i installed phpmysql on F12 and it keeps prompting me for a user name and password. i tried login in with my root password but it does not permit me. How do i bypass this please. Also Aache wont let me view other locally hosted sites on my derver directory. restricts my permission.
View 1 RepliesI have an issue viewing my hosted webpages via wired connection on the same network as the server. I can view them via wireless without a problem but wired times out.
View 8 Replies View RelatedMy daughter wants to build a little website that looks a bit like a magazine for her family and select friends. Front page has links to stories or articles she'll write. She would also like to post some pictures for people to see and maybe have people add comments if they like. I'd like to host it locally on our home server and limit access with an id and password. I would use something like DYNDNS.com to point family and friends to our server where they could login. I have an Ubuntu Lamp server setup to install what we need.
View 4 Replies View RelatedWhen i starts it for the first time,my sites getting loaded fast when requested through browser,but slows down gradually. what could be the reason, my cpu load seems ok. Because i have another site hosted through apache in the same server and its getting loaded fast. so what could be the issue.
View 1 Replies View RelatedI have ran into a really strange issue. for some reason when I go to view any website that's hosted on my slackware 13.0 box it comes up with cannot be displayed, but when I rename the current index.php or index.html to backup then create a whole new index.php or index.html with just a few words or some basic html it will display but once I start adding in other coding for images or stuff like that, it goes back to page cannot be displayed
View 1 Replies View RelatedIs there a way you can view all domain names hosted on an IP address using dig or whois? Say if a server is using Name Based hosting??
View 5 Replies View RelatedI have just tested this 3 times now and everytime I got the same result. I have two identical servers, they are both IBM x345 and everything has been copied directly from one to the other so they are exact duplicates other than the hard drive and partition sizes. When copying over the /svn directory it looks like everything copied successfully (I have tested rsync and cp) but when I go to look at the files locally there is nothing there. I can view the files without issue over the nfs share that I am using to copy the files but nothing is there locally. Even df shows that there is nothing there. The other server on the network shows the files there and using du I can see that the size is correct on all of them.
Before anyone suggests this is a permission issue, I was using root to see if the files are there but even root does not see anything. I am completely lost on this and even google does not seem to come up with anything. The servers are running fedora 12, the /etc/exports file is placed below.
Code:
/ export 10.0.0.201(rw,no_root_squash)
Kernel: Linux 2.6.26-2-686 (i686)
Compiled: #1 SMP Thu Nov 25 01:53:57 UTC 2010
C Library: GNU C Library version 2.7 (stable)
Distribution: Debian GNU/Linux 5.0.8
Desktop Environment: GNOME 2.20
Gnome comes with Vino Remote Desktop as part of it's package. I want Vino to run at boot so that I can login remotely. I am using VNC-4.1.3 for remote viewing. However, I can only view remotely once I have logged-in locally.
I will be doing actual development and testing on the same machine as the server. It is a single user machine in the sense that I will be the only one working on the machine. There will be multiple hosted languages, specifically PHP and RoR while possibly expanding later. I'd like the setup to translate well to a production environment. With those 3 things in mind there are a couple of things I've had in the back of mind.Seeing as it's a single user machine I haven't been able to decide whether or not I should be working on things out of my home directory or if they should be located outside of it.I'm feeling that outside of a user directory would be better as it would translate better to a production environment, but I'm also not sure if that will come with any permission annoyances or concerns seeing as I'll be working on the same machine. Hosting multiple languages seems like it may be a bit quirky. With PHP I've found you're generally just dumping the project somewhere in the document root where as something like a Rails app you have the entire project and you only want the public directory in the document root.
View 1 Replies View RelatedDoes anyone know of a tutorial or site where I can learn how to monitor what sites people have been accessing on a network?
View 1 Replies View Relatedi have a question about rpm.pbone.net, www.rpmseek.com and these kind of pages: Can I trust these sites and is it secure to install rpms from these sites on enterprise workstations and servers?
View 1 Replies View RelatedI have rhel5.4 in my vmware , i am trying to install yum repositories in /home/Server bcoz i dont have enough space in /var/ftp/pub. i installed vsftpd ,createrepo rpms and index is installed, but when i check for yum list its saying cannot change directory.
View 1 Replies View RelatedIf you use Nautilus then you can just use the "Connect to server" from the file menu. However if you file manager does not support connecting to servers (like Thunar ) then you can use sshfs.
Code:
sudo apt-get install sshfs
You should create a directory as your mount point, say
Code:
mkdir /media/Server
[Code]....
we have a dual server setup: Windows server 2003 and Ubuntu 10.04 with apache installed with all the goodies. This is all virtualized. What I'm wanting to do, is make the new website we've created run on the Ubuntu machine, which it is, and be accessible outside the office. However, by doing this, we forfeit being able to use remote access or web exchange on Windows server 2003.
How can I create a link from the new website on Apache point to the internal server and it work outside of the office?
Does anyone know if you switch networks Where you have your servers hosted on a Non-DHCP Network, and you switch your IP addresses, then do you have to switch change/assign your new gateway address? I'm not sure if its manually assigned? How do you do it? Also what about nameserver resolving?
View 2 Replies View RelatedSo, I have a website that is hosted at Godaddy and I've set up a database with the ability to access it remotely. I was wondering if there is an easy way to set up an automated back-up of said database at Godaddy, to my local server.
View 2 Replies View RelatedContinuing with my assigned task of migrating the company's PCs to GNU/Linux (openSUSE as server for GNU/Linux clients) I managed to set up a DC with roaming profiles for the few remaining Windows users, user validation and login for the openSUSE boxes and a few network shares with different rights. I know there are no roaming profiles for GNU/Linux and I can live with that but I would like to specify wich users/groups would have their home directories saved locally (notebook users) and which will save them on the Samba server.
By default home directories are saved locally but somehow Samba creates a minimal home directory for each user under /home in the Samba server. How can I tell the client box to use that directory? and how can I set up the few notebook users to save it on their disks? Maybe using the options under Yast > Security... > Users and groups management > Users (LDAP Users filter) > and then select the user and use the "Manage Samba account parameters" plug-in for specifying the different paths cant achieve this.
I am installing a program on a server as a non-root user. Specifically it is tmux 1.5, but this should apply broadly to all locally installed program in my opinion (I mention the program name in case this problem ends up not being my own error).
The program requires me to install some dependent libraries (e.g. libevent and ncurses). So, I installed them both locally since I do not have root access
cd $HOME/library/installation/folder
DIR=$HOME/local
./configure --prefix=$DIR
#... make ... make install
[Code]....
Ok, so this installs the program without problems into $HOME/local/bin, but if I run the executable: $HOME/local/bin/tmux , I get the following error:
tmux: error while loading shared libraries: libevent-2.0.so.5: cannot open shared object file: No such file or directory
It would seem to me that the program cannot find the desired libraries, but the file libevent-2.0.so.5 does indeed exist in $HOME/local/lib as specified in the configure options. I am wondering how I can get the program to recognize the installed library in order to run. I tried putting symbolic links in $HOME/lib, $HOME/bin, and $HOME/local/bin, but none of these worked.
I want to check my system general log file by the following command.
PHP Code:
It just show me only these two lines Normally every day at morning I check all system general log files and some times it is too much long that I press space bar to go my prompt.
I'm adding a GUI to my server for specific admin tasks (Xubuntu desktop), and the major one I have in mind is MythTV setup, which uses X server. How can I run an X session locally? Ie. I'm looking to VNC into my server, then from there start an app that displays mythtv-setup in an X environment.
View 3 Replies View RelatedI have installed Fedora 12 x86_64 and vsftpd. I would like to set up an user for FTP so that he/she could only view/edit files in one certain folder (the one that I set up). How would I go about doing that?
View 2 Replies View RelatedThere's a way to login directly using rdesktop, instead of logging locally using the gnome session manager? Like, starting x, then typing a user and pass to login direct in a Windows server?
View 8 Replies View RelatedI dual boot XP and FC14 and have 2 routers. I can connect and ping one of these routers when I'm in FC and I have an IP address I just can't load any websites. When I connect to the other router (my main router) it works fine. When I boot into XP and connect to the problem router I can load pages fine. It's only when I'm on FC14 and connect to the problem router that I can't load pages even though I have an IP and can ping around.
View 1 Replies View RelatedI have an Ubuntu Server, a dyndns account and an account with [URL]. My DynDns stuff is all working just great - novo.dyndns.tv is the address. Now I need a domain which I have already bought, to be linked to that machine at [URL] I signed up with freedns.afraid.org and now I am a bit confused at what records to add where. I added a domain - [URL] then setup a webforward as follows: redirect from [URL] and redirect from[URL] to [URL] , however if you go and visit:[URL] you will see my problem! It takes you back to [URL] server and says there is not a webforward setup for [URL]This tells us that the nameservers are all setup fine - and its something in my freedns config which is failing.
View 4 Replies View RelatedI'm trying to setup postfix (or exim, I don't mind which), so I can move away my last remaining PC from Windows.I've tinkered with Postfix for good part of a month and I can get it to accept emails using SMTP and post them to a virtual mailbox based on MySQL tables. And it rejects mail addressed to local email addresses that it can't find in the table.
First question (or problem.) I've set up Postfix to relay email it cannot deliver locally such as is the case when you send out an email. My remote host requires authentication. How can I set this up?
Second question: I want to force my clients to use either AUTH, TLS or SSL, and not allow anonymous connections (to prevent an open relay server.) How do I set that up without interfering with the smarthost setting? The smarthost login is not one of my clients, it's a pre-determined login and password that is solely used for the email relaying aspect.
Webmin running two websites from one server, i've made a second virtual server for my second site including its own document root with it's own index.html file ,but for some odd reason they both run the same site. And i use a Static ip address.
Sites:
[URL]
I've spent days trying to setup access properly from a public address to a monitoring server that works fine locally. Everything works from public access until I try to link to a CVS repository. The rancid CVS repository is set up as a separate server (virtualhost). It appears the referring link causes a DNS error (105: Server Not Found) when the CVS repository server is accessed from the public address. Things work fine when accessing via localhost.
Localhost link:
[URL]
Public link: (this results in 105 error caused by redirection (bold portion of link))
[URL]
Code:
Virtualhost config:
LoadModule jk_module /usr/lib/apache2/modules/mod_jk.so
JkWorkersFile /etc/apache2/workers.properties
JkLogFile /var/log/apache2/mod_jk.log
[code]....
not blocking sites
Code:
dbhome /var/lib/squidguard/db
logdir /var/log/squid
dest block {
domainlist block/domains
[Code]....
under db I created a directory block where I created a domain file and a urls file dosen't seem to be working
I have just joined this respective forum and I have a issue with website hosted on Virtual Redhat Server. Scenario is like this I have three virtual redhat server(R1,R2,R3) 5.0 on VMware workstation 7.0 installed on window 7(physical machine), on R1 I have DNS server , On R2 I have Apache web server and I have hosted a website called "geekgadget.com" just for testing purpose, R3 is just a normal server nothing installed on it yet..
Problem : I can access my website [URL] from all of my three virtual redhat server but when I try to access it from some of my physical XP,window 7 machines as well as from virtual XP machine present on my local LAN, website cannot be accessed so I am not getting the point why it happens because I checked that my port 80 is listening.
In the past week or so I've noticed some weird network behaviour. I find accessing some sites such as Amazon, Paypal, and Bigstockphoto really slow. Sometimes the page will not load at all. Other sites are fine. The problem sites are not a problem for others on my LAN at home. When I try to open the problem sites, I can see in Firestarter blocked connections coming from 2.1(8/9).xxx.xxx on various ports such as 36007. This only happens for the problem sites. I attached a typical output from firestarter.
This happens with Firfeox or Chrome. Using Ubuntu 10.10