On a fresh installation of F12 and F13 I have had issues getting the multimedia codecs working properly. I have followed the tutorial that I was pointed to and it doesn't seem to work..
[URL]
There is a note in there that reads as follows:"NOTE: There is significant variation depending on your architecture (i386, x86_64, ppc). This step is really only beneficial to 32bit i386 users."
What is the step for the x86_64 users? Are there special codecs I can't find on the net that I need to be installing? Should these just be extracted in the /usr/lib64/codecs directory?
I've just installed Fedora 12. I Love it. But .. how to install a codec package so I can watch movies? (.avi, Xvid etc.....) for Movie Player (default installed).
I've downloaded a package called "all-20071007.tar.bz2" that suggests it is just what I need.
I created a folder called "codecs" in usr/local/lib/" as su using the terminal as pkg instructions suggested.
When I tried to unpack the package into that new directory I got the reply that I did not have the right permissions.
Has anyone else imstalled this/or better codec packages?
How do I overcome this problem
ps if there's another/better video player, I'd like to know too, so I can try it out also.
I installed Fedora 10 on a Toshiba Laptop, where I had been successfully running Ubuntu for over a year. The newest iteration of Ubuntu was giving me problems, and the press was saying that Fedora 10 was pretty good, so I tried it.
Fedora 10 froze after any application was loaded. I couldnt correct it. I installed Fedora 9, and am no longer having that problem. However, I cant run any multimedia items on the computer. Particularly videos, including wmv, mpeg, or rm formats. This was not a problem in Ubuntu. I can't find any player or codec that will allow me to play these videos on Fedora 9. Can anyone suggest a solution for this?
I am posting from my brand new F13 x86_64 system. I am, however, having some problems to get the system fully online with the software I use (I couldn't even update) because YUM (terminal, yumex, etc) is painfully slow. I am behind a really fast connection so I know the problem lies outside.
Is there some method to force YUM to use the fastest repo available? Ok, or at least to try another one?
Fedora (2.6.34.6-47.fc13.x86_64) I installed that update, during the installation process it said that it had to remove three packages, one of them was kmod nvidia for the old kernel (Fedora (2.6.33.8-149.fc13.x86_64))After the update finished installing the new kernel, I restarted the system and Nvidia did not load. (I assume because Update manager removed the old nvidia? But I also assumed that a new version would be installed automatically?)I received the following Boot messages:
Code:
Entering non-interactive startup Starting monitoring for VG vg_user1: 3 logical volume(s) in volume group "vg_user1" monitored
[code]....
I'm confused, if Update Manager removed kmod nvidia, then why does yum say it is installed? And why doesn't the new kernel update work with that version? Or should I install a driver version for that particular kernel? I've read while searching that I need to install a kmod-nvidia for that particual kernel version and that I should login to my previous kernel until that happens, is that the problem I'm having?
Why don't rpmfusion and fedoraproject release the kmod-nvidia and kernel updates at the same time to avoid problems such as this? Does anyone know how long does it usually take for rpmfusion to release the new kmod-nvidia driver for the latest kernel?
Installing f10 on an x86_64 platform from CD or netinst. I can't seem to find a way to have it install i386 compatible (32-bit) software at the same time. Is there a repo that has to be enabled? In f8 i think it was just a box to click somewhere.
I have downloaded Fedora 11 x64, and I went to the adobe website and downloaded the tar.gz file for flash player. I went into the terminal to untar the file and after I did that I tried to install it and got this error :
ERROR: Your architecture, 'x86_64', is not supported by the Adobe Flash Player installer. What does this mean? My dad could get his to install but his is 32 bit.Do I have to wait until the full version is out?
I've tried to upgrade with prepupgrade and also to boot from F11 DVD, but just after anaconda starts, it hangs. (Just about when X starts) Maybe my hardware isn't supported yet or something but I can't find out. I don't find any anaconda log-file or anything to give me a clue what goes wrong.
Recently I tried to install Fedora 12 x86_64 to my laptop. I ran the live fedora image from my cooldisk and then pressed "Install to Hard Drive" from live desktop. Then I went forward until I reached the partitioning section. Though I had ~28GB free space in my Harddrive, but it says: "Could not allocate requested partitions: not enough free space on disks." You can see my steps until reaching this problem in these 3
pics: step1: step2: step3:
I captured these steps by using Fedora 12 Live printscreen tool. I tried to install Fedora12 from its non-bootable DVD too, but no difference! So there's only 2 situations:
1. I did something wrong -> install Fedora and use its partitioning tool. 2. There's a bug in Fedora -> confirm that this is a bug and say me an alternative way to install fedora.
I'm having trouble installing Fedora 13 (64 bit) onto my new laptop (Thinkpad T510). I've repeatedly tried the following three methods:
1) LiveCD I can boot into the LiveCD okay, and all hardware is detected. Double clicking on "install to hard disk" makes the disc spin a bit, but then it stops and nothing happens. At the same time the "application loading" cursor is displayed for a couple of seconds, then goes back to normal. Otherwise it acts as if I never clicked on the icon.
2) DVD The installation process goes as normal until it has finished formatting the hard disk. It then says an unhandled exception occurred, but gives no other info in the "details" section (it's blank). Pressing CTRL+ALT+F3 actually shows a description of the exception:
Code:
DBNoSpaceError: (28, 'No space left on device -- /tmp/storage.state: unable to flush page: 5') Pressing CTRL+ALT+F4 shows a constant stream of error messages starting with "ERR kernel:" which are scrolling too fast to read. 3) BFO (boot.fedoraproject.org)
[code]...
Pressing CTRL+ALT+F4 shows a constant stream of error messages starting with "ERR kernel:" which are scrolling too fast to read. I've used methods 2 and 3 to install Fedora on two other machines (with the same installation media as I'm using now) within the last week. The laptop is brand new and seems to run Windows okay (as well as Fedora from the LiveCD). I've tried resetting the BIOS to the defaults but that didn't help.
I am going to set up a home server (command line only) with 2 x 1 GB HD and 4G memory. hat partitioning scheme would you recommend? Not more than 5 users Fedora Core only Will host a web page Will run DNS, DHCP, SAMBA, LAMP, NTP, Firewall, etc.. Just normal stuff.The server will host a large amount of video/audio/picture files
Target hardware is a Sager NP8170 laptop which uses an Intel core i7 CPU and the HM67 chipset. This laptop uses UEFI instead of BIOS. The laptop is configured to boot from the USB ports before booting from the optical drive and then the hard drive. The software I am trying to install is Fedora 15 x86_64. I want to perform the install using a USB drive. I do not want to use DVD media.
how to create minimal boot media as detailed here: [URL] Using dd, efidisk.img has been transferred to a 256MB USB disk. efidisk.img is about 103MB so it fits. I figured this USB drive would boot and take me to a command prompt of some sort but nothing happens. I see activity on the USB drive (flashing light) but then it stops and the laptop boots from the hard drive which currently has Windows on it.
There is $&*# for information on installing to a UEFI system. I don't even know if this efidisk.img USB drive is supposed to present me with a command prompt and from there I can kick off the Fedora installer from another, larger USB drive or the network or whatever. I really don't want to go back to optical media. Also, I burned the F15 x86_64 ISO to a DVD and that DVD does boot. I did not think the stock Fedora DVD version would boot on a UEFI system.
When attempting to install FC12 x86_64 on a Dell Optiplex 760, my USB devices stop working after initial boot. I see anaconda, but am unable to change anything since my keyboard, mouse and any other USB devices are not powering up after kernel boot.
Attempting to compile an application that is not located in any of the repos yet for 11.3 64 bit. I have downloaded the appropriate src and untarred it. However, when I attempt to run the ./configure command here is the error I receive. checking build system type... Invalid configuration `x86_64-unknown-linux-': machine `x86_64-unknown-linux' not recognized configure: error: /bin/sh ./config.sub x86_64-unknown-linux- failed
I have made sure that I have all kernel-headers packages installed and am unsure as how to proceed. I tried using the command "./configure --build=x86_64" and then receive an error stating that the "SYSTEM IS NOT SUPPORTED" and continued errors stating that gcc is not installed, eve though it is.
I am having some trouble with xine, and because of this I cannot get any media player to work. When I try to play mp3's in Amarok, nothing happens and the song does not play. When I try to open xine, it opens a window that says
The stream 'There is no MRL' uses an unsupported codec: Video Codec: MPEG 1/2 (0x0) Start playback anyway?
OpenCV doesn't work. I wonder why would anyone create a RPM package and not bother to check whether it actually works? Do they get paid per package at Red Hat? The problem seems to be in cap_ffmpeg.cpp. Somehow, OpenCV cannot resolve the ffmpeg CODEC libraries, but the annoying part is that it compiles and installs error free - it just doesn't work. Without any error messages, it is really hard to figure out what is wrong.
There is no sound card listed in "lspci" and also I receive this error when I use dmesg command: [15.012010] AC'97 0 does not respond - RESET [15.012017] AC'97 0 access is not valid [0xffffffff], removing mixer. [15.012024] Unable to initialize codec #0
I would like to know if anyone has installed the latest NVIDIA driver on Ubuntu 10.04 (64-bit) which is 256.35 (x86_64).
I am currently having some problem (unstable) with the previous release 195.36.31 (x86_64) and am now considering updating; but, am still reluctant because of possible problems during the installation process.
I do not see any 32 bit packages in the /tmp/transitRPMS directory, which good, and that is is what I expected / want.I have also downloaded the repodata and images directory from one of the CENTOS mirros, from the 5.6 directory.I am using the netinstall CD to kickstart the VM and using my local HTTP repository , which I created using the RPMs pulled from the yumuploader command.When I try to install the VM, after the disks are formatted, the installer starts asking for missing i386 or i686 packages. This is happening in both interactive installs, where I select absolutely no package; and also in the kickstart installs, where I have specified @core for the packages. I am unable to understand this behaviour. It was not so in CENTOS 5.5 x86_64 bit. I do not want to install 32 bit packages on my 64 bit machine.
Keep trying update the packages (36 in total) and every time I keep getting this error ERROR with rpm_check_debug vs depsolve: kernel-x86_64 is needed by kmod-nvidia-2.6.26.6-49.fc8-173.14.12-5.fc8.2.x86_64 kernel-x86_64 is needed by kmod-nvidia-2.6.26.8-57.fc8-173.14.12-5.fc8.3.x86_64 Please report this error at [URL]
I use FC 10 on my desktop. It is great!. But I have some troubles with installing new software via yum or rpm. Most of install/update/upgrade transactions fail. The yum prints string: Error: Missing Dependency: glibc-common = 2.9-2 is needed by package glibc-2.9-2.x86_64 (installed) I tried to manually install or update the glibc-common via yum or rpm, but it fails. The # uname -a -i -p returns
Code: Linux achfc10 2.6.27.5-117.fc10.x86_64 #1 SMP Tue Nov 18 11:58:53 EST 2008 x86_64 x86_64 x86_64 GNU/Linux Could you have any ideas how to solve the issue?
Bit of a shot in the dark, but I don't suppose that anyone has/knows of an x86_64 rpm for Gnome-globalmenu? Compiling the source is proving to be a real pain
I was on version 2.6.29.6-217.2.3.fc11.x86_64 and it asked me to update so I did. When I restarted I chose this version to install and after a brief loading screen it goes to a black screen with a cursor prompt and pretty much stays there. So I go back to 2.6.29.6-217.2.3.fc11.x86_64 which boots up just fine. But after a while I get some updates that won't install because it says that Packages are not compatible:Install - Linux Kernal 2.6.30.5-43.fc11(x86_64)
ERROR with rpm_check_debug vs depsolve: kernel-uname-r = 2.6.27.19-170.2.35.fc10.x86_64 is needed by kmod-nvidia-2.6.27.19-170.2.35.fc10.x86_64-180.29-1.fc10.1.x86_64
