i often got transaction error problems by the package "sqlite" in my fedora x86_64 system.so, i issued rpm -e --nodeps sqlite.
after this,
i am getting,
Code:
There was a problem importing one of the Python modules required to run yum. The error leading to this problem was:
[Code]...
I have configured the Adobe repos and when I try to install Adobe Reader, yum gives me the following error:
Code:
Transaction Check Error: package nss-softokn-freebl-3.12.4-19.fc12.x86_64 (which is newer than nss-softokn-freebl-3.12.4-17.fc13.i686) is already installed I tried --skipbroken as a longshot to no avail. Obviously if I try to remove nss-softokn-freebl it tries to remove all of Fedora , looked in Koji but there is nothing in there either.
This has been happening for over a week and is preventing me from installing updates, They all download OK then as they start to install I get this error message. Test Transaction Errors: package nss-softokn-3.12.4-19.fc13.x86_64 (which is newer than nss-softokn-3.12.4-17.fc13.i686) is already installed Then the update fails and I am unable to continue.
I am a complete noob with this OS, I left for a week in the hope it would sort it's self out.
When I tried to install LibreOffice 3.3_64 on my Fedora14_64 I received the following error:
Package libobasis3.3-extension-pdf-import-3.3.1-8.x86_64.rpm is not signed Has anyone run into this? Is there a way to fix this?
I have a Broadcom Corporation BCM4312 802.11b/g (rev 01) wireless card. I installed these packages:
broadcom-wl-5.10.91.9.3-1.fc12.noarch
akmod-wl-5.10.91.9.3-3.fc12.6.x86_64
kmod-wl-2.6.31.6-145.fc12.x86_64-5.10.91.9.3-3.fc12.8.x86_64
[code]....
uname -a says:
Linux boz.alafkhar 2.6.31.6-145.fc12.x86_64 #1 SMP Sat Nov 21 15:57:45 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
and:
# lsmod | grep wl
wl 1278432 0
lib80211 6436 2 lib80211_crypt_tkip,wl
[code]....
My networkmanager understands that the card is installed. But it can not find any network. Also iwlist scan gives me no result. I did not have this problem on earlier fedora releases. Recently I upgraded to F12 from F11. I should mention that I have another USB DLink wireless card and when I plug it, everything works fine with that card. I also tested wl_apsta driver using fw-cutter. I did not work neither.
I recently upgraded my x86_64 system from FC8 to FC10 using Pre-Upgrade. (related blog link) It appears that the upgrade process installed a steaming pile of i386 packages that are duplicates of existing x86_64 packages. I now get update errors because of this package clash. I have searched the fora and the most progress I've been able to make so far is: I apparently had 8 unfinished yum transactions so I did yum-complete-transaction 8 times and have no more incomplete transactions.
The output of package-cleanup --dupes is not very helpful:
Code:
[tim@servy ~]$ sudo package-cleanup --dupes
Setting up yum
Loaded plugins: refresh-packagekit
Yet I still get transaction errors when I run updates via synaptic. It checks dependencies and downloads everything and errs when testing changes. This is the error it gives at the moment:
Code:
Test Transaction Errors: file /etc/gconf/schemas/gweather.schemas from install of libgweather-2.24.2-1.fc10.x86_64 conflicts with file from package gnome-applets-1:2.20.1-1.fc8.i386
[code]...
The only user that can make the sound card work on a F10 x86_64 system is root. For non root users, I am not seeing any error messages when a app tries to use/access the sound card, just nothing plays. As I said, for root everything works as expected. I am sure this is a permission/setup issue, but I have no idea where to start.
View 3 Replies View RelatedI am trying to install sqlite-python package in my FC11 machine. I couldn't find an rpm to install.
View 2 Replies View RelatedI'm having a bit of trouble with a web server running Fedora 12. Apache works fine, and serves up php content without a hitch. My problem is SQLite -- I thought that it was built into php5, but support is disabled in the repo version. phpinfo shows this as part of the configure command:
Code:
'--without-sqlite' ... '--disable-pdo' ... '--without-sqlite3'
The only solution I've read anywhere is "compile php from source," but I'd like to avoid that if possible, for ease of future upgrades. Is there a way to convince php to use sqlite despite its current state?
Is there a binary available somewhere, even if it's a non-Fedora repo?
View 8 Replies View RelatedHow do I install php-sqlite extension on fedora 14.
View 5 Replies View RelatedToday I got update notification. I type in terminal yum update, and get this error: Quote: Error: Missing Dependency: libnetfilter_conntrack.so.1()(64bit) is needed by package iptstate-2.2.1-5.fc11.x86_64 (installed) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest
I removed iptstate.x86_64, again run yum update, and than, ibnetfilter_conntrack got installed. I tried to install iptstate.x86_64 again, but i get Quote:
[Code]...
I noticed that in Fedora 15 Beta when you choose a minimal install then add ONLY the defaults of the "GNOME Desktop" package, you will get this error: gnome-desktop3-3.0.1-2.fc15.x86_64 has a required package:
system-backgrounds-gnome
When I look for gnome-desktop3-3.0.1-2.fc15.x86_64 it is not on any installation menu list. I prefer gnome, but installed KDE and that worked. Any ideas of getting gnome to work?
Code:
$ su -c 'yum install wine'
this forum won't let me put all the text in Transaction Check Error: package openldap-2.4.21-6.fc13.x86_64 (which is newer than openldap-2.4.21-4.fc13.i686) is already installed package nss-softokn-freebl-3.12.4-19.fc13.x86_64 (which is newer than nss-softokn-freebl-3.12.4-17.fc13.i686) is already installed
Fresh install of F13, just went to update and I get the following error:Code:failure: repodata-primary.sqlite.bz2 from updates: [Errno 256] No more mirrors to try.
View 7 Replies View RelatedI try to do virtual guest in red hat linux 5.
But I have no red hat netowrk account .
I want to download below package
xen kernel-xen package
So, where I can get them ?
can anyone please tell me which package provides the gnome system monitor applet (the one which can display cpu load and disk I/O in the tray)?I run XFCE on F14/x64 and would like to display it using the XfApplet.
What i've tried already:
*) Installed the "GNOME Desktop Environment" --> Nothing changed
*) did a yum provides "/usr/lib64/bonobo/servers/*" to check which packages are providing applets - didn't found anything which sounds like the system monitor applet
The XfApplet shows up a bunch of available applets but not the system monitor ...
Fedora (2.6.34.6-47.fc13.x86_64) I installed that update, during the installation process it said that it had to remove three packages, one of them was kmod nvidia for the old kernel (Fedora (2.6.33.8-149.fc13.x86_64))After the update finished installing the new kernel, I restarted the system and Nvidia did not load. (I assume because Update manager removed the old nvidia? But I also assumed that a new version would be installed automatically?)I received the following Boot messages:
Code:
Entering non-interactive startup
Starting monitoring for VG vg_user1: 3 logical volume(s) in volume group "vg_user1" monitored
[code]....
I'm confused, if Update Manager removed kmod nvidia, then why does yum say it is installed? And why doesn't the new kernel update work with that version? Or should I install a driver version for that particular kernel? I've read while searching that I need to install a kmod-nvidia for that particual kernel version and that I should login to my previous kernel until that happens, is that the problem I'm having?
Why don't rpmfusion and fedoraproject release the kmod-nvidia and kernel updates at the same time to avoid problems such as this? Does anyone know how long does it usually take for rpmfusion to release the new kmod-nvidia driver for the latest kernel?
Keep trying update the packages (36 in total) and every time I keep getting this error
ERROR with rpm_check_debug vs depsolve:
kernel-x86_64 is needed by kmod-nvidia-2.6.26.6-49.fc8-173.14.12-5.fc8.2.x86_64
kernel-x86_64 is needed by kmod-nvidia-2.6.26.8-57.fc8-173.14.12-5.fc8.3.x86_64
Please report this error at [URL]
this error happen while installing wine for fedora 15 x86_64 using yum extender, the same problem also happen when installing it using terminal
10:57:02 : ERROR: Dependency resolving completed with errors
10:57:02 : ERROR: Protected multilib versions: 2:libpng-1.2.46-1.fc15.i686 != 2:libpng-1.2.44-3.fc15.x86_64
I would like to report that at time of writing the package pan-0.134-x86_64-1.txz is shipped with -current 32 bit. It's not mislabeled, I think it's the actual x86_64 package:
Code: $ pan bash: /usr/bin/pan: cannot execute binary file
I just installed Fedora9 in my desktop. The installation was successful and it was doing security update and system update right after install. After all the update service finished, I do a manual update to see what happy (Sysem>Administration>Update System). It keeps coming up with Package Error with the message "failed to get a TID: Incorrect path with ';' returned!".
View 8 Replies View RelatedI use FC 10 on my desktop. It is great!. But I have some troubles with installing new software via yum or rpm. Most of install/update/upgrade transactions fail. The yum prints string: Error: Missing Dependency: glibc-common = 2.9-2 is needed by package glibc-2.9-2.x86_64 (installed) I tried to manually install or update the glibc-common via yum or rpm, but it fails. The # uname -a -i -p returns
Code:
Linux achfc10 2.6.27.5-117.fc10.x86_64 #1 SMP Tue Nov 18 11:58:53 EST 2008 x86_64 x86_64 x86_64 GNU/Linux Could you have any ideas how to solve the issue?
Bit of a shot in the dark, but I don't suppose that anyone has/knows of an x86_64 rpm for Gnome-globalmenu? Compiling the source is proving to be a real pain
View 3 Replies View RelatedI was on version 2.6.29.6-217.2.3.fc11.x86_64 and it asked me to update so I did. When I restarted I chose this version to install and after a brief loading screen it goes to a black screen with a cursor prompt and pretty much stays there. So I go back to 2.6.29.6-217.2.3.fc11.x86_64 which boots up just fine. But after a while I get some updates that won't install because it says that Packages are not compatible:Install - Linux Kernal 2.6.30.5-43.fc11(x86_64)
ERROR with rpm_check_debug vs depsolve:
kernel-uname-r = 2.6.27.19-170.2.35.fc10.x86_64 is needed by kmod-nvidia-2.6.27.19-170.2.35.fc10.x86_64-180.29-1.fc10.1.x86_64
[code]....
I have been unable to burn CD's / DVD's while logged into FC12 with a full GDM session or with just the Gnome Greeter running. If I drop to single user mode and use wodim I can burn w/o issue.
GDM 2.28.2
KERNEL 2.6.32.9-70.fc12.x86_64
I am having problems with then new banshee. It won't start.
I tried
Code:
No go
I still get the following error:
Code:
Runnig under root gives no problem and the previous version ran without problems.
On a fresh installation of F12 and F13 I have had issues getting the multimedia codecs working properly. I have followed the tutorial that I was pointed to and it doesn't seem to work..
[URL]
There is a note in there that reads as follows:"NOTE: There is significant variation depending on your architecture (i386, x86_64, ppc). This step is really only beneficial to 32bit i386 users."
What is the step for the x86_64 users? Are there special codecs I can't find on the net that I need to be installing? Should these just be extracted in the /usr/lib64/codecs directory?
codec installation for x86_64 F13.
I am posting from my brand new F13 x86_64 system. I am, however, having some problems to get the system fully online with the software I use (I couldn't even update) because YUM (terminal, yumex, etc) is painfully slow. I am behind a really fast connection so I know the problem lies outside.
Is there some method to force YUM to use the fastest repo available? Ok, or at least to try another one?
I created an EC2 instance with Fedora 12 x86_64 about a month ago. I have been getting an hourly system log error:mcelog: Cannot open /dev/mem for DMI decoding: No such file or directoryI was ignoring it because I did not notice any implications, until now.I am running MongoDB on this machine, and reads from /dev/urandom are failing. I know reading from /dev/urandom shouldn't fail, so I think this system error may be the underlying problem.Are these two issues connected?If so, is there a way to fix this without having to completely reinstall the OS?
View 5 Replies View Related
