Fedora Hardware :: Complete Specification Listing For RAM
Mar 18, 2010How do I find the complete specification listing for my RAM? I am getting ready to order another card--need to know what to order.
View 3 Replies
ADVERTISEMENT
CentOS 5 :: Complete Software Listing For A RHEL5 Box (NOT An RPM / Package Dump)
Aug 31, 2010I have a need for a complete software list off of an existing RHEL 5 system. I need this list to compare software installed to software on a government approved software list to ensure the compliance of this system. I was given an RPM Dump, listing all the 2000+ packages on the system... This does not translate to the Government Approved software list that I have to compare to. I do not have access to this system myself, so what ever method is prescribed for extracting the list I will have to pass along. What I need is either:
1) A way to convert an RPM Package dump to actual software names and versions, etc.
OR
2) A method to extract a complete list of software (titles/versions/etc) from an instance of RHEL5.
Example: Instead of knowing that "pango-devel-1.14.9-6.el5" exists on the system I need to know that "Pango v3.0.x" is installed on the system. Many packages do not relate on a one to one basis with a specific piece of software via inter-dependencies etc. (not to mention the version of the software, not the version of the package/library). The Pango example is not the best example as you can see what software is likely the source of this package; however just because this package is installed, I cannot grantee 100% that the Pango software suite is installed, just that this package was installed...
Fedora :: Yum Complete Transaction Won't Complete
Oct 15, 2009I am running Fedora 8. Each time I run a YUM command, I get the message that there are unfinished transactions, and to run yum-complete-transaction. Upon running yum-complete-transaction, it fails with this error. How can I remove this uncompleted transaction so I can finish the last one?
View 2 Replies View RelatedFedora Hardware :: Checking Computer Memory - Specification Shows 2 GB Of Memory Instead Of GB
Feb 7, 2011Fedora 14 xfce
HP Mini 210
I am looking to buy some memory for my netbook. Currently I have 1 GB of DDR3 memory. However, the specification says that 2 GB of memory is the max. However, when I do the following it says that 4GB is the max:
[Code].....
Ubuntu :: Firefox Opens File Listing Instead Of Nautilus Opening File Listing
Jun 20, 2010Firefox opens file listing instead of Nautilus opening file listing.When I access a folder via "Places" -> "Home Folder" or "Places" -> "Downloads", Firefox opens and list the contents of the directory.I have re-installed Nautilus, un-installed Firefox and then going to "Places" -> "Home Folder" or "Places" -> "Downloads" launches Nautilus and I can view the contents normally. Anybody else had this problem with Firefox ? Anybody know how to fix this Firefox problem ?Running Ubuntu Desktop 9.10 64bit.
View 2 Replies View RelatedGeneral :: Is System Using USB 2.0 Specification?
Jun 7, 2011Kernel 2.6.21.5, Slackware 12.0...I have a 2.0 USB device at /dev/sda1. How can I know if my system is using the 2.0 specification?
View 2 Replies View RelatedGeneral :: How To Know Specification Of Machine On Redhat 5?
Mar 3, 2010how to know specification of my machine on linux redhat 5?like the size of harddesk and free space on it
Ram , VGA , and so on.
Ubuntu Installation :: Specification Of The Device Is Very High?
May 23, 2010Whenever you try to install Ubuntu 10.04 Desktop Edition does not accept me (knowing that the original CD)
Specification of the device is very high
Ubuntu Installation :: Freezes After The Partitions Specification?
Mar 19, 2011I wanted to install Ubuntu 10.10 on my netbook Samsung N150 but the installation from the pendrive freezes after the partition table specification, both in the case of the manual specification and in the case of the automatic path. I (think correctly..) specified 35 GB of ext4 journ (but I tried also with ext3 journ) and 1GB of swap but when I confirm these specs the installation freeze yet at the "Searching for the file system" (I use a localized lang but I think this is a quite literal translation), when I'm asked for the time zone
View 9 Replies View RelatedFedora :: Ls Flag For Listing Directories?
Oct 31, 2010Is the command "ls -d" meant for only listing directories? Because i tried it and it ALWAYS display just a blue dot. If not what is the correct way to show only directories? I.e. MSDOS equivalent "dir /ad".
View 2 Replies View RelatedFedora :: Gvfs Is Very Slow On Listing?
May 12, 2011As stated , gvfs is extremely slow when browsing smb shares.Mount cifs runs in a third of the time gvfs takes.Often gvfs hangs up while listing.I've searched and see tons of noise about it but no real signal.Does anyone here have any info on gvfs as to why it's so slow browsing?"Name : gvfsArch : x86_64Version : 1.6.2"
View 1 Replies View RelatedFedora :: Listing Subdirectories With Spaces?
May 19, 2011I have want to list sub-directories with spaces but am facing the following problem:
My subdirectories are:
FirstDirectory
Directory with spaces
if I use
Code:
for directory in "`find . -type d`"
[Code]...
Fedora :: USB Stick Listing - Sdb Linked To Sda
Jul 19, 2011I've plugged a usb stick into my server.
cat /proc/partitions
8 0 1981440 sda
8 1 990720 sda1
8 2 436288 sda2
However when I do:
ls /dev/sd*
/dev/sda
/dev/sda1
/dev/sda2
/dev/sdb
/dev/sdb1
/dev/sda2
I'm sure I got no other devices connected that /dev/sdb would point to
cd /sys/block/sda
[root@footy sda]# ll
lrwxrwxrwx 1 root root 0 Jul 18 16:27 device ->
../../devices/pci0000:00/0000:00:03.2/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0
[root@footy sda]# cd /sys/block/sdb
[root@footy sdb]# ll
lrwxrwxrwx 1 root root 0 Jul 18 16:27 device ->
../../devices/pci0000:00/0000:00:03.2/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:1
What does this imply, sdb linked to sda?
Ubuntu :: Short Specification Of Root Director For Copy Command
Jan 18, 2011I would like to copy a file from some random folder and send to a "Test" folder in root directory. But I havn't found how to specify the root directory without using ../ until i reach the root directory.i.e. suppose I'm in my random folder where I want to copy my file sudo cp somefile.txt (root???)/Test
what do i put for root?Just as additional explanation, if I have a Test folder in my home directory that i wanted to transfer to, then i could simply do cp somefile.txt $HOME/Test.
Fedora :: Mv() Command - Tedious Directory Listing?
Oct 22, 2010Within the mv() command is there any way to not need to type the entire directory location? In the example there are directories with varying depths... I want to move a file from depth 2 to a directory of depth 3 when the directory of depth 3 is within the directory of depth 2. Basically, can I cp() andor mv() a file to a subdirectory without having the enter the entire directory location?
Code:
[root@xxx dir]# ls
dirD1
[root@xxx dir]# cd dirD1/dirD2
[root@xxx dirD2]# ls
[code]....
Red Hat / Fedora :: Grub - Recover Without Using A Bootable CD - Fdisk -l Is Not Listing The Partitions
Jan 26, 2010I am preparing for RHCE. While doing the lab I renamed /etc/grub/grub.conf as grub1.conf. Now (obviously) system boots on grub> prompt. Can I recover without using a bootable CD? Another problem that I encountered was, while doing lab for fdisk, I used command umount -al. Now, fdisk -l is not listing the partitions but giving a message:- /proc/partitions does not exist. If I reboot the system this is restored.
View 1 Replies View RelatedFedora :: Script / Program That Will Give A Listing Of All The Content On My Hard Drive(s)?
Aug 3, 2010Does anyone know of a script / program that will give me a listing of all the content on my hard drive(s)? I have two drives that I keep my content on (which is re-downloadable if I lose a drive). In the event that I lose a drive, I would like to have a list that I can refer to so I know what I need to re-download again.
It would be good if it doesn't list *every* file but maybe only the relevant folders and files. For example, many folders are extracted archives of 100's of files. If it just gave me the folder name that would be better than all the files (less stuff to sift through).
Fedora :: Best And Complete GUI For Git Available?
Nov 24, 2010Is there a GUI for git? If yes, What one is the best and the most complete?
View 3 Replies View RelatedFedora :: Yum-complete-transaction Broken ?
Mar 20, 2009[axet@axet-laptop ~]$ sudo yum-complete-transaction
Loaded plugins: refresh-packagekit
There are 1 outstanding transactions to complete. Finishing the most recent one
The remaining transaction had 130 elements left to run
Not removing old transaction files
Fedora :: How To Set Auto Complete Feature For SCP
Aug 18, 2010How do I have an auto completion feature for scp? I often need to 'scp ' a file to a remote server, then I type:
PHP Code:
scp someprogram paulga@pinherstforestrain.math.edu
I'd begin to type tab before or after the input of @. But the available choices are mainly:
@localhost6, @localhost.localdomain, @localhost, etc..
Which file records these hosts name? Second, to execute a program in current directory, I have to type ./program, how can I omit the prefix, or I could type it as I type "octave",etc.
Fedora :: Run Yum Complete Transaction As Root
Jan 11, 2011Running Admin>Software Updates generated this error: There are unfinished transactions remaining. Please run yum-complete-transaction as root. That's what I tried to do.
[sleven@unit1 ~]$ yum complete-transaction
Loaded plugins: langpacks, presto, refresh-packagekit
Adding en_US to language list
No such command: complete-transaction. Please use /usr/bin/yum --help
[sleven@unit1 ~]$ sudo yum complete-transaction
[sudo] password for sleven:
Loaded plugins: langpacks, presto, refresh-packagekit
Adding en_US to language list
No such command: complete-transaction. Please use /usr/bin/yum --help
[sleven@unit1 ~]$ su -c "yum complete-transaction"
Password:
Loaded plugins: langpacks, presto, refresh-packagekit
Adding en_US to language list
No such command: complete-transaction. Please use /usr/bin/yum
used /usr/bin/yum --help to look at the yum commands file, and can not find that command.
Fedora Installation :: Complete Install 14 On USB?
Jun 1, 2011I want to install fedora 14 completely to a USB drive, not the live USB but a complete installation. I am using linux after a long gap of 9 years and have forgotten most of the things.
View 1 Replies View RelatedFedora :: How To Install Complete Package
Sep 6, 2010I'm trying to get my bearings in Fedora 13 (64-bit) in a virtual machine.I'm using the version with the Gnome DE.Now I'd like to install Koffice. But when I got to the package manager to select packages to install, I get a huge list of components to select for installation -- Kwrite, Kspread, Core support for Koffice, Libraries needed for Koffice, etc.Is there any way to select the version of Koffice that I want and have the whole set of necessary packages automatically be selected too?
View 3 Replies View RelatedRed Hat / Fedora :: Complete Automated Installation Using Kickstart
Jan 25, 2010I want to install Red hat based custom OS in a complete automated mode.I ll have my kick start file inside the CD rom and when I boot with that ISO or CD.The OS should start installing by taking parameters from the kick start file without having to specify the path of the kick start file inside the CD.like "linux ks=<path>".Is it possible to achieve this by writing any script or something so that when the CD boots the kick start path is passed automatically to the anaconda installer.
View 5 Replies View RelatedFedora X86/64bit :: Cannot Complete Boot After Most Recent Update
Apr 26, 2009Just did the most recent set of updates late yesterday (kernel and Nvidia). Since the update I cannot get to a login screen - just blinking cursor. In fact the cursor blinks for a bit then disapears only to reappear as if there are repeated attempts to complete a process unsuccessfully.
The update replaced the xorg.conf. I tied a couple of revisions, inlcuding replacing it with the earlier working xorg.conf. No luck.
Hardware is MSI K9N6GM board with Nvidia Geforce 6100 nforce 430.
Fedora X86/64bit :: Cannot Complete Install On Centrino 2 Machine
Apr 29, 2009My attempt to install Fedora 10 x86_64 to a HP EliteBook6930p with an Intel Centrino 2 processor failed. Initially the CD load presents the start screen where I select Install. Then the machine displays multiple errors. When the error scrolling stops the last comments displayed are:
ACPI Error (psparse-0530): Method parse/execution failed [\_TZ_.PSWT] (Node ffff88007fb48720), AE_AML_PACKAGE_LIMIT
ACPI Error (psparse-0530): Method parse/execution failed [\_TZ_.GTTP] (Node ffff88007fb486e0), AE_AML_PACKAGE_LIMIT
[Code].....
Fedora :: Bash Arrows While Waiting For A Command To Complete
Jul 31, 2010For as long as i can remember, using arrows (and home/end) in a bash shell that has a command running would print some fancy ^[[A caracters and then return the prompt at the end of this.
Now this behavior has changed. Using the arrows while a command is running actually moves the cursor on the screen. When the command completes the prompt appears at the new cursor position which is kind of strange and messes the screen.
For testing, just enter "sleep 10" and during the wait move the cursor with the arrows and home/end.
How can i get back the original behavior?
> rpm -q bash
bash-4.1.7-1.fc13.x86_64
Fedora Servers :: Can Not View Complete Detail Of /var/log/messages
Apr 18, 2011I want to check my system general log file by the following command.
PHP Code:
It just show me only these two lines Normally every day at morning I check all system general log files and some times it is too much long that I press space bar to go my prompt.
Servers :: Need Complete SQUID Setup Guide For Fedora
Jul 14, 2011I need the complete reference guide to set up my own SQUID transparent proxy Server with Gateway support. I am using Fedora 14. Please help me with LINKS/REFERENCE. I am a learner in Squid.
View 1 Replies View RelatedFedora :: "find" Lockup \ Opening Another Xterm Window And Killing The Listing Command?
Oct 12, 2009I have a problem that I'm not sure how best to debug. About every other time when I boot my system, I get a condition where listing the files in /root locks up that xterm session.This can be cleared by opening another xterm window and killing the listing command. This happens on "ls -a", "find", "tar" and I think "stat" also. The locked up xterm echo's chararcters but does not respond to any control sequences. This is new with FC11.This has only been seen to happen for root. And once a system is booted with this problem it seems to persist until you get it booted without the problem.
View 8 Replies View Related