Is it possible to delete a panel and move the remaining one in the Fallback Gnome 2-style mode? When I tried it everything seemed locked down.
View 1 RepliesOR IS IT A FEATURE?
I've managed to ALT-RIGHT-click-add some launchers to the top gnome-panel. When i now click on a launcher the gnome-panel crashes(?) and reappeares, but the program starts without problems. If i do this two times in a row (1 sec diff or so) the gnome-crash screen appears and i've got to log out although all the programs are still running without any problems.
dmesg shows this: [14460.034820] gnome-panel[4428]: segfault at 18 ip 0000003810fc05df sp 00007fffcaae4c30 error 4 in libgtk-3.so.0.0.10[3810e00000+3fb000]
i have installed Fedora 15 from USB and it error
Quote:
GNOME 3 Failed to Load
Unfortunately GNOME 3 failed to start properly and started in the fallback mode.This most likely means your system (graphics hardware or driver) is not capable of delivering the full GNOME 3 experience.
.The interface is now Gnome 2. I have not change screen resolution 1280�720, now is 1024x768.
Result of xrandr -q
Quote:
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768
default connected 1024x768+0+0 0mm x 0mm
1024x768 0.0*
just upgraded to gnome 3.0.1 but it started in fallback mode ...! and i really don't know where to go next Here is my kernel version
Code: OpenSuSe 11.4 Linux linux-6rb4.site 2.6.37.6-0.5-default #1 SMP 2011-04-25 21:48:33 +0200 i686 i686 i386 GNU/Linux Here is hardware
System : LapTop HP G62
Processor : Intel® Coreâ„¢ i3 CPU M 350 @ 2.27GHz Ă— 4
Graphic : Intel® Ironlake Mobile GEM 20100330 DEVELOPMENT x86/MMX/SSE2
Using the Nvidia driver from the repo on a Geforce 6800gs. In Kde4 all 3d applications seem to be working properly so I don't know why Gnome 3 is doing that myself. It wasn't working at all at one point and I am assuming that some update or another got it going. Perhaps a repo switch. Unfortunately I am not sure of what those changes may be. I just know that it does run now but only in fallback.
View 6 Replies View RelatedI recently installed Wheezy from a DVD (that was written almost a year and half ago) to my desktop. The DVD install was a minimal one, so after installation I updated the system and installed gnome. But after reboot, my gnome always falls back to gnome-classic.
Code: Select all$ gnome-shell --version
GNOME Shell 3.4.2
$ cat /etc/issue
Debian GNU/Linux 7
l
May be some firmware is missing, so I installed firmware-linux, firmware-linux-free, firmware-linux-nonfree, firmware-realtek, firmware-atheros (last two following a boot time warning). That did not solve the problem, so I just did Code: Select all$ sudo apt-get install firmware-* That also did not solve the problem.
Then I looked into my .xsession-errors file:
Code: Select all/etc/gdm3/Xsession: Beginning session setup...
localuser:somesh being added to access control list
openConnection: connect: No such file or directory
cannot connect to brltty at :0
gnome-session-is-accelerated: No hardware 3D support.
[code]...
I also installed "libgl1-mesa-dri-experimental" from another post I found in this forum.But gnome still falls back to gnome-classic.My hardware is: Core i5-4440, Intel onboard graphics, realtek audio and network.
When I tried the liveCD a while ago, it all worked fine. Now when i do the text install following openSUSE:GNOME 3.0 - openSUSE I just get fallback mode. I cant quite understand why as the machine has an intel 3150 and n550 dual core processor. System - Acer Aspire One D255 - n55- 2gb RAM - 3150 Graphics
View 2 Replies View RelatedThis seems like it should be simple to do. I have a fresh F13 install running Gnome, and the gnome panel is on the left-hand side of the monitor. I want it on the righthand side. So far I have been unable to achieve this. I can't drag the panel (even with ALT held down), and if I try to set orientation to "Right" it changes back the "Left" again
View 4 Replies View RelatedHow do I delete the top panel with gnome? The 'Delete this Panel' option is greyed out.
View 5 Replies View RelatedOS: fed 12
WM: gnome
I would like to remove OR move down the "create folder, launcher etc" so the first button can be Open Terminal. I have used both NACT and nautilus-actions to get the Open Terminal on the menu - but I would like it to be on the top (old habit).
How do I change boot splash in fedora 15 fallback mode.
View 2 Replies View Relatedaccidentally removed my clock and system tray i guess i deleted some applets Im running Fedora 15 Gnome 3 in Fallback modeIs there any way to restore them?
View 1 Replies View RelatedHow do I delete Gnome-panel only without deleting gnome?
View 1 Replies View RelatedHow is do I move a panel from the right hand screen to the left hand screen?
View 4 Replies View Relatedmy problem is that i have tried all what i have found on the net to delete my gnome panel 'cause now i'm using awn
i just dunno what to do it always starts up when i restart my laptop i'm running ubuntu 10.04
i have been trying for around 2 hours searching but all i try nothing works. if i kill it it re-spawns
i tried this gconftool-2 --type=list --list-type=string --set /desktop/gnome/session/required_components_list '[windowmanager,filemanager]'
also this gconftool-2 --type=string --set /desktop/gnome/session required_components/panel 'avant-window-navigator'
but nothing works it always comes back
I am using 64 bit F15 with gnome in fallback mode with compiz.I see the clock in the login screen, but with no changes clock does not show anymore and i can't see the notification area (the four desktops in the right corner as well as the windows name). I have deleted .gconf and .gconfd (that solved a similar issue time ago), but it does not work this time.I have
View 2 Replies View RelatedAfter a great deal of pain I have Fedora 15 running in Virtual Box 4.1 on a older Mac Book Pro running Lion. When I boot Fedora 15 I get a black screen. I can get a virtual console by banging on the fn ctrl option f2 keys I can then use 'startx' to get another black screen but clicking around for a bit gives me the gnome fallback windowing. Is there any way I can force the gnome fallback to start up directly on a reboot?
View 5 Replies View RelatedCurious if there is a simple way to duplicate a gnome panel?for example I have a laptop that I sometimes plug in a 2nd monitor for, when I do I would like to have top & bottom panels duplicate onto the 2nd monitor
View 1 Replies View RelatedI have a maverick box plugged into two monitors, using the open source radeon driver and randr. Each monitor has a top and bottom gnome panel, with various widgets in each. There is no /etc/xorg.conf. The Problem: If I 1) remove both monitors to plug the box into my HDTV, or 2) connect to the X server remotely from a laptop, the panels all get shoved onto the one display. Do you have any advice on how I might specify different gnome panel 'profiles' for the different uses of this computer?
View 2 Replies View RelatedI cannot move panel to top or add extra panel. Is there a way to do this?
View 2 Replies View RelatedDoes anyone knows how to do this for all users with one command?Or which file i have to edit to do this?
View 9 Replies View RelatedI have a bunch of gconf settings that I change by default when I install Ubuntu on someone's machine and thus I've created a script to make it easier after a fresh installation. Here is a list of changes I make so far:
[Code]....
However, I'm looking to remove the top panel and have only the bottom panel like I have set up on my machine. The gconf settings seem to be pretty complex and I'm not sure which keys I should be changing to remove the top panel and include the settings I have currently for the bottom panel (e.g. Menu Bar | Shortcuts | Window List | Notification Area | Clock)
I have just installed Debian Wheezy. However, on logging in for the first time it reverted back to what looks like gnome2. I think this is a graphics card issue...
lspci -v | grep VGA returns:
01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS780L [Radeon HD 3000] (prog-if 00 [VGA controller])
glxinfo | grep OpenGL returns:
OpenGL vendor string: VMware, Inc.
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x209)
OpenGL version string: 2.1 Mesa 8.0.5
OpenGL shading language version string: 1.20
OpenGL extensions:
Is this a proprietary firmware issue and am simply better off disabling the built in graphics card and purchasing a separate card or is there a simple fix for this?
I need the steps to troubleshoot this:
If I:
1. Add drawer(s) on the gnome panel
2. add items to one or more of those drawers
3. reboot then:
1. all empty drawers can operate normally
2. drawers that have stuff in it cannot be opened.
I installed avant-window-navigator and followed these instructions to remove gnome-panel from startup: URL...However I have since uninstalled AWN and now cannot get gnome-panel to load at startup.I think I have put my settings back where they should be -- looking at them in gconf-editor:
1. desktop > gnome > session, the required_components_list is [windowmanager,filemanager,panel]
2. desktop > gnome > session > required_components_list, the panel value is "gnome-panel"
Yet gnome-panel does not load at startup. Any ideas why?Clarification: I can get gnome-panel to load by listing it under Startup Applications, but I am curious why it won't load via the gconf settings.
For Ubuntu 10.04 LTS / Gnome 2.30.2.
I have two applets on my Gnome panel -- NetworkManager Applet 0.8, and Klipper (it works better than Glipper) -- that I want to move.
HOWEVER, right-clicking the panel icons does not enable me to move these applets, as follows:
- NetworkManager Applet 0.8 does not include a Move item in its list of options.
- Klipper displays a long list of Klipper options but no Move option.
How I can move these items to new locations on the Gnome panel?
Instead of moving to trash, how can i make the delete button delete? Delete is already enabled on the right click menu.
View 7 Replies View RelatedI am 3 days new to Fedora 15 and I have just one problem o move the top panelto the bottom but I couldn't find any way to do so
View 5 Replies View RelatedI right clicked on the panel and clicked "New Panel". This actually did nothing the first few times. Eventually it produced a panel on the right side of the screen. When I tried to alt+drag it to move it to my other screen, it won't move. The top and bottom panel do move appropriately.
View 3 Replies View RelatedDoes anybody know if activities panel can be move to the bottom.
View 3 Replies View Related