So I have Fedora 14 installed on a laptop directly connected to my printer. I really never use the laptop except to send print jobs to it wirelessly. I was wondering if there was a way to make it suspend or sleep, or even idle everything down so it uses less power, but still listen for print jobs?
View 2 RepliesI initially had a problem accessing the CUPS interface (see my other post) and got that resolved by adding the user "cupsys". Now, everything "looks" ok, and when I print a test page, it shows it as completed (in CUPS). However, the page never prints.
The printer is a Canon MP600 (using the canonmp600en.ppd file to configure it). Here's the output of my conf file.
Code:
# Show troubleshooting information in error_log.
LogLevel debug
[code]...
Not sure when CUPS started acting up. I have the latest 13.1 current software installed.The first page to print is always OK, but all succeeding pages are overwritten. The second page shows the first page on top of it, and the third shows the preceding pages on top of it - and so on. Has anyone else seen this problem?I guess the printer buffer is not getting flushed correctly. If my configurations were trashed in some way, I don't know where to look for a fix.
View 14 Replies View RelatedI have 2 printers plugged into a Windows XP PC (an Epson Stylus Photo RX580, and an HP Laserjet 1020) with full sharing on and everything, and is shared with other Windows PCs via the network I have set up. It has worked perfect. But today I added a PC running Ubuntu 9.10 and and can't figure out for the life of me what I am doing wrong. I installed both of the printers via the GUI in Administration, and both of them are detected and Ubuntu says they're working. But when I put something in the queue to print it stays there with the status "pending".
View 8 Replies View RelatedI have a problem with cups dropping print jobs. The machine fedora 13 installation using cups 1.4.4-10
The dropped jobs happen only rarely happen and therefore is difficult to debug the problem since it doesn't happen 99% of the time. This morning (while in the shower) I wondered if the lost jobs are lost because they are timing out, perhaps because of slow input from a user. I can test this more later in the week..
The print jobs are initiated from within a COBOL program. COBOL opens the print file as output and at this stage a job appears in the print queue with a status in the print queue of "held".
The user types in various bits of information and when complete the program executes the final write to the output print file. The job is somehow released and then is physically printed by CUPS. I suspect that if the user is slow the "held" job times out and then the job is lost.
There are a number of timeout directives in cups.conf but I am unsure which might be appropriate in this case. Or perhaps there is some other timeout thing happening.
I have no idea what's going on. I've had this machine running for over a year, and it's been great. A month or so ago, I realized that jobs weren't going to the printer. When i VNC'd in, I noticed that print jobs would show up in the queue as "Processing" briefly, then disappear.
lsusb:
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]....
I've even reinstalled the OS (not just for this reason) to no avail. Printer is dete cted without issue, I just can't use it.
I'm running openSUSe 11.3 on a laptop and the printer is connected to my desktop which is running Windows XP. I have the printer and several folders and drives shared. I can see the folders and drivers on my laptop but I cannot get the printer to actually print. It is an HP printer but I am not using HPLIP. I can send a print job to the queue and the printer resets itself like it's going to print but nothing else happens and the print job just sits in the queue until I hit cancel and restart then printer.
View 9 Replies View RelatedI need to check if I've printed a document. For what I've been reading, going on [URL] and clicking on "Show completed job" should do what I need to do, but it says "No jobs".
View 1 Replies View RelatedWhich commands lists your outstanding print jobs?
View 3 Replies View Relatedmy ERP is sending multiple xml files to my queue and printing daemon reads each files and send it to windows printer (queue) where another software that uses each file and prints one document at a time.I would like to control first part when ERP send XML file I would like printing daemon to send files to windows queue in order the files came in from ERP. Currently it send it in random order. (i think it's based on how fast it can process, size of file..ect)
View 5 Replies View RelatedMy Printer Brother DCP-8045D only prints, when I send the computer (Lenovo X200) to suspend (or shutdown) and wake it up again, whilst a document is in the printer queue.
View 2 Replies View RelatedI have a Brother MFC-295CN network printer. Been having a heck of a time trying to get this thing working since I installed Ubuntu 11.04 yesterday. I've been away from Linux for some time and am new at using it. Downloaded and installed using the Software Center:
mfc295cnlpr-1.1.2.i386-1.deb
mfc295cncupswrapper-1.1.2-2.i386.deb
brscan3-0.2.11-4.i386.deb
brscan-skey-0.2.1-3.i386.deb
Was able to send a test print and it came out fine. But when I tried to send a print job - nothing. And, the scanner won't work either.
My computer is a Gateway GT5464. It's dual booted with Windows 7.
im searching a kde programm to show current print jobs. I've installed aptosid (actual version).I've searched the repository and I only found printer-applet which does not run in aptosid - I got the following error messages:
Code:
Traceback (most recent call last):
File "/usr/bin/printer-applet", line 1161, in <module>
[code]...
Sometimes I want to keep something in PDF files, so I print to the PDF "printer". However, if I inadvertetnly forget to check the PDF creation and rather take the real printer (which is usually only powered up, when I really want to print something), printing goes to the real printers queue and nothing happens ... until, possibly some sessions later, I want to print something (on paper rather than PDF) and power up the printer.
Then all inadvertent garbage comes first and chances are big, that the printer gets junk during power up or reconnecting the cable to the computer and then the whole thing is wasting even more paper, since escape-sequences sent to the printer get chopped and misunderstood by the printer.
In order to stop this alltogether, I am looking for a mehtod, to automatically flush the whole printing queue every time when I log out of my ubuntu session.
I know, there is a command lpq to tell which print jobs are pending, I also know the command cancel -Umyname -a, but this requests for my password. I want to kill all those incomplete or pending print jobs automatically.
And how do I hook such a command script into the logoff or shutdown sequence?
We have a lpr server for printing (not CUPS for compatibility with complicated domain/systems). We configured our linux systems -- RHEL4, RHEL5, and Ubuntu 10.04 -- so that lpr is one of the gtk print possiblities by adding 'gtk-print-backends = "lpr,pdf,file"' to gtkrc. This works great for several gtk-enabled applications like Acrobat Reader (acroread).
However, Firefox 3+ (tested 3.6.3 & 3.0.19) doesn't actually queue any lpr jobs until after quitting the application.
We are running RHEL 5.1 on the 2.6.18.53 kernel. We are attempting to pass print jobs to a Lexmark printer with the lp -o landscape command. The print jobs continue to print "portrait". Is anyone aware of this issue and is there a work-around to get these print jobs to print in landscape format?
View 5 Replies View RelatedI tried using the jobs command in bash in F14 but nothing happens.
Code:
[root@Fedora ~]# jobs -l
[root@Fedora ~]#
Code:
[root@Fedora ~]# which jobs
[Code].....
If jobspec is given, output is restricted to information about that job. The return status is 0 unless an invalid option is encountered or an invalid jobspec is supplied.
If the -x option is supplied, jobs replaces any jobspec found in command or args with the corresponding process group ID, and executes command passing it args, returning its exit status.
Is the jobs command dropped for the ps command instead ?
I have a Fedora 11 box and I am confused about cron, where exactly do I enter the cron jobs? For example, I have a job that needs to run every half hour.
View 8 Replies View RelatedAlthough I've correctly installed Replayer 11, it is not possible to listen to BBC radio via BBC's default player. [URL]
View 14 Replies View RelatedAfter installing fedora 10 KDE, i noticed I can't listen to any music with xmms,amarok,xmms2 etc. Nothing works
I updated everything I believe, it just won't play the files period. I get sound from ..... videos tho, so my flashplayer works. Let me know if I need to be more specific. I really would like to get xmms to work.
I recently purchased a DVB-T PCI (Hauppauge WinTV-HVR-1110) card mainly for television watching purposes, but it also features FM radio tuner. I am now trying to find a software to listen to it. I have only been able to find some really old links and programs that no longer have working links, [URL] scroll down to FM radio software for example. Does anyone know a good working (and preferably still maintained) software for this?
View 7 Replies View RelatedI'm using OpenSuse 11.2 64 bits When I try to listen to music in Grooveshark Grooveshark - Listen to Free Music Online - Internet Radio - Free MP3 Streaming I can listen fine, and it seems to work ok, when suddenly the sound of the website stops to work, my processor gets overload and I've to reopen the site to continue to listen. I get the following message in kernel (I'm no sure if it's related)
[ 3402.591674] ide-cd driver 5.00
[ 3402.622010] ide-gd driver 1.18
[ 3402.691580] st: Version 20081215, fixed bufsize 32768, s/g segs 256
[ 3404.308048] end_request: I/O error, dev fd0, sector 0
Some Hardware Info:
[Code]...
I need to review what people are using the printers for at work.I was wondering how I can do this under fedora. I basically need to store a copy of the printed jobs and view them afterwards..
View 5 Replies View RelatedI cant play any music in listen music player but I do have gstreamer as rhythmbox plays any mp3 so whats the problem I don't get it and yep I am not so experienced.
View 3 Replies View RelatedI am trying to figure this out and it seems I can't So, I have a server which hosts various domains, each domain with multiple subdomains. All websites are set up with "VirtualHost" and they all work properly.The problem I'm having is that if I enter any subdomain of the main domain, I can still reach the webpage.Is there some way of telling apache to DROP / display a forbidden message for all subdomains which are not listed in the VirtualHosts?
View 14 Replies View RelatedOn Fedora 13 is there anywhere else on the system that I have to change to get Apache to Listen to an assigned port, something other than 80. Suppose for instance I wanted Apache to Listen on port 94. I told by the site that their router is forwarding apache to port 94. That doesn't mean I change the Listen in httpd.conf. correct. Apache is still expecting connection on port 80 but in this case 80 then gets forwarded in the router to 94. This is my understanding.
View 5 Replies View RelatedWe're using condor at work to have cluster processing of java jobs. I know how to tell condor to require that a given job should be run on a particular slot. You can put on the Requirements string in the submit file a "Name" value(s) -->
Example:
Requirements = ".. Name == slot1@host*.domain.net || Name == slot2@host*.domain.net"
Which would tell condor to only run that job on slots 1 or 2. But what I need next is some way to have condor modify the arguments string depending on the slot it used. Our condor blades have 8 slots per machine but only two CUDA Tesla cards per host, so I want to dedicate slots 1 and 2 for using the Teslas and slots 3-8 for not using CUDA.
My java code has a java '-D' property so I can tell it to use CUDA or not, but then I
have to have a way to configure condor to append that to the job arguments if
the slot is 1 or 2 or not append it otherwise; So I want this arguments list passed for slot1 or 2
"Main.start -Djava.library.path=/usr/local/cuda/lib64 -Dcuda"
and this for slots 3-8:
"Main.start -Djava.library.path=/usr/local/cuda/lib64"
I don't want to just make the developers hack their submit files to put the
-Dcuda on the arguments line in combo with their adding the Name entry for
slot1 | slot2 because that seems error prone to me.
I want condor itself to add the JVM -Dcuda argument when it's slot 1 or 2 to reduce errors because these jobs take a long time and a mistake wastes lots of time.
My server... its CentOS (redhat alike). I need to make the server disable apache server then run mysql command to optimize the databases then re-enable apache server in a specific time daily. Is it possible?
View 4 Replies View RelatedI could not watch films or listen to the music.
When I press search codecs got error: Could not find plugin in any configured software source.
The playback of this movie requires a MPEG-1 Layer 3 (MP3) decoder plugin which is not installed.
The playback of this movie requires a XVID MPEG-4 decoder plugin which is not installed.
I had this problem at first in Fedora 14 KDE. When I try to put it to sleep or hibernate it will go to black screen and then just turn back up. And now on my other computer which runs on Fedora 13. After KDE 4.5.2 update it does the same thing. I think it is same problem but I can't be sure.
View 3 Replies View Related