Fedora Installation :: Preupgrade Leftover Packages - 176 F13 Packages Remaining
Nov 17, 2010
I recently upgraded from F13 to F14 using "preupgrade". This is the first time I've used preupgrade. So far, F14 is running OK. There are some leftovers from F13 and I'm wondering if this is correct.
Q1: There are 176 F13 packages remaining. [alfrugal@localhost Documents]$ rpm -qa | grep fc13 | wc -l 176 Is this OK? FWIW, after the upgrade, I ran "package-cleanup --orphans" as recommended by the "preupgrade" page on the Fedora Project wiki.
Q2: Also, my GRUB menu was correctly updated for F14, but it still contains the three entries it had for F13. Is it normal for the preupgrade process to require the user to clean up the obsolete entries from the GRUB menu?
View 2 Replies
ADVERTISEMENT
Nov 25, 2009
I was hoping to exclude two packages from preupgrade like Firefox for instance
View 2 Replies
View Related
Apr 7, 2009
I have a system set up with Fedora 9 - the Fed10 installer choked on an older Intel video chip. I've decided to try updating to 10 in anticipation of further upgrading to 11. Reading this forum and elsewhere convinced me to try preupgrade. I started it and saw Fed10 as an available upgrade path, selected it. At that point, the system appeared to freeze -- the progress bar got about 10% along and everything sat for 10-15minutes. I exited out of preupgrade and tried the rpm path.
That didn't fly either -- I was told that there were no packages marked for upgrade. I read more about preupgrade, including the fact that it might give the appearance of having locked up although it was still working. So I went back to preupgrade. This time, Fed10 didn't show in the selection box. It was, in fact, empty except when I checked the box for beta/unstable and could see Rawhide.
How do I get back to where I was with preupgrade so that I can finish what I started? Alternatively, how can I do a 9 to 10 upgrade from this point (preupgrade grayed out and rpm reporting no packages)? I expect to further upgrade to 11 in a couple of months, so the step to 10 is necessary. I do not have a separate /home partition and I have some very expensive (and difficult to set up) software that insists on sitting in /usr/local, so a full install, though doable, isn't something I want to undertake -- I'd much prefer to do to upgrades from 9.
View 6 Replies
View Related
Apr 30, 2010
Whenever I do sudo apt-get or use the Ubuntu Software Center, I can't download anything because a message comes up saying "Action requires installation of untrusted packages: The action would require the installation of packages from not authenticated sources." I've been trying to download GIMP and Thunderbird, so... I dunno what the problem is.
View 8 Replies
View Related
Sep 21, 2010
How to add packages using X-Window's add/remove packages option in RHEL-5.3 as it shows only the currently installed package and and does not show any thing when we click the button "available packages" ?
View 2 Replies
View Related
Feb 22, 2010
On Fedora repo I found VirtualBox-ose packages there. What will be the difference in operation/function between their packages and the packages download on virtualbox.org website?
View 5 Replies
View Related
Jan 5, 2010
HOW TO INSTALL PACKAGES IN IT ,IT SHOWS SOME ERROR (Cannot install source packages) OR (No packages were given for installation.)
View 5 Replies
View Related
Mar 31, 2011
im using fedora 14 and i have a slow internet connection. i want 2 install some packages from the fedora 14 dvd instead of downloading from internet using add/remove packages. i tried to edit /etc/yum.repos.d/fedora.repo and /etc/yum.repos.d/fedora-updates.repo but it dint work.
View 2 Replies
View Related
Jul 26, 2010
when I try to install anything using the Ubuntu software centre, I get the following message Requires installation of untrusted packages The action would require the installation of packages from not authenticated sources.
View 1 Replies
View Related
Feb 7, 2010
I download all packages of Fedora 12 64 bit and all rpmfusion packages , all of them free and nonfree. all of them is near 20GB, I download all of them by rsync.I download them in work,In home I use Fedora12 64 bit and do not have internet connection , I copy all packages with USB flash and copy them to my Fedora box , and I want install VLC and other codecs and Nvidia driver for some games.What I must do ?I said again I do not have internet connection in home but I have all packages , free and nofree and rpmfusion packages
View 14 Replies
View Related
Jun 24, 2010
I did the UPGRADE from Karmic Koala to Lucid, and everything was going well. But now I've been having problems with the UBUNTU UPDATE tool for the last 2 weeks. Every time I try to do an update check on the packages, I get the following message:Failed to fetch http:[url]....Release Unable to find expected entry deb-src/binary-i386/Packages in Meta-index file (malformed Release file?)
Some index files failed to download, they have been ignored, or old ones used instead.I've tried changing the servers to MAIN and others, and still no way to solve it. I've also checked for other posts, but haven't found a solution yet. Here's my SOURCES LIST (gksudo gedit /etc/apt/sources.list)# See http:[url].... for how to upgrade to # newer versions of the distribution.
View 3 Replies
View Related
Apr 24, 2010
I've been trying to fix this problem for quite a few days now and have done a lot of searching on these forums, Linux Mint Forums and some others Google lead me to and have has some success, but am now stuck.I have posted a thread on this same topic on the Linux Mint Forums, but have had no success (if you want check it out at:URL...Originally I received error messages when trying to update involving certain repositories which couldn't be accessed (because they either didn't exist or had been moved) and I hunted these down and changed or removed them.
I have done much searching, etc. and cannot find any broken packages. I have tried many many different commands which have mostly done nothing.I seem to be in a similar boat to this person: URL...
View 2 Replies
View Related
Feb 22, 2010
On Debian repo I found virtualbox-ose packages there. What will be the difference in operation/function between their packages and the packages download on virtualbox.org website?
View 3 Replies
View Related
Apr 8, 2015
I am working on a project which targets both 32 and 64 bit architectures at the moment. My system is amd64. I added i386 architecture using this guide. However, my problem is
Code: Select allapt-get install package-name:i386
prompts the removal of currently installed packages (amd64 arch.) which is the problem.
Code: Select allReading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
libportaudio0:i386
[Code] ...
Some of the packages I am talking about are
-libegl1-mesa-dev:i386
-libportaudio-dev:i386
Now, as of now, I want to carry out the compilation using 32 bit libraries, however, I really don't want to install 64bit version of all prerequisites each time I switch the compilation from 32 bit to 64. Is there any way to have both architectures at the same time?
View 1 Replies
View Related
Aug 31, 2011
I just upgraded from 11.2 to 11.4 and the installation/upgrade worked just perfect. I than followed the instructions in the "New User How To/FAQ", "Multimedia and restricted format" post. I was following the instruction in the 11.4 section. I added the additional repositories as explained. I then was on the section where it talks about going into software management and selecting the "Packman" repository and clicking to "switch systems packages" to the versions in this repository (packman). I than click this link and the "warning" screen appears and I am present with conflict resolution after conflict resolution dialog. It just seems that there are some many conflicts, it just seems wrong and I canceled.
The installation/upgrade appears to have worked just fine. My mail is there, audio and dvd play back worked the first try after the upgrade. I am not clear if this is what I should expect or their is something wrong or if I even need to complete this step for a successfully installation.
View 3 Replies
View Related
Dec 2, 2010
Is there a way using dpkg or apt-get to segregate user application packages from system packages? What I envision is an /apps directory structure that can be the install target for selected packages so not to "clutter" the storage areas for the system administration files/packages - maybe even with permissions set so that (a GROUP of) users could install packages on an Ubuntu server w/o SysAdmin guidance. This could also allow 1)system upgrades with or w/o including these packages, and 2)the sharing of /apps (via NFS) among common Ubuntu systems. Is this doable using the dpkg or apt maintenance tools?
View 2 Replies
View Related
Feb 17, 2009
I've just installed Fedora 10 LIVE CD on USB (1GB) on a MSI WIND Netbook (no optical drive) and realise I don't have the extra packages options available for installation. I do have the DVD ISO and I'm just wondering if there's a way of accessing packages in the DVD without reinstallation, like Open Office, Gimp etc. Is there a way of accessing softwares in the DVD ISO? or Some how install them into my currently running Fedora 10 on my MSI WIND?
View 5 Replies
View Related
Feb 22, 2009
i'm having issues with looking for extra softwares to install... YUM can only see already installed softwares, i can't see any extra...
this happened after i modified the yum.repo.d files for installing softwares from DVD... i edited the files back to original.. i've triple checked my repo files and they are correct...
is there anywhere else YUM has files for handling updates and software installations? like yum.repo.d? some config file of some sort?
i can't run update either... well i all can run but reports no updates available
View 14 Replies
View Related
Mar 27, 2009
Everything tells me they are in RPMFusion, but for the life of me, I can't locate them...
View 2 Replies
View Related
Jul 28, 2009
The same as Fedora, Mandriva Linux is rpm-based too, in most case they have similar package collection, but I've found some packages in Mandriva that are not included to "standard" Fedora Everything + RPMFusion + Linva repos. But there is no any kind of repo with Mandriva Packages for Fedora to be used with yum.
Yes, I know that I could try to install necessary rpms using rpm command, but this way I have manually download them and resolve dependences, it's very hard for many reasons. Also this way I could not easily group them and find similar packages by description. Is there any kind of repo with Mandriva (Suse and so on) packages for Fedora?
View 3 Replies
View Related
Nov 8, 2009
I'm a new user of fedora 11 n an off line user too. I want to install the packages from a dvd which contains all the repositories and suitable key files for it. I dono how to configure that.
View 4 Replies
View Related
Nov 3, 2010
I found out that there is an F14 DVD available and I couldn't see what was included in it. Where can I find out?
View 8 Replies
View Related
May 14, 2009
why the Fedora 7 Repository is missing? We run a number of Fedora 7 machines in the office and when I went to configure a local repository sync of Fedora 7, i noticed that [URL] no longer has any Fedora 7 packages? After looking at a few other mirror repositories, it seems this has synced down to the mirrors as well. Would like to know if anyone knows why this is the case and if the packages will be restored?
View 6 Replies
View Related
Jun 6, 2009
I heen been running Fedora F11 for a while now. I had been over to the RPMFusion website and enabled some repos for this release.
However, when checking for software updates, the latest release of KDE is always stuck at 4.2.2. Is there a way or a repo that I need give me something more up to date?
Is it because F11 is in freeze that there's been no update to KDE? Currently, the latest stable release of KDE is 4.2.4.
View 9 Replies
View Related
Jun 9, 2009
I'd like to try a clean install instead of an upgrade from FC10 to FC11. What is a good way of getting the list of all packages that were installed through yum, and how do I feed that list to yum on a newly installed FC11?
View 7 Replies
View Related
Jun 10, 2009
Anyone knows what packages are needed in order to run the latest frostwire on F11 ?
View 14 Replies
View Related
Jun 20, 2009
I am installing to an empty hard drive (that for some reason is shown as /dev/sde - I don't know if it is related, but seems weird - why is it not sda, and moreover, not hda - it is an ide drive), and install goes through fine, but in the end it says "no kernel packages were installed, your grub configuration will not be changed", and the only option is to reboot. After rebooting, I get thrown into grub command prompt, and have no idea what to do there.
View 2 Replies
View Related
Jul 28, 2009
Fedora 4 GB available size and size too large for your internet connection is slow, I want to install the system only without the rest of the packages I Can Get it .
View 1 Replies
View Related
Aug 2, 2009
I am using Fedora 11 and tried to install opera .I used the command yum install opera-9.64.gcc4-shared-qt3.x86_64.rpm (i downloaded rpm file and i was in the downloaded directory).Yum did check for dependencies and solved it to.At last it threw the error "Package opera-9.64.gcc4-shared-qt3.x86_64.rpm is not signed".
View 1 Replies
View Related
Dec 23, 2009
Fedora 11 was being run on a Toshiba Satellite Intel Core2 Duo @ 2.1 with 180 gig hard drive and 3 gigs of RAM. The laptop is encrypted, using Fedora's encryption option when installing 11. Just finished upgrading using the upgrading DVD. Fedora boots and runs fine, when update manager is accessed it says 338 updates available. When updating is attempted there is one unavailable package after another. Have attempted to break the updates down into manageable sections to no avail. There is no repository manager (that can be located). Where to from here?
View 1 Replies
View Related
