I was trying to install MySQLbd (a module for python to connect and access MySQL) I followed these steps for installation[URL].. but while I am getting some installation errors. When I try to run $ python set.py build I am getting the following errors (I removed few errors as I can post more than 10000 characters here)
[Code]...
long time user of redhat, first time user of fedora...
Installed fedora 10 to the hard drive (building a new web server, switched from RHEL5)
Started to install everything I need, apache, php, mysql, odbc, iseries access for linux, etc...
Got to the php modules, installed php-odbc, php-mysql, etc... but php doesn't see the mysql module
doing a phpinfo() produces -without-mysql
uninstalled it, reinstalled it (this is all done through kpackagekit so far) - no good
uninstalled and tried to reinstall via yum, no good
all the config files are fine - copied my php.ini from the old server and let the installs create the new mysql ini files
how to get it in ? this is my last step before i can begin pen and vulnerability testing it.
I installed Fedora 12 with package standard of the MYSQL, configured this the same twirling in such a way localhost as in one it schemes with windows VISTA, to put I have others 4 you scheme with windows XP that I do not obtain to have access in the MYSQL. What I have to make pra these you scheme with XP to have access?
View 2 Replies View Relatedi was trying to allow remote access to mysql by following mysql was running perfectly until i got here :
Code:
/sbin/iptables -A INPUT -i eth0 -s 192.168.1.0/24 -p tcp --destination-port 3306 -j ACCEPT
i changed my.cnf bind-address line to : "bind-address = 127.0.0.1" and nothing
[code]....
My Linux server which is running my company website have been hacked. Today I saw a number of clients (customers) with some fun characters entries on my database. Access denial on really clients.
View 2 Replies View RelatedHow do I install the Python module for Gnash?
But apart from that, what basic concept am I not understanding about installing packages on Linux?
I am used to installing packages using package managers - mostly apt-get and zypper. I have occasionally installed from source, often with no trouble. However I recently installed Gnash and discovered that it has a Python binding that must be compiled from source and this has led down a rabbithole making me feel stupider at each turn.
First, I attempt do a ./configure --enable-python in the gnash source dir. This ends up failing with an error that
package pygtk-codegen-2.0 isn't found
The lead developer, Rob Savoye, was kind enough to point me at packages.debian.org, telling me I just need to locate this package. After many failed searches, I found that the python-gtk2-dev package contains this ... file? script? Great, but I couldn't figure out how to obtain the python-gtk2-dev package. It doesn't exist in any of my openSUSE configured repositories.
So I headed to the GNOME site and searched, found that the PyGTK package contains pygtk-codegen. Download the tarball, cd, ./configure, and this fails because I don't have GLIB. After some more searching I use zypper to install glib2-devel (libglib-2.0 was already installed), and now PyGTK fails to configure because I don't have GObject.
Find that, download tarball, cd, ./configure, fail. I don't have gobject-introspection-1.0, apparently. I DO have gobject-introspection installed, and it's version is ≥ 1.0, but that's what the script says.
So I will readily admit I am new to Linux, but I have to be missing some basic step here. Can anyone give me a clue about any of the above? Is it normal to have to install one dependency after another like this? Is OpenSUSE the wrong distro? What would make this process not so horrible?
After trying to upgrade from fedora 10 to fedora 11 gui and yum will not run. When i try to use yum i get a message that module urlgrabber is missing or wrong version. also libssl.so.7 is missing.
No yum options work.
Streamtuner2 installed via yum under either F13 or F14 complains that the pyquery python module is missing. My vague understanding is that it is relevant to parsing some xml. Pyquery doesn't seem to be in rpm form in any of the repositories, but can easily be installed from source:
As root:
Code:
yum install mercurial
As a regular user:
Code:
hg clone [URL]
cd pyquery
python setup.py build
As root, in the pyquery directory:
Code:
python setup.py install
Streamtuner2 works without pyquery, but I'm guessing can parse information about more streams with it.
I've been attempting to set up a LAMP for local web development, which meant installing mysql-server. But now have a problem when trying to run mysql, I get:-
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
When trying to downgrade mysql-server I saw that there are dependency problems between the various modules (but can't recall which). But whichever route I truied the results are always the same.
Thought about trying XAMPP but I note that even has it's problems, is there any way I can get a lamp set up on FC14, or must I give it up as a bad job.
Howver, just been trying to again to fix the problems with downgrading mysql and get:-
Error: Package: mysql-server-5.1.55-1.fc14.i686 (@updates)
Requires: mysql(x86-32) = 5.1.55-1.fc14
Removing: mysql-5.1.55-1.fc14.i686 (@updates)
mysql(x86-32) = 5.1.55-1.fc14
is this command exact or do I replace anything with my own setu
" yum install mysql mysql-devel mysql-server "
who can't tell what has to be changed for "My server name" and "my setup"
I just finish tring to get my mail server running but I get an error in my mail.log
Jan 21 16:33:08 server imapd-ssl: Connection, ip=[::ffff:67.223.78.XX]
Jan 21 16:33:08 server authdaemond: failed to connect to mysql server (server=127.0.0.1, userid=postfixadmin): Access denied for user 'postfixadmin'@'localhost' (using password: YES)
Jan 21 16:33:08 server imapd-ssl: LOGIN FAILED, user=jason@[mydomain].com, ip=[::ffff:67.223.78.76]
Jan 21 16:33:08 server imapd-ssl: authentication error: Input/output error
I have the right password in all the mysql config files and tried to reset the password in the sql database with no luck. I granted perms to all and its still giving me the error.
I'm using ubuntu 10.04 LTS I install mysql..Code: sudo apt-get install mysql-server.I set up my password and confirm,I type mysql at the terminal and i get this back.
View 1 Replies View RelatedI am having some issues getting Bugzilla setup, I have the software on the server and am trying to get the pre-rec's setup.
I am using RedHat 4.1.2-42.
I have all of the required perl modules save one:DBD::mysql
When I try:
I get the following response(this is only an excerpt):
Can't test without successful make Running make install make had returned bad status, install seems impossible.
I'm having a problem with my webdav share. I have a secure webdav folder that gets accessed via a non-standard port and requires basic authentication. I can connect and interact with it fine via cadaver. However, when I try to connect from nautilus, it says "Access was denied." To make it even stranger, sometimes I can click on the folder in nautilus (it still mounts) and access it. Sometimes not (just repeats the error message and won't show me the contents). I may not even un-mount it, but just look at other folder, then click it again and be able to access it, but again - only rarely.
I asked a friend to try connecting from his windows vista computer and it would not work. It would not work from my windows XP virtual computer either. However, it mounts and works just find from my work computer (also Windows XP).
So it seems to be a 50/50 chance that the drive will mount on any given computer/system and work. Do anyone know what the problem may be? I'm guessing user permissions, but I can't figure out what.
I've made sure the webdav folder is owned by www-data and www-data has read access to the password file as well.
When I try connecting from nautilus, I get this in the log file:
Code:
Here is one of the (many) sites I've tried looking at: [url]
I set up mod_proxy in order to get rid of :8080 now I cant access phpmyadmin through the browser. what is the quickest way to turn off mod_proxy and access phpmyadmin? I would like to optimize the tables and back up the sql file. I just need to turn it on for a bit, and then enable mod_proxy again.Right now, if I got to localhost/phpmyadmin, it redirects to the main application.
I have used a2enmod, and added
sudo a2enmod proxy
sudo a2enmod proxy_http
sudo a2enmod proxy_ajp
[Code]...
When you access mysql within the same Apache server (same ip address) via php, do you need to GRANT user ip in order to login to mysql?
Where are the log files for php, mysql etc?
I'm running an Ubuntu 9.04 Minimal server and trying to get MySQL to work correctly. But when I try to access MySQL with the root user it doesn't want to.
Code:
mysql -u root -p
Enter password:
[code]....
I erased Windows a week ago and is loving Ubuntu 10.04 (which changed to xubuntu after installing Qimo for Kids??) ever since. Now I want to get coding again and PHP is working fine, but I can't access mysql!?I followed a ton of guides, completely removed, reinstalled etc. Nothing works.Here some stuff that might be interresting. I can't remember the "ls" and "awk" and "grep" commands to use, so please guide me if you need more info.
sudo mysql status
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
sudo update-rc.d mysql defaults
update-rc.d: warning: /etc/init.d/mysql missing LSB information
[code]...
I've looked everywhere for this (simple) problem, and I can't get this working. I have a mysql server on my LAN which is accessible from within the server.I want to access the mysql server from another computer on the LAN, but it never works.
View 7 Replies View RelatedI have a webhost payed and i want to connect it with my server database. It shows me this error on the website : Lost connection to MySQL server at 'reading initial communication packet', system error: 110
I tryed to open port 22...noone of sollution work to me.or someone who's good on that???
I think this goes here, but I'm not sure. I decided that XAMPP had been troublesome enough. MySQL never worked. So I decided to instal the LAMP stack offered by YaST. I went about installing it thinking that it would all work. But it seems that I was wrong. So I try to start mysql, and here's what I get:
Code:
the-matrix:~ # mysql start
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2) or
Code:
the-matrix:~ # rcmysql start
Starting service MySQL warning: /var/mysql/mysql.sock didn't appear within 30 seconds
chmod: cannot access `/var/run/mysql/mysqld.pid': No such file or directory
[Code]...
We started our project (it's a website "employee performance appraisal system") in windows by starting with some html forms and then slowlyadded php ,javascript and other stuff in windows we had no issues of insertion and retrieval of data from thedatabase.Now,we decided to shift the entire stuff to drupal the html forms along with those php files but we had 2 issues with this1. the first one was ..we created "page" for each html form and copied the html code into "page" but we didn't find where our pages are getting stored (do they get stored in mysql database that we create for drupal siter do they remain as html pages somwhere?)2.second problem was ...for admin in drupal I gave the username "root" and a password ..similarly for mysql also I gave a password.
now I used phpmyadmin and created another database called "appraisal" which is supposed to hold the data of our website.when I try to insert data into one of the tables of this database (attendance table) ,the following error occured "Attempt to connect failed access denied for user 'root'@'localhost'(using password:NO) cannot run querry insert intoattendance values('x','y')" Access denied for user 'root'@'localhost' (usingpassword:NO)Also I'm unable to access mysql as a normal user only super user can access and can we unset the password that's required to reach mysqlprompt?
One server is a dedicated MySQL server. After upgrading that one to Ubuntu 10.04 (from an ancient Suse 9.2), both servers are running Ubuntu 10.04 LTS.I have another server that I use to administer the database server via phpMyAdmin. However since the upgrade it is not able to connect. I get an error #1130 Cannot log in to the MySQL server. The same happens if I try to connect remotely from the command line with: mysql -u root -h 129.79.137.121 -pI'm not sure if this is an iptables/ports problem or a configuration problem on the MySQL end or something else entirely.I've searched and tried the suggestions I've found in various places but none seems to have fixed it.
View 2 Replies View RelatedI configured the server freeradius with mysql and I think I configured well freeradius and mysql but when I m testing my configuration with:
radtest nezar azerty 127.0.0.1 0 azerty1234
I have always:
rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=108, length=20
A few days ago, I ordered a ubuntu server (on ovh.com). Everything was going well until I installed mysql: After the install, I tried to connect throught Navicat MySQL using SSH, but it says that the user or password it's not correct, obviusly this is not true. I've been reading and I readed that I have to open the 22 port to use MySQL in the firewall, but I don't know how to do it.
View 3 Replies View RelatedI am running a server with Ubuntu 10.04 and mysql v.5.4.41-3ubuntu12.1.I am unable to connect to my mysql server remotely, (error 111). I have added the port 3306 to iptables. It is able to connect to the loopback address (127.0.0.1) but not through its external address.
View 2 Replies View Relatedi am using liferay5.2(mysql included in the download pack) on fedora. while liferay is working fine but i cannot connect to mysql.i am getting the error
[
[root@localhost ~]# ln -s /var/lib/mysql/mysql.sock /tmp
[root@localhost ~]# /etc/init.d/mysqld start
Timeout error occurred trying to start MySQL Daemon.
[code]....
i didnt find the mysql.sock file in the location /var/lib/mysql/mysql.sock. i cannot find the portal-ext.properties file also to make intial settings.
how to do Mysql, PHP, Apache installation configuration, module/library update
View 2 Replies View RelatedI am up and running. Symptom: webapp/servlet deployed to Tomcat, utilizes JDBC driver for MySQL connectivity. Upon launching application in browser and performing action requiring database interaction, exception thrown, server log:
[Code]...
I have Virtualbox setup
WinXP Host
Ubuntu 10.04 is the guest
Mysql is installed in ubuntu and it works fine in the guest (ubuntu)
Internet works fine in the host and the guest. Bridged Network.
Now, here is the thing... i want to access mysql from my host to load some data into it.
how do i access mysql from my host Win XP?