Fedora Networking :: How To Start Wlan0 On Bootup
Dec 4, 2010
I've been able to get a laptop on Fedora 14 (2.6.35.6-48) working with a Netgear WNA1100 Once up and running, I execute "ifconfig wlan0 up" from root, and everything connects just fine and is stable as long as I stay logged in. But, I haven't found how to do this automatically on boot.
I've tried to use NetworkManager, but I cannot figure out how to get the GUI to show up - it says its running and enabled in the Services gui, but I haven't figured out how to actually use it! I checked to see if the nm-applet is running with ps, and for the user login, I see:
I'm not sure if the "sm-disable" flag is my problem, or how to change it. I'm not even sure if NetworkManager will allow me to set things up for bootup, but that is the path I ran down...
I assume this is a fundamentally easy process to set this up on bootup, but I'm not stumbling across the method. I recall doing this kind of thing years ago when I was an engineer, and before I got my lobotomy to become a manager...
View 1 Replies
ADVERTISEMENT
Dec 29, 2009
We need to have the wireless associated with the access point prior to the first login.
Have not been able to get it to work yet. WPA-PSK. wireless will not connect until login.
This is necessary for nfs automount and openldap auth to work. Not a home networking environment.
How to troubleshoot effectively.
View 3 Replies
View Related
May 20, 2009
When I try to bring up my wi-fi PCI card (ifup wlan0 or ifconfig wlan0 up) my whole PC just hangs until I power it off.
I believe I have the right drivers, but cannot see what I am doing wrong.
I'd really prefer not to go down the ndiswrapper route.
Firstly, I can see the PCI card and the driver it is using :
Code:
[J@gx260-f10 ~]$ lspci -k
...
...
01:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller (rev 20)
[Code]....
the PC just hangs for ever. No mouse movement, ctrl-alt-del, nothing.
I have downloaded a Linux driver from Realtek but it will not compile. I have the latest kernel-devel, headers, and gcc. I can post compiler errors if anybody would like. They're all apparently to do with missing parameters.
View 6 Replies
View Related
Jan 20, 2011
I have a new HP G62-352CA with the Realtek 8191SE wireless. I am running Ubuntu 10.10 everything works fine except every time I restart the computer I have to press fn f12 to restart the wireless. Is there a way to have it default on at startup?
View 3 Replies
View Related
Jun 6, 2010
Also having this problem on Ubuntu 10.04.If I do "iwlist scan" I can pick up networks on wlan0:
Code:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
[code]....
View 2 Replies
View Related
Dec 18, 2010
Problem I have is the Samba server, it does not seem to start up the shares at boot.When I boot the system, nothing is available on the network, I have to run the Samba Server Configuration Tool everytime I want to access a share, edit a share, save and quit, then my network shares become available.I see Starting SMB services during boot up, it says OK.It worked good on Fedora13.
View 2 Replies
View Related
Apr 18, 2009
I am tring to get my linksys wireless router to connect to my laptop that i recently installed Fedora 10 on. Well it is actully running of an external HD. Any way when i boot in windows it connects and works fine, but when i try to activate wlan0 it says "Cannot activate network divice wlan0!" "determining IP info failed..."
View 11 Replies
View Related
Nov 1, 2009
The past couple days I've been attempting to use ndiswrapper to connect to my home network wirelessly and have run into a slight problem. I'm able to install ndiswrapper (of course), and install the driver. ndiswrapper -l comes up good, showing the driver is in place for my netgear wg311v3 card.
modprobe ndiswrapper I am able to get to work without errors, except, when i type ndiswrapper -ma it writes another file to /etc/modeprobe.d/ndiswrapper causing the deprecation error.
The card scans for networks, and I'm able type in my encryption key.
However it doesn't connect. | grep comes up with the error that the wlan0 link is not ready.
I think I've also been able to determine that the configuration I've put in to the card through the network manager is not actually configured.
Anyone know how I could possibly connect with the card.. It seems it should be able to work. alias wlano is also in place.
View 7 Replies
View Related
Jun 23, 2011
Can't get wlan0 working:
In networkmanager the device apears unavailable.
View 6 Replies
View Related
Jul 22, 2009
Having trouble with wireless and FC11, eth0 is ok. When I try to activate wlan0 through system-config-network 1.5.97, I get msg: Error for wireless request "Set Mode" (8B06) : SET failed on device wlan0 ; Invalid argument. Determining IP information for wlan0... failed. This is a compaq laptop.
<uname -r>
2.6.29.6-213.fc11.i686.PAE #1 SMP Tue Jul 7 20:59:29 EDT 2009 i686 athlon i386 GNU/Linux
<lspci>
The wireless card is Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter
(rev 01)
View 7 Replies
View Related
Nov 4, 2009
I would like to mount a bunch of folders/shares when I start my machine up. I will be adding the mounts into my /etc/fstab folder BUT my WLAN0 only comes "up" and connects to my WAP AFTER logging in.
how I get it to start on PC boot instead of log in?
I think I need to disable network manager but I'm unfamiliar with the procedure in Fedora
View 2 Replies
View Related
Feb 18, 2010
i can't get a pppoe conection working over a wireless network,in windows I have to connect to the router first, and then put in my user and password to get connected, but i don't know how to do this on fedora, i get connected to the router through network manager, and ping is ok, but when i try to make a new xDSL connection i don't know how to make it work through the wireless network that is established and working with my router.
View 9 Replies
View Related
Apr 30, 2010
Code:
Commands as root works well when normal user is logged in and connected to net via KDE 4 network manager, but after logoff network is gone. And it is impossible to get it back because command mentioned above stops working!
View 4 Replies
View Related
Aug 22, 2010
I am having a problem trying to transfer large file (~700MB) from one station in my home to another. I have 3 PCs hooked up through a router. 1 is wired to the router and the other two are wireless. One wireless is a laptop that has a built-in Atheros wireless card that was supported during the FC13 install. The other wireless has a plug-in wireless card made by Belkin (F7D1101). I had to use ndiswrapper to get it to work on FC13.(BTW all PCs are running FC13)
The one with the Belkin card is, I think, the problem. The one with the Atheros card will transfer files at a rate of about 8MB/sec to the one with the wired ethernet connection. The one with the Belkin card will not transfer at rates over 300KB/sec to either of the other two PCs. I have tried file transfers both encrypted and not and it makes no difference.
View 2 Replies
View Related
Feb 28, 2009
I do not know how it came to pass, but it has come to pass. I was in the process of updating my desktop Fedora 10 (KDE) system with yum, when I finished that I got a message about
Quote:
I have no clue what this means.
View 8 Replies
View Related
Mar 16, 2009
Since 2.6.27.19-170.2.35.fc10.x86_64, dhclient wlan0 doesn't seem to work any more.
However, bizarrely, dhclient eth0 does (to the same D-link wireless router).
The AP shows connected - tail /var/log/messages
No working leases in persistent database - sleeping.
WINXP connects just fine. This (B43) has worked nicely ever since FC10 came out, and I was able to use the WiFi at all kinds of places on a recent trip. Other than a couple of yum updates, I don't think anything else has changed since. Other devices on the wlan are getting their DHCP requests satisfied correctly.
Is anyone else having this problem since about a week ago? Perhaps there's something really obvious I'm missing. I can manually assign an IP address to wlan0, manually edit the routing tables and edit /etc/resolv.conf, and then Wifi seems to work OK, so it doesn't seem to be b43 itself unless it is dropping DHCPOFFERS. If this isn't a regression, does anyone have any tips about how to debug this?
View 3 Replies
View Related
Aug 22, 2010
I just installed Fedora 13 from the Live CD. FIrst off I read the guide and the first step doesn't even work for me. System>Administration>Network does not exist. If I go to System then Preferences I see a Network Manager but it looks nothing like what these screen shots look like. [url]
No wireless card show up in the wireless tab of Network Manager. How can I fix this since my card is listed in ifconfig and iwconfig. Wifi card is a Zonet zew2500p
View 2 Replies
View Related
Feb 3, 2011
what i want to do is
client <--> wlan0 <--> computer <--> eth0 <--> internet
i have 2 network connections eth0 wired connected to internet wlan0 wireless (work fine) i have installed hostapd with madwifi and so on oki when i run hostapd the clients see the hot spot oki clients connect with wpa oki network manager run at demand not automatic (keep it for internet help) now i'm a bit lost what do i need is wlan0 give the client an ip (dhcp demand) create a bridge between wlan0 and eth0 steps to create a permanent bridge between wlan0 and eth0
View 2 Replies
View Related
Feb 22, 2011
I have setup hostapd and a bridged setup with br0 bridging eth0 and wlan0. The setup works but unfortunately not on bootup. The reason is that the bridge can't add iface wlan0 because it is down for some reason at this time. When hostapd is running (after the network script) the interface is up and can be added to bridge via
[Code]....
View 2 Replies
View Related
Jun 25, 2010
In an attempt to set up wireless so I could connect to the university network, which I think I probably should have just downloaded network manager or something but I didn't, I tried to put things in /etc/conf.d/net and some other places and I am afraid I'm not sure exactly what (and I have learned my lesson! I will pay attention to what I am doing so I can undo it next time I mess around with stuff!)
Anyway, the long and the short of it is now, when the computer is starting up and its doing the init stuff net.lo doesn't start. Later try and start net.lo or net.eth0 you get told "not enough arguments"
View 3 Replies
View Related
Jul 3, 2010
Quick question guys and gals: How do I get "wlan0" and "eth0" interfaces to start at startup as as well as for "dhclient" to obtain an IP address automatically for "eth0?"
View 7 Replies
View Related
Jul 3, 2010
I am still encountering problems getting the Broadcom 4321 chipset to work on my Fedora 13, even after using this guide, this guide and another guide on ndiswrapper.
To answer the standard questions:
Code:
Code:
Code:
Code:
and finally
Code:
But no wlan device or anything else.
View 2 Replies
View Related
Nov 13, 2010
Just installed f14 on my Toshiba laptop, which has a realtek ethernet card. i installed the drivers from the realtek site with no issues (also, i know the card is good, i had it working on suse a while back). No matter what I try, i cannot seem to get the computer to recognize there being a wireless connection (tells me no such thing as wlan0).ifconfig shows the following:
Code:
# ifconfig
eth0 Link encap:Ethernet HWaddr 88:AE:1D:F4:AD:88
[code]...
View 6 Replies
View Related
Jul 13, 2010
In the past (before UpStart was used in Ubuntu) I was able to configure multiple boot items in Grub menu to load the same kernel but into different runlevels. I had configured runlevel 3 (I went into /etc/rc3.d/ and removed the symlink to /etc/init.d/gdm) to be w/o GDM, so that if I had chosen it, my box would not boot into X. How can I achieve the same effect in Lucid?
View 2 Replies
View Related
Apr 30, 2011
I installed SLIM and rebooted. gdm failed to start so I went to the terminal and ran gdm manually from there. Then i logged in and removed slim package, reinstalled gdm and rebooted. Gdm still fails to start at boot up. When i try to manually start it, i get the following warnings:
Warning: unable to load file 'etc/gdm/custom.conf'
Warning: unable to find users: no seat-id found
View 3 Replies
View Related
Jul 24, 2011
I have a 32-bit openSUSE 11.4 (2.6.37.6-0.5-default) installation with a
WNBA3100v2 wireless USB card and a 100Base-TX NIC running on a Dell 4700c:
Code:
BCM4401-B0 100Base-TX (Not connected)
MAC : YY:YY:YY:YY:YY:YY
BusID : 0000:04:07.0
Device Name: eth0
[Code].....
View 9 Replies
View Related
Nov 29, 2010
I'm running Slackware-13.1 on my laptop. Connection to my network is via wlan0, a cable in most cases not pluged in.When starting the system the first attempt to configure the network is via eth0, which ends with dhcpcd timing out since there is no cable pluged in. Afterwards wlan0 is set up properly.
I have installed ifplugd, which is a daemon who connects to ethernet only if a cable is connected. With Gentoo this works out of the box. With Slackware ifplugd is started after rc.inet1 (probably). So the the system still tries to connect via ethernet before connecting to the wireless network.
I have also installed wicd.How can I manage that wlan0 is prefered over eth0?I noticed that neither wicd nor ifplugd belong to the default full installation of Slackware and therefore assume, there must be a solution which meets my requirements without even one of both programs.The laptop is only used at home. Wireless connection is normaly used. I need eth0 only in a case of emergency.
View 2 Replies
View Related
Nov 25, 2009
I installed polipo and polipo working perfectly, but it won't startup when I bootup the system. To start polipo correctly, root privilige is needed. I remember that in Ubuntu polipo starts with the system after installation. What should I do to make polipo start during the bootup process?
View 9 Replies
View Related
May 8, 2011
How do I add a route that doesn't go away after a reboot? I tried adding to /etc/sysconfig/network-scripts/route-wlan0 and /etc/sysconfig/static-routes but neither of them did anything when I restarted network and NetworkManager. route command does not show the new route that I added. I tried this too - routes.html and there were no errors but the new route doesn't show up with the route command.I added "192.168.13.88/255.255.255.255 via 192.168.13.101 dev wlan0"
View 2 Replies
View Related
May 22, 2011
I am using an Acer Aspire 5536 AMD dual core laptop with a 64bit installation of Susie 11.4. Using 11.2 I had no problems connecting to the wireless router. As soon as 11.4 was installed, clean install, and the laptop rebooted, network manager failed to start, until manually invoked and then enabling networking through the system tray. Even after this it will not connect to a wired or wireless network sometimes for more than 30 minutes.
View 9 Replies
View Related
