I have Fedora 10 installed. I've just made an update of my system. Things that were updated were a new kernel version with devel and also something with NVIDIA (which is my video card).
After restart of my system, compiz fusion no longer works.
I have a NVIDIA-Linux-x86-177.82-pkg1.run -file to manually install the NVIDIA-driver so the advanced features of Compiz can be utilized.
After install, the bootup screen tells me that loading the NVIDIA driver has failed. I also receive a WARNING-message.
I've been running a F10 based Samba Server a few months without trouble. Now, after an update, samba is not working any more. When I try to start it manually, it reports the following error:
after updating my machine, my ppp connection stops working. It dial ok, but fail when call the post scripts. Here is the log for the command
Code: ipup ppp0: Code: Jun 29 16:50:42 ricardoalonso ifup-ppp: pppd started for ppp0 on /dev/ttyUSB0 at 460800 Jun 29 16:50:42 ricardoalonso pppd[4516]: Warning: can't open options file /root/.ppprc: Permission denied
Since the last 4 update.. I Been waiting for this to be fix. I can't watch anything without have major problem. I get lest then 3 sec into any video. Then it just jump to were my load point of the video. Almost two week of waiting for this to be fix. Cuz some how my updater form the last 4 Was the reason it went down....
There is a realtek rtl8187 on my board, and windows can browse and connect to wireless networks. I installed F11 and it was capable of browse and connect to my wireless network - even if it was really slower than windows. Anyway I did some yum update+reboots and now NetworkManager don't list any wireless network, and the checkbox "Enabled wireless" in the right click menu disappeared (I can see "Enable networking" only now). What can I do?
i did an update yesterday and after me-tv doesn't work any more, now when i run me-tv i get this error message,Duplicate object id 'hbox1' on line 1220 (previously on line 535)To c if the tunner was working i installed kaffeine and it works fine, so its something related to the me-tv, any ideas how to fix it
Yesterday I ran an update on my Acer Aspire One, which I operate under Fedora11. Amongst the updates was also an update for Qjackctl and the jack audio connection kit. After the update I could not start Qjackctl anymore and all my possibilities with rosegarden and my USB keyboard and fluidsynth were gone. I restored to the system before update ran the update again excluding the two packages concerning jack. Perfect, it works again. So it seems that there is a bug inbedded in the update. By the way, I am quite happy with Qjackctl as the connection tool between my various music making options, which are not very fancy, but I enjoy them. Despite comments in other parts of this forum Qjackctl works very well on the Atom based AAO. I have a kind of protocol of the failure of qjackctl and what I did. I can make that available if necessary
Hotplug of USB not working after yum update.Fedora 11, with KDE4.3.4-1 Kernel 2.6.30.10-105.fc11.i686.PAE.This problem occurred after I ran "yum update" on 28th December 2009, which updated the kernel to the current above version, from 2.6.30.9-96.c11.i686. PAE.Prior to this update, when a USB device(either a scanner, printer, pendrive or camera) was plugged in (hotplug) the device was detected and could be used by the appropriate application. The camera and pendrives were reported by the KDE Device Notifier.
I can mount the pendrive and camera manually, but I cannot use the scanner or printer applications as the devices are not seen.Interestingly if the printer and scanner devices are plugged in/switched on at boot time,they are seen and are usable, eg the Scanner-Tool sees the scanners and the printers print.Logging in as root, exhibits the same symptoms.This feature has occurred on two machines, both after running yum update.Please what has broken with this yum update.How can I overcome this "feature".
I am in Fedora 12KDE and just tried "sudo yum update" from terminal because the graphical updater isn't working. I got a list of files to be updated, but in the things it wants to install as dependencies it lists "gnome-menus" and "gnome-packagekit". If I am in the KDE version of Fedora, why am I getting things that require gnome and how do I figure out which things those are to uninstall them? Did I use the wrong command for the update?
I'm running Fedora 12. After installing the following updates (from yum log):
Quote:
Feb 24 14:34:25 Updated: xorg-x11-server-common-1.7.5-1.fc12.i686 Feb 24 14:34:45 Updated: 1:qt-4.6.2-1.fc12.i686 Feb 24 14:34:50 Updated: compiz-0.8.2-24.fc12.i686 Feb 24 14:34:51 Updated: 1:qt-sqlite-4.6.2-1.fc12.i686 Feb 24 14:35:13 Updated: 1:qt-x11-4.6.2-1.fc12.i686
[Code]....
P.S.: I have another F12 system, on a second HDD, that I haven't updated since two weeks ago and I can connect to the internet with it. So this seems like a package correlation problem. I think it might affect more users than just me, especially those who only have F12 installed on their computers.
If this affects more than just me, I think the guise at Fedora should offer a script or a rpm to be used offline to, whether downgrade the "ppp" package, or to update the "/usr/lib/pppd/2.4.4/nm-pppd-plugin.so" plugin.
I'm using fedora 13, and it's been a while that yum auto-update doesn't pop up.Some time ago, when updates were available, a notification popped up asking for update (and I love this feature because I didn't have to check manually).Under System>Preferences>Software Update i've Daily check for updates and weekly check for major updates, with no automatic installs.And doing System>Administration>Software updates, it load and updates correctly, just it's no longer automatically checked.
I am using F12 for a while now and my laptop has been freeze up from last update. So, I decide to do a fresh install with F12 using F12 net install method.I got it running but comes up with all sort of SELinux AVC denial waring and my firefox does not work and firefox pop up with waring as follow:Quote:Could not initializeapplication's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.Could some one tell me how to fix this problem?he firfox version is 3.5.15-1I ave F12 on T23 LaptopThe kernel is 2.6.32.26-175.fc12.i686.PA1Gb memory with PIII mobile
I am using an NFS to connect my PC running Fedora 10 to a development board running embedded linux. When I installed Fedora 10 everything worked fine. But since I updated the system it gets stuck when the embedded board is looking up the port. I'll explain below...
I set the IP address of my host (my PC) in the embedded board, assigned the locatoin of my root file system to be exported from the host machine, exported by file system on the PC (/usr/exportfs -ra), started (and restarted several times when it didn't work) the NFS service (/sbin/service nfs restart), and boot the embedded board.
The board can successfully ping my PC. It also gets and answer from the DHCP saying it was successfully assigned an IP address (my IP address is...)
However when it gets to the "looking up port" line it gets stuck saying "looking up port of RPC 100003/2 on <my host IP address>"
it times out, and retries on 100005/1 again with no luck.
This all started happening after I ran "yum update".
I checked that rpcbind (which I understand is used now instead of portmap) is running and that my nfs is running using ps. They are both running.
I'm getting to the point where all I can think of is rolling back my installation of Fedora to the non-updated version I have on my ISO. But this means I can't ever run update... I'd rather not do this.
I have verified that all settings in the embedded board remain unchanged and the IP address of my host has not changed as well.
i always run updates if i get prompted about it... this time i ran a couple or so updates and software updates and restarted, i realise my VirtualBox and Wine isn't running at all... i click on the icons but nothing fires up.. all my programs on Wine seem to fall under the same issue...
how do i view all the latest updates i just installed?
My PC has a broadcom wlan adapter. When I clean installed Fedora 15 about two weeks back, the wifi wasn't working on its own. I searched the internet and found out that installing broadcom-wl and akmod-wl would solve the problem. I tried it, and the wifi started working after that.
Wifi not working means there is no wireless option in the network settings and the wifi indicator light is off.. when wifi started working both of these got fixed
Now i did a yum update yesterday, after which my wifi has stopped working again. No use of reinstalling broadcom-wl, akmod-wl, or even kmod-wl...
I have updated FC 11 on my hp 6730b laptop as $ su -c 'yum -y update'after updating I logged to kernel '2.6.30.10-105.2.23.fc11.i686.PAE', but my wireless is notworking any idea how to solve it. I have to solve it offline since I have only wireless internet at my work.
As the title says i updated my system which then needed a reboot. I also installed Mixxx djing software to try it out. So i thought id just restart the system. Usually when i boot into my desktop wireless automatically can connect to my router but not this time, wired only for now... i know theres tons of wireless issue threads but some more experienced users will be able to get straight to the point and run through some diagnostics with me.
I have been looking around the forums searching for similar problems, it seems not only me had this problem. About a month ago I did a regular update via Upd Manager. The next day - no wired connection.Still managable, since the local library has wireless. Now that won't work either.Just after I upgraded from Jaunty, I accidentally removed NetwMngr from the top right corner of the screen, but that should not have anything to do with how the program works, right? I now cannot reach NM, if I run it from the terminal, nothing happens visibly.
I put kmod for nvidia driver on my Fedora 9 ! I update kernel and now when i try to start blender i have this errors :
Code:
blender Compiled with Python version 2.5.1. Checking for installed Python... got it! ERROR: Unable to open Blender window
[code]....
I download blender 2.48 and 2.49 Rc static version ! [URL] But is started old version 2.48a . If i try to start from gnome menu ( graphics ..) blender 2.48a but not working !
I've install F10 to use it as server and router and found a strange problem on my XP machine which is behind the F10. I've tried to update my Lineage2 client from official server but the update crash, tried to open the web page it didn't open. Also tried to open microsoft web it didn't open. When i try to open the same pages on PC with F10 they open with no problem.
