related
Dec 5, 2010
I am using Gnome and Squeeze. I am wondering if I have a problem of understanding, or a problem that I found with Gnome.
My configuration is with a 3 hard disk system.
disk1 (Debian)
disk2 (XP and Fedora)
Disk3 (W7 and a Data partition)
When I boot and log in, all partitions for disk2 and disk3 are mounted read-write. Only by going to command line am I able to unmount the drives with the following sequence
cd /media
umount *
umount *
I should be able to mount and umount a drive by providing or responding to a root password. But I am not given the option to present a password. My request is blocked.
I also do not want to see the drives remounted after a boot. I tried to find out how this was managed, but I was unable to discover the module and it's parameter list that controls or does this task.
View 1 Replies
View Related
Jun 16, 2009
I upgraded F10 to F11 successfully.
Then I convert the / partition filesystem by the following steps:login as root user in multi user mode read [url], and execute tune2fs -O extents,uninit_bg,dir_index /dev/mapper/VolGroup01-LogVol00 modify /etc/fstab, change the type of / to ext4
reboot
(because fsck say running it on a mounted filesystem can cause filesystem damage, so i decide to reboot to single user mode first. maybe it's a mistake here) try to boot F11 to single user mode, failed
reboot from a SystemRescueCD-1.2.0 LiveCD
run e2fsck -fpDC0 /dev/mapper/VolGroup01-LogVol00 in SystemRescueCD-1.2.0 LiveCD, no error reported
reboot
try to boot F11 normally(multi user mode), but it failed at: EXT3-fs: dm-0: couldn't mount because of unsupported optional features (40).
I tried rescue mode of Fedora-11-i386-netinst.iso after these steps above. The / partition can be found and mounted to /mnt/sysimage correctly. I can read/write files in / partition, and i can even yum new softwares in rescue mode, but it just can't be mounted when booting.
View 6 Replies
View Related
Mar 2, 2010
Recently I was trying out a boot disk I had made, and basically, I switched it off several times due to it booting the completely wrong kernel. Now, I'm getting to the stage "Checking File systems" and then comes up [Failed]. I then get a message saying Reboot required, and that it will reboot in 15 seconds, just a few seconds before it reboots I get "/dev/shm not mounted, /dev busy" or something similar.
I've booted up my sysresccd, ran "fsck.ext4 -fcv /dev/sda2" to force a check and scan for any bad blocks, it came up clean, then I rebooted and got the same error, so I copied the kernel and system.map over to /boot to make sure there's no corruption and reinstalled initscripts and util-linux-ng, rebooted, same error.Tried different kernels, I've checked fstab and menu.lst, no problems there, so I still don't get why I still get the same problem.
View 1 Replies
View Related
Feb 2, 2010
The Fat32 master HDD in my Intrepid Ibex 8.04 Ubuntu PC is mounted and stays so.
I installed a second (slave) ntfs HDD into the Ubuntu PC. Each time I turn it on, the drive needs to be mounted.
What (exact steps) do I need to do so that the slave drive stays mounted after the PC is turned off.
The goal: When the PC is turned on, I'd like the slave HDD already mounted and ready to use.
View 9 Replies
View Related
Jun 23, 2010
How do you find the device (e.g. /dev/*) for a mounted USB drive in Linux (Ubuntu 10.04)? I'm trying to format a Cruzer USB flash drive, and when I plug it in, the icon for the mounted filesystem appears on my desktop. However, when I open GParted, it doesn't list the filesystem as an option to partition.
The recommendations I've found through Google include monitoring tail -f /var/log/messages, which they claim should list the device name when the drive is mounted, but this never happens for me. I've also read that the USB drive would usually be linked to /dev/sdb, but this appears as a broken link on my filesystem. How else would I find the device?
View 3 Replies
View Related
Sep 27, 2010
This may be to specific of a scenario, but it is real.- I use an NFS mounted FS as a destination for my backups from multiple clients. - If the FS is mounted with 'noac' which in effect disables write caching, backup performance is horrible 40kb/sec.- If I remove this mount option, backup performance is fine 12mb/sec. However, because of write caching, my cpu io wait time increases (up to 40%) and performancen the entire host suffers unacceptably.My initial impression/solution is to find a way to enabling write caching e.g. do not specify 'noac' and limit OS write cache size
View 1 Replies
View Related
Jan 13, 2010
I have an NFS server running an older version of AIX that exports two disk partitions. Let's say /1 and /2I also have an NFS client running Fedora 9.I am able to NFS mount /1 and /2 from NFS server under /mnt/1 and /mnt/2 on the client.If I do a df command on the aix server,I see that /1 is 2Gb total and 1.7Gb is usedand /2 is 2Gb total and 1.4Gb is usedI see the same if I do a df command on the NFS client (Linux)Now, the confusing part is here: in the GUI of Fedora, if I go under /mnt and right click on /1 and check folder properties, it tells me that there is ~ 54 000 files (which i assume is the correct number) for a total of 5.3Gb! And for /2, properties indicate 1.2Gb. Where do these extra 3.6 Gb come from on /1...? and even the smaller difference for /2 confuses me (but this might be just the way different systems round off large numbers)?
View 1 Replies
View Related
May 9, 2011
how can i check from console where folders are mounted?
i want to be able to check what partitions certain folders are on.
View 14 Replies
View Related
Jul 15, 2010
I get this pop-up error message whenever I plug it in or try to open it via my file manager:
Quote:
Failed to mount "16G Removable Volume".
Rejected send message, 1 matched rules; type="method_call", sender=":1.81" (uid=1165 pid=4087 comm="exo-mount -n -h /org/freedesktop/Hal/devices/volum") interface="org.freedesktop.Hal.Device.Volume" member="Mount" error name="(unset)" requested_reply=0 destination="org.freedesktop.Hal" (uid=0 pid=3003 comm="/usr/sbin/hald --daemon=yes ")).
[Code].....
View 15 Replies
View Related
Apr 16, 2011
New vps with fedora 13
my fstab
none/dev/pts devptsrw00
tmpfs /dev/shm tmpfs defaults 0 0
first one works
tmpfs doesn't get mounted....
can't figure out why =
worked on fedora 10...
View 9 Replies
View Related
Mar 10, 2010
I recently installed kde using
Code:
apt-get install kubuntu-desktop
and I love it. However, in GNOME, it shows all the usb drives and cds you have in on the desktop. The kde desktop doesn't do this, and I'm wondering if there's a way to make it so. I googled around, but couldn't find anything.
View 1 Replies
View Related
Jul 6, 2010
I'm using LVM-based partitioning. I can not mount one partition. Here is some information I can provide.
Untitled-1.png
snapshot7.png
snapshot8.png
This incident happened after I try to encrypt this partition and then an error message appears. If not mistaken, it contains an error number (I forget) and a warning which reads that can not remove the LABEL on the devices.
View 1 Replies
View Related
May 26, 2011
Created partitions, some of them LVM, in a server, say A. Did the same for another server, B, but created one more LVM partition.
Installed RHEL in A, and some other applications. Made dump files for each partition of A and restored all of them them in B. No error in that process, except B wouldn't boot. Did chroot /mnt/sysimage and grub-install /dev/sda--still no good. B came to a halt with GRUB> dispalyed. <tried many things many times.. searching Googles..but w/o luck) Gave up, and restored the bootloader part using OS CD -- I say restored because now B boots ok and I can see application that I had installed in A. So far so good.
Problem: that extra LVM partition is missing! I did not knowingly overwrite it, so where did it go? Somebody is keeping it from being displayed!
Is it the grub.conf that tells the OS what to mount and what not to? If yes, problem is , grub.conf is missing in B. In A, it is in /boot/grub/. df -kh shows other partions (some of them LVM) just fine.. what is going on?
I tracked a file called menu.lst in a strange place, in /usr/share/doc/grub-0.97.. but I didn't see any entry that loads partitions.
View 1 Replies
View Related
