After updates installed today, Fedora 15 shut down hangs with the following: 1272,2981621 Panic occurred- switching back to text console. The Caps Lock light flashes and I have to manually shut down the computer. As an aside, I am notified of 65 more updates but, I cannot install them. I'd really like to keep using Fedora.
View 1 RepliesThe author (somewhere on these Ubuntu forums directed........ Ctrl + Alt + F1 which I thought was going to be the "Terminal" but nothing similar. I have about a half dozen different names/passwords for Ubuntu but none will work to log in. How to get out of this text console and back to Ubuntu GUI? And, how to read my lost LogIn name and password for this "Text Console"?
View 2 Replies View RelatedI want to report a bug I recently found to devs.
I found that when switching to any TTY and then back to the graphic mode a rectangle of about 5cm long x 1 and 1/2cm tall appears in the right-down corner of the screen, filled with trashed vram data.
I did a screen capture but the thing didn't appear - opposed as ghost would! xDD But the fact is I can see it, no matter I go full screen and then back to normal, no matter I switch again to any TTY and then back to TTY7, it sit's there until I reboot: closing the session and starting a new one don't work either, the box is still there.
I'm running Koala 9.10 amd64 on a QuadCore 8400 and ATI 5750HD video card with drivers provided by Ubuntu itself, not the ones that came with the graphic card CD neither the ones available to download from ATI's website.
I'm running Emerald and Compiz, too.
I am running Ubuntu 10.10 and I have been keeping it updated via update manager.Last night the update manager popped up and I selected to update all required updates without checking what the updates were.While shutting down I noticed that I needed to reboot to complete the update, so I rebooted.After reboot the wireless network card disappeared. So I moved the PC and plugged in the ethernet cable. Oddly sometimes it shows disconnected for no reason and I have to reboot.What's even worst is that Ubuntu now locks up completely within 15 minutes of a reboot.None of the alt+sysrq commands do anything!How do I find out what the updates were and is there any way to I revert my system back to pre updates without having to reinstall?
View 6 Replies View RelatedMy fedora12 send me this error message:
Code:
An internal system error has occurred ..... Please use your distribution bugtracker to report this error ... What is the bugtracker? How i can use it?
I had an old Dell Precision 470 with 2 hard drives, a 250GB boot drive with Red Hat installed, and a 500GB hard drive with data on it. Both of these are SATA. The computer died and I have replaced it with a Dell T3500. I was hoping just to move the hard drives into this computer and let generic drivers take over until I make the necessary changes. Unfortunately, I get the following kernel panic message after POST:
VFS: Cannot open root device "Volume00/root" or 00:00 append a correct "root= " boot option Right now the arguments to boot from the hard drive are:
ro root=/dev/Volume00/root hdc=ide-scsi hdd=ide-scsi
Code:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module> main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main
backend.dispatcher(sys.argv[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 710, in dispatcher
self.dispatch_command(args[0], args[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 657, in dispatch_command
self.update_packages(only_trusted, package_ids)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1948, in update_packages
signed = self._is_package_repo_signed(pkg)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1437, in _is_package_repo_signed
repo = self.yumbase.repos.getRepo(pkg.repoid)
File : /usr/lib/python2.6/site-packages/yum/repos.py, line 121, in getRepo
'Error getting repository data for $s, repository not found' $ (repoid)
I cant update my system what can I do?
My computer isn't booting up or logging in, period, and I was wondering if I could run any of those Grub fixes if I downloaded it through the console. Can I run anything online besides yum using the console? I have a 4 gig USB Flash drive if necessary.
View 4 Replies View RelatedI have install Fedora 13 on my machine (Intel 815 Chipset with graphic card of nVidia GeForce 256), but the default resolution of text console wound have be about 1024x768. I intend this machine as a simple samba server (without X Window), so just a low-resolution monitor will work with it. However, this monitor can't work with the resolution higher than 800x600, I have to change the resolution lower. I have searched the solutions for this problem on Google. Most of them thought I should fix /boot/grub/grub.conf, append "vga=769", "vga=771" or even "vga=ask" to the end of the line start with the word "kernel". I have tried but all of them doesn't work. Just like Fedora 13 use the value from the other configure file overwrite the one list in grub.conf. As everyone knows, if I installed and launched X Window on my machine, I could query and change the resolution with command "xrandr". Are there some similar ones that can work on text console?
View 3 Replies View RelatedI just installed Fedora 12 and while I was trying to install Skype, there was a system crash and since then I cannot install any other software or cannot even access 'add/remove software'. Whenever I try to install a software or try to open the 'add/remove software' or, 'Software Updates' I get the message
'An internal system error has occured'.
and inside it contains this-
Code:
Traceback (most recent call last):
File "/usr/share/PackageKit/helpers/yum/yumBackend.py", line 2956, in __init__
self.repos.confirm_func = self._repo_gpg_confirm
File "/usr/lib/python2.6/site-packages/yum/__init__.py", line 717, in <lambda>
repos = property(fget=lambda self: self._getRepos(),
File "/usr/lib/python2.6/site-packages/yum/__init__.py", line 496, in _getRepos
self.conf # touch the config class first .....
I tried these using the terminal-
yum clean all
yum metadata
sudo yum clean all
yum clean metadata
and all of these gave me the same result-
Code:
Loaded plugins: presto, refresh-packagekit
Config Error: File contains no section headers.
file: file://///etc/yum.repos.d/skype.repo, line: 1
"su -c 'yum -y install skype' "
Everything else is working fine, but I just can not install or update any more software.
A thread on text size in console got sidetracked to discussing fbterm. In an effort to not (further) hijack that thread, I've started this one.[URL].. Anyway, I was asked how I got ibus-fbterm working. I only really got it working in ArchLinux, not Fedora, but I suspect if someone works enough at it, they can get it working in Fedora as well. I do a minimal installation, installing X and fluxbox or openbox. One also needs to have framebuffer working--if you have nomodeset in grub, due to, for example, using an NVidia driver, this won't work. You will have a /dev/fb0. In Arch, this is owned by root:video. When installing fbterm, there's a message that one should add themselves to the video group in order take advantage of this.
I used it with ibus-anthy. First, I made sure that that worked properly in X. I then installed fbterm and ibus-fbterm. So, to get it working, first be sure that ibus and your desired input method is working in X. Then, you have to have rights to /dev/fb0--in Arch, this was easy, making myself a member of the video group, not sure about the best way to do it in Fedora. As a temporary experiment, I just did a chmod 777 on it, which is obviously not the best solution.
Now in console, start ibus
ibus-daemon --xim
Before running fbterm, run the command
setcap 'cap_sys_tty_config+ep' /path/to/fbterm
as root or with root privilege. In Arch, the setcap command was there, in Fedora, I had to install it. I'm afraid I forget what program provided it, I had to use yum provides */setcap Then call ibus-fbterm with ibus-fbterm-launch You'll see that your console looks slightly different. Now, if it works, you should be able to hit ctl+space and then input the language of your choice (in my case Japanese.) In Fedora, it didn't work. I would hit shift space and enter characters, but nothing happened.
In Arch, it was a bit better--I'd hit ctl+space and enter something. Then, when I hit enter, I would see the results of what I'd typed. I couldn't edit it until I'd left input mode by hitting ctl+space again. That is, after hitting enter, I'd see the result of what I typed, but couldn't backspace.or otherwise go back. What it would do is, when I was trying to select kanji, by hitting the space bar after t yping the phonetic, is, after the second or third hit of the space bar, it would show the kanji choices and I could pick one.
I'm running Fedora 15 64bit KDE.
After doing a #yum update and updating 451 updates, after rebooting its gets to the white bar going to Fedora 15 at the bottom of the screen and just stops. No error messages or nothing.
What command could possibly bring Fedora back?
I boot into gnome just fine, but as soon as I switch to console 1 or 2 or N (insert number here) it distorts my video across all of them. It seems like it's changing the refresh rate either horizontal or vertical and I just don't know how to solve the problem. If it distorts I can't get it back to decent readable graphics without a reboot. Was doing the same thing in ubuntu, and that's part of the reason I installed suse. I am running 1600X1200 with 50 refresh rate in gnome and have swapped the console resolution around, trying different options but still have the same problem.
View 8 Replies View RelatedI recently upgraded from 10.10 to 11.04 and have been unable to switch to console mode (Ctrl+Alt+Fx key combo). The system just freezes on attempt (not even capslock on off works) and the only option is hard reset. I am on a SONY VAIO VGN-CR353, just in case.
View 4 Replies View RelatedI am logging into an Ubuntu 8.04 machine using ssh, so I use a console. The keyboard layout is US-standard, obvioulsy. However, I would like to use french-canadian keyboard layout. And I don't know at all how to switch it in console. Give me Gnome or KDE, and we're done. But this is console only. I guess it has to do with the loadkeys command. Ok. I retrieved from the web a file cf.map.gz. Maybe ubuntu requires a different kind of file? Using "locate cf.map" I get nothing, except the file I have downloaded. Any package I should demand to be installed? (if yes, what do I do once they are in?) I tried using both the .gz and uncompressed files.
Code:
loadkeys cf.map.gz
Couldnt get a file descriptor referring to the console
Code:
loadkeys -u cf.map.gz
Couldnt get a file descriptor referring to the console
Loading cf.map.gz
[code]....
They tell us about some program, console-data, using root privileges. Intriguing, but I am only a user, and do not have any root privileges. The system admin. has never used another keyboard layout, and knows even less than I on this matter. I tried similar stuff on my openSUSE at home, on a newly created experimental account, and I am equally unable to change within the console the keyboard layout (similar error messages).
I am using an external monitor on a laptop whose default screen is dead. This works fine with Gnome or KDE, but when i do a switch to console (ctrl-alt-fnX) my monitor loses it's signal, and i wind up with a black screen. Alt-fn7 gets me back fine, but i am really missing the console...
Ubuntu 8.04.4
Computer switch monitor key (fn-f does nothing, even tho it works fine when in Gnome.
I just installed some updates, one of which might have been
kdebase-3.5.4-20.el5.centos.i386.rpm.
Before I installed the updates, switching to a VT console using ALT+CTRL+Fn (n=1..6) worked, but after installing the updates it quit working within a KDE session. It does still work from the login screen (so it's not an X problem, or a /etc/inittab problem). After logging into a KDE session, I can get to a VT console if I first use ALT+CTRL+F12
Here's the keyboard section from xorg.conf:
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
There is no option DontVTSwitch line. I have the same problem on another computer. That one is more of a problem because its keyboard doesn't have an F12 key. What to do?
If I am logged out of GNOME and switch to tty1 and back, I get a stream of errors (which I can't copy...) on a black console. If I am logged in I am fine. This is very annoying because I would like to be able to log out of GNOME while I am running particularly memory-intensive scripts (they approach the limit of my 3.8 GBs of RAM).
View 7 Replies View RelatedA yum update got interrupted - I cleaned it up, reran yum update - everything appeared okay but now system won't boot
kenel panic - not syncing VFS :unable to mount root fs on unknown-block(0,0)
any hope to repair this or must I reinstall linux ?
My Audio stops playing when switching to console from Xorg. When I switch back it continues playing. Is it supposed to be like this? Any way I can make it play continuously? I've already checked the Howtos and this forum for this problem but havent found anything similar.
View 9 Replies View RelatedI am having a problem getting my virtual console back after starting XWindows. The display goes blank when I press Ctrl-Alt-F1. If I press Ctrl-Alt-F7 I get the X session back. I have tried setting vga=x31A on the linux boot up. Also tried rdev -v /vmlinuz -1, and rebooted. I have tried two different monitors, same problem. One is a an LCD (Philips 170S6Fb/27, the other a Samsung Sync Master 750s. Originally the Samsung worked fine. I could switch between X and VC no problem. Now that I have the LCD monitor working after changing the XF86Config, I have this problem.
My kernel is 2.2.15-5.0, Redhat 6.2. Here is the output of lspci for the video card:
00:0c.0 VGA compatible controller: ATI Technologies Inc 3D Rage II+ 215GTB [Mach64 GTB] (rev 9a) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 4755
Flags: bus master, stepping, medium devsel, latency 0
Memory at e2000000 (32-bit, prefetchable)
I/O ports at b400
Memory at e0000000 (32-bit, non-prefetchable)
Expansion ROM at 000c0000 [disabled]
Hopefully there is someway to control how linux sets the video mode when switching consoles.
I switched to Ubuntu with a clean install and whipped out the Mac OS X. I now want to switch back to this and I have the .dmg file on my flash drive with the OS X on it. I was wondering how I would go in installing this since it is a .dmg file and since it needs to be installed.
View 9 Replies View RelatedI like to explore, but it seems this time I have gone too far. I tried using vi to edit /etc/sysconfig.d/windowmanager but no changes seems to do anything.
View 7 Replies View RelatedSo in a failed experiment, I tried out xmonad for a couple months. I would now like to switch back to metacity for my default window manager. How can I do this?
View 1 Replies View RelatedFedora 15 software update "unspecified transaction error occurred" at system info before installing updated list. After unchecking every (no arch) update, all the rest (i686) were installed. now all (no arch)updates remain on the list to be installed.
View 1 Replies View RelatedI just installed PHP 5.2 using this guide [url]
The install did work without errors and is listed correctly on yum but isn't working when I test a php script.
So now I need to downgrade back to the php 5.1 but yum is now stuck on this atomic repository, how do I get back to the Centos repository and downgrade PHP to 5.1?
I have an older PC that was running F11 without any problems. At some point I started updating to F12 through the web and got a a nice black screen that pretty much hosed my OS. (Not a big deal).So I went and downloaded the F12 Live CD which did the same thing.., at some point just after install the screen would be black and reset is the only option.Got the full F12 32-bit DVD and during the installation I get: "X Startup Failed,Falling back to text mode."Finishing the install I get to a nice black log-in prompt so I can log-in as root.From there I cant do much as I am a n00d in Linux to some extent and my network doesn't work
My video card is a Geforce FX 5200 which installed and worked just fine under F11 (without me doing anything but basic install and Ubuntu 9.10)
I have been using SuSE Linux in text mode for the longest time (since 8.0) and I'm often more comfortable working in that mode. I have just installed 11.3 with GNOME as a fresh install on my dual-boot laptop and I am pretty happy with the way things work. But I still languish for my text mode from time to time.
So: I know about right clicking on the desktop and selecting "Open in Terminal" and that should really solve my needs, but I read here in an older thread about using Ctrl + Alt + F2 (as it happens, it can be F1, F2, F3, etc.) so I decided to try it out. Well, when I do that, I get exactly what I expected --- a black text screen with a login: prompt and I can do all my little texty things just as sweet as can be. Except for one thing: I can't get back! The only way I've been able to get back to a GUI is to use "shutdown -r now" as user: root. Also, Ctrl + Alt + F1 removes the GUI completely for all four terminals. Can someone tell me more about this function where I might read an "info" or "man" about it? I don't even know what it is called, so it is hard to know how to search. (Admittedly, I haven't tried Google yet.) uname -a ==> Linux linux-127g.site 2.6.34-12-default #1 SMP 2010-06-29 02:39:08 +0200 i686 i686 i386 GNU/Linux
I'm new to the forum and actually to Debian as well. Have been running Ubuntu for the past few years. Just setup a small Dell laptop to use as a Squeezebox and Print server. It's been up 6 days without a hitch as far as serving music to the squeezebox and printing. The problem is that it loses it's static IP, so as long as I look it up and change the radio Squeezebox and printer definitions around on the clients everything keeps working.
Does anyone have any ideas?If the connection drops for some reason and the system has to re-initialize the connection, shouldn't it use the /etc/network/interfaces file and get back to the static IP that it is configured for?If anyone has any ideas of why this could be happening or have a solution, I would really appreciate the help.
I recently tried out the awm version of the desktop environment. When I switched back to the Gnome desktop, I found a couple of titlebar-like artifacts left on the desktop.I did some experimenting, using System Monitor and the Kill xxxx command and managed to rid myself of one of the artifacts. The remaining artifact can be taken care of by using kill xxxx comand for the gtk-window-decorator but, this basically renders window buttons useless after the command is issued.
I think I had a couple applications running at startup in Gnome desktop before I switched to awm, and they didn't start at startup when I returned to Gnome desktop, but the titlebar-like artifacts did.Is there a way to reset the state of the gtk-window-decorator in a manner that is less destructive, and which allows my desktop to be clear of this artifact?