Fedora :: Winetricks Not Working For 1.1.36 / Solve It?
Feb 5, 2010
I've been trying to get Full Tilt Poker running for a while now, with the 32bit wine available for x86_64, but it complains about phonon4.dll not being able to initialize. I've tried using winetricks to get it working, since it's as good a starting point as any, but even if I do the program bails out on me constantly with:
Quote:
winepath -u %ProgramFiles% returned empty stringles
I want to play HOI3 using wine and the WINEHQ site says I need to install some plugins using Winetricks. It had a tutorial for Ubuntu but not for fedora. how do I make this work?
I try and install Steam, I (according to this guide) need Winetricks. So I installed Wine and then Winetricks, but when I try and do:
Code: sh winetricks corefonts allfonts tahoma gecko gecko-dbg vcrun2005 I get the error:
You're using a 64-bit WINEPREFIX, most of winetricks hasn't been fixed for win64 yet. You can force a 32-bit WINEPREFIX by using WINEARCH=win32.
Now, I googled this, and almost all results seem to return to the same conversation. I did not understand the answer given. Can someone please dumb it down for a new Linux user on what I need to do?
I'm trying to run (INVedit, for the Minecraft Alpha) needs fm20 installed to work. So going through the winetricks motions, I have it run, but the install program says "Microsoft ActiveX Control Pad Setup was not completed successfully."
However, this is the output from "sh winetricks fm20" code...
Have strange problem when I get asked for my password in the terminal.Using Ubuntu Lucid 10.04. I was typing : sudo ufw status. When the keyboard asked me for my password then when I went to type in my password nothing typed.When I press the keyboard nothing happens. Just started today.
I'm new to ubuntu and using 9.10. I have installed a dlink wua 2340 wireless adaptor and it is working properly. But after waking up computer by standby mode, wireless connection breaks and the wireless device is not mounted. Therefore I always have to shut down the computer and restart again to establish wireless connection.
I'm trying to get a fresh install of Ubuntu 10.10 working with the closed Nvidia driver, as I would like to get the HDMI output working.
I have a Sony Vaio VPCCW18FX, with a Nvidia GT 230M graphics card. The open source nouveau driver works fine, but does not run smoothly. The only problem here is that it's needed to run with "nomodeset".
If i just activate the Proprietary Nvidia driver and reboot, it will hang after writing "Checking battery State [ok]". I have tried to add EDID from Windows partition, and here it hangs at a blank black/grey screen. I have tried hooking up an external display, no output on it either.
I just installed ubuntu and want to install a theme http://www.ubuntuthemes.org/overglossed.html i downloaded it and tried to install it but when I did it said that GDT + theme is not installed. I looked it up and found that I had to install them from synaptic package manager, I did it but still not working. How can I solve it?
I'm new to linux. I've just installed Ubuntu 11.04. It has all been going ok, but the wireless just stopped working all of a sudden. The indicator light turned off and when I tried to turn it back on (Fn+F2) nothing happens. Sometimes, when I restart the computer, the wireless might work; but if the signal is lost the LED on my laptop turns off and I cannot reconnect. Also, in these strange cases that the wireless works when I restart I can manually turn it off (Fn+F2), but nothing happens when I try to switch it back on.
In the menu on the upper right corner I see 'Enable Networking' is checked, but 'Enable Wireless' cannot be modified.
I have a Dell Inspiron 6400 and the wireless device is an Intel Pro/Wireless 3945ABG. I have tried to follow some of the threads on this forum on similar cases, but the ones that were comprehensible to me did not work (or I actually might not have understood them either). code...
I am using CentOS 5.4. I updated my firefox to 3.6.7. After that when I login in facebook and click anything in facebook, my pc log out, even from root user. cause & solution of this problem.
rpm -ivh kernel-2.6.29.6-217.2.16.fc11.i686.PAE.src.rpm error: open of kernel-2.6.29.6-217.2.16.fc11.i686.PAE.src.rpm failed: No such file or directory
rpm -ivh kernel-2.6.29.6-217.2.16.fc11.i686.PAE.src.rpm No package kernel-2.6.29.6-217.2.16.fc11.i686.PAE.src.rpm available.
I have fedora 13 64 bit installed on my desktop. I have i3-530, 2G ram, wd 500g sata, ide samsumg dvd-rw, asus h55 mb, geforce 9600 low profile. problem is f13 often almost always freezes at boot up.i.e., after grub, that blue heart hangs on there waiting to be filled up.. but wait forever. what might be the problem?
The best word that suits me to introduce is I am a novice! :-) but it is the difficult part get over with the new things and learnings!
Well once such situation made me introduce me to you is "Kernel Crash". I've recently installed Fedora 14 64 bit version on my HP HDX premium series, since then this Kernel crash is chasing me down! code...
I usually don't have problems installing Linux but Fedora won't install into 4 GB for me. I get to the partitioner, try to create a 4 GB partition, actually have 7 GB free, but it tells me there is no space on the drive. As I said, I usually don't get this problem but have not tried Fedora before and don't understand.
I downloaded Fedora-13-i686-Live.iso from the fedora project web site, and did the instruction on how to burn it using dvd. i used nero selecting burn a CD from an image file. after doing that, i restarted my laptop to install fedora 13 choosing to start the boot at the disk dvd but it won't boot to run the installation. instead the laptop will resume booting to its previously installed OS, fedora 9.
i browse the dvd media and there are 3 folders namely EFI, isolinux, LiveOS and GPL file.
For some reason when i write a file to my NTFS-partitioned external HDD the files seem to get severely partitioned. This only happens when writing to it from within Fedora. Windows Vista doesn't seem to do this.
This image is a screenshot from MyDefrag. On my other hard drive i have a 7GB file consisting of 1400 fragments. i'm guessing this is too much fragmented, because it was a completely empty hard drive before it wrote the file.
What could have caused this please? and how can i solve this?
I have installed LXDE recently and I'm very happy with it,but there's one problem,which is that i can't switch the keyboard layout to another language,which in my case is Arabic,how do i solve this problem?
I have a server installed with a Fedora 8 and the other client PC were installed with Windows XP. Recently, I copied an educational courseware (this courseware is developed specially for Windows based PC) into the Linux-based server. I found that the .EXE (application file) :were unable to be opened in all of the clients and also the server. How can I solve this problem?
When I installed fedora 11 I had bad sound which crackled and crashed. I followed this guide -http://forums.fedoraforum.org/showthread.php?t=225660 - which fixed my issues in videos playing on the web and in VLC. However; in the last few days sound has bugun crackling again in VLC while playing videos (web is fine). All updates have been applied and I am running 32 bit Fedora 11.
Also totem when playing video crashes, freezes, crackles etc while playing videos though playing sound files is fine with no issues. Any ideas how I might solve this and get my sound while playing videos back to how it used to be?
I cannot find the C library manual pages on fedora 11. Are info pages the same as man pages? or how can I install man pages so that I can use man 3 malloc?
Ejabberd fails to start in f-12. ejabberd-2.0.5-9.fc12.i686. This ran fine in f-10 and f-11. Getting a large number of strange error messages from the ejabberd log code...
Looks like it may be a permissions problem.
Anybody from the ejabberd community here that has gotten ejabberd to work on f-12?
I am running Fedora 13 with the nvidia blob for OpenGL hw acceleration, everything x86_64. I have spent a couple of days trying to get either Morrowing (TES3) or Oblivion (TES4) working under wine, unfortunately without success.
I have tried several flavors of wine: 64-bit wine from the fedora 13 repo, 32-bit wine from the fedora 13 repos, 32-bit wine 1.3.2 built from source. In all cases, running either of the games I get the same error (using WINEDEBUG=+d3d): "Direct3D requires OpenGL support." Appareantly wine d3d layer can't access to the nvidia OpenGL driver, and therefore d3d is disabled within wine -- making the two games not to start up.
I have tried looking around for a solution, but in all cases I found the root of the problem was missing OpenGL support / missing drivers. This is not my case; I use OpenGL everyday, and hardware acceleration is clearly supported in my configuration (confirmed with `glxinfo | grep direct`).
I think that wine might have problems accessing the 64-bit ogl drivers, but I don't know how to confirm it, and even less how to solve it. Clearly, installing Windows is not an option
I haven't used Fedora or anything except Windows in my entire life. I decided I would wipe my windows machine and try out Fedora 14.
I did a fresh install, rebooted the computer, and inserted a disc containing the following software: Medialink Wireless-N USB 2.0 adapter Model MWN-USB150N. It a wireless USB adapter so that I can connect to the Internet.
I can't get a single file on the disc to open. The disc is fine because it opens on Windows just fine. When I try to load it here I either get: Unexpected Error: Error reading from file. or An error occurred while loading the archive or There is no application installed to run executable files. I can't do any updates I guess until I get connected to the Internet.
