I am addressing the staff that maintains the clamav anti virus software release and distributes it via the fedora repositories: Would you update to the newest clamav version? This is what I get using the installed version:
[Code]...
I have two servers complaining about ClamAV being outdated:
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.96.1 Recommended version: 0.96.3
Doing an aptitude update says I don't have to upgrade anything. Why is this? Must ClamAV be updated manually?
When i run $ sudo freshclam I get this message ClamAV update process started at Sat Oct 9 12:21:22 2010 WARNING: Your ClamAV installation is OUTDATED! WARNING: Local version: 0.96 Recommended version: 0.96.3 DON'T PANIC! Read http://www.clamav.net/support/faq main.cvd is up to date (version: 52, sigs: 704727, f-level: 44, builder: sven) daily.cvd is up to date (version: 12114, sigs: 138436, f-level: 53, builder: sven) bytecode.cvd is up to date (version: 80, sigs: 10, f-level: 53, builder: edwin) Since I am a beginner i don't know how to upgrade freshclam as $ sudo apt-get upgrade doesn't work. Guessing I may have to download the package and install manually just thought I'd ask before doing that.
View 4 Replies View RelatedI'm using debian etch - clamav.clamscan states: >> This version of the ClamAV engine is outdated.<<which is correct, my system is using 0.95.3 in vola you find 0.96
View 2 Replies View RelatedI've scanned my computer (I'm using Ubuntu 8.04 Hardy Heron) and ClamAV has issued it has found a virus called Exploit.PDF-9669. What seems strange to me is that such a warning always happens (or, at least, in the most cases) in the same folder tree "sys" and ClamAV issues the very same virus/malware warning (Exploit.PDF-9669).
An example:
sys/devices/virtual/vtconsole/vtcon0/uevent: Exploit.PDF-9669 FOUND
sys/devices/virtual/net/ppp0/address: Exploit.PDF-9669 FOUND
sys/devices/virtual/net/ppp0/broadcast: Exploit.PDF-9669 FOUND
sys/devices/LNXSYSTM:00/device:00/uevent: Exploit.PDF-9669 FOUND
My ClamAV version is 0.94.2/10275/Fri Jan 8 22:06:46 2010. It has been not updated since I installed Hardy in my computer last year. Is my computer in danger?
I am semi new to UBUNTU worked a bit with it in the passed on vps and that. but i am currentaly tring to make a module for *Zpanel* i am making an anti virus module and am going to be using clamav. up to now everything has been going smoothly but i have hit massive problem.
I am tring to do this:
Code:
And i get this in return
Code:
Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming.
The following information may resolve the situation:
The following packages have unmet dependencies.
I dont get any install. and the information i have collect from people say that and install should not be stopped becuase of an depend
So as any one who is semi new would do i then tried installing the depend
Code:
And i get this in return
Code:
E: Package 'phpapi-20060613+lfs' has no installation candidate
So it look like problem after problem
Does any one know why i can not install php5-clamavlib
I have UBUNTU 11.04 desktop (with zpanel installed on it)
*zpanel an open source web hosting panel for windows and NOW LINUX (zpanel has just been release on UBUNTU ONLY ).
I have a server im trying to use with clamAV to scan it all and with cron job. it worked fine for few days, sending me emails with reports, i was happy. now i get ERR emails and when running manually i get the follwing message output: Script: clamav-cron v. 0.6 - Copyright 2009, Stefano Stagnaro Scanned: /
[Code]...
I have been constantly getting the red "Warning Symbol" that tells me that my "Update information is outdated."Of course I luse Update Manager and "Sudo Apt-get update/upgrade" in Terminal, but this appears after a bit, everytime I reboot. Could this be related to the GetDeb archives being offline (If so, then someone needs to get this fixed; an offline repo is not worthy of a "DANGER WARNING ATTENTION" symbol!
View 5 Replies View Relatedi just tried to install Ubuntu Netbook 10.04 on my old Amilo Lifebook P Series. But after the boot screen and the choice to install Ubuntu i get stuck at the Ubuntu screen with the little dots on the bottom If I hit esc i can see the warning (process 257): GLib-WARNING **: getpwuid_(r) failed due to unknown user id (0)
View 2 Replies View RelatedThis started happening sometime yesterday afternoon on a server that's been trouble free for years.
My Ubuntu update is scheduled to run every month on the 5th, so this was roughly 10 days after that. So it seems to me it's not update related. The only thing I've done on the server lately is update a spamassassin rule which required an amavis restart. That was done earlier in the week.
I've already reviewed issues at [url] and all the conditions are correct for the more recent How to.
I can also confirm that, in fact, /var/run/clamav/clamd.ctl does not exist.
I'm trying to install Fedora10 on my new desktop. It has Windows 7 beta on it and Vista. It starts up fine and I select install. For some reason my wired usb keyboard will not respond unless I press the caps lock button while it loads the begging. (I don't know if another button will work, ive only used the caps button since i can see the light come on) once it loads i skip the disk check and anaconda runs, i get the warning (mini-wm:1462): Gtk-WARNING **: cannot open display: :1 .
View 1 Replies View RelatedI installed TeXlive 2010 and when i compile this command pdflatex it shows the following error:
warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr:/usr/share/texlive:/usr/bin/share/texmf-local/web2c:/usr/share/texmf-local/web2c:/usr/share/texlive/share/texmf-local/web2c:/usr/bin/texmf-local/web2c:/usr/texmf-local/web2c:/usr/share/texlive/texmf-local/web2c:/usr/bin/share/texmf/web2c:/usr/share/texmf/web2c:/usr/share/texlive/share/texmf/web2c:/usr/bin/texmf/web2c:/usr/texmf/web2c:/usr/share/texlive/texmf/web2c.
I tried to install VirtualBox 32 bit on my 64bit Fedora11 OS. I took the 32 bit version as I want to run a 32bit software. I collected all information I could get from other forums. That's what I did: I downloaded and installed [URL]
yum groupinstall "Development Tools"
/etc/init.d/vboxdrv setup
Now I got stucked with the error Qt WARNING: QGtkStyle was unable to detect the current GTK+ theme. I searched for qt or qgtkstyle on my system and found files containing both but don't know what to do here.
I have installed Clamav using the install/remove software utility but it doesn't show up in the Applications menu. I tired to run it from usr/bin folder but still no go.
View 6 Replies View RelatedI have installed CLAMAV in Fedora 11 and when I try to update it says update failed I have tried to find a reason why but unfortunately I am lost. Sony VAIO VGN TXHP1 laptop Fedora 11 Gnome i1568 Wireless connection seems fine.
View 8 Replies View RelatedI am trying to upgrade my clam AV to latest 0.9.6.1. Last times I just uploaded to the server and used RPM command and it was installing. Now I cant find RPM for this ver. So I guess I need to prepare one.
I used the guide here:
Packaging software with RPM, Part 1: Building and distributing packages
by IBM
Changing all wget -> clamav
But when run this I got:
# rpmbuild -v -bb --clean clamav.spec
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.74542
+ umask 022
+ cd /home/myclamav/BUILD
+ cd /home/myclamav/BUILD
+ rm -rf clamav-0.96.1
+ /bin/gzip -dc /home/myclamav/SOURCES/clamav-0.96.1.tar.gz
+ tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd clamav-0.96.1
++ /usr/bin/id -u
+ '[' 0 = 0 ']'
+ /bin/chown -Rhf root .
++ /usr/bin/id -u
+ '[' 0 = 0 ']'
+ /bin/chgrp -Rhf root .
+ /bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ $'
'
: command not found542: line 35:
error: Bad exit status from /var/tmp/rpm-tmp.74542 (%prep)
RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.74542 (%prep)
Is there a better way to create RPMs? or Where do I get RPM for this version? I couldn't find it through their site.
I am looking for explanation:
have two ubuntu 10.10 installations
both have the same update state
both have the same settings in software packet sources[code]....
Still the synaptic has different version of clamav in it, one has 0.96.4 and the other has 0.96.5.Even one other installation of 10.04 has the 0.96.5 in the repository. Why can one installation show different version then the other?
So I finally got ubuntu..I wanted to play team fortress 2.Runs great in wine etc.But 1 problem.It keeps saying my graphic card is outdated.I cant see anything.So I downloaded the driver from nvidia website.Followed some instructions.But it says cannot open binary file or something.Is there any other way to update graphic drivers.Cause I realy still want to play some windows games.Mount&blade, Atlantica online,team fortress 2 etc
View 1 Replies View Relatedi was using mandriva before and fedora is new i have installed clamav antivirus but clamav won update i must change clamd.d and maybe freshlam.conf but how do i that under mandriva clamav-freshclam does the job but here it is different
View 8 Replies View RelatedI get constantly this error, how can disable clamav in SElinux, or there is maybe a rule for it?
SELinux is preventing the clamscan from using potentially mislabeled files (./clamav-366ce73c2b6ad30d9e062d
SELinux is preventing the clamscan from using potentially mislabeled files (/tmp/clamav.577/clamav-9c353ad9c85b
I switched off all updates just because I want to let the system update when I tell her to. But this red triangle in my systray is annoying me terribly a coupe of days after an update which actully forces me to just update it! How can I get rid of the evil red triangle?
View 1 Replies View RelatedI am trying to install clamav from synaptic manager and returns this error: Quote: E: /var/cache/apt/archives/libclamav6_0.96.5+dfsg-1ubuntu1.10.10.1_i386.deb: el subproceso dpkg-deb -fsys-tarfile devolvi el cdigo de salida de error 2
View 2 Replies View RelatedI have been trying to update the gui version 4.10 and the antivirus engine 0.95.1 but to no avail.
View 9 Replies View RelatedI'm replacing my trusty old F5 firewall/mail server with a new(er) F11 box. Using yum, I have these packages installed:
[Code].....
In short, I've written a bash script (available from github) for configuring and removing instances of clamav-server on Fedora (clamd). It lets you create and remove individual instances with a specific user and port (if you specify them) and will install the required packages if not already present on the system and remove them if you want to. In long, we use Clam AntiVirus as our antivirus protection for Digital Preservation Recorder and talk to it over the default port, 3310 (clamd). Installing the clamav-server package under Fedora however, doesn't actually set up an instance. In fact, it doesn't copy any system configuration files into place at all. This means that the system is left without any working ClamAV server out of the box.
Under Fedora, ClamAV server is configured on a per user basis. This is actually quite important (unless you run as root) because the daemon needs at minimum read access (and we've found also write) on the files/directory being passed for scanning. The instructions on how to configure it are located under /usr/share/doc/clamav-server-[version]/ but I have taken these instructions and written a bash script to configure all of this for you. The script is available from github. It can create or remove an individual instance of clamav-server using a specific username and/or port (if you want to specify them, else it defaults to clamav on port 3310). The script will also install any required packages, if you don't already have them on the system. You also have the option of removing the required packages when you remove an instance. The script now also configures freshclam for you (the definitions updater), which needs to run as your user too.
I have installed clamav antivirus,and while scanning it shows the following warning
LibClamAV Warning: **************************************************
LibClamAV Warning: *** The virus database is older than 7 days! ***
LibClamAV Warning: *** Please update it as soon as possible. ***
LibClamAV Warning: **************************************************
And so i have tried to update the virus database as root,using this command
# freshclam
bash: freshclam: command not found
but i cant,can you pls say me how to update the virus database...
Still trying to get that elusive simple mail server. Have install Centos 5 (20 time!) and updated software. Have got the system to see www and now about to do the mailserver thing. One of the first steps is to install Clamav yet this does not show on the package list for the program add delete gui. Tried yum install clamav and got message back that it wasn't available.
Google advises that I must first install rpmforge but at the same time has a warning from the maker of yum that this is dangerous to do Clamav is clearly a very popular antivirus scanner yet Centos 5 does not include it or allow you to install it?
how do i install and update the antivirus? i downloaded it using ubuntu geek help but the console is saying the package is missing.
View 8 Replies View RelatedHow to determine what type of files clamav can scan? For example, if there is no unrar installed it can't scan files in it. So is there any way to find out all types of files that clamav can't scan?
View 2 Replies View RelatedThe mail server keeps getting locked up with tens of thousands of spam emails.So, i followed some instructions similar to this : [URL]I can clear the queue spams, easy, but after an hour or so the server is dead again.. not receiving emails and not sending out emails.
Code:
Received: (qmail 356 invoked by uid 509); 4 Mar 2011 21:39:10 +0800
Received: from 125.110.124.51 by host1.wemotor.com (envelope-from <oiazfkdvd@yahoo.com.tw>, uid 508) with qmail-scanner-1.25-st-qms
Received: from unknown (HELO 202.46.116.119) (125.110.124.51)
[code]....