I am having problems with then new banshee. It won't start.
I tried
Code:
No go
I still get the following error:
Code:
Runnig under root gives no problem and the previous version ran without problems.
Attempting to compile an application that is not located in any of the repos yet for 11.3 64 bit. I have downloaded the appropriate src and untarred it. However, when I attempt to run the ./configure command here is the error I receive. checking build system type... Invalid configuration `x86_64-unknown-linux-': machine `x86_64-unknown-linux' not recognized configure: error: /bin/sh ./config.sub x86_64-unknown-linux- failed
I have made sure that I have all kernel-headers packages installed and am unsure as how to proceed. I tried using the command "./configure --build=x86_64" and then receive an error stating that the "SYSTEM IS NOT SUPPORTED" and continued errors stating that gcc is not installed, eve though it is.
I have a strange problem when I do SSH to a FEDORA9 based Linux Server.
[Code]....
When I login using "adah" username in TELNET I am automatically directed to my home directory at location "/media/disk-1/home/adah". But when I use SSH to login using the same username I get the following message Code: Could not chdir to home directory /home/adahaj: Permission denied
I am running Folding with the multi-core High performance client and would like to set this to be a service rather than have to run it by hand, so to speak, when the machine is booted.
How do I go about setting a service up for this.
Fedora (2.6.34.6-47.fc13.x86_64) I installed that update, during the installation process it said that it had to remove three packages, one of them was kmod nvidia for the old kernel (Fedora (2.6.33.8-149.fc13.x86_64))After the update finished installing the new kernel, I restarted the system and Nvidia did not load. (I assume because Update manager removed the old nvidia? But I also assumed that a new version would be installed automatically?)I received the following Boot messages:
Code:
Entering non-interactive startup
Starting monitoring for VG vg_user1: 3 logical volume(s) in volume group "vg_user1" monitored
[code]....
I'm confused, if Update Manager removed kmod nvidia, then why does yum say it is installed? And why doesn't the new kernel update work with that version? Or should I install a driver version for that particular kernel? I've read while searching that I need to install a kmod-nvidia for that particual kernel version and that I should login to my previous kernel until that happens, is that the problem I'm having?
Why don't rpmfusion and fedoraproject release the kmod-nvidia and kernel updates at the same time to avoid problems such as this? Does anyone know how long does it usually take for rpmfusion to release the new kmod-nvidia driver for the latest kernel?
Keep trying update the packages (36 in total) and every time I keep getting this error
ERROR with rpm_check_debug vs depsolve:
kernel-x86_64 is needed by kmod-nvidia-2.6.26.6-49.fc8-173.14.12-5.fc8.2.x86_64
kernel-x86_64 is needed by kmod-nvidia-2.6.26.8-57.fc8-173.14.12-5.fc8.3.x86_64
Please report this error at [URL]
How I can get an RPM package for the latest version of Banshee. I am struggling with the installation from source code. I tried for about an hour yesterday before giving up. Just when I thought I had cleared up all the dependencies yet another one came up in the ./configure. I am fairly new to Linux/Fedora. I love the concept of the package repositories, but it does get difficult when the software is not in the repos. Are there repos out there that have newer versions of software that don't make it into the base repos?
View 2 Replies View RelatedJust wondering, but does anyone out there know when we could expect to see Banshee 1.8 for Fedora 13. I'm getting tired of being stuck with 1.6.
View 2 Replies View RelatedWondering if its possible to have a User's home folder that resides in a different partition (could be ntfs or ext). I don't mean mounting /home on a different partition. The home directory will still be available for adding more users but I'd like to have a specific User's folder away from /home
How can one achieve this?
Just did a fresh install of Fedora 10 and install Banshee. The problem is it wont start. I get 'Banshee has encountered a fatal errorError details:
Code:
An unhandled exception was thrown: Could not load type 'Banshee.ServiceStack.ServiceManager' from assembly 'Banshee.Services, Version=1.4.0.0,
[code]...
I use FC 10 on my desktop. It is great!. But I have some troubles with installing new software via yum or rpm. Most of install/update/upgrade transactions fail. The yum prints string: Error: Missing Dependency: glibc-common = 2.9-2 is needed by package glibc-2.9-2.x86_64 (installed) I tried to manually install or update the glibc-common via yum or rpm, but it fails. The # uname -a -i -p returns
Code:
Linux achfc10 2.6.27.5-117.fc10.x86_64 #1 SMP Tue Nov 18 11:58:53 EST 2008 x86_64 x86_64 x86_64 GNU/Linux Could you have any ideas how to solve the issue?
Bit of a shot in the dark, but I don't suppose that anyone has/knows of an x86_64 rpm for Gnome-globalmenu? Compiling the source is proving to be a real pain
View 3 Replies View RelatedI was on version 2.6.29.6-217.2.3.fc11.x86_64 and it asked me to update so I did. When I restarted I chose this version to install and after a brief loading screen it goes to a black screen with a cursor prompt and pretty much stays there. So I go back to 2.6.29.6-217.2.3.fc11.x86_64 which boots up just fine. But after a while I get some updates that won't install because it says that Packages are not compatible:Install - Linux Kernal 2.6.30.5-43.fc11(x86_64)
ERROR with rpm_check_debug vs depsolve:
kernel-uname-r = 2.6.27.19-170.2.35.fc10.x86_64 is needed by kmod-nvidia-2.6.27.19-170.2.35.fc10.x86_64-180.29-1.fc10.1.x86_64
[code]....
I am running banshee-1.5.3-1.fc12.i686 on FC12 X64. Although the Banshee iPod plugin is checked off, when I plug an iPod in, I do not get the iPod icon on the left pane of Banshee. (gktpod works fine with my iPod.) How do I fix this?
View 7 Replies View RelatedI have been unable to burn CD's / DVD's while logged into FC12 with a full GDM session or with just the Gnome Greeter running. If I drop to single user mode and use wodim I can burn w/o issue.
GDM 2.28.2
KERNEL 2.6.32.9-70.fc12.x86_64
On a fresh installation of F12 and F13 I have had issues getting the multimedia codecs working properly. I have followed the tutorial that I was pointed to and it doesn't seem to work..
[URL]
There is a note in there that reads as follows:"NOTE: There is significant variation depending on your architecture (i386, x86_64, ppc). This step is really only beneficial to 32bit i386 users."
What is the step for the x86_64 users? Are there special codecs I can't find on the net that I need to be installing? Should these just be extracted in the /usr/lib64/codecs directory?
codec installation for x86_64 F13.
I am posting from my brand new F13 x86_64 system. I am, however, having some problems to get the system fully online with the software I use (I couldn't even update) because YUM (terminal, yumex, etc) is painfully slow. I am behind a really fast connection so I know the problem lies outside.
Is there some method to force YUM to use the fastest repo available? Ok, or at least to try another one?
I created an EC2 instance with Fedora 12 x86_64 about a month ago. I have been getting an hourly system log error:mcelog: Cannot open /dev/mem for DMI decoding: No such file or directoryI was ignoring it because I did not notice any implications, until now.I am running MongoDB on this machine, and reads from /dev/urandom are failing. I know reading from /dev/urandom shouldn't fail, so I think this system error may be the underlying problem.Are these two issues connected?If so, is there a way to fix this without having to completely reinstall the OS?
View 5 Replies View RelatedI am a total Noob, I couln't find the answer to my question anywhere. I need to run Matlab with 4GB of RAM and I have been told Fedora 64bits is the best environement for that. I downloaded the iso for the Fedora 14 x86_64. I first booted using the live CD and was surprised to see that only 3.4GB are recognized. The computer is a HP with dual core 64bits intel cpus and the motherboard is supposed to handle until 8GB of RAM, I have currently 2 x 2GB installed.
I thought it might have been a problem from the live CD and I proceeded to install, but still same problem, only 3.4GB recognized. Most threads I have found mention the PAE kernel but from what I understand this only applies to 32bits Fedoras ?
I'm bring up a new Fedora 14 server, retiring my Solaris 10 x86 server. While I'm waitng for SATA cables to arrive for the RAID configuration, I decided to try and install opera (which I've been using for years and years). I downloaded the opera-10.11.gcc4.shared.qt3.x86_64.rpm. But, when I try and install it, I get the following problem (rpm -i):
[Code]...
i just installed fedora 9, but realized that i had installed the x86 version (it came on a dvd in linux format magazine). i didn't know that the "only-3gb-of-ram-for-x86" applied to linux, as my previous machines i used it on had under 3gb anyway. so anyway, is there a way to switch to the x86_64 version without downloading and reinstalling it? kinda like ubuntu's distro upgrade (not sure if other distros have it?)
View 4 Replies View Relatedstrace wget www.google.com:
...
write(2, "Connecting to www.google.com|74.1"..., 51Connecting to www.google.com|74.125.115.104|:80... ) = 51
socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 3
[code]....
i want to put LISA working under my x86_64 but i receive a error because the fault of cpp wich i have in the /lib, so i don't understand that fault
checking for g++... no
checking for c++... no
checking for gpp... no
checking for aCC... no
[Code].....
I had quite a bit of trouble getting OSS4.2 and flash to have sound on x86_64 fedora 11. I had been using the Adobe repository which is 32bit. Adobe labs distributes a 64 bit version, and I notice now that Leigh has packaged it for fedora. Switching to the 64bit flash plugin brought back sound in flash for me. Just wanted anyone else wanting to try OSS4.2, to know how to get sound in flash.
View 1 Replies View RelatedThe latest update changed the default boot from 0 to 1 and added extra parameters to the new kernel boot line.
default=1
timeout=8
splashimage=(hd0,7)/boot/grub/splash.xpm.gz
# hiddenmenu
title Fedora (2.6.31.6-145.fc12.x86_64)
root (hd0,7)
[Code]...
Has anyone gotten DAAP sharing to work between Itunes 9 and Banshee? I have a Windows Vista, Mac OS X, and Fedora 12 box setup on my network. Both Mac and Visa have itunes 9 running on them, and when opening Banshee the Itunes Library shows under shared music but when I select it; I get the below error:
Unable to connect to music share
* The provided login credentials are invalid (I removed the share password, same issue)
*The login process was canceled
*Too many users are connected (not the case)
* The music is hosted by itunes 7 (hosted by itunes 9)
Is the Banshee DAAP plugin supported with Itunes 9? Are there any work arounds?
I have just installed Fedora 12 on my old AMD64 desktop. The install went fine, I then set about adding various useful things like skype, flash plugin- some manually, some with autoten.
Upon rebooting, the system hangs. Looking at the text startup, the last line before it hangs is:
Starting jexec servicesStarting yum-updatesd: [OK]
After this line appears, the display flashes repeatedly then does nothing. It sits there with the text showing (or on graphical startup, the splash screen disappears) and a cursor flashing.
I think the problem may be with the nvidia driver I installed with autoten, which I suspect is wrong for my system (think my graphics card is too old).
Does anyone know how I might remove the driver given I can't get as far as logging in at the moment? Or am I wrong and the problem likely to be something else?
I want to run Fedora 12 x86_64 on my 2x500GB RAID0 setup, how would I do this via the BIOS method (I want to dual boot Win7 off the same RAID array) with an AMD SB750 southbridge? I'd prefer not to go software, but if I have to I can and just use the 1TB for 7. (I'd prefer not to as the 1TB is a hotswap drive, mostly from PC to External case)
Note: I don't actually have the 1TB Hard Drive or BluRay drive yet, they're still on order)
I searched, but all the results were for Intel's ICH10R or SB600, computer specs are in sig, if there's anything else just say.
You may or may not of heard of this project. But I have made an RPM to install this software. This software was developed by Rohan Anil and his project is on [URL]..This will install the module and try (still a few bugs here) and set up GDM.(Removed from FC12 onward in case program stops working) You can find it here.[URL]...Or you can set up my repo with this[URL]..and install using. yum install pam-face-authentication-gdm or using add remove software utility.Setup notes:
Make sure you run qt-facetrainer to set up your face. If you can not see the camera window on login you may need to set SELinux to permissive.
Check /etc/pam.d/gdm-password
Make sure that ..
auth sufficient/lib/security/pam_face_authentication.soenableX
is before
auth substack password-auth
To set up su to use pam-face-authentication add at the top .
[Code]...
I'm having no sound and no flash workin on my newly updated F12 kde x86_64 desktop, I could get back sound by yum removing pulseaudio, but installing flash ( thru mjmwired instructions), get pulseaudio back installed.
View 3 Replies View Related