For some reason, the desktop for Fedora 12 has the following closing tag:
Code:
</body>
<
I have just installed Fedora 12, and I am using GNOME. Even the live disc had the tags. I had assumed that after installing the software to the hard disk I would be rid of the problem. Apparently I was wrong. Google does not seem to bring up a solution. Has anyone else encountered this?
I noticed yesterday, after what must have been the most recent updates, that my display now has a dark striped bar running down the right hand side of the display. It runs between the indicator applet and the deleted items bin on my standard Gnome desktop. I know it's not my monitor since I can see both of those items but maximised applications will not fill this area, even though the cursor is visible there.I've tried changing a number of display options but to no avail.
View 4 Replies View RelatedI've been trying to use MySQL in Ubuntu but I've been having some connection issues and in trying to troubleshoot that, I observed this strange behavior with pings in Ubuntu Desktops inside our network.
- All Ubuntu Servers we have (10.10 and 8.04) behave as expected
- All Windows machines behave as expected
- All 5 Ubuntu Desktops we have, (10.10 and 9.10) exhibit the following unexpected behavior:
If they have a local ip addresses and are connected within the internal network, either to a switch or directly to a router, pings take much longer to be sent. It's not a higher lag, it's the time between each ping that increases. I have to wait for around 5 seconds for each ping, but the time in the ping reply is less than 100ms, also they're all in order so I assume it's the system delaying the sending of each ping.
If I plug a USB 3G modem directly then it works as expected again (~1 sec between each ping sent). Is this an intended feature, that depends on the network environment, or is this something I should look into more closely?
I use Debian Lenny on desktop. On bootup I get this strange message
Code:
Question one: what is hub 2-0:1.0? A utility? A library? A module?
Queston two: what does "enumerate" mean in this context?
Question three: I can't figure out what "port" is meant: a networking port something on the motherboard one of several I/O port/connector/sockets on the back of the computer? (Hope you know what I mean--- you stick USB connectors into them to connect your computer to a USB device, such as a USB mouse.) the one and only networking port/connector/socket on the back of the computer.
Possibly relevant: I sometimes but not always have a USB cable connecting my printer to one of the USB ports/connectors on the back of the computer at boot time. But the message always refers to "port 1", never 2,3,4. due to lack of options for getting on the Net, I use an Actiontek router which demands to be given 192.168.0.1 which would otherwise be taken by my computer, which instead gets 192.168.0.2. (Grasping at straws...)
The computer and system in question is the laptop from my description and openSUSE 11.3 with a different kernel from this repository :[URL]..free to move this thread if it should reside in the beta/prerelease forums section. The IMHO relevant information about my hardware and system is shown below.
The kernel I'm using :
Code:
grzes@opensuse:~> Linux opensuse.local 2.6.37.2-1-desktop #1 SMP PREEMPT 2011-02-25 19:59:41 +0100 i686 i686 i386 GNU/Linux
The hardware and drivers I'm using :
Code:
02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
[Code]...
why the Message-Body is not shown when email is recieved using the PHP Script as given below? However, I can see the Attachment and the Subject Line properly. If I send an email to my Internal ID then everything is fine. But when the same email is sent to an external id such @someOtherCompany then the Message in the Body is not sent. how to seperate the $message varibale from being used in the $header part abd form it in HTML in a way that the Attachment part, and the subject part are not disturbed?
[Code]...
I am running Ubuntu 10.04. for a few emails I receive thunderbird does not display the message body (header is OK). The emails where this happens are always emails where the message is there both as text/plain and as text/html as alternative. If I view the source, everything is there. I have tried to choose View->Original HTML / Simple HTML / Plain Text, but none of them worked.
View 6 Replies View Related- how to add the date/time to the email (message body)
- how to as the user to add a picture
- how add on an error page a button to send it back to the form so that the input does not get lost
Here the program so far:
<?php
/*
CHFEEDBACK.PHP Feedback Form PHP Script Ver 2.15.0
Generated by thesitewizard.com's Feedback Form Wizard 2.15.0.
[code]....
I am new to Ubuntu Forums and Ubuntu OS. I am using Ubuntu 10.04 LTS. I have a problem with Evolution.I am importing my PST file which i was using on MS Outlook 2007. All Emails are imported but body of many emails is missing.
View 2 Replies View RelatedI have started using Evolution because I gave up tying to get Thunderbird or Eudora work. I kept getting "unable to locate mail spool file" when trying to receive mail. I was able to import my mailboxes from my Windows Eudora. But in those mailboxes, about half of those emails had the headers but no body text. What is causing this and can it be fixed.
More importantly tho', when I import my contacts from Eudora, they are a mess, and pretty much unusable. I see a series of rectangles with "alias" on top and "real name" underneath and then when I click on it, expanded below is the alias and email address. There are two of these alias/names per rectangle and they scroll across. Any idea how I can fix that other than manually typing in each address.
Trying to write a small php program to send emails using a form. I have collected all the information in php variables and I can send the mails just fine. But I need some neat and clean formatting for the mail that is received and hence thought html tables would be nice. But all the html tags are received as plain text and not html though I have mentioned in headers content-type to be html. Any links? If anyone can put some light on it? I thought that html tags would just work fine without much issue. I have tried same with asp and it worked.
PS: I am no programmer. Just trying my hands out on some php.
Edit: I am using a php mailer class from php classes to send mails. I need some way to use an external smtp server for sending mails. I have seen pear but I do not want to use pear. It is not available on the server I am testing and it is not possible for me to install it. I do not have access to install pear and can not ask to install it.
I am trying to read the names of hosts from a file and do a ssh to see if processes are all running or not.
Here is the outer loop that is causing problem:
hosts.lst is a text file that has the host names in each line.
The problem is that the loop just breaks after the first run. Somehow while read line becomes invalid when the body of the loop does the ssh and returns.
I have ubuntu 10.04 on my HP Compaq laptop, and use evolution mail. Is there a way to delete an attachment I received, while keeping the rest of the body of that mail?
View 4 Replies View RelatedNot sure how this happened, but can't get back to a 'yum update; yum upgrade' without errors.
View 12 Replies View RelatedI did a minimal install of Fedora 13 (i686), added X Window & LXDE groupinstalls, and xorg-x11-fonts-base, switched to level 5 in /etc/inittab.When rebooting, the First Process indeed starts, but any character seems to be replaced with squares. What am I missing ?
View 2 Replies View RelatedI've added a couple of extra repos in my x86_64 Fedora 11 KDE installation.Namely, skype and rpmfusion and no rawhide stuff.I've asked then to install skype (Skype 2.0.0.72).While I was expecting a lot of packages because skype has decided not to support 64bit environments, I have found some very weird packages within the 79 item list.
View 11 Replies View RelatedMy installation went fine. Apache, PHP, and MYSQL all work independently. My trouble getting PHP to serve MySQL content. The first thing I did was look in the PHP.INI file to check that it was set up correctly. Then I discovered my install of PHP does not have the expected directives, namely extension_dir or any DLL comments where I can enable MYSQL. Instead my config file has a PHP.D directory. In that directory there are no files for MYSQL. I look at the PHP.net site and I can't find any info on how to write this file. And there's the issue of the missing extension_dir directive.
As I said, I visited the PHP.net site and could not find any specific manual pages explaining this change to PHP 5.2.11. I downloaded "the latest php.ini" development file from the site. As near as I can tell its for PHP 6.0.0 and it does have the extension_dir directive, and it still uses the DLLs in Dynamic Extensions section. (EDITED= The introduction of the PHP.INI file doesn't give a version number, however later under error handling there is a note: "as of PHP 6.0.0"). Why I can't find more information about this on any forum or at PHP.net?
When I run dmesg I get
Code:
[drm:drm_mode_rmfb] *ERROR* tried to remove a fb that we didn't own
Does anyone have any idea what that means?
Fedora 12 Gnome 2.28
I used fedora 11 with no problem. Then I did a fresh install of fedora 12. The laptop started making some strange noise something like water dripping or like that. I noticed this long back but I couldn't describe the problem so I waited if I can find something on my own. Even now I'm not sure if anyone can understand whats going on. Just trying my luck. To make sure it was not my laptop( hardware ) problem I went back to fed 11, no strange sounds there. Same thing happened when I upgraded to Ubuntu 9.10 from Ubuntu 9.04. I'm no expert in operating systems. I do not know what is common in Ubuntu 9.10 and fedora 12 , but they are giving the same problem.
View 2 Replies View RelatedI've noticed that when I open firefox I get really strange HTTP and HTTPS connections showing up in firestarter (which as I understand it is just a GUI for IPtables). They connect to various bits of a site listed as 1e100.net (when you use "lookup hostnames") such as wy-in-f18.1e100.net, they stay connected all the time as far as I can see unless I close firefox. I've heard people say they are connected to Google, but I can close all tabs after loging out of google and still see them... it's very odd.
View 3 Replies View RelatedI'm running Fedora 15 with Gnome 3. I installed Gnome-Do using 'yum install gnome-do'. I opened it from the Terminal by typing 'gnome-do' but I keep getting an error message that says
Could not load desktop item: libgnome-desktop-2.so.17
Gnome-Do opens but it doesn't display any application I search for and when I try opening the Gnome-Do preferences, it quits.
I installed gnome-desktop-2.32.0-8.fc16.i686.rpm from here: [url] and then installed Gnome-Do. Everything works fine now.
Could you please help me to get the "Multiple Desktop Windows Icons" back on my KDE desktop panel?I accidentally disabled it by right clicking on bottom left of the panel and now i am not able to restore it back through System Setting > Multiple Desktop
View 2 Replies View RelatedI just installed Fedora 15 with the gnome desktop which looks like the android system for mobile phones, I installed wine which put the icons on my desktop but whenever I install a windows app it doesn't put an icon on my desktop for that particular application. How would I add an icon for those window apps so I can lunch them from the desktop, I don't know if you call that the desktop or just the program luncher either way how do I put an icon there so I can run those windows apps from there?
View 4 Replies View Relatedwhen I turned on my desktop workstation, I found that Desktop icons have disappeared and I can't right-clik the Desktop , aning found any option on desktop like Application,Places and system
View 1 Replies View RelatedI have installed Fedora 13 sucessfully and rebooted my computer for its first run of Fedora. When it comes time to load the desktop I only get the desktop and nothing else. I noticed that my mouse can run off the side of the screen on the left or right. I've tried rebooting and the only thing that changes is which side the mouse runs off.
View 14 Replies View RelatedTrying again here.. no-one on reddit seems to respond..It initially happened here (it was deleted, you can try the lower links.) Sometimes one, sometimes both of these links gets me to 'attack sites', it starts with both, then to one, and then neither does it. I am on Debian Lenny, Both Iceweasel 3.0.6-3(firefox), epiphany2.22.3-9, elinks0.11.4-3 and firefox 3.6.3 sometimes do this for me. It doesn't seem to happen if you enter it into the adress bar, but it does when you follow it by clicking.[URL]..Someone else reported it too, from XP w/ Firefox. The adress bar tells me it is subreddits.org the but the screen doesn't. (Worry my computer is compromised..)
Links it send me too, something on 89.248.174.24, orcug.com, thindx46td.xorg.pl and a whole range of varying other sites. http://i.imgur.com/d7ZGv.png So can you reproduce/any idea what this could be? I do worry about having some malware on firefox and such, also besides this, but as i said, it happens with other browsers. I have add-on flashblock, noscript, redditreveal, socialite, trackmenot, had tree style tab until i found it wasn't usefull enough. I also noticed that control+k gets me to bol.com (wtf is up with that??), and there was the random site you get to when you misclick.(Which i was able to disable.) I am gradually getting more and more pissed off and suspicious about firefox. (as on my computer.)
Firefox also seems start reading/writing from disk suddenly. (I use iotop when i think it shouldn't be writing sometimes.) Perhaps i should try set something up to record what writes to disk.
Anyone know what the 'ls' command means when it outputs the file name in red on black, with the permissions, owner, etc. all missing? The 'man' page was of no help. In the example below, from a DVD ROM, the third file was OK and I could read it. The first two could not be read, even as root.
?--------- ? ? ? ? /media/dvdrom/DVD_RTAV/VR_MANGR.BUP
?--------- ? ?? /media/dvdrom/DVD_RTAV/VR_MOVIE.VRO
-rwxrwxrwx 1 root root 132624 2007-09-20 02:18 VR_MANGR.IFO
I had just set up nginx on my server. I have PHP and everything working okay. Except when I try the URL
http://xxx.xxx.xxx.xxx/123
I get redirected to
http://_/123
but when I try the url
http://xxx.xxx.xxx.xxx/123/
It works just as I want it to. How can I get nginx to treat the slashless url decently?
It scrolls jerky and sometime wont stop scrolling even after i only pushed the up or down arrow one time. it freezes up and take minuets to switch tabs or post to sites etc.Could this be a video driver issue? Or a Firefox issue? I am running Ubuntu 9.10 latest patches on and IBM R51
[Code]...
I downloaded and installed the latest Firefox 3.6 on my Debian machine, but got this strange error when I fired it up for the first time:Code:firefox-bin: 1: Syntax error: "(" unexpected
View 9 Replies View Related