Fedora :: Shrinking Disk Partition In Fedora Makes NTSF Partition Unusable
Aug 5, 2011
I am completely new to Linux in general, and have recently downloaded Fedora 15 KDE spin. I tried dual-booting between Windows 7 and Fedora by shrinking one of my Windows partitions (I have two, this partition not containing the Windows installation). I tried shrinking it to 30 GB less than the total space available on the partition, and after pressing continue, received an error (which I unfortunately dismissed quickly and can't remember). In the file manager, Fedora showed that my partition changed from 1.3Tb to 1.2 Tb, but I couldn't access it. Upon rebooting into Windows, I still can't access it, receiving a "format drive before use" popup and then error stating that it is possibly of a different filesystem or corrupt.
Unfortunately, I stupidly didn't backup any of my data (which I will be sure to remember to do in the future). I installed EASEUS Partition Master 8.0.1 Home Edition, which states that my drive is still of NTFS filesystem and has the total space it should. However, upon clicking "check drive," it states there are no errors and when trying to "explore files," it doesn't find any (yet it shows the correct amount of used and unused space). I then tried running TestDisk, but only allows me to check my media drive E, which is my dvd drive that has my Fedora Live CD in it (which cannot be ejected manually or through Windows, an error stating it cannot be ejected). I didn't go through with TestDisk for my DVD drive because I needed to verify the type of partition (which to my knowledge shouldn't even exist). It shows 700 something MiB / 600 something MiB. Although I have decent general knowledge about computers, I am a complete novice when it comes to doing something like this.
View 1 Replies
ADVERTISEMENT
Dec 3, 2009
How can I shrink a LVM2 partition in fedora 12 in order for me to install another distro. thank you
View 1 Replies
View Related
Apr 26, 2011
I shrinked the /home partition using resize2fs command by 1GB and what had happened to remaining my free space .
View 1 Replies
View Related
Mar 26, 2010
I'm trying to samba share my NTSF partition in slackware 13. I chose for root to have read/write access only.
How can I change this to allow samba share for my regular non-root account?
View 1 Replies
View Related
Aug 16, 2009
I have just over 20GB of empty space on C:. When I click it under disk-management, the window comes up and says I can only resize it 192 MB less than what it is. But I have 20GB free. Any ideas on what is wrong? I also have this odd 9.56GB partition that is empty. DM says it's "EISA configuration"...whatever that is. I am planning to allocate about 10GB for F11 if this pans out ok.
View 6 Replies
View Related
Nov 22, 2010
Im trying to shrink a 80 Gb ntfs partition. but when i clicked the shrink option the partition is like this:
"sda1(ntfs,0 mb)".
how to free up space in creating custom layout.
View 1 Replies
View Related
Jul 2, 2011
i had installed fedora 14 into my new hardisk(1500gb) as new server the problem is how can i use the fdisk to partition the hardisk into two partition.
View 10 Replies
View Related
Jun 18, 2010
I am using an Nvidia GeForce FX5200 card and nvidia hasn't released a driver that seems to work with it in Fedora 13 yet.. However, I decided to do an install of F13 and use the nouveau drivers until Nvidia updates their drivers, however, the nouveau drivers don't work worth a crap with my card I did a fresh install and then ran a yum update. What I am seeing is after a few minutes, all the icons disappear, no fonts, and nouveau starts throwing errors to my message log. Here are the messages I get:
[Code]...
View 2 Replies
View Related
Jan 19, 2010
I have two hard drives, a 320GB and a 1.5TB. The first hard drive has two windows partitions. The first one is the main vista partition and the second one is one for factory restore (its an HP pavilion).
So wanted to install both ubuntu and ubuntu studio on the second hard drive, so I allocated about 1TB as an ntfs partition that I wanted to be accessible by both vista and ubuntu. So I have 400GB left for both distros. I have partitioned off two 40GB partitions for the two roots and I'm sharing one large home parititon and I put a swap partition at the end of the disk.
After I got through the second installation (ubuntu studio) vista no longer recognised the ntfs partition on the second disk. I thought maybe the install botched the boot sector, so I used testdisk to try to fix it, but it hasn't done any good. I do not want to format the second drive again because I have data on there I transferred over from an old hard drive before I installed ubuntu.
I tried to 'initialise' the disk in vista, but that just wiped the partition table so I had to fix that with testdisk on a live cd
Does anyone have any idea how i could possibly fix this problem or what winblows is thinking? I want to be able to read the partition in windows.
Code:
View 2 Replies
View Related
Jan 18, 2010
I did a horrible mistake due to lapse in my concentration. Here is the 80 GB IDE disk geometry:
=> C: Windows XP SP2 15 GB partition
=> D: NTFS parition - 10 GB
=> E:F:G:H: NTFS partitions on the Windows Extended partition.
=> On the same Extended partition, there exists Linux /swap and /root partitions.
What happened was:
a) I wanted to delete the H: parition which was residing adjacent to Linux partition
b) By mistake I opened the Explorer and clicked the Mouse on H: partition and left it like that (forgot)
c) I opened Add/Remove program list but did nothing, to do few uninstalls after partition deletion.
d) Now I opened compmgmt.msc for Disk Management then deleted the H: partition!
Then XP reacted strangely and got almost hung
e) Then I switched OFF and ON the PC.
f) Most shocking was GRUB screen vanished (crash console appears) which means that Linux partition got deleted instead of H: partition!!
It's important to share with you that Fedora Core 12 possess the default BOOT flag. I thought that it's nothing big deal, only a case of Boot flag toggle with DOS bootable CD but am shell shocked to find after hitting the fdisk from DOS it says Error reading the disk!!! I felt like collapsed for a while, don't know how I did such a mistake. how to boot into my Windows XP. I can't afford to loose data or bear the expense on Data recovery
View 14 Replies
View Related
Apr 14, 2011
I recently decided to resize a partition on my HDD (partition on which Ubuntu was previously installed).This was in order to remove Ubuntu from one of my HDD. I got rid of the Grub loader by booting on my windows system recovery disk and using Bootrec.exe/FixMbr and my computer now boots directly into windows. I then deleted the Ubuntu partition.
To get to the heart of the problem, I am trying to move the free space that is in the extended partition out and merge it with C. I tried doing this with my Gparted liveCD but it didn't work. I didnt have anything to save the error message onto, but I will try the process again when I get home and save the error onto my external drive so that I can post it here.
View 7 Replies
View Related
Dec 1, 2010
I am a new user of Linux, and I actually had a task that is the ability to resize (specifically Shrink) storage of Virtual Machine, I was thinking that the best to start on is to know how to resize partition in linux using command line since our VM runs in Linux environment.
View 7 Replies
View Related
Jan 15, 2010
im trying to shrink my vista partition with gparted inside ubuntu. I run gparted (and yes i have ntfsprogs) but when i select the ntfs partition and select move/resize it brings up free space preceding... new size... and free space following.so when i input the new size the resize/move button greys out and when i change the freespace following it just puts back my original new size and back and forth.from what i have read i need to run the gparted livecd and go from there. is this true? i know how to do it with diskpart in windows, how to in ubuntu and eventually get rid of windows.my system is 64-bit. [URL]
View 5 Replies
View Related
Oct 26, 2010
I have been attempting to set up a bunch of partitions on a bunch of hard disks, in preparation for installing Maverick. I will be setting up a number of RAID partitions, so I will install from the alternate disk (ubuntu-10.10-alternate-amd64.iso). Now ever since they added support for GRUB2 and a new partition type and align-to-megabyte and a whole bunch of other goodness, partitioning has been buggy. This has been true for Maverick and Lucid. Even the 10.04.1 version (an Ubuntu LTS!) still has problems. Every time I try something else, some other bizarre bug rears its ugly head. (Yes, I have been reporting them on Launchpad when I find a new one.)
In order to move forward on this project, I have been using a variety of partitioning tools. I temporarily installed Maverick on a small partition, and have used Disk Utility (palimpsest) and GParted while booted into that. Occasionally when things get really strange I boot up the latest version of System Rescue Disk, which contains the latest version of gparted. I use these various tools to try out various partitioning schemes, just laying out empty partitions that will be formatted or assembled into RAID arrays later. When I get all the desired partitions set up, I will boot into the alternate installer and do the final installation. (I don't want to do the entire thing within the alternate installer because it makes my head hurt. I do have a lot of partitions.) This has been going on for weeks now. Every time I try something different, something weird happens, and I have to try various workarounds, or switch to different tools. Basically, my partitions eventually become unstable.
Here's the latest mind boggler: Disk Utility displays nice graphical maps of your partitions. This image includes before and after screenshots showing what happens to my partitions occasionally. We start with three primary partitions and one extended partition. The extended partition goes all the way to the end of the disk. We put a small logical partition into the extended partition, at the beginning of it. We can then click on the "free" portion of the extended partition and create additional logical partitions if we like.
Afterwards, the extended partition has magically shrunk itself down until it is the same size as the small logical partition it contains. The free space has migrated out of the extended partition, and is now useless, as you can't have more than four primary+extended partitions. Disk Utility won't let you create another partition. What happened between the Before and After pictures? I don't know. I do know that I did not ever tell any tool to change the size of any partition. Moving or resizing partitions can trigger various known bugs, so I never even try to do that, I just delete partitions and start over.
View 3 Replies
View Related
Apr 5, 2011
I have serwer Debian with my website. My provider splited the disc into 5GB partition for / and 495GB partition for /var. Everything was going ok for over two years but now I don't have enough memory on /. I'd like to increase the partition but the problem is that /var is just next to it so I can't easily change the end of the first one. I need some safe solution. It might be even just shrinking partition for /var, adding new one after if it helps anyhow (I have about 450GB free memory).
Some outputs
Code: # df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda1 5201536 5173904 0 100% /
tmpfs 1023464 0 1023464 0% /lib/init/rw
udev 10240 2672 7568 27% /dev
tmpfs 1023464 0 1023464 0% /dev/shm
/dev/sda2 478812280 10336484 444345032 3% /var
overflow 1024 4 1020 1% /tmp
# parted print
GNU Parted 2.3
Using /dev/sda
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) print
Model: ATA ST3500418AS (scsi)
Disk /dev/sda: 500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 512B 5369MB 5369MB primary ext3 boot
2 5369MB 500GB 494GB primary ext3
3 500GB 500GB 538MB primary linux-swap(v1)
View 2 Replies
View Related
Jun 10, 2011
I've installed fedora on my PC by reducing the existing NTFS partition and installing Fedora on free space at the end of the disk. Now I'd like tho enlarge fedora's partition. How can I do this? If I just move the partition back in disk, can I boot normally on fedora?
View 14 Replies
View Related
Aug 14, 2009
I'm a subscriber of a Linux magazine who sends me 2 dvds of Linux distros each month. I wanna try some of those just for some time pass. The issue is that out of 52 GB partition on which Fedora 11 is installed, 42 GB is free. I want to have around 10 GB space from that 42 GB so that I can install CentOS 5.3. how shall I partition my disk?
View 7 Replies
View Related
Nov 28, 2009
First of all I am a long time Fedora user and now I need help getting it on my laptop. It has Windows 7 loaded (no Windows cd) and a 500GB dynamic disk. I shrunk and re-partitioned but Linux can't see the partition I made for it. I want to save Windows and had this brainwave lol. I was wondering if I could copy c:*.* to a USB drive; delete partitions and re-partition with basic partitions. Then install Linux on say the third partition; then using Linux copy Windows files from the USB onto the new C partition. Then using my Recover dvd's repair Windows. Great idea right? But I bet it won't work; any thoughts?
View 3 Replies
View Related
Jul 13, 2010
Using a small hard drive (180 GB) dual booting windows XP for gaming and Ubuntu 9.10 for my other stuff during install I didnt know how much of each partition i would use, so i did 50-50 1 for ext3 and one for NTFSHowever after awhile it seems I have run out of space on my NTFS and have tons of unused space on my ext3.What I am wanting to do is shrink some of that ext3 down and give it it NTFS, I did a little searching and found a couple of old posts but I was a little sketchey on em. Simply looking for some personal Methods or Tools you have used and a starting point of how to use them.
View 5 Replies
View Related
Sep 8, 2010
I have nearly 200GB of space free on the HD with my linux main EXT4 partition, and I'm wondering if I can convert a large part of this to a new NTFS partition that I can use for my windows XP paralell install?
Basically, what do I have to do to resize and create the new partition and how do I get windows to recognize it?
View 5 Replies
View Related
Aug 23, 2010
In an attempt to shrink my Data partition on my 500GB drive I had succeded in shrinking it but I think I have broken the partition table as now it refuses to mount. When trying to mount I get this error mount: wrong fs type, bad option, bad superblock on /dev/sda2 I have done some searching around but most fixes haven't worked because they are based on ext2/3 File systems and this partition is ext4. Using Ubuntu 10.04 x64.
View 2 Replies
View Related
Dec 6, 2010
HP Netbook Mini 210
F14 xfce
I installed F14 xfce and using the entire disk.
Code:
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 97G 4.0G 92G 5% /
tmpfs 494M 212K 494M 1% /dev/shm
/dev/sda1 485M 49M 211M 11% /boot
/dev/sda4 193G 8.5G 175G 5% /home
After I have installed all my programs, I need to install windows and I need visual studio. So I was thinking of taking 20 GB from the /home directory and using that for windows. I can use gparted. However, many posters on here think it is best to use gparted by booting from the disk. However, I cannot do this, as I don't have any DVD drivers. And I can't really afford to buy one just for this reason. What is the best way to do this?
View 2 Replies
View Related
Jul 18, 2011
I got a new hard drive 2TB for extending the storage. I am working on fedora15 and would like to format the disk as a linux partition and external hard drive. me how to format this disk and partitioning!
View 12 Replies
View Related
Feb 14, 2010
I have a clean install of Fedora 12 and trying to mount a second hard disk with data created under Fedora 8. Nautilus lists the hard disk and can see all the folders and files under Places > Computer. However, Nautilus only lists hte hard disk (/dev/sdc) but no partitions (e.g. sdc1, sdc2) under Filesystem. LVM shows Partition1, Partition2 and UnPartitioned space under /dev/sdc. LVM shows Partition2 as 'uninitialized Disk Entity /dev/sdc2'. If I try to 'Block Initialize' Partition2 (which is the largest listed partition), LVM warns all data in the partition will be erased. A partition with all the data is on the hard disk because Nautilus can see it but the partition is not listed under /dev/sdc so I can mount it.
View 7 Replies
View Related
Mar 4, 2010
I'm using Fedora 12 since 2 years lately, I really enjoy this S.O., it's quite robust and wonderful, but a couple of months ago it is really slow to boot up when startup the computer, I've checked everything, but seems to be ok, I had a partition lost arround that date, but recover successfully, it happens when I run gparted that It cannot see partition on my 500 GB disk, but still boots up. When running Mandriva live cd, it can see (?) all partitions on that disk, even with Fedora Dolphin I can access this partitions. What could it be?
View 6 Replies
View Related
Oct 4, 2010
I have a 80GB HDD on which I have installed Ubuntu10.04. I have about 45GB space remaining. I am trying to install Fedora13. I create : 2GB / partition - 2.4GB swap partition. I want to create 6GB /usr partition and it says not enough disk space? Why is it giving that message?
View 1 Replies
View Related
Mar 9, 2009
Background for the problem:
A. I have partitioned my WinXP LTop into:
--- WinXP NTFS partition
--- a vfat partition (mounted onto /fat32)
--- Installed F10 on ext3 virtual partition
B. I do not want install grub-loader in the Master Boot Record (that would loose my WinXP boot-loader for ever)
C. I have installed grub boot loader in the First Boot Sector
D. Now I have to boot using Rescue Mode, do:
1. dd if=/dev/sda2 of=/fat32/linux.bin bs=512 count=1
2. mount -t ntfs /dev/sda1 /ntfs
3. cp /fat32/linux.bin /ntfs
4. modify /ntfs/c/boot.ini and introduce the statement 'c:linux.bin="Linux"'
Problem: Im not able to do step D.2 above.
Symptom:
** after booting linux using the Rescue Mode: sh-3.2# chroot /mnt/sysimage sh-3.2# uname -r 2.6.27.5-117.fc10.i586 sh-3.2# mount -f ntfs /dev/sda1 /ntfs FATAL: Could not load /lib/modules/2.6.27.5-117.fc10.i586/modules.dep: No such file or directory ntfs-3g-mount: fuse device is missing, try 'modprobe fuse' as root
sh-3.2#
Observations:
* The rescue mode boots into i586 based kernel (I dont know what is the actual difference between i586 and i686 - will really appreciate if anyone can educate me about it). * The installation is only a i686 image and consequently there is *only* '/lib/modules/2.6.27.5-117.fc10.i686' dir and *no* other dir. There is no dir as xxxx.fc10.i586.
View 13 Replies
View Related
Nov 4, 2010
I want to add Fedora 14 to my triplecore 3GB RAM computer which has windows, Fedora 12 & ubuntu installed. What are the recommendation (e.g. size) for harddisk partition allocation? I can reuse the swap partition, can't I? Should I install Fedora 14 to a single partition (ie. /)? Should I use only ext4?
[Code]...
View 1 Replies
View Related
Feb 23, 2011
I had a drive with a partition layout like so:
~50gig Windows 7 - NTFS
~100gig Ubuntu - EXT3
~100gig Snow Leopard - HFS+
~100gig Extended Partition
-- ~100gig Swap Disk - exFat
I wanted to delete the Snow Leopard partition and format the Swap Disk partition to something else. exFat was causing major file size bloat on small files. QT sdk bloated to like 11 gigs or something ridiculous like that. Anyways, I loaded up an Ubuntu 10.04 LTS live cd and gparted then deleted the Snow Leopard partition. Gparted said "Mission Accomplished" and tried to rescan the drive, but never found it. At this point I restarted the computer, a dell laptop, which didn't boot with an unable to find a bootable device error. The ubuntu live cd doesn't see the drive anymore. gparted scans for drives indefinitely and fdisk -l has no output.
View 9 Replies
View Related
Nov 26, 2010
I have newly created filesystem on one of my partitions. After that I am not able to paste anything into it. What is the reason?Even after mounting it also?
View 12 Replies
View Related
