Just installed fresh FC14. I built/installed a project with some new man-pages. I'd like to update the apropos/man database. makewhatis was still present in FC13.
View 6 RepliesI have been running FC13 for some time now without any problems on my HP dc5800 Microtower. Recently I ran a software update, and when I rebooted the machine I got a blank screen with only a blinking underscore in the upper-left corner. Rebooted several times to no avail. I thought perhaps I had made a mistake, so I just reinstalled. I have tried reinstalling several times now with both 32-bit and 64-bit FC13, each time with the same result: everything works fine up until I install software updates; then after the next reboot I get a blank screen with the blinking underscore. I see the POST screen, and then it just goes blank. It doesn't seem to respond to any keyboard/mouse input; I eventually have to hold down the power button to make it power off.
View 5 Replies View RelatedRecently I upgraded my kernel to 2.6.34.6-47.fc13.x86_64 and then also did an update to 2.6.34.6-47.fc13.x86_64. Both of these kernels I do not get a login dialogue box. I still have the one kernel that works and it is 2.6.33.8-149.fc13.x86_64. The system I am on has a Radeon graphics card, but I don't think the graphics card is the issue since I get the login screen's background, but not the login screen itself. <Later> After messing around with this for a while I came to the conclusion that livna-config-display was messing with the xorg.conf file. Removed it and things seem to be working fine now.
View 1 Replies View RelatedFedora (2.6.34.6-47.fc13.x86_64) I installed that update, during the installation process it said that it had to remove three packages, one of them was kmod nvidia for the old kernel (Fedora (2.6.33.8-149.fc13.x86_64))After the update finished installing the new kernel, I restarted the system and Nvidia did not load. (I assume because Update manager removed the old nvidia? But I also assumed that a new version would be installed automatically?)I received the following Boot messages:
Code:
Entering non-interactive startup
Starting monitoring for VG vg_user1: 3 logical volume(s) in volume group "vg_user1" monitored
[code]....
I'm confused, if Update Manager removed kmod nvidia, then why does yum say it is installed? And why doesn't the new kernel update work with that version? Or should I install a driver version for that particular kernel? I've read while searching that I need to install a kmod-nvidia for that particual kernel version and that I should login to my previous kernel until that happens, is that the problem I'm having?
Why don't rpmfusion and fedoraproject release the kmod-nvidia and kernel updates at the same time to avoid problems such as this? Does anyone know how long does it usually take for rpmfusion to release the new kmod-nvidia driver for the latest kernel?
An a stable FC13 system, after resolving deps and downloading rpms, 'yum update' aborts with this single error message:Transaction Check Error:installing package kernel-PAE-2.6.33.5-124.fc13.i686 needs 801KB on the /boot filesystem.Silly thing is, I have at least 52MB available on /boot.An important datapoint is that I resized the boot partition since the initial install from 64MB to 128MB, which makes me think perhaps yum or anaconda recorded the original partition size, and is not looking at the current (correct) size of /boot.
View 2 Replies View RelatedGoogled this and found the same problem mentioned in the yum site:
[root@plouton ~]# yum update kernel
Loaded plugins: refresh-packagekit
Setting up Update Process
Resolving Dependencies
--> Running transaction check
---> Package kernel.x86_64 0:2.6.33.6-147.fc13 set to be installed
--> Finished Dependency Resolution
--> Running transaction check
---> Package kernel.x86_64 0:2.6.33.4-95.fc13 set to be erased
--> Finished Dependency Resolution
Dependencies Resolved
I am trying to install squirrelmail on Ubuntu 10.4 and at some point in the instalation process I get the following error:
[Code]....
Code:
$ su -c 'yum install wine'
this forum won't let me put all the text in Transaction Check Error: package openldap-2.4.21-6.fc13.x86_64 (which is newer than openldap-2.4.21-4.fc13.i686) is already installed package nss-softokn-freebl-3.12.4-19.fc13.x86_64 (which is newer than nss-softokn-freebl-3.12.4-17.fc13.i686) is already installed
Last nights upgrade of java-1.6.0-openjdk-1.6.0.0-43.1.8.2.fc13.i686 and java-1.6.0-openjdk-plugin-1.6.0.0-43.1.8.2.fc13.i686 prevent the loading of Ameritrades Command Center.Downgrading to version 1.6.0.0-37 fixes the problem. I'll post the bugzilla number as soon as I get the chance to file it.
View 3 Replies View Relatedi need to update my mysql database from 5.0 for 5.1, i have several java application and php application running on that server, without disturbing the setup i need to upgrade the server can someone suggest a method of doing this
View 2 Replies View Relatedhow to rebuild the system update database?
View 5 Replies View RelatedI'm having problems with my coding. Here is the problem: I have a database with a list of products. I can list all the products OK At the side of each product I have an EDIT and DELETE button. The delete button works fine and deletes the item. The EDIT button displays a form with all the details from the database. I can then edit this form and click on UPDATE. This is the code that I have to update the database:
$group = $_REQUEST['group'];
$description = $_REQUEST['description'];
$quantity = $_REQUEST['quantity'];
$price = $_REQUEST['price'];
$type = $_REQUEST['type'];
$type2 = $_REQUEST['type2'];
$order = $_REQUEST['order'];
$status = $_REQUEST['status'];
[Code]....
I cannot see anything wrong with this code. But when I click on UPDATE (in the form), I get Error in executing UPDATE exhausts SET group = 'Alloy Silencers', description = 'RS 125 Aprilia', quantity = '1', price = '57.00', type = 'alloy', type2 = 'all', order = '', status = '1' WHERE id = '3' query
error:1064 You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'group = 'Alloy Silencers', description = 'RS 125 Aprilia', quantity = '1', price' at line 1I have used this code many time before in other projects without problems.
I always install the Ubuntu Updates that automatically pop up every few days.
Today I installed the update and it wiped out my entire Evolution database.
The Evolution e-mails and e-mail history are still there, but not a single Contact.
Is there any way to 'uninstall' today's update or go back to a time before it was implemented?
Is anyone else having this problem? I do have a database backup, but its about a month old. So I don't want to import it unless there is no way to get the current version back.
Been trying to get itunes going in unbuntu 11.04. Tried gtkpod and it kept crashing when trying to update database. Looked into itunes thru wine. I think I could load it in wine but all my mp3's are on a linux box - ext4. From what I understand, wine will look to a windows partition for the mp3's. I know windows cannot read ext4. All I need itunes for is to load and delete songs on a shuffle ipod. Don't need itunes store, etc so I don't care if that part works or not. Before I go to the trouble of itunes on wine: Is this assumption correct?
View 4 Replies View RelatedHow can I make shell script to use sqlplus to update some database table? This is what I'd like to make:
- login to db server (I have create ssh-keygen to bypass the login session)
- login sqlplus / as sysdba
- update status set status='END' where status='BEGIN';
- commit;
- quit;
I'm using oracle 10g database and SLES 9.0
I've a program which manages my pdf and references. I wish to put some of the information on my website but that program (Mendeley) does export only in XML (or bibtex). I'd like to simply convert the XML output files to SQL in order to create or update an SQL database.I'm not an expert in either XML or SQL (use only PHPMyadmin). Does someone get help me to figure out?
View 2 Replies View RelatedI just installed FC13.It wiped out everything from the previous (FC11) installation. I cannot connect to the existing windows network that was working before. I don't see SAMBA so I downloaded and installed the RPM. I still don't see it on any of the menus. I am trying to connect to the existing Windows network
View 6 Replies View RelatedCan I migrate from fc12 to fc13 or do I have to do a full re-install? If I can migrate, can you point me to the instructions/working paper/etc.?
View 6 Replies View RelatedI am trying to setup VNC server on FC13 box. i am not able to do proper configuration. Can anone point to me a good link which is working. I did many configurations. but no success yet. I have an issue especially with xstartup script. I am running VNC server on Linux and RealVNC viewer on Win Vista OS.When i try to connect to VNC server from RealVNC viewer from Win Vista. It gives error like "unable to connect to host: Connection timed out (10060)"
View 4 Replies View RelatedFollowing this from the wiki: It states Testing shows that upgrading within X will cause X to hang when installing bitmap-fonts-compat, but it can be done anyway by making sure that bitmap-fonts-compat is the last package to update. How do you ensure that its the last package to update?
First install the new fedora 13 gpg key. You may wish to verify this package against [URL] and the fedora ssl certificate.
rpm --import [URL]
Upgrade all packages with
yum update yum
yum clean all
yum --releasever=13 distro-sync
- Testing shows that upgrading within X will cause X to hang when installing bitmap-fonts-compat, but it can be done anyway by making sure that bitmap-fonts-compat is the last package to update ... YMMV.
- Intel video no longer works without Kernel Mode Setting (KMS). You must remove 'nomodeset' from your /etc/grub.conf kernel command line, if present.
- nVidia video no longer works without kernel mode Setting (KMS). You must remove 'nomodeset' from your /etc/grub.conf kernel command line, if present.
- It may be necessary to run "db_recover -h /var/lib/ldap/ ; chown ldap:ldap /var/lib/ldap/*" once in order for slapd to start.
I have FC 13 with both KDE and Gnome loaded. Over the last couple of years of using linux. I've found Gnome better suitable for my needs than KDE and now I'm stuck!
View 6 Replies View RelatedI did a fresh FC13 install on a computer and after trying to install the nvidia drivers the machine hangs on starting atd when it boots.Initially, I tried to install the nvidia drivers with yum but it didn't work. The nvidia module was not loading and although I blakclisted the nouveua driver the machine was still picking it up. Anyway after spending a lot of time trying to find a solution online, I decided to download the drivers from nvidia and install it myself.So I did that, run sh <nvidia-package>.run and the installation was completed without any complaints. Since then the machine hangs when I booted it up. Also I don't see any errors in var/log/messages or in /Xorg.0.logHere is my grub.conf:
Code: default=0
timeout=0
splashimage=(hd0,0)/grub/splash.xpm.gz
[code]....
got my upgraded fedora 14 partition to boot, but I find out that I had to reinstall my nvidia driver, no big deal. seemed to go ok, but now when I go applications->system tools -> terminal I get the "starting terminal" thing on the bar, and then nothing. Can't figure out whats up.
View 4 Replies View Related1.What character instructd the shell to interpret a special character as an ordinary character?
2.What directory contains some of the utilities available on the system in the form of binary files?
3. What command is used to search the location of a utility?
4. What command is used to instruct the editor to write the file and quit the editor?
5. What key quits the more utility and displays the shell prompt?
6. What command starts a child shell as the super user, taking on root's identity and environment?
7. Which wildcard characters can be used for searching all the files in the system that start with "A"?
8. The user name or login name of the super user is????
[Code]....
The updated Kernel 2.6.32.26.175.fc12 (i686) broke nVidia 96xx drivers (nVidia MX-4000 card).Resulted in a quickly flashing cursor in the upper left corner, with no X startup.I removed the driver and let it rebuild using akmod. Still have the same problem.When I revert back to the previous kernel 2.6.32.23-170.fc12.i686, all is well.At this point, wonder what the chances are of this being fixed? Seems the last set of updates before EOL of a release always breaks something critical.
View 6 Replies View Relatedhow to trigger a script when an email is received to update my mySQL database. I do not want to physically send the message to the script, I just want the script to execute and to under execute under a specific mail account.
I thought of setting up a cron job at first, but decided going down that approach would be a huge waste of resources. What method would you recommend?
I have just updated to FC 13 (64 bit), and there seems to be a problem with Jabber in Kopete. I use this to connect to the google talk servers. In FC 12 this was not a problem. However, now I recieve a message "Cannot load the Jabber protocol plugin." when trying to add a Jabber account in kopete. This happens on two separate recently upgraded machines.
I suspect the kdenetwork package shipped with FC 13 is broken in this respect.
EDIT: Updating to the kde packages from the kde-testing repository fixes this, so it looks like the package is indeed broken.
I have a fresh install of FC13, nVidia 9800 GTX+ video card but no 3D.
View 4 Replies View RelatedI have a mivvy l310 netbook. Before I had FC12 on it and I couldn't upgrade (not enough space on /boot, tried all commands and it didn't worked) to FC13. So I said I would do a fresh install for FC13. I used live CD FC 13 iso to make the usb drive (16gb) bootable.It boots, all goes ok, untill the installation is in progress of copying files to my HDD (at this point my HDD is empty, since it was formated). At about half of the progress bar of copying the installation files to HDD it stops with: ""There was an error installing the live image to your hard drive. This could be due to bad media. Please verify your installation media."" I can't go further and install it. I tried making the usb drive on FC13 (finished successfully, on another laptop with liveusb creator) and also on SUSE and it behaves the same.
I also tried second method (described in a thread around here, it worked for me in the past for FC11), by just making the usb drive bootable, using commands in the terminal (here my FC13 kernel, on another laptop crashes, for some commands) and when I try to install I get only: "missing operating system, sleeping forever". For this method, it does not boot at all, so I guess the usb drive is not properly setup. I don't know what else to try. I tried normal dvd iso, live cd, tried making the usb using commands, using live cd, with commands on suse, on FC13 etc...
LE: I found in messages log that I have: zlib_inflate error fc13
LE LE: what's more weird is that I downloaded the same live image of FC13 and burned it on a CD and managed to install it on my other laptop and it worked.
Later update: I tried now with the DVD iso for FC13 and now I get: operating system not found
I have a GeForce 7100 GS Nvidia card (that is, a 2 year old card: not old, not new), that I always used with the kmod-nvidia kernel modules without a problem.But FC13 installs nouveau, drivers for nvidia cards. I tried those, and glx is too slow. Foobilliard and gl-117 games are VERY slow, glxgears shows 400 fps. Is there a xorg.conf trick?
View 3 Replies View Related