Fedora :: Yum Update - Keeps Hanging And Switching Mirrors During Downloads
Jul 20, 2009
Almost every other time I run yum update, I'm getting mirror problems - this is losing all my confidence in Fedora for several reasons: a) it's wasting time - what should be 1-2 minute updates are taking 5-10 minutes and often (like tonight) not even completing b) since it keeps hanging and switiching mirrors during downloads I wonder if the updates are coming thru okay c) the fact this is not being seriously addressed makes me wonder re Fedora quality. Add to that the constant and real annoying kernel errors popping up re network manager and sierra wireless (even when my sprint card is not plugged in).
View 8 Replies
ADVERTISEMENT
Aug 7, 2010
Does anyone know if the Yum fastestmirror plugin only makes decisions based on latency to pick the best host or does it measure bandwidth? On my laptop for the last few weeks I've been getting super slow yum updates (3.5kB/sec), when I force it to use the baseurl it runs as fast as I'd expect (160+KB/sec).
So the fastestmirror plugin doesn't seem to work unless maybe it's measuring latency as fast but the actual download speed is slow. If so, fastestmirror plugin should really take both into account.
View 2 Replies
View Related
Feb 24, 2011
I'm on the Fedora 14. I'm getting troubles. I can't do YUM UPDATE! See the attached image. It's trying to search for mirrors forever. Impossible how awful the performance. What shall I do? My project development has been paused for a moment.
View 9 Replies
View Related
Feb 6, 2011
there is a problm with my mirrors..i cant even download or update anything .When i write yum install vlc
it tries to download and says
trying another mirror
again trying another mirror
Similarly it tries different mirror and stopped.
View 8 Replies
View Related
Apr 21, 2009
Recently i was able to setup a server which can work as a local yum repocitory in my envornment.However when i tried to update the packages in my repocitory using rsync from mirrors.kernel.org its giving a timeout error. The error i am getting is "rsync error: error in socket IO (code 10) at clientserver.c(107) [receiver=2.6.8]" I am having repocitory for centos 4.4 and 5.2(both 32 and 64 bit versions)
View 2 Replies
View Related
Jun 17, 2011
During a routine update of my desktop (ubuntu 10.04), the update is hanging at "unpacking replacement compiz-gnome". I was wondering if it is safe to kill the update, and, if not, what else I could do. This has been hanging there for about 2hrs now, so its not just taking its time.
View 1 Replies
View Related
Mar 2, 2010
I have restored it and populated it with most of what I want. But cannot find the icon for downloading updates (downwards pointing arrow).
View 2 Replies
View Related
Sep 20, 2010
I'm trying to run Audacity sound editor, which evidently is already installed according to YaST2, but wont show up 'till i run OpenSuse updates. However I don't know anything about these pid files that are locking sys management and obstructing me.
View 1 Replies
View Related
Dec 10, 2009
I am using ubuntu 8.04.When I install software from internet then files are downloaded to /var/cache/apt/archives so i keep those debian files in safe place so that I can install that software on another stand-alone computer.
MY question: When we run 'apt-get update' for first time after fresh install it downloads some files. Can i store those files & point to them for a networkless computer which has no internet ? If this is possible it will allow me to 'apt-get check' on stand-alone computer to see if any package is not proper.
View 13 Replies
View Related
Jun 3, 2010
I have some pending upgrades, one of which includes kernel 2.6.32-22 but whenever the upgrade gets to running the update-grub command, it gets stuck on "Found memtest86+..." Here's the actual output...
[Code].....
It's been hanging like this for hours today, preventing me from getting any of the pending upgrades. I've cancelled it several times, deleted the dpkg lock files and tried it again only to have it hang all over again.
View 9 Replies
View Related
Apr 21, 2010
When I try and use yum as a normal user i get: Error: failure: repodata/primary.xml.gz from adobe-linux-i386: [Errno 256] No more mirrors to try. If I do this as root it works fine. What am I missing?
View 4 Replies
View Related
Apr 5, 2011
I am having a problem with installing mysql and mysql-workbench. I installed a group of packages related to mysql on my system and it seemed to work fine. Due to an error in my setup, I decided to uninstall all the mysql packages and start from scratch. On my second try, I was able to load all he packages except mysql-workbench
I get the following error from the Add/Remove software application. workbench-5.2.30-1.fc14.i686: failure: mysql-workbench-5.2.30-1.fc14.i686.rpm from updates: [Errno 256] No more mirrors to try. why I can not get the package again to install?
View 3 Replies
View Related
Jul 14, 2011
In Fedora 15 fresh installation, yum update does not work. During package download, it throws the message "no mirrors to try". Yum repolist is below:
Loaded plugins: langpacks, presto, refresh-packagekit
updates/metalink | 7.1 kB 00:00
updates | 4.7 kB 00:00
updates/primary_db | 2.9 MB 00:03
updates/group | 1.8 MB 00:02
virtualbox | 951 B 00:00
virtualbox/primary | 2.0 kB 00:00
virtualbox 2/2
repo id repo name status
updates Fedora 15 - x86_64 - Updates 4,108
virtualbox Fedora 15 - x86_64 - VirtualBox 2
repolist: 4,110
View 1 Replies
View Related
Jan 22, 2011
How to be sure that my yum is working? I think its not working as: if I enter on terminal I find the error: Code: yum install yumex many lines saying trying other mirror and then at the last line: Code: python-enum-0.4.3-6.fc12.noarch: failure: Packages/python-enum-0.4.3-6.fc12.noarch.rpm from fedora: [Errno 256] No more mirrors to try.
View 2 Replies
View Related
Aug 4, 2009
Seven times I was downloading the fedora11 disc1 i386 iso and the sha256 checksum was bad. When I try ftp.belnet.be mirror I can get the correct checksum. I understand the copy process between mirrors probably was errors. Becarefull friends. This bad iso aborts the installation process.
View 4 Replies
View Related
Sep 29, 2010
My yum is not working. I need cpan in order to install a perl module net::ldap.
This is what I am see when I run the command yum install perl-CPAN
om updates:
I try running yum clear and yum update and nothing fixes the issue.
View 13 Replies
View Related
Jan 3, 2010
I am about to try Fedora 12. I noticed that most of the mirrors listed for this in lq have 2 isos. The first download listed has 4 - Live, Live 2, Live KDE, Live KDE 2. If I choose to use gnome instead of KDE, can I just burn and install the first two?
View 3 Replies
View Related
Jun 10, 2010
Fresh install of F13, just went to update and I get the following error:Code:failure: repodata-primary.sqlite.bz2 from updates: [Errno 256] No more mirrors to try.
View 7 Replies
View Related
Sep 24, 2009
I am working on Fedora core 4 with kernel verion 2.6.11.. I am running a Manager process which spawns child process. If a child process exits , the SIGCHLD signal is processed in parent process and it is forked again. When the parent process receives a SIGTERM signal it first tries to kill the child process using SIGTERM signal . if the child process dosen't get stopped then kill it using SIGKILL. Now,the Parent process sometimes gets hanged and the strace shows :
futex(0x98535e0, FUTEX_WAIT, 2, NULL <unfinished ...>
View 1 Replies
View Related
Mar 14, 2010
My Fedora setup is working great so far, and I don't really have any complaints. I installed it on a portable hard drive, connected over USB. Thing is, I installed my system with the LiveCD, and I wanted to download the full DVD for a friend because of his needs for his system. When I try to download the full DVD (whether over Firefox or Transmission), the system hangs by suddenly showing a screen with the Fedora logo in the middle and a light blue background, the same as in boot up. Also, my caps lock blinks in a consistent fashion like a metronome. The same happens whether I try to download to the portable hard drive or to a FAT32 partition on my laptop's actual hard drive. Is there any way to fix this, or can I be calmed by the fact that it just happens because it's installed on a portable hard drive? This problem isn't happening on Ubuntu (which is installed on my laptop's hard drive), where I am downloading from right now.
View 2 Replies
View Related
Jun 11, 2010
I've been having trouble with my desktop ever since I upgraded from F 11 to F 13 last night. Finally, however, I got the proper version of the nVidia drivers installed. However, it's stopped completing boot. I've edited grub at boot to get it to show the boot messages and find that the last thing it reports is success in registering the binary for Windows applications. After that, it just sits there, doing nothing. I can go to an alternate console an d log in, but that's all.
If I log in and run startx, it fails.It reports that it was unable to load the nvidia module and "no screens found." Does anybody know what I should do next?I've removed both kmod-nvidia and akmod and am going strictly with the nouveau drivers.I've booted, used Ctrl-Alt-F2 to get a console, logged in as root and run the setup program to configure X to run that way, then returned to the main console and logged in as myself. Shortly after my wallpaper shows up, and long before I have a working desktop, it goes white and stays that way. Aside from getting a different video card (The old one worked Just Fine right up until I upgraded.) what else can I do?
View 11 Replies
View Related
Jul 19, 2010
I installed adobe reader quite some time back. It was working fine. Nowadays it gets stuck up and then the screen fades out and then after some seconds it gets back to normal. What could be the problem.
View 9 Replies
View Related
Jul 19, 2011
I'm having problems booting up my Fedora 14 system. I see the Fedora splash screen (the one with the egg-like logo that colorizes as it loads); the logo fills up completely and then everything hangs - all I see is the egg logo, and nothing else is ever displayed. I also can't get to any of the ttys via the CTRL-F1 sequences.
I can boot into single user mode just fine. The install scripts all run just fine. The system itself is actually up an running, so I suspect this is either something in the KDE startup, or after init processes all of the start up scripts.
I'm assuming this isn't a startup script problem, because I see a "started XXX" message for every service in the rc.5 directory - in other words, all the startup scripts ran from rc.5.
So, how do I find out what is hanging? I'm not seeing anything in /var/log/messages, and pstree didn't tell me much about what init was doing.
I used to be able to follow inittab to see all the things it did at boot, but since inittab was stripped of everything it used to do a few releases ago, I don't know what init is doing anymore.
View 1 Replies
View Related
Aug 8, 2011
I am currently working on a project at work to do caching across a windows network (web traffic thorugh squid and windows updates with WSUS). It is proving to be an interesting learning project.This got me thinking about my home network. Currently I am running 8 Fedora Computers (with the very real possiblity of more in the forseeable future).
Oviously running "yum update" on every computer and having them download these updates directly on each computer eats a lot of bandwidth on the external link. I would like to know if there is a way to set up a proxy server (or something else for that matter) to cache yum downloads. This way when I deploy a new machine, or run updates, I can save time and bandwidth by only downloading the packages too my LAN once, instead of nearly a dozen times.
View 4 Replies
View Related
Nov 26, 2009
I have just installed Fedora12 x86 64. On booting more often than not it hangs just before completing the login screen.I will try some of the options in the wiki. In the mean time has anyone else experienced this and resolved it.The odd thing is although the keyboard is not on, (num lock light goes out as boot starts and only comes back on if it has fully booted), the mouse will move around the screen but the click has no effect.Note the same behaviour was shown on the x86 64 live cd which I needed to install to enable me to create a bootable usb stick from the x86 64 DVD.
View 4 Replies
View Related
Mar 16, 2010
When I went to start up the computer, the kernel usually hung at the same place on boot up, although sometimes it booted just fine. The default kernel is 2.6.31.9-174.fc12.x86_64. It's boot up arguments are:
Code:
kernel /vmlinuz-2.6.31.9-174.fc12.x86_64 ro root=UUID=75d16864-ba74-49ef-aaa9-0a1dd3c92254 noiswmd LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet rdblacklist=nouveau
I also have kernel 2.6.32.7-37.fc12.x86_64, 2.6.31.6-145.fc12.x86_64, 2.6.31.5-127.fc12.x86_64. I have seen the same behavior out of all four of them. Last night I ran Memtest86+ all night. It took eight passes with no memory errors. As far as hard disks go, I have two Seagate Barracuda 1.5 TB drives operating as software RAID 1 (mirroring). One of the drives does have three bad sectors. The motherboard is an Asus P6T6 WS. This morning I plugged in the GP diagnostic chip that came with it, but I'm not seeing a whole lot useful there, except that now it is just displaying "FF" non stop.
I did some poking around on the web, and it looks like "FF" is supposed to mean that the CPU isn't properly seated, which makes no sense because the system monitor software is detecting all four cores perfectly, and I have no other odd behaviors anywhere else. At this point I'm rather at a loss to understand what could be causing the difficulties. Sometimes any of the four kernels boots fine, and sometimes they don't. The funny thing is that on the blue "boot progress bar" all four kernels hang at exactly the same spot if they hang at all. After doing some more poking around, I'm relatively sure that "FF" does NOT mean that the processor isn't seated correctly. I'm going to try contacting Asus and see how far I get towards getting some good info on what the diagnostic codes mean.
View 3 Replies
View Related
Mar 17, 2011
I have Fedora 13 in a VPS. I cannot work with yum. I got this error: [Errno 256] No more mirrors to try # yum list Error: Cannot retrieve repository metadata (repomd.xml) for repository: fedora. verify its path and try again.
View 4 Replies
View Related
Feb 15, 2009
I just switched from XUBUNTU to fedora 10 and have to say I will most likely change back. Unless someone can tell me how to speed up the internet connection in fedora. I have tried wireless and wired and it doesn't matter which I use the download rate is painfully slow. With wired I get a meg every minute. It really hurts to watch the monitor.Downloads for three seconds then takes a break for eight seconds then downloads for three more seconds and this goes on and on. I have a very fast connection and am used to getting amazing unbroken streams of data at no less than 1 meg every 2 seconds. I hope this is a rectifiable situation.
View 4 Replies
View Related
Sep 21, 2010
I`m having a problem with upgrading my Fedora 11 to either Fedora 12 or Fedora 13. When i start preupgrade, it lists all packages that need to be upgraded, but then it ends with the message that none of the mirrors can be found. I`m seeing the messages in the console, and indeed all the mirrors return "HTTP Error 404: Not Found". Any idea how to change this and eventually do an upgrade?. I also downloaded the Fedora 13 DVD, and tried to upgrade that way, but it never showed me the window which must give me the option to upgrade instead of doing a fresh install. The explanation in the official website clearly shows that this window exist, but after several tries with the DVD I did not get it.
View 1 Replies
View Related
Feb 23, 2009
I am trying to install Fedora Core 10 64bit on my Desktop... i've been running FC7 on it until now.The installer continues until the Anaconda GUI, and I am able to click next on language select, then when I click to select "U. S. English" as the keyboard layout and press NEXT, the installer hangs. I ran the disk verification at the start and it passed, so can't be a corrupted installation disk.I can move to the other terminals away from the Anaconda GUI Installer, and in one
Code:
INFO: moving (1) to step welcome
INFO: moving (1) to step language
[code]....
View 5 Replies
View Related
