when I have a broken packages on the system and want to apt-get install something (completely unrelated to the broken package) apt-get starts giving me crap about the broken stuff and won't download and install the packages I'm asking for. How can I make it ignore the completely unrelated stuff about missing deps on my system and download what I want?
View 3 Replieswhat should not be mentioned:
*disabling "Automatically fix broken packages before installing or removing" in aptitude -- because it does not work
*editing /var/lib/dkpg/status -- not related to apt-get really
* -m or -f options of apt-get -- because they do not help me in any way
* downloading the package manually and using dpkg --force-depends-version -i <package> -- again, not apt-get
I need the --just shut the fuck up and dl&install the darn package option immediately.
I am just too tired and am missing something in the man pages for aptitude and not getting my search terms right but I can't seem to find a way to make aptitude ignore a couple of supposed broken packages (they work just fine by the way). The only way I can find to remidy the situation is to remove those couple of packages or upgrade several things to their Squeeze counter parts. I really don't want to try and do the upgrade as at home I am stuck on a 56k connection. Removing the broken packages I guess won't be too bad if I can find the debs again after I install a couple of things I want to add to my system. I would however just like to make aptitude ignore the state of my system and try to install what I want anyway.
View 14 Replies View Relatedseems like after a recent upgrade of stretch, i get a message (in italian)
Code: Select all
$ sudo apt-get install kde-full
Lettura elenco dei pacchetti... Fatto
Generazione albero delle dipendenze
Lettura informazioni sullo stato... Fatto
Alcuni pacchetti non possono essere installati. Questo può voler dire
che è stata richiesta una situazione impossibile oppure, se si sta
usando una distribuzione in sviluppo, che alcuni pacchetti richiesti
non sono ancora stati creati o sono stati rimossi da Incoming.
Le seguenti informazioni possono aiutare a risolvere la situazione:
[CODE]..
I have a computer with 128 ko of RAM (a very old one). I installed yesterday ubuntu 8 because ubuntu 9 requires 512 ko of RAM and was very slow. Now, I have problems to update packages and to install every thing. I changed the sources.list because it seems that links are no more available according to the error messages. (I have put many adresses for ubuntu 9 because I think the kernel is the same not as the kernel for ubuntu 10). But new problems have occurred like "broken dependencies". Now I want to correct, and I don't know how? I'm still a beginner with this OS.
View 2 Replies View RelatedI am attempting to setup an ftp server as a first project to get me going in the world of Linux however when I run the command apt-get install proftpd-basic ....
View 14 Replies View RelatedMy recent borked upgrade to -current inspired me to try to come up with a way to sanity-check the lib and bin dirs for broken library symlinks (possibly indicating missing libs) and for binaries and libraries that belong to no installed package, as well as missing dependencies.
This script is the result.
I've checked the script results manually, and it appears to be accurate, so I figured I'd post it here for a second opinion, and/or because others may find it useful too. I'm not aware of another popular method of doing this on Slackware, so here it is:
Code:
I just finished upgrading the last of 3 machines from F10 to F12 using preupgrade (all i686). Except for a non-critical hplip issue, all went well with the first two machines upgraded 1 week and 3 days ago, but some python F10->F12 updates were missing on the third machine that I upgraded yesterday, leaving yum inoperable. Thanks to good yum error messages, I was able to resolve the problem (I think), but I thought I should post to check if mine is a unique or common problem, to enquire if it may have resulted from some of the python packages being in "update transit" in the repositories, and/or whether something like this can be avoided in future? Details follow:
Upgrade appeared to go well except for some dejavu font dependency issues (experienced on all three machines) and libcrypto.so.7 missing for eet-1.2.2-4... (third machine). However, there was a boot message that some python module (can't remember which) was not present for some nvidia requirement, although video driver worked fine. When testing yum: First it complained that libpython2.6.so.1.0 was not present. Since that module conflicted (identified by rpm) with various python 2.5.*f10 packages that that were still on board, I copied libpython2.6.so.1.0 (from a current f12 rpm) into /usr/lib manually. Second, yum complained that urlgrabber was not available, so rpm with the latest python-urlgrabber for f12 solved that.
Third, yum complained that pycurl was not available, so rpm with the latest python-pycurl solved that. Yum now works! and boot message is gone! I ran "yum install python-libs" to make sure that any necessary dependencies were met following my manual installation of libpython2.6.so.1.0, which resulted in a bunch of python dependencies being upgraded as a result.
Code:
Missing components:
Is there a package that I can install that will satisfy this dependency? I am unable to locate anything other than the source here and here, but I'm also unsure if this is even the right package or if source this old is what gopdder is asking for. I'm looking for a package.
I am trying to run algodoo from terminal after I install it, but it doesn't run. It gives this error. I have been having troubles with permissions in the /usr folder recently, so I think that is what might have caused this. Please read through it thoroughly, as algodoo is actually located in the /opt folder.
Code: jon-Tuxbox:~$ sudo '/opt/Algodoo/algodoo/algodoo'
There are missing dependencies.
Please make sure that all the required libraries are installed.
Missing:
libcxcore.so.2.1 => not found
libcv.so.2.1 => not found
libhighgui.so.2.1 => not found
jon-Tuxbox:~$
I've been trying to fix this problem for quite a few days now and have done a lot of searching on these forums, Linux Mint Forums and some others Google lead me to and have has some success, but am now stuck.I have posted a thread on this same topic on the Linux Mint Forums, but have had no success (if you want check it out at:URL...Originally I received error messages when trying to update involving certain repositories which couldn't be accessed (because they either didn't exist or had been moved) and I hunted these down and changed or removed them.
I have done much searching, etc. and cannot find any broken packages. I have tried many many different commands which have mostly done nothing.I seem to be in a similar boat to this person: URL...
Linux mirage 2.6.18-128.1.6.el5 #1 SMP Tue Mar 24 12:10:27 EDT 2009 i686 i686 i386 GNU/Linux
I'm trying to compile tinyproxy for two days now on Redhat and can't seem to figure out whats missing here. The make bombs at:
Code: make[3]: Entering directory
GEN tinyproxy.conf.5
a2x: ERROR: xmllint --nonet --noout --valid /backup/builds/tinyproxy-1.8.1/docs/man5/tinyproxy.conf.xml returned non-zero exit status 4
[Code].....
I installed a Amsynth from Lucid in Karmic using:
dpkg --force-depends-version -i amsynth_1.2.2-1_i386.deb
The reason for installing the Lucid version is because Karmic version is 3 years old and crashes on my machine. The Lucid Amsynth package depends on newer versions of libatk1 and libjack0 than Karmic has, but I thought I would take a risk, and turns out Amsynth runs fine. However aptitude tries to uninstall Amsynth every time I do an upgrade. I think I've managed to put it on hold but now aptitude aborts. How can I tell aptitude to ignore the broken package and carry on.
if there is a way to blacklist certain packages when updates come around. The reason for this is that I have two repositories that contain Smplayer and Mplayer. But one repository versions of this aren't VDPAU active (but the build is newer).
View 1 Replies View RelatedI am following [URL] to install ubuntu on my beagleboard via Ubuntu 10.10 on liveCD. When I enter this command in terminal.
"sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot beagle"
It gives me a error sayings Dependencies are missing.
"Missing pv.Your System is Missing some dependencies
Ubuntu/Debian: sudo apt-get install uboot-mkimage wget pv dosfstools btrfs-tools parted"
And when I enter the that above in terminal I get the following error.
Unable to locate PV.
I have an ASUS P5Q PRO motherboard with an integrated Atheros AR8121/AR8113 PCI-E Gigabit Ethernet Adapter.I installed Ubuntu 10.04 "Lucid" 64bit Kernel version 2.6.32.21 I have read that the driver isn't in the kernel, but there's a strange thing :
First if I try to run lspci from command line it doesn't reports Atheros Ethernet Controller.
Second If I try to run lshw -C network from command line it doesn't reports Atheros Ethernet Controller.
Third if I run ifconfig it only returns my loopback address.
Can I suppose that my Ethernet Intel Gigabit Controller is broken or that Atheros driver is missing?
Code:
running on fedora 12 x64 and glibc-common is installed (glibc-common-2.11.4.x86_64)
Also, if im running a x64 system, why are most of the packages listed i686?
A couple of weeks ago, I went to run a yum update, but got this message:
Loaded plugins:
I've been running yum with --skip-broken since, but I'd like to know what package I need to get to the service level that xulrunner and firefox need. I'm running Fedora 12.
This has been bothering me for a while. I thought if I waited a dependency would get fixed and the update would work, but it hasn't for a while now. I have included the error when trying to update gcc and the libraries. Skip broken skips everything so no dice there.
View 1 Replies View RelatedWhen I first started using Unity, I configured the dual monitor system under the settings program. I then changed my xorg.conf, but Unity is ignoring that configuration and switching to its own. I think this might have something to do with RandR, but I'm not sure. Is there a way to make Unity use the xorg.conf configuration?
View 1 Replies View RelatedIs there a way to force rsync to not make directories in its destination directory; ie, to simply dump all of the files from the source directory directly into the destination without copying any of the folders that the files were originally in? I tried --no-dirs, but that seems to only be for empty directories.
View 1 Replies View Relatedmy OS FC13 is missing some packages. iwant to reinstall that but my network cards are not enable so i want to do it in rescue mode. how to do that in rescue mode.i know i will reach till chroot /mnt/sysimage. after that if i install any package then if i reboot my system will those packages will be availabe in real OS.
View 9 Replies View RelatedI am currently trying to upgrade over 100 rpms on multiple Red Hat servers. Whenever I try to do a rpm -u /packages/*.rpm i recieve a failed dependencies error on the very first rpm. I know that I can go though each rpm one by one and trace each dependency but that will take forever. Is there a way to skip these errors? I know the -nodeps command for rpm but I dont want to screw something up but running all of these rpms on -nodeps
View 10 Replies View RelatedEclipse cannot start and I can see the following in the log:
java.version=1.6.0_22
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=linux, ARCH=x86_64, WS=gtk, NL=en_US
Command-line arguments: -os linux -ws gtk -arch x86_64
!ENTRY org.eclipse.osgi 2 0 2011-07-09 15:01:23.881
!MESSAGE One or more bundles are not resolved because the following root constraints are not resolved: .....
and etc. those files are actually in /usr/lib64/eclipse/plugins/ but system cannot find them as I see.
It happened after I played with Eclipse's software configs and broke some dependencies there. After I tried removing and reinstalingl eclipse I notices that /usr/lib64/eclipse files don't change and I have the same broken sortware install configuration. So I deleted the folder usr/lib64/eclipse and reinstalled Eclipse. It didn't work. I restored usr/lib64/eclipse from eclipse~ and now see that error log. What is the way to fix it or probably remove eclipse completely and reinstall that /usr/lib64/eclipse/ becomes as it was by default.
I have a fairly old debian distribution running on the linux Kernel 2.6.18-4-686 and I did something silly which has broken multiple packages. I use the manual package installation command (sudo dpkg -i filename.deb) to install a single package (gcc base) however I did this using the latest version of the package which seems to have broken my GCC package completely and I am unable to compile c++ anymore.
When I now load the Synaptic Package Manager it tells me that I have 10 broken packages and when I use the fix feature it tells me I need to update other packages to fix the depencies (it selects almost every single package on my system to be removed at this point!).
I cant change the system too much because the software packages are set up specifically to run a certain application and I don't want to change anything incase I make it stop working!
So my question is this:
If I go to the synaptic Package Manager and uninstall the broken packages (they are all gcc related), will I be able to use the aptitude command to install GCC again? If so will it automatically install the version of GCC that will work with my system? or will it try and install the latest version and then update the rest of my system?
I'm using andLinux and for whatever reason, emacs seems to think that the file I'm editing has been changed every time I try to edit/save and keeps reprompting me. Very annoying. Is there a way to make emacs stop checking the file on the disk?
View 1 Replies View RelatedHow can i make an application ignore widget style configurations in kde? Like Synaptic and some other applications do.
View 4 Replies View RelatedI'm having problems with networking. I just installed Debian 6 SServer LAMP and it didn't autoconnect to internet. I plug in the internet to my eth0 (default) port, and I keep getting timeouts. I found that dhcp3-client was not installed and fixed that. My etc interfaces has this for eth0: Auto eth0 Iface eth0 inet dhcp What other packages or config do I need to make the internet work? It's missing something basic that wasn't setup properly. I do get the correct dns address to my isp provider when I check etc resolv.conf. It just can't dhcp discover.
View 1 Replies View RelatedI've been trying all morning to update from a working 9.10 to 10.04 and unfortunately every time I try it blocks me.
An unresolvable problem occurred while calculating the upgrade: E:Unable to correct problems, you have held broken packages.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.
Restoring original system state
I've uploaded the full apt log to pastebin here:
[URL]
I have Ktorrent installed via the repositories and its always worked perfectly. Today I ran software update with KPackageKit and it installed updates. It told me that KTorrent had to be removed to continue and without thinking I hit ok. Now my KTorrent is gone. When I try to install it on the terminal with
Code:
sudo apt-get install ktorrent
it gives me this error.
Code:
$ sudo apt-get install ktorrent
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]...
The following packages have unmet dependencies:
ktorrent : Depends: ktorrent-data (= 4.0.3-0ubuntu1) but 4.0.5-3ubuntu1~maverick1~ppa1 is to be installed
E: Broken packages If I remove and reinstall ktorrent-data it doesn't help. build-dep doesn't help. autoremove and then trying to reinstall doesn't help. I'm not running some strange dev version of anything. I have a standard Kubuntu 10.10 amd64 installation and my KDE version is 4.6.2 from the regular repositories. I run updates (standard repositories) almost every day and have never seen anything like this before.