I am following the instructions on Section 8.1.* Device Driver ConceptsHere I was able to proceed till section 8.1.4.After making the hello.c file,the make file and patching the Kconfig as mentioned,I tried to run the $ make ARCH=ARM CROSS_COMPILE=xscale_be- gconfig This gave error as:make: *** No rule to make target `gconfig'. Stop.I am not sure if my kernel is correctly compliled,but I was able to complie and build the kernel for arm before by cloning the kernel and building from the following link without any error. https://omapzoom.org/gf/project/omap...ux+OMAP+Kernel
I want to upgrade my kernel from version 2.6.38-10 to 3 I downloaded the kernel 3 from kernel.org by this command :wget url while i'm in /tmp directory
and i did these commands also
$ tar -xjvf linux-2.6.25.tar.bz2 -C /usr/src $ cd /usr/src
till now everything is okay so now the next step as my manual
$ make gconfig that's give me this result * * Unable to find the GTK+ installation. Please make sure that * the GTK+ 2.0 development package is correctly installed... * You need gtk+-2.0, glib-2.0 and libglade-2.0. * make[1]: *** No rule to make target `scripts/kconfig/.tmp_gtkcheck', needed by `scripts/kconfig/gconf.o'. Stop. make: *** [gconfig] Error 2
and the gtk+ is installed correctly but don't know what's wrong exactly .
I have an old notebook on which I would like to install Fedora 15. Because the normal requirements of Fedora 15 are prety high I would like to install the command-line version (so without GNOME/KDE). I was wondering what the requirements of the command-line only version would be. Would it run on a 650MHZ PIII, 128mb RAM system? If so how do I install a command-line only version?
I was reading the fedora Disk requirements and it said you need 9 GB of disc space. Which partition should this 9 GB of space be on? I plan on having a / root partition, /home partition, a swap partition, and a /boot partition.
Quote: 1.2.3. Hard disk space requirements for all architectures The complete packages can occupy over 9 GB of disk space. Final size is entirely determined by the installing spin and the packages selected during installation. Additional disk space is required during installation to support the installation environment. This additional disk space corresponds to the size of /Fedora/base/stage2.img (on Installation Disc 1) plus the size of the files in /var/lib/rpm on the installed system.
In practical terms, additional space requirements may range from as little as 90 MiB for a minimal installation to as much as an additional 175 MiB for a larger installation. Additional space is also required for any user data, and at least 5% free space should be maintained for proper system operation. [URL]
checking for GLADE... configure: error: Package requirements (libglade-2.0 >= 2.4) were not met:I can't find this file, I tried running yum install libglade and it worked, but it won't accept it.Package libglade2-2.6.4-1.fc11.x86_64 already installed and latest version.
configure: error: Package requirements (purple) were not met:No package 'purple' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables PURPLE_CFLAGS and PURPLE_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. What am I supposed to do from here? I know libpurple is installed but the package "purple" doesn't even exist. The application I'm trying to install is called gFire by the way.
how I can make desktop effects work on F11. it used to work on F10. Now I get the garbled screen every time I enable it on gnome.Google search said to disable the metacity composite manager using gconf-editor but I'm not sure I know how to do it. When I type in gconf-editor it just opens a blank configuration screen . It would be better if someone one can help me how to do it probably on the command line, also what is the equivalent of xorg.conf on F11.
I have a .rar file called Japanese, and every time I enter the command "unrar e Japanese.rar", I get the response "Cannot open Japanese.rar No such file or directory No files to extract".
I've done everything on this site, but I can't get it to extract. What do I have to do to make this work? Do I need to set the directory or something? I've seen other people mention that as a solution for other problems, but have no idea how to do it.
I've just installed LAMPP on F11 I wanted to share the process to make Xampp work on linux (fedora) 64 bit.
1- Download Lampp : [URL]../en/xampp-linux.html#374 2- log as root, and unzip the archive file in "/opt" : it is installed ! 3- to launch lampp : log as root (or sudo), and use "/opt/lampp/lampp start"
You should have error messages ! So do the following : - modify "/opt/lampp/lampp" : comment this part of the script [URL]..it-rhel.html):
# XAMPP is currently 32 bit only #case `uname -m` in # *_64) # if /opt/lampp/bin/php -v > /dev/null 2>&1 # then # : # else
How do I make ntlmv2 and 128 bit encryption work with Samba. i.e. I have a Win 2008/Win7/Vista box with standard settings i.e. forced using ntlmv2 and 128 bit encryption that I want to connect to a Linux server running Samba (RHEL6 in this case). Now if you google you it says Samba should support ntlmv2 with settings like this:
lanman auth = no ntlm auth = no client lanman auth = no client ntlmv2 auth = yes
However even with 128 bit encryption turned off on the Win box it still doesn't work. We use "security = server". Is it maybe a requirement that we need to use security domain instead for ntlmv2 to work? Reading further in man smb.conf.5 "client ntlmv2 auth = yes" is "This parameter determines whether or not smbclient will attempt to authenticate itself to servers using the NTLMv2 encrypted password response." so clearly it's not affecting our samba server.
Reading even further in man smb.conf.5 it says "If this option (lanman auth), and ntlm auth are both disabled, then only NTLMv2 logins will be permited". Why is it then that you need to force NTLM auth in Win2008?
NTLMv2 is only compatible with "security=domain". This means that even if you set "lanman auth=no", and "ntlm auth=no" it will still only auth with NTLM... Here is the Q from Andrew Bartlett * "Use 'security=domain'. NTLM2 session security is not compatible with 'security=server'."
In order to use "security=domain" you need to use the net command to join the windows domain and for that you will need the AD administrator account password which you will most likely not have. However the question still reminds if you would to join the domain would the NTLMv2 work over 128 bit encystations or would you need to disable that one still?
Trying to make sense of this Linux stuff, by trying to install Fedora 14. First impressions are it?s a parallel universe populated by those who hark back to the era of Windows 3.1 / DOS, and earlier, where command line instructions and messing around with .ini files was all the rage. Which might all be a great little hobby to go back to, being more 'at one, and intimate' with my machine and learning a new skill to take some pride in, but all it means so far is my patience is being really tested by needing to learn it all from scratch!
The installation guides seem to suggest that if your graphics card is not good enough then the installation will default to the text based one. Which is what happened in my case. I can get to the login prompt after the installation, but that's the point where it gets really frustrating in having my machine think it?s a mid 1980s Commodore 64 or something!! Never mind PEEK and POKE, I just want to THUMP or KICK it.
I read somewhere I should start X Start to start the GUI. Nope, x start or xstart doesn't do anything. I then read that only works if I had installed X Windows. Can't find where or how I install X Windows though! I then read, as I say, things default to purely text if your graphics card is not good enough, but then I can't find anything about what the minimum spec is. Seems odd that a card that can cope with Windows can't work with a system as basic as linux/fedora with its frustrating command line-intensive way of working.
- what the minimum graphics card spec is to enable GUI? - how to install this X Windows thing?
My wireless adapter stopped working randomly the other day. I think the last time it was working was right before I put the computer into hibernate for the first time. it stopped working even after restarting.modinfo p54usb shows (I'm leaving out information that seems irrelevant because I can't copy and paste without the internet, so I'm typing what I see from another computer)
firmware: isl3887usb firmware: isl3886usb
dmesg | grep firmware doesn't seem to show any requests for firmware related to it. lsusb shows something like
bus 002 device 001: ID... linux foundation 1.1 root hub bus 001 device 003: id... linksys wusb54g wireless adapter
[code]....
When I start up, in boot messages I get something like this
WARNING deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. WARNING all config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release Device wlan0 does not seem to be present, delaying initializtion [FAILED]
I am having trouble loading my sound drivers after removing pulseaudio. (Yes, I did try and reinstall pulse, did it again with ALSA, no luck).
It appears that my sound drivers are not loaded, because cat /proc/asound/cards returns 'no soundcards' and aplay -l returns the same... the ouput was quite different before, I am sure I DO have soundcards and they did work before in Fedora 14.
Any Ideas how can I make the sound drivers load again ?
How to make the modem lights toolbar addon to work? They don't seem to work while online with Gnomes KPPP, and it would be nice to see them working while online.
I have installed Xampp on Fedora 11. After that I have gone to Mozilla Firefox Browser and wrote [URL].. on the address bar but it is not supporting Xampp, when I opened Konqueror Browser and wrote [URL].. on the address bar it is supporting Xampp and showing everything of Xampp. Now, is there any way to make Mozilla Firefox Browser work for Xampp?
My network is windows pppoe. How can I configure it for Fedora 11? Is there any graphical configuration tool available for that? Also, ubuntu 9.04 logs into pppoe network after restarting as I've made some changes in /etc/network/interfaces. Is there any option available for Fedora 11 to automatically log in to pppoe network after restarting?
I am trying to make a d-link dwl-650+ pcmcia card work through ndiswrapper method following the direction at:[URl]... The first step there is to install the "kmod-ndiswrapper" via yum.
But, how would I just download this package to a usb drive so that I can transfer it to the laptop that needs wireless networking. Is there an option in yum where I can just download the package, not intstall, so that I can save it somewhere?
I cannot right click with my mouse on the gnome applications menu to get the properties/edit menu option. This is on F12 on 64bit. Instead I get: "help, remove from panel, lock panel". I dont have this problem with anything else on the top bar.
---------- Post added at 12:33 PM CST ---------- Previous post was at 12:21 PM CST ----------
Turns out I have to install package alacarte and then go to System > Preferences > Main Menu
Intel just pushed out a new driver that speeds up performance on certain chipsets. Has anyone here tried it yet? I've tried compiling but run into a weird error :
Quote: checking for XORG... no configure: error: Package requirements (xorg-server >= 1.6 xproto fontsproto randrproto renderproto xextproto x11 xextproto) were not met: No package 'x11' found
The only user that can make the sound card work on a F10 x86_64 system is root. For non root users, I am not seeing any error messages when a app tries to use/access the sound card, just nothing plays. As I said, for root everything works as expected. I am sure this is a permission/setup issue, but I have no idea where to start.
I recently upgraded from fc8. I am running two nvidia NVS 285 cards with four monitors and using nvidia driver 190.53-pkg1. I have one card up and running and can edit the config file and make to other two work I just can't get all four to work together.