I upgraded to testing to 2-6-39-2-amd64 successfully (from 2-6-38...), but when I start to upgrade software packages, there is an error E: postgresql-common: subprocess installed post-installation script returned error exit status 1 I tried to pkill -9 postgresql-common and restart the package upgrade, but got the same error message. Here is the dpkg.log
[Code]...
I have installed php 5.3.6-4 on centOS 5.6. When i try to install some modules of php then it gives an error
php53-common-5.3.3-1.el5_6.1.i386 from updates has depsolving problems
--> php53-common conflicts with php-common
Error: php53-common conflicts with php-common
[code]....
I have reinstall it twice but each time i get same error.
I'm not very sure when this issue started. Anyway, the system finally boots and I haven't had any further problems, but I somehow notice the booting to be a bit slower since this error appeared and I don't like watching the red letters that say "failed" every time I switch the computer on. I googled this before posting it, and other users have had this issue, but the solutions that worked for them didn't work for me.
This is the content of my /etc/network/interfaces file:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
When I recently upgraded my desktop to Karmic, my postgresql 8.3 no longer starts. I've got data in 8.3 that I need, but now no way to access it. Karmic upgrades to Postgresql 8.4, but leaves 8.3. Problem is, I can't seem to start 8.3 no matter what I do (there's no error message. I even tried removing 8.4 entirely--without effect. When I try to start 8.3 (using command line or boot-up manager), there is no error message, either in system logs or in the postgresql log file. There is also no indication of an active postmaster in ps aux or anything listening to postgresql ports in nmap (for that matter, seems there's nothing listening even with 8.4 activated).
I could try to 'upgrade' my data cluster to 8.4. Never tried that before and am concerned about possibly losing data. Also, I made a load of tuning adjustments to 8.3 that I'd have to replicate with 8.4. I'd rather stay with 8.3, if possible. There are also two pieces of software, postgresql-common and postgresql-client-common, that presumably allow one to run two versions of postgresql simultaneously. Maybe this stuff is even the source of my start up problems. No idea where to learn how to use this software, and, esp., whether this would solve the 8.3 start problem.
I've just upgraded from ubuntu 8.04 LTS to 10.04 LTS.
During the installation I received the error message that tex-common could not be installed. After searching the forum and bugs, I found these
https://bugs.launchpad.net/ubuntu/+s...on/+bug/580881
https://bugs.launchpad.net/ubuntu/+s...se/+bug/228334
talking about dependencies issues, with the solution to first install texlive-base. I have now tried to remove all tex packages completely and reinstall them, starting with texlive-base, but I keep getting the same error. code...
I just upgraded a Ubuntu Desktop 64bit system from Karmic (9.10) to Lucid (10.04). There were several PostgreSQL 8.3 clusters running on that machine. After the upgrade, postgresql was not able to run anymore.
The package postgresql-8.3 was marked "rc" in dpkg -l I was not able to re-install PostgreSQL 8.3 because of a mismatched dependency. There was no warning. I guess i should have read the release notes, which i didn't. There should have been a warning before it was too late to turn back and upgrade postgresql to 8.4 first. I don't see how this is supposed to work, ever.
I'd like to know if this would be considered a bug, if it is known already and how to correctly file this bug correctly if appropriate (ubuntu-bug ?)
A couple of days ago, I upgraded my Kubuntu to Lucid. In this phase, the system reported that it was impossible to upgrade samba-common, and the installation aborted on 90%. Nevertheless everything is working but KPakageKit, which reports:
"There are broken dependecies on your system. Please use an advanced package manage e.g. Synaptic or aptitude to resolve this situation."
Neither "sudo aptitude safe-upgrade" nor "sudo apt-get -f install" solved the problem:
omen@darkstar:~$ sudo aptitude safe-upgrade
[..]:
samba-common
kubuntu-desktop .....
So the problem is really samba-common.
we have postgresql database in our server. when i tried to install our application it throws some error like "org.postgresql.util.PSQLException: ERROR: encoding UTF8 does not match locale en_US Detail: The chosen LC_CTYPE setting requires encoding LATIN1". the locale which is set in our server is
[code]...
I don't know how to approach to solve this error.
I have installed PostgreSQL 9.0 in Ubuntu 11.04.The following is a bit long-winded and cross-relates to PostgreSQL,I ran the PostgreSQL installation thus:
Code:
sudo su
./postgresql-9.0.4-1-linux.bin[code]....
The problem, obviously, is the "Permission denied" error. What/where am I going wrong? From my directory listing I can see that the permissions for gjd_sentinel_data are drwxrwxrwx with owner/group of postgres. On that basis I can't see why there is the problem.I am wondering if it has something to do with the psql process running as, or owned by, user postgres? Or that I am running as the wrong user? Or something else beyond my experience?
---
Ubuntu 11.04 with GNOME2 classic desktop
Single user.
Dual boot with Windows XP Home
I've download the gpac files for MP4box from:[URL]..but im having issues compiling it. Its telling me "gcc: error: unrecognized option '--warn-common'"Running 64bit FC 15
View 2 Replies View RelatedI have weird problem with postgresql + nginx + php5 0 ubuntu 11.04. Postgresql works just fine, when I run "php test.php" from shell. I assume php runs from shell are called cgi runs? When I open page from browser [URL]... I get following error. I assume php runs from browser are called cgi runs? Fatal error: Call to undefined function pg_connect() in /var/www/mydomain/htdocs/test.php on line 7 When you print php info, only reference to postgresql is pgsql.ini and pdo_pgsql.ini files that are parsed.
[code]....
I did install postgresql by running following commands:
sudo -s
aptitude install postgresql
aptitude install php5-pgsql
I can print through my samsung printer on ubuntu and everything through the network, but whenever I try to print through the network using Adobe Reader I get a Package cupsys-common error,?
View 1 Replies View RelatedI want to install php-soap on centos 5.2 server. When i run the command, yum install php-soap, i get the error:
php-soap-5.1.6-24.el5_4.5.i386 from updates has depsolving problems --> Missing Dependency: php-common = 5.1.6-24.el5_4.5 is needed by package php-soap-5.1.6-24.el5_4.5.i386 (updates) Error: Missing Dependency: php-common = 5.1.6-24.el5_4.5 is needed by package php-soap-5.1.6-24.el5_4.5.i386 (updates) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest The php common file is not actually missing, its there with the exact name. The problem seems to be that the php-common file is installed from some other repository, thats y it is creating dependency problem. The only solution i found is to remove the current php-common file and install it again, but then lot of programs get uninstalled with it, which is y am afraid of doing that, since its a vps, and some 10 sites are working on that.
I have tried many variations of the following, but always get the same error.
Quote:
# aptitude install postgresql-8.3
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code]...
I am trying to install gcc in RHEL 5.4
These is the output:
I can not install the glbic-common file cause it give me a conflicting error (the package is already install but it is somehow not recognize by the system)
Debian Lenny Gnome
Intel Celeron, 1100MHz, 512k
Earlier today I downloaded a video of a Mozilla Project preview, in MP4. Of course, it won't play. All I get is the audio, and this error:
Quote:
"An error occurred. The playback of this movie requires a H.264 decoder plugin which is not installed."
I put in some time, researching this issue, trying to figure it all out. I guess I'm looking in the wrong places. Is this a proprietary format issue? Also, when I was overdosing on XP, my media drug of choice was Klite mega codec pack (from codecs.com). It literally plays every media format, audio and video. In addition to fixing the above issue, can somebody guide me to an equivalent player with codecs for [insert any media type here]? I have several Terrabytes of various video and audio files, and prefer to not convert them all.
I've been trying to configure Postgresql in Debian for some time now, in order to install a ERP program in my computer, but when trying to follow the tutorial for the program configuration I end up stalled. Basically its says this:
1) under su, start by finding the postgresql.conf file (it points the location of the file in /var/lib/postgres/data, but it isn't there) and find the line saying 'tcpip_socket' and changing it to "true"
After a little search and help, I found this file in /etc/postgresql/<version>/main/ but the mentioned line is absent, locate it or tell me where to add it in the file? I've read the file front to back and I'm pretty sure the line isn't there.This is, according to the tutorial, to enable the server to connect to a Java program through the JDBC.
2) after editing postgresql.conf, edit pg_hba.conf and add the following line to the end of the file: host all all 127.0.0.1 255.255.255.255 trust
I get stuck after this, because I'm now supposed to restart the server by using '/etc/init.d/postgresql restart', but bash replies that the path is invalid. The program I'm trying to install is hosted here: [URL]. It's a portuguese ERP program.
I'm going on to install my old application running on specific old configuration (debian 4 etch) into my virtual machine...
This time, i'm hurting a new problem while installing postgresql in the release 8.2 (not 8.3, nor 8.4, neither 9.x cause my application will run only on 8.2).
Logging in root, i enter this (like in 2008) :
But today (year 2011 with old etch), when i enter this i got the error message than it cant find this paquets ! off course i did my apt update before.
So, what can i do ? i really need to install the exactly 8.2 release (even 8.2.21 will be good)
I have Debian 6.0.2 / 64 bits installed on a VPS.I cannot install any package because of this error:
Setting up nfs-common (1:1.2.2-4) ...
insserv: Service portmap has to be enabled to start service nfs-common
insserv: exiting now!
[code]....
I just installed ubuntu 10.10 x64 It worked okay for awhile, but now everytime I startup I get this error message:
GConf error: Failed to contact configuration server; the most common cause is a missing or misconfigured D-Bus session bus daemon. See http... (Details-1:Server ping error:IDLmg.org/CORBA/CoMM_FAILURE:1.0)
So my desktop is basically worthless (Can't vnc in, windows have no title bar, can't launch anything)
I am trying to follow this site [URL]... but I cannot install the bstheme-common package. I download the .deb and then try sudo dpkg -i bstheme-common-_0.1-1_all and I get this: Preparing to replace bstheme-common 0.1-1 (using bstheme-common_0.1-1_all.deb) Unpacking replacement bstheme-common
[code]...
I imported one table from a csv file format with no problems. The file fields where matching my table fields. For a second table import (I will use a similar example to simplify: So I created a table with the following fields: Contactname addr city zipcode the file to import has the following fields Contactname firstname middlename lastname addr city zipcode.
[Code]...
I am a frequent user of debian I think I'll be a lot here start immediately with a problem, and I hope that someone has already happened and found a solution. In practice I have to install a IBM x3250 m3 and the cd installer debian lenny 5.0.3 or 5.0.4 do not want it to find the CD-ROM drive, a module to mount the drive after the bootstrap the exact error on the screen comes up after selecting the language and keyboard: no common cd-rom drive was detected cd-rom modules
View 1 Replies View RelatedWhenever I try to install or remove a program, I get the following error
Code:
dpkg: warning: files list file for package `libavahi-common-data' missing, assuming package has no files currently installed.
dpkg: warning: files list file for package `libgtk2.0-common' missing, assuming package has no files currently installed.
dpkg: warning: files list file for package `libxres1' missing, assuming package has no files currently installed. (Reading database ... 55%dpkg: unrecoverable fatal error, aborting: files list file for package 'ubuntu-mono' is missing final newline E: Sub-process /usr/bin/dpkg returned an error code (2)
Last weekend, i upgraded debian from 6.0.1 to 6.0.2, i notice that apt was upgraded, but the gpg keys remained unchanged.However, after i upgrade, when i do "aptitude update" i get errors such as
[... usual hit and other stuff ...]
W: GPG error: http://mirror.nus.edu.sg squeeze Release: The following signatures were invalid: BADSIG AED4B06F473041FA Debian Archive Automatic Signing Key (6.0/squeeze) <ftpmaster@debian.org>
[code]....
xserver-common (2:1.10.4-1) was upgrade today in Sid to xserver-common (2:1.11.0-1) breaking my nvidia driver (NVIDIA-Linux-x86_64-280.13.run). There is a temporary fix as showen below.
Section "ServerFlags"
Option "IgnoreABI" "true"
EndSection
Some problems do exist and downgrading may be a better option.
I need to look at bugreports at nividia but not sure how. LOL guess it's time to google.
Code:
E: empathy-common: subprocess installed post-installation script returned error exit status 2
E: empathy: dependency problems - leaving unconfigured
E: nautilus-sendto-empathy: dependency problems - leaving unconfigured
I installed apache2 and mysql database on a Debian system. It is using reverse proxy on apache to redirect requests to apache2 running on any machine which is on Xen server as a Virtual host. I tried to install Drupal on it. Every thing went fine till I pointed my browser to:
http://IP[/url] of LAN where Drupal was installed/drupal
then I see an installation page of Drupal which welcomes me. I click install in English then it can not proceed to connect with database. Database configuration: Your web server does not appear to support any common database types. Check with your hosting provider to see if they offer any databases that Drupal supports.
I have created a database and username for Drupal separately. What should I check to. There is one more error
http://Public IP/some location/
Is showing me contents of Document Root but there is a folder named drupal on it. When I click on it I get error. Not Found. The requested URL /drupal/ was not found on this server. Apache/2.2.9 (Debian) PHP/5.2.6-1+lenny8 with Suhosin-Patch proxy_html/3.0.0 Server at
What things should I check in for? I am also getting errors like:
- Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName on individual DomU's what should I check in. and on Dom0 when restarting apache2 I get following error.
- Reloading web server config: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName
[Wed Apr 14 15:23:05 2010] [warn] NameVirtualHost *:80 has no VirtualHosts
/var/log/syslog is full of messages
/etc/gdm3/Xsession[3408]: ![1433316153,000,xklavier_evt_xkb.c:xkl_xkb_process_x_event/] #011ATTENTION! Currently cached group 0 is not equal to the current group from the event: 1
What this means and how to fix it?
After one year of squeeze use without problem (and without upgrade) on a laptop and I decided to upgrade everything today. During the upgrade, I was asked what partition grub should handle. There was 2 choices /dev/sda and /dev/sda1. I checked only the last one and this is I think the source of my problem.
Now restarting the system, grub fails and reports
Entering rescue mode... error: the symbol `grub_xputs` not found and leave a useless prompt grub rescue>
I don't have a rescue cd at hand right now. I have a usb key with some old version of eeebuntu (my laptop is not a eeepc) and surprisingly I can boot on it.