Fedora :: How To Disable / Enable Gstreamer
Jun 23, 2010
how to disable gstreamer???? (and be able to re-enable it also?) i don't want to totally remove gstreamer - as it is required by alot of software. however, when i am using
proaudio apps with low-latency having gstreamer enabled is a problem. this is because ( i think ) that my crappy intel-hda (STAC9200) only has one sub-device, while many other cards have multiple.
so when gstreamer is there, i will get more xruns, and a nasty message in dmesg, something along the lines of "intel-hda switching to polling mode". overall performance of the card will suck. BUT! if gstreamer is NOT there, i can run low-latency(2ms) with pretty much no xruns(jackd). the only time i get the odd one is if i am switching drum banks in a wine VST.
well, i remove pulseaudio when i install Fedora, gstreamer doesn't work properly after that, you can't use rhythmbox, or anything. but you will get much better latencies and generally the card is very useful. ie: i can manipulate many sounds/samples/synths in realtime, or actually record in ardour with a decent load...
View 10 Replies
ADVERTISEMENT
Jul 30, 2011
Sorry but I'm a new user and would like to know how to enable/disable firewall. I have tried to open a port up on my firewall but, for some reason that didn't work. I have found these command in another thread: $ sudo /sbin/chkconfig iptables off
$ sudo /sbin/service iptables stop
I assume this is to disable the fire wall. How do I enable it once I'm finish running my program.
View 13 Replies
View Related
Jul 28, 2011
So back in May I built a really sweet new box for my desktop running Ubuntu and put my old one out to pasture as a Fileserver running Squeeze. Well I have a very large DVD collection (900 disks 400 or so titles) that I'm trying to get ripped to hard disk for my popcorn hour. LONG STORY SHORT. When I put a dvd into what should be headless, keyboard-less, and mouse-less fileserver to use vobcopy with it starts up Totem (gstreamer) and loads the dvd menu. ARGGG. I then have to plug in all the hardware, close it, and go back to just using my desktop because it's less of a headache. How can I disable Totem from being a poopy pants and loading every DVD I put in the drive?
View 1 Replies
View Related
Jan 17, 2010
In Fedora 11, we could use from:
System -> Administrators -> Software Source
for enable or disable repositories, by Check boxes. For example we disable rawhide or testing repositories! But in fedora 12 I don't see it in System -> Administrators -> Software Source! How I can enable or disable repositories, by Check boxes in Software Source?
View 5 Replies
View Related
Feb 23, 2011
Enable:
Code:
gconftool-2 --type string --set /desktop/gnome/session/required_components/windowmanager "compiz-gtk"
Disable:
Code:
gconftool-2 --type string --set /desktop/gnome/session/required_components/windowmanager "metacity"
Log out and log back in
View 2 Replies
View Related
Jan 24, 2011
eCouldnyone help me out to put the right configuration parameters in the grub.conf file so I can enable or disable the Fedora Logo on boot time ?
Currently I'm seeing 3 bars being filled on boot time. I need to get back the Fedora Logo during the boot time process.
How can I do this?
View 10 Replies
View Related
Sep 12, 2009
how to enable and disable these services: FTP,Email,Web server,Firewall,Telnet,LAN? Is there any general way to manage services?
View 1 Replies
View Related
Jun 25, 2011
When installing Samba and Webmin I use the application "system-config-services" or (if it is easier to find for you that way) menu->Administration->Service management. In this application I can start the services I need (nmb, smb, webmin), but the enable/disable at startup setting is greyed out... Even when I start the application as root it still gives me no possibility to configure the services to start up on boot. This should be possible. It works this way in Fedora 13 and Fedora 14, so why not in Fedora 15?
Before reporting a bug, I would like to ask if other users here have the same problem (and -if possible- a solution)... In the mean tim I guess it is back to the old way of configurating services - sigh..
[edit] I tried to remove the [SOLVED] from the title, but the forum software does not seems to allow me to do that... I thought it was solved by installing xinetd, but I was happy a bit too early. I still have no answer for this problem.
View 6 Replies
View Related
Feb 20, 2009
I want to get a software like synaptics in windows,it can easily disable and enable touchpad.in linux is there any?
View 14 Replies
View Related
Apr 3, 2010
Error: GStreamer error: Internal GStreamer error: negotiation problem. Please file a bug at url. Additional information: gsturidecodebin.c(1563): setup_source (): /GstPlayBin2layer/GstURIDecodeBin:uridecodebin0:
Can't link source to decoder element
i get this error when i look in the error console
View 3 Replies
View Related
Mar 29, 2011
I was trying to convert a flac audio to mp3 using soundconverter & its failing with the error:
Quote:
GStreamer error: Gstreamer encountered a general stream error.
I should note that the flac is a rip of an actual Mono Vinyl disc. Am not exactly sure how that was done but I was interested in converting some those files to ogg & mp3. OGG conversion doesn't give any error.
Below is the result when launching soundconverter from the terminal & trying to convert the flac file(s) to mp3 (i just tried ogg to mp3 & the same error occurs):
Code:
$ soundconverter
SoundConverter 1.4.4
using Gstreamer version: 0.10.28, Python binding version: 0.10.18
using gio
[Code].....
View 6 Replies
View Related
Jun 13, 2010
I've downloaded from the Ubuntu software center a touch-pad application that allows me to set some preferences to my touch-pad. So since I rather use a mouse, I've disabled it, the problem is, it only keeps disabled for a few minutes, later it works again. So I want to keep disabled until I enable it again, any suggestions?
View 3 Replies
View Related
Jul 19, 2011
is there a way to enable/disable specified hardware? Allow me to explain, i have 2 wireless adapters, one integrated and one USB, i want to use the USB adapter for 5Ghz 802.11n and the integrated wifi adapter in my system is the one ubuntu is defaulted to.. i have the drivers for the USB device already installed i just need to disable the integrated device.
View 3 Replies
View Related
Sep 16, 2010
know whether it is possible to disable +5V supply on USB and enable it again?
View 4 Replies
View Related
Feb 1, 2011
I have 4 computers and I currently have 4 USB cradles so every time I want to switch to a new computer I have to unplug the keyboard/mouse dongle and replug it in the appropriate cradle. I would prefer to connect the single dongle to a 4 way USB switch then choose the target computer by remapping 4 of the keys I don't need, for example:
View 2 Replies
View Related
Aug 24, 2010
I want to make a kernel module that its function is like ifup/ifdown. However I could not find any way to do that.
View 2 Replies
View Related
Sep 16, 2010
how to disable/enable easystroke with commands like
Code:
easystroke --enable [--disable]
View 4 Replies
View Related
Jan 12, 2011
Anyway, according to the release notes, RHEL 6 has a PAE enabled kernel by default. Great... But that leaves me wondering why uname report SMP. Further, I'm provisioning some systems for QA use, and they're asking that PAE is disabled. My thinking is that since RHEL 6 requires PAE capability to install, there may be no way to disable it and the googling I've done seems to support this. tl;dr Why does a default kernel with PAE enabled report SMP on RHEL 6?
View 7 Replies
View Related
Nov 27, 2010
Since last Saturday (11-20) my touchpad enable/disable key stopped working.I don't make much use of the touchpad and it usually stays disabled most of the time so I can't be sure it is really on Saturday that I lost this functionality or maybe the day before (I'm positive it's not longer than that).Before that it worked flawlessly, now it's like a dead key (which is not broken by the way, tested on a live CD).In these past week I have been looking for quite some time for other users who might have experienced this problem after the update of two specific packages (console-data and keyboard-configuration) I had on the 20th and which made me think might have broken the key binding.Not finding anything at all and after having tried for said packages both newer versions from sid and previous known-to-have-worked-before versions from the install CD, I started thinking the problem was not there (I consequently restored the testing ones).
The days before this happened I tinkered a little bit with gpointing-device-settings and tpconfig (this last one was a simple tpconfig -i), but at this point I start thinking there might have been something else I've done, somewhere else I can't recall probably.
Oh, I forgot to mention that the touchpad still works flawlessly, I can enable/disable it through gconf (actually I made two handy shortcut to the "/desktop/gnome/peripherals/touchpad/touchpad_enabled" value), so it is not an issue of making it work, just the toggle key which on my laptop is a dedicated one (no Fn modifier) and anyway all the other special keys still work fine.I checked gnome-keybinding-properties and there is no action for the touchpad there, but I don't know for sure if there was one before (and I haven't been able to add one). Anyway in gconf I noticed a key in "/apps/gnome_settings_daemon/keybindings/touchpad" has the value "XF86TouchpadToggle", not sure if that means the keybinding exists or what.
What more can I add? What I'm here to ask now is some guidance on figuring out what I might have done wrong considering what I was able to tell you, but mostly, considering what I wasn't able to tell you and am not even aware to have done.
View 6 Replies
View Related
Jul 2, 2011
I'm looking for some definitive instruction on the proper way to enable/disable (not to simply start/stop or add/remove packages) services/daemons under Debian 6. Google results are all over the map and, surprisingly, the Debian wiki has no abstract on services.It seems like such a common task
View 14 Replies
View Related
Nov 22, 2010
I have a computer that runs debian 6, and i want to make a dual boot system where i can boot either with or without desktop. AS default the server will be booting in console (headless) mode (and act as server) but on some occasions i do want to bootup in desktop.
I know starting GDM (in my case the desktop manager) is just a simple task, but i would like to have 2 options in boot menu:
1 - without desktop default (timeout 5 seconds)
2 - with desktop
what would be the correct grub config entries?
View 1 Replies
View Related
Oct 6, 2010
Basically what I'm wanting to do is only have one USB keyboard connected active/enabled at any given time. i.e., enable B1D14 and disable B5D2, then enable B5D2 and disable B1D14. I'm actually wanting to enable/disable at the root hub. Something analogous to mount/umount a device instead of a file system.
ramack@ramack2:~$ lsusb
Bus 005 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 014: ID 413c:2106 Dell Computer Corp. Dell QuietKey Keyboard
Bus 001 Device 012: ID 0781:5544 SanDisk Corp.
Bus 001 Device 006: ID 058f:6254 Alcor Micro Corp. USB Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
View 2 Replies
View Related
Apr 6, 2010
Can somebody tell me how to enable/disable a pci slot.I am trying to do a hotplug on the pci slot.Is it possible in Open SUSE? If its possible can somebody please tell me how to do it.I was doing some research and went over the following topics hwup, hwdown, sysfs, but nothing worked.My confidence on Linux OS is pretty high and am sure there should be a way!
View 1 Replies
View Related
Mar 22, 2010
I am able to get my touchpad to enable disable from the bash shell using
Code:
sudo modprobe -r psmouse with or without the "-r" to turn it on or off, respectively But I wanted to write a script to do this for me because "mouseon" and "mouseoff" is easier for me to remember and more convienient. But I am having some issues (I am a complete newb at scripting, so forgive my ignorance)
the script written is:
Code:
#!/bin/bash
#enable/disable touchpad
sudo modprobe -r psmouse I have saved this script as "mouseoff" in usr/bin (echo $PATH told me this was a directory bash searches, even though it was not a directory and I had to create it with mkdir).
then I did Code: chmod 755 mouseoff However, when I try to run it, I get a "permission denied" error.Can anyone help me with what I am doing wrong?
View 6 Replies
View Related
Apr 3, 2010
Ubuntu 9.10 64bit
Compiz is installed and running on this OS
$ apt-cache policy compiz
Code:
compiz:
Installed: 1:0.8.4-0ubuntu2
Candidate: 1:0.8.4-0ubuntu2[code]....
How to disable compiz temporarily and re-enable it?I can't find System>Preferences>Compizconfig Settings Manager
View 8 Replies
View Related
Apr 30, 2010
I just finished the update. Though everything seems to work just fine hardware wise... somehow it was decided that I'd prefer netbook remix over the standard install. I hate it! I can't seem to find any way to get the standard desktop mode back, and I feel like after the upgrade, my fan has been working overtime for some reason.
Can someone point me in the right direction to disable netbook remix? I really cant stand it.
View 3 Replies
View Related
Oct 13, 2010
I have a strange problem with my networking under Ubuntu. When I first log in to Gnome both my network adapters are listed as "disconnected" in the network manager applet. If I right click on the notification icon and disable networking, then wait a few seconds and re enable it, it works fine.
It's happening consistently with Maverick although it seemed only temperamental with Lucid. I did a fresh Maverick install to see if it would help but it hasn't.
It's the onboard network sockets on a Gigabyte GA-X58A-UD7. I have two ports but I only use one, it doesn't seem to matter which I use. It's connected via gigabit ethernet to a Netgear router. It works fine in Windows 7 (dual boot).
It looks as though something's not quite "ready" when gnome first launches. The light on the router for the cable is off at first, and only comes on after a few seconds. It's DHCP. Same thing happened on the live USB stick (just before the isntaller) and disable/reenable made it work.
View 9 Replies
View Related
Jan 18, 2011
can anyone please provide useful command for :
1)ways to enable/disable OS service(FTP/Email/Web server/Firewall/telnet/Lan file sharing)
2) basic interaction with the OS ( checking information/Open Files/Running Program)
3)Boot-loading configuration and customization
4)installation/uninstallation of programs/system patches
5)System configuration(Time setting/Date setting/User login detail change/Access right control)
View 3 Replies
View Related
Apr 15, 2011
how do I enable or disable the global menu bar?
I used it for a while and got used to it. Then I pressed something (I don't know what) and the global menu bar disappeared and the menu now locally appearing in all windows.
View 6 Replies
View Related
Mar 8, 2011
I have just bought a used Lenovo Thinkpad R61. Most of the things works in Squeeze like it did with Vista. But a bit annoying is that when i Vista with the "Fn-F5" could turn both wireless and bluetooth on and off. Now it is only wireless that works that way. On the top panel i can turn both wireless and bluetooth on and off, but it is still annnnoying. Is the a way to make all keys funktion on my Thinkpad?
View 3 Replies
View Related
