i was using mandriva before and fedora is new i have installed clamav antivirus but clamav won update i must change clamd.d and maybe freshlam.conf but how do i that under mandriva clamav-freshclam does the job but here it is different
View 8 RepliesI have installed CLAMAV in Fedora 11 and when I try to update it says update failed I have tried to find a reason why but unfortunately I am lost. Sony VAIO VGN TXHP1 laptop Fedora 11 Gnome i1568 Wireless connection seems fine.
View 8 Replies View RelatedI have been trying to update the gui version 4.10 and the antivirus engine 0.95.1 but to no avail.
View 9 Replies View RelatedI have installed clamav antivirus,and while scanning it shows the following warning
LibClamAV Warning: **************************************************
LibClamAV Warning: *** The virus database is older than 7 days! ***
LibClamAV Warning: *** Please update it as soon as possible. ***
LibClamAV Warning: **************************************************
And so i have tried to update the virus database as root,using this command
# freshclam
bash: freshclam: command not found
but i cant,can you pls say me how to update the virus database...
I have a server im trying to use with clamAV to scan it all and with cron job. it worked fine for few days, sending me emails with reports, i was happy. now i get ERR emails and when running manually i get the follwing message output: Script: clamav-cron v. 0.6 - Copyright 2009, Stefano Stagnaro Scanned: /
[Code]...
My probles consists in that i have no idea on how update the clamav. I downloaded it throu center of software. Butt when i try to upgrade it from the gui the upgrading bar reaches only 15% and desapears. I tried do type freshclam from root command line but it just writes that there is not such command. May be i use incorrectly the command line.
View 4 Replies View Relatedi get a notice to upgrade from 0.97 to 0.97.1 clamav. can i do this from terminal? what command do i use to update?
View 3 Replies View RelatedI'm getting an md5 checksum error during updating. Using the update manager. I'll post a snapshot.
Screenshot-Changes applied.png (38.46 KiB) Viewed 219 times
I have a server that is installed with clamav but is not directly connected to internet. Is it possible to update the virus database with following command:
clamscan -d daily.cvd
where "daily.cvd" is the current file available from clamav's website.
Would that change the entire virus database to just that file, or will it update incrementally based on what is already in virus database? Do I need to update main.cvd and daily.cvd as well?
Note, using command "freshclam" is out of the question because I cannot directly connect machine to internet.
how to schedule updates for clamav (every hour)?
View 9 Replies View RelatedIm currently trying to update my Suse 11.1 copy of Linux.
I got some messages that Clamav was not up to date.
I tried to use YUM which I installed on the machine but that did nothing.
It seems that I can only update Clamav by using Klamav.
Whats happening is that the system is telling me that its going to recompile Clamav, starts doing various tasks but doesnt really work.
When I use YUM on my CentOS 5.3 server it simply updates Clamav to the current version and then I use Freshclam to update the virus definitionsdone.
My questions is this; is there anyway to get the latest version of Clamav without going through the that Klamav thing. Klamav seems O.K. for updating the virus definitions but thats all.
Whats wrong with all the Linux software people?
Cant they just get their act together and make their software work. Im also trying to set up a mail server on my Suse 11.1 box but between figuring out how to install Postfix, Dovecot, Cirus-IMAP Im not getting anywhere.
As much as I hate to say this, these things only seem to be rocket science on Linux. I have much less problems installing software on Windoz.
Linux software people need to come up with workable install programs for their software products so more people who arent software experts can make Linux really workable.
I am semi new to UBUNTU worked a bit with it in the passed on vps and that. but i am currentaly tring to make a module for *Zpanel* i am making an anti virus module and am going to be using clamav. up to now everything has been going smoothly but i have hit massive problem.
I am tring to do this:
Code:
And i get this in return
Code:
Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming.
The following information may resolve the situation:
The following packages have unmet dependencies.
I dont get any install. and the information i have collect from people say that and install should not be stopped becuase of an depend
So as any one who is semi new would do i then tried installing the depend
Code:
And i get this in return
Code:
E: Package 'phpapi-20060613+lfs' has no installation candidate
So it look like problem after problem
Does any one know why i can not install php5-clamavlib
I have UBUNTU 11.04 desktop (with zpanel installed on it)
*zpanel an open source web hosting panel for windows and NOW LINUX (zpanel has just been release on UBUNTU ONLY ).
My Windows Installation is infected even with Eset installed! I don't know how to clean it. Already tried safe mode scan, but that doesn't even clean it. The only reason I installed ubuntu was so that I could download infected files without any conserns of my windows parition being infected. When ever I download a file, I move it to the NTFS partition from where windows can access it. But just about a week ago when I booted into Windows, my whole drive was infected, not only windows installed partition but also all my NTFS partition. Can anyone please tell me how can I CLEAN the files rather than qurantine all the files which CLAMAV does!
Also, what steps should I take in advance before downloading a virus infected file? I know the virus could've have gotten in when I disable eset for some software installation but it should clean after boot or after being booted.But there should be a way to clean all my NTFS partition .... how? I don't know how to used CLAMAV properly because whenever I try to scan anything, it always returns with '0 files scan' because I think the directory scan doesn't work the way it should!
I've had previous versions of Clam running and have kept the system uptodate with regular yum updates.
this recently upgraded ClamAV and this will not now start. code...
From googling all i seem to find that it's a make error, but this is a binary install!
I've removed and reinstalled also.
how do i install and update the antivirus? i downloaded it using ubuntu geek help but the console is saying the package is missing.
View 8 Replies View Relateddownloaded clamav and clam-db using install/remove software in opensuse 11.3 gnome.
tried to update virusdatabase typing freshclam in command-line
gives me this:
alexander@linux-y54v:~> freshclam
ERROR: Can't create temporary directory /var/lib/clamav/clamav-7d1c24383b9425dfebb5c660374d507b
Hint: The database directory must be writable for UID 1000 or GID 100
alexander@linux-y54v:
This started happening sometime yesterday afternoon on a server that's been trouble free for years.
My Ubuntu update is scheduled to run every month on the 5th, so this was roughly 10 days after that. So it seems to me it's not update related. The only thing I've done on the server lately is update a spamassassin rule which required an amavis restart. That was done earlier in the week.
I've already reviewed issues at [url] and all the conditions are correct for the more recent How to.
I can also confirm that, in fact, /var/run/clamav/clamd.ctl does not exist.
I have two servers complaining about ClamAV being outdated:
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.96.1 Recommended version: 0.96.3
Doing an aptitude update says I don't have to upgrade anything. Why is this? Must ClamAV be updated manually?
Fedora (2.6.34.6-47.fc13.x86_64) I installed that update, during the installation process it said that it had to remove three packages, one of them was kmod nvidia for the old kernel (Fedora (2.6.33.8-149.fc13.x86_64))After the update finished installing the new kernel, I restarted the system and Nvidia did not load. (I assume because Update manager removed the old nvidia? But I also assumed that a new version would be installed automatically?)I received the following Boot messages:
Code:
Entering non-interactive startup
Starting monitoring for VG vg_user1: 3 logical volume(s) in volume group "vg_user1" monitored
[code]....
I'm confused, if Update Manager removed kmod nvidia, then why does yum say it is installed? And why doesn't the new kernel update work with that version? Or should I install a driver version for that particular kernel? I've read while searching that I need to install a kmod-nvidia for that particual kernel version and that I should login to my previous kernel until that happens, is that the problem I'm having?
Why don't rpmfusion and fedoraproject release the kmod-nvidia and kernel updates at the same time to avoid problems such as this? Does anyone know how long does it usually take for rpmfusion to release the new kmod-nvidia driver for the latest kernel?
I am trying to upgrade my clam AV to latest 0.9.6.1. Last times I just uploaded to the server and used RPM command and it was installing. Now I cant find RPM for this ver. So I guess I need to prepare one.
I used the guide here:
Packaging software with RPM, Part 1: Building and distributing packages
by IBM
Changing all wget -> clamav
But when run this I got:
# rpmbuild -v -bb --clean clamav.spec
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.74542
+ umask 022
+ cd /home/myclamav/BUILD
+ cd /home/myclamav/BUILD
+ rm -rf clamav-0.96.1
+ /bin/gzip -dc /home/myclamav/SOURCES/clamav-0.96.1.tar.gz
+ tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd clamav-0.96.1
++ /usr/bin/id -u
+ '[' 0 = 0 ']'
+ /bin/chown -Rhf root .
++ /usr/bin/id -u
+ '[' 0 = 0 ']'
+ /bin/chgrp -Rhf root .
+ /bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ $'
'
: command not found542: line 35:
error: Bad exit status from /var/tmp/rpm-tmp.74542 (%prep)
RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.74542 (%prep)
Is there a better way to create RPMs? or Where do I get RPM for this version? I couldn't find it through their site.
I just upgraded from fc9 to fc10 via the live cd. All went smooth. I tried to run yum update, but it keeps failing. I thought maybe there was something wrong with the repos, so I copied the repo files from another pc I have that is running fc10 and is able to run yum update.
Still get errors:
[root@sony yum.repos.d]# yum clean all
Loaded plugins: refresh-packagekit
Cleaning up Everything
[root@sony yum.repos.d]# yum update
Loaded plugins: refresh-packagekit
rpmfusion-nonfree-updates | 2.7 kB 00:00
rpmfusion-nonfree-updates/primary_db | 81 kB 00:00
[URL]: [Errno 4] IOError: <urlopen error (101, 'Network is unreachable')>
Trying other mirror.
[URl]: [Errno 12] Timeout: <urlopen error timed out>
Trying other mirror.
fedora | 2.8 kB 00:00
fedora/primary_db | 6.6 MB 00:46
Could not retrieve mirrorlist [URL] error was
[Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
Error: Cannot retrieve repository metadata (repomd.xml) for repository: rpmfusion-free-updates. Please verify its path and try again
[root@sony yum.repos.d]#
I get constantly this error, how can disable clamav in SElinux, or there is maybe a rule for it?
SELinux is preventing the clamscan from using potentially mislabeled files (./clamav-366ce73c2b6ad30d9e062d
SELinux is preventing the clamscan from using potentially mislabeled files (/tmp/clamav.577/clamav-9c353ad9c85b
I am working for Fedora 12 installed on my laptop, and skype has worked. I was able to speak, able to listen and everything (besides some installation problems) was working fine.
Then I allowed Fedora to update(or bugfix or enhacement) some items of my system.
Now when I click on the loudspeaker symbol in the panel and open the mixer I see various tabe for sound input and output. Finally a good idea, and I even have a slide for skype!
But it does not work, I don't hear anything from skype (version 2.1.0.47).
I am able to record and playback via arecord/aplay, so in principal it should work. Any ideas what is wrong? Maybe a bug in a bugfix?
Some more informations for the pros:
The audio stopped working since I upgraded my kernel from 2.6.35.6-45 to 2.6.36.6-48.
Is reinstalling alsa / pulse the only option ?
I'm replacing my trusty old F5 firewall/mail server with a new(er) F11 box. Using yum, I have these packages installed:
[Code].....
In short, I've written a bash script (available from github) for configuring and removing instances of clamav-server on Fedora (clamd). It lets you create and remove individual instances with a specific user and port (if you specify them) and will install the required packages if not already present on the system and remove them if you want to. In long, we use Clam AntiVirus as our antivirus protection for Digital Preservation Recorder and talk to it over the default port, 3310 (clamd). Installing the clamav-server package under Fedora however, doesn't actually set up an instance. In fact, it doesn't copy any system configuration files into place at all. This means that the system is left without any working ClamAV server out of the box.
Under Fedora, ClamAV server is configured on a per user basis. This is actually quite important (unless you run as root) because the daemon needs at minimum read access (and we've found also write) on the files/directory being passed for scanning. The instructions on how to configure it are located under /usr/share/doc/clamav-server-[version]/ but I have taken these instructions and written a bash script to configure all of this for you. The script is available from github. It can create or remove an individual instance of clamav-server using a specific username and/or port (if you want to specify them, else it defaults to clamav on port 3310). The script will also install any required packages, if you don't already have them on the system. You also have the option of removing the required packages when you remove an instance. The script now also configures freshclam for you (the definitions updater), which needs to run as your user too.
Still trying to get that elusive simple mail server. Have install Centos 5 (20 time!) and updated software. Have got the system to see www and now about to do the mailserver thing. One of the first steps is to install Clamav yet this does not show on the package list for the program add delete gui. Tried yum install clamav and got message back that it wasn't available.
Google advises that I must first install rpmforge but at the same time has a warning from the maker of yum that this is dangerous to do Clamav is clearly a very popular antivirus scanner yet Centos 5 does not include it or allow you to install it?
Dell Studio 1555 (Wireless WLAN 1397 Half MiniCard (4312bg)) Wireless doesn't work after update of kernel (kernel-PAE-2.6.38.8-35.fc15.i686)
Quote:
Originally Posted by iwconfig
# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
What should I do to repair wireless?
I use FC9. Yesterday after system update I turned of the computer, but today when it booted the wireless didn't work, ndiswrapper device wlan0:1 does not seem to be present, delaying initialization.I have removed and again installed the wireless driver and looks like it is ok,
[root@localhost utils]# ./ndiswrapper -r bcmwl6
[root@localhost utils]# ./ndiswrapper -i /fatfs/Archiv/Softwere/Drivers/Dr_software/bcmwl6.inf
installing bcmwl6 ...
[root@localhost utils]#
after ndiwwrapper -m
it gives warning( or error )[root@localhost utils]# ./ndiswrapper -m
module configuration already contains alias directive
[Code]....
I am running Fedora 12 with KDE on an Acer Aspire One netbook.
A recent update has caused the KDE shutdown/restart/logout buttons (found for example through the Fedora -> Leave menu or by pressing the power off switch)to stop working. I am having to shutdown using shutdown -P now command.
So I have the following questions:
a) Has anyone else had this issue and knows a workaround/fix?
b) Does anyone know what package these belong to so I can try an older version?
c) Does anyone know where this package writes its logs, or if I need to install anything for it to do so so I can have a look?
d) Does anyone know the command-line interface to these commands - that may give me either a more gentle workaround than shutdown -P now, or some insight into why the command is no longer working.