I just installed PHP 5.2 using this guide [url]
The install did work without errors and is listed correctly on yum but isn't working when I test a php script.
So now I need to downgrade back to the php 5.1 but yum is now stuck on this atomic repository, how do I get back to the Centos repository and downgrade PHP to 5.1?
I have managed to blow up something trying to follow this:http://wiki.centos.org/AdditionalResources/Repositories/RPMForgeHere is what i get when i try: yum update
Quote:Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: mirror.nuvio.com
[code]....
I've noticed that on one of our servers apache is running on nice 19.Any idea where can I change it back to the default 15?I know I can change it on the apache startup script, but I thought it's probably better to change the default value that was probably changed somewhere.It is running as a service on startup.
View 1 Replies View RelatedA while back I had to install an extra yum rpm repository to my CentOS 5 server as I needed newer versions of httpd (v2.2. and php (v5.1.6) than were in the default repositories at the time.
I now wish to revert back to the standard repositories, I have removed reference to the custom repository from etc/yum.repos.d/ and used '# yum clean all' but cannot seem update these packages when I use '# yum update'.
Is there a way of making the rpm packages for httpd and php go back to using the standard repos, or will I have to manual update them from now on?
Or could I uninstall those rpms and reinstall from default repo without breaking the whole server?
I switched to Ubuntu with a clean install and whipped out the Mac OS X. I now want to switch back to this and I have the .dmg file on my flash drive with the OS X on it. I was wondering how I would go in installing this since it is a .dmg file and since it needs to be installed.
View 9 Replies View RelatedI like to explore, but it seems this time I have gone too far. I tried using vi to edit /etc/sysconfig.d/windowmanager but no changes seems to do anything.
View 7 Replies View RelatedSo in a failed experiment, I tried out xmonad for a couple months. I would now like to switch back to metacity for my default window manager. How can I do this?
View 1 Replies View RelatedI am trying to configure DNS on my CentOS 5. When i am trying to install BIND using YUM, i am getting the following error.
Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile http://mirror.centos.org/centos/5/addons/x86_64/repodata/repomd.xml: [Errno 12] Ti meout: <urlopen error timed out> Trying other mirror.Error: Cannot retrieve repository metadata (repomd.xml) for repository: addons. Pl ease verify its path and try again. I am able to ping from Linux to windows OS. But when iam trying to do
[Code]...
I'm new to the forum and actually to Debian as well. Have been running Ubuntu for the past few years. Just setup a small Dell laptop to use as a Squeezebox and Print server. It's been up 6 days without a hitch as far as serving music to the squeezebox and printing. The problem is that it loses it's static IP, so as long as I look it up and change the radio Squeezebox and printer definitions around on the clients everything keeps working.
Does anyone have any ideas?If the connection drops for some reason and the system has to re-initialize the connection, shouldn't it use the /etc/network/interfaces file and get back to the static IP that it is configured for?If anyone has any ideas of why this could be happening or have a solution, I would really appreciate the help.
I installed centos 5.3 on my server one year back, it was getting update form yum till jan 2010. but now if i update it through yum it gives following error:
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* epel: ftp.jaist.ac.jp
* city-fan.org: download.virtensys.com
[Code].....
I am trying to install apache on centos-5-i386 (# yum install httpd) and get the following error:
==========================
[root@IDK3 /]# yum install httpd
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: centos.mirrors.tds.net
[Code].....
Edit: The url works if I leave out "repomd.xml" at the end; and the repomd.xml is exactly in that folder? i have downloaded the file but don't know how to use it.
Yum update do not respond and I get these exceptions. Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile [URL]... [Errno 14] HTTP Error 403: Forbidden
Trying other mirror. Error: Cannot retrieve repository metadata (repomd.xml) for repository: base. Please verify its path and try again I have search the forum but the suggestion have not help me resolve this issue. I tried both the mirrorlist and baseurl links in the CentOS-Base.repo file. I using proxy and have followed the instruction [URL]. When I run "yum --disablerepo "*" --enablerepo "rpmforge" list available" I get this
Loaded plugins: fastestmirror Error getting repository data for rpmforge, repository not found
I recently tried out the awm version of the desktop environment. When I switched back to the Gnome desktop, I found a couple of titlebar-like artifacts left on the desktop.I did some experimenting, using System Monitor and the Kill xxxx command and managed to rid myself of one of the artifacts. The remaining artifact can be taken care of by using kill xxxx comand for the gtk-window-decorator but, this basically renders window buttons useless after the command is issued.
I think I had a couple applications running at startup in Gnome desktop before I switched to awm, and they didn't start at startup when I returned to Gnome desktop, but the titlebar-like artifacts did.Is there a way to reset the state of the gtk-window-decorator in a manner that is less destructive, and which allows my desktop to be clear of this artifact?
I have Ubuntu 10.10 installed. I am very new to Linux. I am having a problem connecting to wireless network when I reboot to Vista OS. When I am using Ubuntu, it works fine. I have to plug in the LAN cable in order to connect to internet. When I try to connect to wireless network, I don't see any networks at all. My WiFi switch is ON. I keep switching back and forth between Vista OS and Linux.Narendra
View 1 Replies View Relatedsince 9.10.My microphone works, BUT only after I open the 'Sound Preferences' panel, and change the setting under the 'Connector' tab to another selection (any will do), then set it back to 'Microphone 1'.Since this works, I wondered if there is a way to make this happen automatically at every login?
View 7 Replies View RelatedI looked at the /etc/rc.d/rc.inet1.conf file it says something completely diff than the iwconfig. iwconfig is saying there is no wireless extensions on lo and eth1 but on eth0 all my info is there now on the conf file it says and ip address on eth2 and nothing on eth 0, or 1. does anybody know why it keeps jumping back and forth? one week its eth0 and maybe 2 months from now its eth1.
View 11 Replies View RelatedMy power settings is set to put the laptop screen to sleep after some minutes of inactivity. This works fine, however it doesn't want to come back to life if I move the mouse, type etc...
View 16 Replies View RelatedI been having a problem with default sound device. I have a TV card and use on-board audio. Every reboot the default soundcard switches between the two. I made an asound.conf in etc pointing to the on-board for Firefox to get sound, but since it keeps switching between the 2 devices I keep having no sound in Firefox. How can I set the on-board audio as default, and make it stick?
View 8 Replies View RelatedError Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module>
main()
[code]....
How can i find the default repository directory ?? one of the reasons why i need to know this is so that i can place any new downloaded .rpm files in that directory and then use
> yum install filenameto install that package .. (does that make sense ?? is that a good idea ??)I just installed a new linux and i am trying to get familiar with the enviroment I know that yum gets the source directories from /etc/yum.repos.d but i really couldnt understand the files in there.
I want to report a bug I recently found to devs.
I found that when switching to any TTY and then back to the graphic mode a rectangle of about 5cm long x 1 and 1/2cm tall appears in the right-down corner of the screen, filled with trashed vram data.
I did a screen capture but the thing didn't appear - opposed as ghost would! xDD But the fact is I can see it, no matter I go full screen and then back to normal, no matter I switch again to any TTY and then back to TTY7, it sit's there until I reboot: closing the session and starting a new one don't work either, the box is still there.
I'm running Koala 9.10 amd64 on a QuadCore 8400 and ATI 5750HD video card with drivers provided by Ubuntu itself, not the ones that came with the graphic card CD neither the ones available to download from ATI's website.
I'm running Emerald and Compiz, too.
The removal of the Firefox-Shiretoko Browser from the Main US Repository really wrecked me... I have no back buttons, no URL display, and all my bookmarks now have to be moved... (if I can figure out how to move them...) ooo, i miss my black-skin in Facebook...
View 4 Replies View RelatedAfter updates installed today, Fedora 15 shut down hangs with the following: 1272,2981621 Panic occurred- switching back to text console. The Caps Lock light flashes and I have to manually shut down the computer. As an aside, I am notified of 65 more updates but, I cannot install them. I'd really like to keep using Fedora.
View 1 Replies View RelatedWhere i can get/see original Maverick sources.list? I have googled but no results, maybe wrong search-words..
View 3 Replies View RelatedI am installing a cluster which is hidden from the rest of the world and there is no router either froma general login node. I would therefore require a local repository of the updates to CentOS5.4. When I checked I only found instructions for a full mirror. As I have no room and neither the human resources to setup and maintain a full-blown mirror, this is not a solution. However if I try to find updates for 5.4 to download in a repository-type of way I fail to find a solution. Maybe I am just not looking in the right places.
View 1 Replies View RelatedI have a computer with the release candidate of Windows 7 (which is now expired) that I'm intending to switch over to CentOS. Is there anything I should do(besides backing up files) before I try to install CentOS?
View 9 Replies View RelatedI'm contemplating to switch from sendmail to postfix. My current setup is very simple: a minimal CentOS 5.5 64bits install with Selinux enabled on ports 25, 80, secret sshd, 53 and 953. I also use Google Apps for my domain to manage the email accounts. Basically, I use sendmail only to email the daily logwatch, as well the email sent from my forum software. The issue that I'm facing is the forum is starting to hammer sendmail with a lot of emails.
My goal is to use Postfix only to send those forum emails. I don't need a SMTP setup, that is handled by Google Apps. Can I do that with Postfix? Will Postfix perform better than sendmail? All guides I saw on internet pair Postfix with Dovecot and the setup is a little complex, not to mention that I will never have email accounts created on server.
I was wondering if you have any handy guide who will basically replace sendmail with Postfix. Personally, I tried myself using the CentOS HowTo. I yum'ed postfix and system-switch-mail, then I disabled sendmail and switched the agent to Postfix. I left the main.cf config unchanged and tried to start Postfix (service postfix start), but I got a "master is stopped" message when I checked the daemon status.
I recently installed SLiM and wanted to give it a try. I found out that XDM actually loads a bit faster on my machine, so I'm going to stick with it. I uninstalled SLiM, leaving XDM the only login manager on my system, but how can I change it back to the default? When my system boots up, I get the default console login.
View 5 Replies View Relatedmy problem is i have setup 2x ppp used for adsl to split local and international bandwidth ppp0 is using the international account and ppp1 is using the local only account this all works fine but every so often i notice when i do an ifconfig that ppp0 is dialed up on the local account and ppp1 is dialed up on the international one, and sometimes a reboot fixes it and sometimes it doesnt
my config files are the following:
# Default ADSL network config file, as used by redhat
USERCTL=yes
PEERDNS=no
TYPE=xDSL
[Code].....
my question is simple and yet in true linux fashion the answer eludes my best google searches.
i accidentally removed my taskbar from the bottom of my Fedora 11 KDE desktop. after messing around with it i was able to get a working panel using the add panel feature, but i dont like it.
how do i restore my KDE desktop to the Leonidas default that it installs with?
