- how to add the date/time to the email (message body)
- how to as the user to add a picture
- how add on an error page a button to send it back to the form so that the input does not get lost
Here the program so far:
<?php
/*
CHFEEDBACK.PHP Feedback Form PHP Script Ver 2.15.0
Generated by thesitewizard.com's Feedback Form Wizard 2.15.0.
[code]....
Trying to write a small php program to send emails using a form. I have collected all the information in php variables and I can send the mails just fine. But I need some neat and clean formatting for the mail that is received and hence thought html tables would be nice. But all the html tags are received as plain text and not html though I have mentioned in headers content-type to be html. Any links? If anyone can put some light on it? I thought that html tags would just work fine without much issue. I have tried same with asp and it worked.
PS: I am no programmer. Just trying my hands out on some php.
Edit: I am using a php mailer class from php classes to send mails. I need some way to use an external smtp server for sending mails. I have seen pear but I do not want to use pear. It is not available on the server I am testing and it is not possible for me to install it. I do not have access to install pear and can not ask to install it.
I am running Ubuntu 10.04. for a few emails I receive thunderbird does not display the message body (header is OK). The emails where this happens are always emails where the message is there both as text/plain and as text/html as alternative. If I view the source, everything is there. I have tried to choose View->Original HTML / Simple HTML / Plain Text, but none of them worked.
View 6 Replies View RelatedI am using cygwin in order to test a bash script that uses the ls -R command. When I use this, the access date of the subfolders are changed, and I need them to remain what they were before the command was run. I don't have access to a legitimate Linux system, so I'm not sure if this is the fault of cygwin or the ls command. The script is being used to find the last access date of all files underneath several subfolders and then return the latest date found in each subfolder as the last access date for that subfolder. For some reason, some of these folders have files in them that are newer than the folder's last access date, so the script is meant to give us a list of the true last access date for these folders.
View 5 Replies View RelatedI'm developing a C++ application which is run on linux. I need to calculate epoch time for a given date and vice versa. (no of seconds elapsed since 1979-01-01) I used the following two methods.I need to convert the given date to epoch time and again convert that epoch time to the corresponding date.But the following methods doesn't give me the correct answer. Method to calculate the epoch time:
Code:
time_t HistoryCache::ConvertTimeToEpoc(const char* _zTime,const char* _zFormat)
{
struct tm tmTime;
strptime(_zTime,_zFormat, &tmTime);
[code]....
My problem is this. Lets think that the value I get as epoch time for the 2010-01-05:000000 is 1262649600. (lTime value) Then I use the same value (1262649600) as a input to the GetTimeStamp method, I didnt get the dateString as 2010-01-05:000000. The date is changed by one day.
I have two different table in a database in mysql that has no share key with each other and I want to sort them with each other on their date time column I mean when I sort it row X of table A that is older that row Y of table B comes earlier.
View 3 Replies View Relatedhere is the problem code using strptime() function.
==================
#include <stdio.h>
#include <string.h>
#include <time.h>
[code]....
Why are the Month and Year so messed up? I am using strptime() according to the man page.
I have log files that everyday are downloaded from my webserver in the format: Code: samplesite.com.xxxxxxxxxxx.gz xxxxxxxxxx is a 10 digit epoch time. I am trying to figure out a way in batch to:
1. find all of exisiting files containing the pattern (after the first run it will only be one a day)
2. Isolate the epoch string
3. convert the epoch string to human readable date/time
4. rename the original file as samplesite.com.mmddYYYY.gz
why the Message-Body is not shown when email is recieved using the PHP Script as given below? However, I can see the Attachment and the Subject Line properly. If I send an email to my Internal ID then everything is fine. But when the same email is sent to an external id such @someOtherCompany then the Message in the Body is not sent. how to seperate the $message varibale from being used in the $header part abd form it in HTML in a way that the Attachment part, and the subject part are not disturbed?
[Code]...
I am trying to read the names of hosts from a file and do a ssh to see if processes are all running or not.
Here is the outer loop that is causing problem:
hosts.lst is a text file that has the host names in each line.
The problem is that the loop just breaks after the first run. Somehow while read line becomes invalid when the body of the loop does the ssh and returns.
I've got fedora 11 set up to use network time protocol to sync my laptop's date & time when I'm on-line. The question is simple really, I've added a local universality's time server (what is public) and it's live. but it's added to the end of the default time servers what come with fedora. How do I get fedora to just use the local time server, is it a case of removing the default time servers for fedora, but there is a box what says advanced options which are. sync system clock before starting service ???? & use Local time source (( is that the same as the local ntp server that I've got set up ))Hope some body can help me with the network time protocol part of Date/Time settings.
View 9 Replies View RelatedI want to synchronize my time to a time server in Singapore. How can i do so with the Time and Date in System - Administration - Time and Date?
View 4 Replies View RelatedI have a problem..
the Date and time are changing all the time...
Meanwhile, I'm set the clock every day, But I must find a solution ... Do you have a solution?
My date and time is not syncing correctly. I have 2 opensuse 11.1 servers and on both when you adjust the time in yast, I go back into yast and the setting for the NTP server is not set and "manual" is checked. I tried many times and the setting keeps reverting back. I always click on Save NTP configuration.
View 2 Replies View RelatedWhy is the output of the following commands different?
root@vmi2115:/var# hwclock
Sun 26 Jun 2011 01:21:38 PM CEST -0.273230 seconds
root@vmi2495:/var# date
Sun Jun 26 15:21:39 CEST 2011
root@vmi2115:/var#
And can I change the current time on Linux?
When I boot up ubuntu 8.10 the time and date are a month behind. Is there anyway of correcting this?
View 8 Replies View RelatedI installed my linux os in vmware.I need to set time of virtual machine to later time( 2005 ).I have an application whose license expires at 2006 so I have to do this in order for it to work .but when I change it it comes back to the current time ,so what is the solution for this .
View 2 Replies View RelatedIf one right-clicks on the date and time tab in Ubuntu 10.10 desktop, then there is no obvious way to change the time. If one right-clicks and goes to help, then the explanation for changing time is as follows under the category 'usage':
2.3. To Adjust the System Date or Time.
To adjust the system date or time that the Clock applet displays, perform the following steps:
1. Right-click on the applet, then choose Adjust Date & Time.
2. Type the root password, then click OK.
3. The Clock applet starts the system tool that sets the system date and time. Use the tool to adjust the date and time.
The actual way to do this is as follows:
Right-click on the date and time applet. select preferences, and down at the bottom of the window that opens push the 'time settings' button.
Then you will be able to adjust that date and time.
rpm -qa --last lists all rpm with date and time. But I want to sort the list by date, with earlier rpm displayed first. So it needs pipe, rpm -qa --last |
View 2 Replies View RelatedI was wondering if anyone has discovered a way of either using cron or by custom scripting, to run a script at a certain date and time only once. The purpose would be to make one-off changes to dns zone files, or to virtual host configs on an apache server, or changing any type of text file at say 12:01am rather than waking up at 12:01am (when our maintenance windows start) to make changes to production servers.
View 4 Replies View RelatedI set my location, but Debian displays DATE in some messed format. I would expect such neat OS to recognize all those local settings based on my location, but that's not the case. It seems that Debian follows locale settings by set language (which is en_us in my case, as I guess in majority uses) or this format is default in any case
I would like to set date/time to DD.MM.YY. hh:mm:ss, and programs that display date data to follow this setting. Simply put, in Windows there is Control Panel and you set location, then OS uses some regional settings, like currency, separators, date/time format.
How do I know the time and date of a file downloaded from the net. Is it possible at all? If I want to know when the downloaded file such as a text file was created ie written by the author if not mentioed at all in the entire document. The command I use locally to know file creation time is given below.
Code:
ls -l filename.txt
-rw-r--r-- 1 root root 691 Dec 3 11:12 filename.txt
In the past, I just edited the /usr/share/gnome-shell/js/ui/dateMenu.js file to alter the date and time format. Today when I tried that, it crashed GNOME Shell and wouldn't let it start..
View 4 Replies View RelatedFor some reason, thunderbird uses some random order for the date elements, e.g. MM/DD/YY. I need to change it to YYYY/MM/DD but haven't found where! There is no option in TB to configure this so I guess it just picks some default from regional settings? Where do I need to go to set the date format to its logical form?
View 3 Replies View RelatedI've noticed that every time this desktop is turned on the date & time are as they were the last time I used it, and then have to put in the correct date & time again (this is why I chose the word 'persistent' within the tittle). When I try to change those have to write in the password for the date as well as for the time as if 'login-in' once were not enough! What I want to know is how to put in the date & time and receive the correct amounts the next time I turn the unit on again, as it should be? Do I've to open a terminal & do it with administrator's authority/credentials?
View 3 Replies View RelatedOn my virtual machine ubuntu 8.10, the date and time settings are not updated every time when I restart the machine.
View 2 Replies View Relatedubuntu 10.10 64bit my system clock keeps running late, and for some reason, I can't use NTP to synchronize it.If I try to use System -> Preferences -> Administration -> Time and date I can't unlock the popup (see attached screenshot) - I can click on the little yellow lock icon but when I do so, nothing happens.I tried "sudo ntpdate..." but i get the "the NTP socket is in use, exiting" error.
View 9 Replies View Relatedthe section where the wireless signal and sound control is?To the left of the time/date in this picture:
View 2 Replies View RelatedSince my clean install of 11.04 using the Unity desktop (takes a little getting used to) I notice I cannot adjust the system clock any more...
I usually configure Ubuntu to sync to an internet time server but this is no longer possible as I cannot open the System Settings > Time and Date dialog.
I've installed 2 different distros on this old dell laptop, install goes fine, i run everything...reboot a few times. perfect, but the next day, when i boot up, i get " date/time" not set, if i choose to ignore that...computer won't boot... is this a battery issue ? the battery wont hold a charge, so i only run it with power pack...works great, but when i turn this on tomorrow, I'll get that w=error messy.
View 4 Replies View Related